! Started logfile: /scr/pima/bg219g_uvs/J1305-3132_X_dfm.log on Thu May 19 21:46:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1305-3132_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1305-3132_X_uva.fits
! AN table 1: 31 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896057 visibilities/baseline/integration-bin.
! Found source: J1305-3132
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1305-3132_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009461Jy  sigma=18.706469
! Fit after  self-cal, rms=0.862411Jy  sigma=15.930282
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.598 mas, bmaj=1.797 mas, bpa=-5.069 degrees
! Estimated noise=0.70368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108454 Jy
! Component: 100  -  total flux cleaned = 0.132367 Jy
! Total flux subtracted in 100 components = 0.132367 Jy
! Clean residual min=-0.005476 max=0.013540 Jy/beam
! Clean residual mean=-0.000002 rms=0.001751 Jy/beam
! Combined flux in latest and established models = 0.132367 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.132367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092581Jy  sigma=1.516435
! Fit after  self-cal, rms=0.092502Jy  sigma=1.515160
! Inverting map 
! Added new window around map position (8.2, -21.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112186 Jy
! Component: 100  -  total flux cleaned = 0.016198 Jy
! Total flux subtracted in 100 components = 0.016198 Jy
! Clean residual min=-0.004823 max=0.008059 Jy/beam
! Clean residual mean=-0.000000 rms=0.001350 Jy/beam
! Combined flux in latest and established models = 0.148565 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 22 components and 0.148565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090824Jy  sigma=1.479466
! Fit after  self-cal, rms=0.090708Jy  sigma=1.475380
! Inverting map 
! Added new window around map position (1.4, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0075307 Jy
! Component: 100  -  total flux cleaned = 0.0116926 Jy
! Total flux subtracted in 100 components = 0.0116926 Jy
! Clean residual min=-0.004002 max=0.005606 Jy/beam
! Clean residual mean=0.000001 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.160258 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.160258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089999Jy  sigma=1.459521
! Fit after  self-cal, rms=0.089970Jy  sigma=1.458004
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.787 mas, bmaj=2.219 mas, bpa=-4.439 degrees
! Estimated noise=0.340268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004123 Jy
! Component: 100  -  total flux cleaned = 0.00624486 Jy
! Component: 150  -  total flux cleaned = 0.00746092 Jy
! Component: 200  -  total flux cleaned = 0.00766636 Jy
! Total flux subtracted in 200 components = 0.00766636 Jy
! Clean residual min=-0.002809 max=0.003186 Jy/beam
! Clean residual mean=-0.000003 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.167924 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.167924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089806Jy  sigma=1.453804
! Fit after  self-cal, rms=0.089799Jy  sigma=1.453510
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.787 x 2.219 at -4.439 degrees (North through East)
! Clean map  min=-0.0026671  max=0.13403 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.08     KP        1.02     
!   LA        1.01     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.05     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.19     KP        0.97     
!   LA        0.97     MK        0.95     NL        1.09     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.13     KP        1.01     
!   LA        0.93     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.09     KP        1.01     
!   LA        0.91     MK        1.04     NL        1.08     OV        1.04     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.07     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.97     
!   PT        0.88     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.99     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.04     OV        0.92     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        1.02     
!   LA        0.94     MK        1.01     NL        1.09     OV        0.91     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.11     KP        1.04     
!   LA        0.93     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.15     KP        1.00     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.03     OV        0.94     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.09     KP        1.02     
!   LA        0.86     MK        0.97     NL        1.06     OV        0.96     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        1.15     KP        1.05     
!   LA        0.98     MK        0.99     NL        1.07     OV        0.97     
!   PT        0.95     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.089799Jy  sigma=1.453510
! Fit after  self-cal, rms=0.090975Jy  sigma=1.444999
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7872 mas, bmaj=2.208 mas, bpa=-4.345 degrees
! Estimated noise=0.34161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000835046 Jy
! Component: 100  -  total flux cleaned = -0.00102024 Jy
! Component: 150  -  total flux cleaned = -0.0011374 Jy
! Component: 200  -  total flux cleaned = -0.00121054 Jy
! Total flux subtracted in 200 components = -0.00121054 Jy
! Clean residual min=-0.002117 max=0.002254 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.166713 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.166713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090945Jy  sigma=1.444525
! Fit after  self-cal, rms=0.090972Jy  sigma=1.444288
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090972Jy  sigma=1.444288
! Fit after  self-cal, rms=0.091215Jy  sigma=1.444207
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7871 mas, bmaj=2.207 mas, bpa=-4.339 degrees
! Estimated noise=0.341373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000741751 Jy
! Component: 100  -  total flux cleaned = -0.000829572 Jy
! Component: 150  -  total flux cleaned = -0.000904725 Jy
! Component: 200  -  total flux cleaned = -0.000904352 Jy
! Total flux subtracted in 200 components = -0.000904352 Jy
! Clean residual min=-0.002031 max=0.002225 Jy/beam
! Clean residual mean=-0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.165809 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 56 components and 0.165809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091196Jy  sigma=1.443912
! Fit after  self-cal, rms=0.091186Jy  sigma=1.443871
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, -8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120889 Jy
! Component: 100  -  total flux cleaned = 0.00099881 Jy
! Component: 150  -  total flux cleaned = 0.000741938 Jy
! Component: 200  -  total flux cleaned = 0.000545639 Jy
! Total flux subtracted in 200 components = 0.000545639 Jy
! Clean residual min=-0.001911 max=0.001905 Jy/beam
! Clean residual mean=-0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.166355 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.166355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091122Jy  sigma=1.443122
! Fit after  self-cal, rms=0.091102Jy  sigma=1.443070
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091102Jy  sigma=1.443070
! Fit after  self-cal, rms=0.090908Jy  sigma=1.442978
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7866 mas, bmaj=2.204 mas, bpa=-4.314 degrees
! Estimated noise=0.34062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.70712e-05 Jy
! Component: 100  -  total flux cleaned = -0.000187006 Jy
! Component: 150  -  total flux cleaned = -0.000298578 Jy
! Component: 200  -  total flux cleaned = -0.000350556 Jy
! Total flux subtracted in 200 components = -0.000350556 Jy
! Clean residual min=-0.001890 max=0.001990 Jy/beam
! Clean residual mean=-0.000001 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.166004 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.166004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090883Jy  sigma=1.442710
! Fit after  self-cal, rms=0.090874Jy  sigma=1.442694
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104572 Jy
! Component: 100  -  total flux cleaned = -0.000152333 Jy
! Component: 150  -  total flux cleaned = -0.000196308 Jy
! Component: 200  -  total flux cleaned = -0.000217331 Jy
! Total flux subtracted in 200 components = -0.000217331 Jy
! Clean residual min=-0.001861 max=0.001975 Jy/beam
! Clean residual mean=-0.000001 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.165787 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.165787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090860Jy  sigma=1.442536
! Fit after  self-cal, rms=0.090855Jy  sigma=1.442528
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090855Jy  sigma=1.442528
! Fit after  self-cal, rms=0.090743Jy  sigma=1.442490
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.186 mas, bmaj=6.675 mas, bpa=2.318 degrees
! Estimated noise=0.43401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.80399e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157569 Jy
! Component: 150  -  total flux cleaned = 0.000211301 Jy
! Component: 200  -  total flux cleaned = 0.000278965 Jy
! Total flux subtracted in 200 components = 0.000278965 Jy
! Clean residual min=-0.002411 max=0.001991 Jy/beam
! Clean residual mean=-0.000002 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.166066 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 94 components and 0.166066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090740Jy  sigma=1.442489
! Fit after  self-cal, rms=0.090741Jy  sigma=1.442481
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.89327e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147395 Jy
! Component: 150  -  total flux cleaned = 0.000204721 Jy
! Component: 200  -  total flux cleaned = 0.000257687 Jy
! Total flux subtracted in 200 components = 0.000257687 Jy
! Clean residual min=-0.002429 max=0.001991 Jy/beam
! Clean residual mean=-0.000002 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.166323 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 97 components and 0.166323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090740Jy  sigma=1.442516
! Fit after  self-cal, rms=0.090741Jy  sigma=1.442509
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7865 mas, bmaj=2.203 mas, bpa=-4.31 degrees
! Estimated noise=0.340102 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7865 x 2.203 at -4.31 degrees (North through East)
! Clean map  min=-0.0018254  max=0.13498 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5976 mas, bmaj=1.785 mas, bpa=-4.874 degrees
! Estimated noise=0.70447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10836 Jy
! Component: 100  -  total flux cleaned = 0.13399 Jy
! Component: 150  -  total flux cleaned = 0.1443 Jy
! Component: 200  -  total flux cleaned = 0.150375 Jy
! Total flux subtracted in 200 components = 0.150375 Jy
! Clean residual min=-0.003860 max=0.004385 Jy/beam
! Clean residual mean=0.000002 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.150375 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.150375 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7865 mas, bmaj=2.203 mas, bpa=-4.31 degrees
! Estimated noise=0.340102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00710165 Jy
! Component: 100  -  total flux cleaned = 0.0105454 Jy
! Component: 150  -  total flux cleaned = 0.0125008 Jy
! Component: 200  -  total flux cleaned = 0.0134786 Jy
! Total flux subtracted in 200 components = 0.0134786 Jy
! Clean residual min=-0.002003 max=0.001939 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.163853 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 45 components and 0.163853 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.186 mas, bmaj=6.675 mas, bpa=2.318 degrees
! Estimated noise=0.43401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173779 Jy
! Component: 100  -  total flux cleaned = 0.00265852 Jy
! Component: 150  -  total flux cleaned = 0.00301974 Jy
! Component: 200  -  total flux cleaned = 0.00310997 Jy
! Total flux subtracted in 200 components = 0.00310997 Jy
! Clean residual min=-0.002441 max=0.002167 Jy/beam
! Clean residual mean=-0.000002 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.166963 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.56101e-05 Jy
! Component: 100  -  total flux cleaned = 1.54577e-05 Jy
! Component: 150  -  total flux cleaned = 1.55908e-05 Jy
! Component: 200  -  total flux cleaned = 1.57629e-05 Jy
! Total flux subtracted in 200 components = 1.57629e-05 Jy
! Clean residual min=-0.002442 max=0.002144 Jy/beam
! Clean residual mean=-0.000002 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.166979 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.166979 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7865 mas, bmaj=2.203 mas, bpa=-4.31 degrees
! Estimated noise=0.340102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206438 Jy
! Component: 100  -  total flux cleaned = -0.000346263 Jy
! Component: 150  -  total flux cleaned = -0.000499912 Jy
! Component: 200  -  total flux cleaned = -0.000665028 Jy
! Total flux subtracted in 200 components = -0.000665028 Jy
! Clean residual min=-0.002071 max=0.001849 Jy/beam
! Clean residual mean=-0.000001 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.166314 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 91 components and 0.166314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090730Jy  sigma=1.442246
! Fit after  self-cal, rms=0.090720Jy  sigma=1.442144
wmodel /J1305-3132_X_map.mod
! wmodel: Unable to open new model file: /J1305-3132_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1305-3132_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7865 x 2.203 at -4.31 degrees (North through East)
! Clean map  min=-0.0018055  max=0.13615 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1305-3132_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.136152 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000451869 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.995655 0.995655 1.99131 3.98262 7.96524 15.9305 31.861 63.7219
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.136 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  301.309 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1305-3132_X_dfm.log closed on Thu May 19 21:46:41 2016