! Started logfile: /scr/pima/bg219g_uvs/J1203+4803_S_uvs.log on Thu Apr  7 07:15:38 2016
obs /scr/pima/bg219g_uvs/J1203+4803_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1203+4803_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.958333 visibilities/baseline/integration-bin.
! Found source: J1203+4803
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1932 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1203+4803_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.060519Jy  sigma=22.601741
! Fit after  self-cal, rms=0.689224Jy  sigma=14.770098
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.504 mas, bmaj=10.1 mas, bpa=-49.95 degrees
! Estimated noise=1.18405 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.239482 Jy
! Component: 100  -  total flux cleaned = 0.292167 Jy
! Total flux subtracted in 100 components = 0.292167 Jy
! Clean residual min=-0.010918 max=0.016664 Jy/beam
! Clean residual mean=0.000028 rms=0.003522 Jy/beam
! Combined flux in latest and established models = 0.292167 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.292167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077563Jy  sigma=1.510141
! Fit after  self-cal, rms=0.077546Jy  sigma=1.509771
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.135 mas, bmaj=10.29 mas, bpa=-50.67 degrees
! Estimated noise=0.858663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021659 Jy
! Component: 100  -  total flux cleaned = 0.0217609 Jy
! Component: 150  -  total flux cleaned = 0.0220866 Jy
! Component: 200  -  total flux cleaned = 0.023214 Jy
! Total flux subtracted in 200 components = 0.023214 Jy
! Clean residual min=-0.008844 max=0.007768 Jy/beam
! Clean residual mean=0.000024 rms=0.002219 Jy/beam
! Combined flux in latest and established models = 0.315381 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 35 components and 0.315381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069935Jy  sigma=1.352502
! Fit after  self-cal, rms=0.069891Jy  sigma=1.352157
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.135 x 10.29 at -50.67 degrees (North through East)
! Clean map  min=-0.011678  max=0.31516 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.05     KP        1.00     LA        0.91     
!   MK        1.01     NL        0.94     OV        1.01     PT        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.09     KP        0.96     LA        0.96     
!   MK        1.00     NL        0.85     OV        1.02     PT        1.03     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.08     KP        0.98     LA        0.95     
!   MK        1.02     NL        1.12     OV        0.99     PT        1.05     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.069891Jy  sigma=1.352157
! Fit after  self-cal, rms=0.065946Jy  sigma=1.273519
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.154 mas, bmaj=10.35 mas, bpa=-50.56 degrees
! Estimated noise=0.859328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000884031 Jy
! Component: 100  -  total flux cleaned = 0.000773676 Jy
! Component: 150  -  total flux cleaned = 0.000589822 Jy
! Component: 200  -  total flux cleaned = 0.000364874 Jy
! Total flux subtracted in 200 components = 0.000364874 Jy
! Clean residual min=-0.005751 max=0.003987 Jy/beam
! Clean residual mean=0.000017 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.315746 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 60 components and 0.315746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065645Jy  sigma=1.267014
! Fit after  self-cal, rms=0.065642Jy  sigma=1.266835
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065642Jy  sigma=1.266835
! Fit after  self-cal, rms=0.063191Jy  sigma=1.220585
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=10.38 mas, bpa=-50.56 degrees
! Estimated noise=0.856839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.45113e-05 Jy
! Component: 100  -  total flux cleaned = 0.000355506 Jy
! Component: 150  -  total flux cleaned = 0.000614504 Jy
! Component: 200  -  total flux cleaned = 0.000750921 Jy
! Total flux subtracted in 200 components = 0.000750921 Jy
! Clean residual min=-0.003588 max=0.003229 Jy/beam
! Clean residual mean=0.000018 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.316497 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 0.316497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063123Jy  sigma=1.219332
! Fit after  self-cal, rms=0.063158Jy  sigma=1.219102
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.4003e-06 Jy
! Component: 100  -  total flux cleaned = 9.80071e-05 Jy
! Component: 150  -  total flux cleaned = 0.000161292 Jy
! Component: 200  -  total flux cleaned = 0.000218119 Jy
! Total flux subtracted in 200 components = 0.000218119 Jy
! Clean residual min=-0.003558 max=0.003201 Jy/beam
! Clean residual mean=0.000018 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 0.316715 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.316715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063144Jy  sigma=1.218733
! Fit after  self-cal, rms=0.063146Jy  sigma=1.218697
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063146Jy  sigma=1.218697
! Fit after  self-cal, rms=0.063171Jy  sigma=1.218379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=10.38 mas, bpa=-50.58 degrees
! Estimated noise=0.857396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299776 Jy
! Component: 100  -  total flux cleaned = 0.000408279 Jy
! Component: 150  -  total flux cleaned = 0.000491718 Jy
! Component: 200  -  total flux cleaned = 0.000509232 Jy
! Total flux subtracted in 200 components = 0.000509232 Jy
! Clean residual min=-0.003476 max=0.003116 Jy/beam
! Clean residual mean=0.000016 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.317224 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 0.317224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063146Jy  sigma=1.217947
! Fit after  self-cal, rms=0.063148Jy  sigma=1.217927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.71938e-05 Jy
! Component: 100  -  total flux cleaned = -8.26907e-05 Jy
! Component: 150  -  total flux cleaned = -8.26294e-05 Jy
! Component: 200  -  total flux cleaned = -8.2007e-05 Jy
! Total flux subtracted in 200 components = -8.2007e-05 Jy
! Clean residual min=-0.003464 max=0.003166 Jy/beam
! Clean residual mean=0.000016 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.317142 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.317142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063141Jy  sigma=1.217790
! Fit after  self-cal, rms=0.063143Jy  sigma=1.217782
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063143Jy  sigma=1.217782
! Fit after  self-cal, rms=0.063181Jy  sigma=1.217601
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.051 mas, bmaj=10.79 mas, bpa=-58.59 degrees
! Estimated noise=1.03663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228711 Jy
! Component: 100  -  total flux cleaned = 0.000246575 Jy
! Component: 150  -  total flux cleaned = 0.000263016 Jy
! Component: 200  -  total flux cleaned = 0.000277593 Jy
! Total flux subtracted in 200 components = 0.000277593 Jy
! Clean residual min=-0.004178 max=0.003381 Jy/beam
! Clean residual mean=0.000034 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.31742 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 117 components and 0.31742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063178Jy  sigma=1.217484
! Fit after  self-cal, rms=0.063179Jy  sigma=1.217469
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.72607e-05 Jy
! Component: 100  -  total flux cleaned = 3.6782e-05 Jy
! Component: 150  -  total flux cleaned = 4.6029e-05 Jy
! Component: 200  -  total flux cleaned = 5.40915e-05 Jy
! Total flux subtracted in 200 components = 5.40915e-05 Jy
! Clean residual min=-0.004135 max=0.003325 Jy/beam
! Clean residual mean=0.000034 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.317474 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.317474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063179Jy  sigma=1.217445
! Fit after  self-cal, rms=0.063179Jy  sigma=1.217438
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=10.39 mas, bpa=-50.6 degrees
! Estimated noise=0.857722 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.158 x 10.39 at -50.6 degrees (North through East)
! Clean map  min=-0.0072648  max=0.3143 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.522 mas, bmaj=10.18 mas, bpa=-49.83 degrees
! Estimated noise=1.2003 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.24271 Jy
! Component: 100  -  total flux cleaned = 0.295895 Jy
! Component: 150  -  total flux cleaned = 0.31153 Jy
! Component: 200  -  total flux cleaned = 0.316806 Jy
! Total flux subtracted in 200 components = 0.316806 Jy
! Clean residual min=-0.006944 max=0.007344 Jy/beam
! Clean residual mean=0.000009 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 0.316806 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.316806 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=10.39 mas, bpa=-50.6 degrees
! Estimated noise=0.857722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359426 Jy
! Component: 100  -  total flux cleaned = 0.0034201 Jy
! Component: 150  -  total flux cleaned = 0.00316279 Jy
! Component: 200  -  total flux cleaned = 0.00315747 Jy
! Total flux subtracted in 200 components = 0.00315747 Jy
! Clean residual min=-0.004111 max=0.003393 Jy/beam
! Clean residual mean=0.000012 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.319964 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 34 components and 0.319964 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.051 mas, bmaj=10.79 mas, bpa=-58.59 degrees
! Estimated noise=1.03663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.68017e-06 Jy
! Component: 100  -  total flux cleaned = -0.000291269 Jy
! Component: 150  -  total flux cleaned = -0.000465548 Jy
! Component: 200  -  total flux cleaned = -0.000654882 Jy
! Total flux subtracted in 200 components = -0.000654882 Jy
! Clean residual min=-0.004558 max=0.003509 Jy/beam
! Clean residual mean=0.000030 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 0.319309 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162154 Jy
! Component: 100  -  total flux cleaned = -0.000300452 Jy
! Component: 150  -  total flux cleaned = -0.000419634 Jy
! Component: 200  -  total flux cleaned = -0.000524 Jy
! Total flux subtracted in 200 components = -0.000524 Jy
! Clean residual min=-0.004397 max=0.003463 Jy/beam
! Clean residual mean=0.000031 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.318785 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 58 components and 0.318785 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=10.39 mas, bpa=-50.6 degrees
! Estimated noise=0.857722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181737 Jy
! Component: 100  -  total flux cleaned = 0.000131006 Jy
! Component: 150  -  total flux cleaned = 0.000129286 Jy
! Component: 200  -  total flux cleaned = 2.31841e-05 Jy
! Total flux subtracted in 200 components = 2.31841e-05 Jy
! Clean residual min=-0.003518 max=0.003335 Jy/beam
! Clean residual mean=0.000014 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.318808 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 0.318808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063220Jy  sigma=1.218292
! Fit after  self-cal, rms=0.063216Jy  sigma=1.218149
wmodel /scr/pima/bg219g_uvs/J1203+4803_S_map.mod
! Writing 71 model components to file: /scr/pima/bg219g_uvs/J1203+4803_S_map.mod
wobs /scr/pima/bg219g_uvs/J1203+4803_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219g_uvs/J1203+4803_S_uvs.fits
wwins /scr/pima/bg219g_uvs/J1203+4803_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219g_uvs/J1203+4803_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.14834e-05 Jy
! Component: 100  -  total flux cleaned = -0.000127678 Jy
! Component: 150  -  total flux cleaned = -2.1623e-05 Jy
! Component: 200  -  total flux cleaned = 0.000224653 Jy
! Component: 250  -  total flux cleaned = 0.000318286 Jy
! Component: 300  -  total flux cleaned = 0.00040851 Jy
! Component: 350  -  total flux cleaned = 0.000494033 Jy
! Component: 400  -  total flux cleaned = 0.00049284 Jy
! Component: 450  -  total flux cleaned = 0.000651331 Jy
! Component: 500  -  total flux cleaned = 0.000728156 Jy
! Component: 550  -  total flux cleaned = 0.000839251 Jy
! Component: 600  -  total flux cleaned = 0.000947469 Jy
! Component: 650  -  total flux cleaned = 0.000983035 Jy
! Component: 700  -  total flux cleaned = 0.00112155 Jy
! Component: 750  -  total flux cleaned = 0.00122232 Jy
! Component: 800  -  total flux cleaned = 0.00132101 Jy
! Component: 850  -  total flux cleaned = 0.00135303 Jy
! Component: 900  -  total flux cleaned = 0.00144626 Jy
! Component: 950  -  total flux cleaned = 0.00150713 Jy
! Component: 1000  -  total flux cleaned = 0.00156743 Jy
! Component: 1050  -  total flux cleaned = 0.00168537 Jy
! Component: 1100  -  total flux cleaned = 0.0018008 Jy
! Component: 1150  -  total flux cleaned = 0.00191395 Jy
! Component: 1200  -  total flux cleaned = 0.00207976 Jy
! Component: 1250  -  total flux cleaned = 0.00210662 Jy
! Component: 1300  -  total flux cleaned = 0.00218732 Jy
! Component: 1350  -  total flux cleaned = 0.0022923 Jy
! Component: 1400  -  total flux cleaned = 0.00236926 Jy
! Component: 1450  -  total flux cleaned = 0.00244496 Jy
! Component: 1500  -  total flux cleaned = 0.0025434 Jy
! Component: 1550  -  total flux cleaned = 0.00259183 Jy
! Component: 1600  -  total flux cleaned = 0.00263953 Jy
! Component: 1650  -  total flux cleaned = 0.0027803 Jy
! Component: 1700  -  total flux cleaned = 0.00289529 Jy
! Component: 1750  -  total flux cleaned = 0.00291782 Jy
! Component: 1800  -  total flux cleaned = 0.00302998 Jy
! Component: 1850  -  total flux cleaned = 0.00314033 Jy
! Component: 1900  -  total flux cleaned = 0.00322711 Jy
! Component: 1950  -  total flux cleaned = 0.00331259 Jy
! Component: 2000  -  total flux cleaned = 0.0033973 Jy
! Component: 2050  -  total flux cleaned = 0.00356427 Jy
! Component: 2100  -  total flux cleaned = 0.00364654 Jy
! Component: 2150  -  total flux cleaned = 0.00370787 Jy
! Component: 2200  -  total flux cleaned = 0.00376875 Jy
! Component: 2250  -  total flux cleaned = 0.00390902 Jy
! Component: 2300  -  total flux cleaned = 0.00404728 Jy
! Component: 2350  -  total flux cleaned = 0.00416444 Jy
! Component: 2400  -  total flux cleaned = 0.0042228 Jy
! Component: 2450  -  total flux cleaned = 0.00437654 Jy
! Component: 2500  -  total flux cleaned = 0.00450958 Jy
! Component: 2550  -  total flux cleaned = 0.00460381 Jy
! Component: 2600  -  total flux cleaned = 0.00473476 Jy
! Component: 2650  -  total flux cleaned = 0.00482739 Jy
! Component: 2700  -  total flux cleaned = 0.00491966 Jy
! Component: 2750  -  total flux cleaned = 0.00506621 Jy
! Component: 2800  -  total flux cleaned = 0.00521179 Jy
! Component: 2850  -  total flux cleaned = 0.00537416 Jy
! Component: 2900  -  total flux cleaned = 0.00549967 Jy
! Component: 2950  -  total flux cleaned = 0.00558887 Jy
! Component: 3000  -  total flux cleaned = 0.00574877 Jy
! Component: 3050  -  total flux cleaned = 0.00592538 Jy
! Component: 3100  -  total flux cleaned = 0.00608357 Jy
! Component: 3150  -  total flux cleaned = 0.00617113 Jy
! Component: 3200  -  total flux cleaned = 0.00631065 Jy
! Component: 3250  -  total flux cleaned = 0.00644945 Jy
! Component: 3300  -  total flux cleaned = 0.0065359 Jy
! Component: 3350  -  total flux cleaned = 0.0066566 Jy
! Component: 3400  -  total flux cleaned = 0.00674247 Jy
! Component: 3450  -  total flux cleaned = 0.00687926 Jy
! Component: 3500  -  total flux cleaned = 0.00699846 Jy
! Component: 3550  -  total flux cleaned = 0.00710019 Jy
! Component: 3600  -  total flux cleaned = 0.00718491 Jy
! Component: 3650  -  total flux cleaned = 0.00723554 Jy
! Component: 3700  -  total flux cleaned = 0.00738693 Jy
! Component: 3750  -  total flux cleaned = 0.00740369 Jy
! Component: 3800  -  total flux cleaned = 0.00752089 Jy
! Component: 3850  -  total flux cleaned = 0.00748746 Jy
! Component: 3900  -  total flux cleaned = 0.00758756 Jy
! Component: 3950  -  total flux cleaned = 0.00760413 Jy
! Component: 4000  -  total flux cleaned = 0.00765394 Jy
! Component: 4050  -  total flux cleaned = 0.00768717 Jy
! Total flux subtracted in 4096 components = 0.00772037 Jy
! Clean residual min=-0.001098 max=0.000990 Jy/beam
! Clean residual mean=0.000006 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.326528 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 365 components and 0.326528 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219g_uvs/J1203+4803_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.158 x 10.39 at -50.6 degrees (North through East)
! Clean map  min=-0.0070583  max=0.31442 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1203+4803_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.314417 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000301135 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.287328 0.287328 0.574655 1.14931 2.29862 4.59724 9.19449 18.389 36.7779 73.5559
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.314 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1044.1 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1203+4803_S_uvs.log closed on Thu Apr  7 07:15:43 2016