! Started logfile: /scr/pima/bg219g_uvs/J1203+4803_S_dfm.log on Thu May 19 21:46:06 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1203+4803_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1203+4803_S_uva.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.958333 visibilities/baseline/integration-bin. ! Found source: J1203+4803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 1932 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1203+4803_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.060519Jy sigma=22.601741 ! Fit after self-cal, rms=0.689224Jy sigma=14.770098 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=10.1 mas, bpa=-49.95 degrees ! Estimated noise=1.18405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239482 Jy ! Component: 100 - total flux cleaned = 0.292167 Jy ! Total flux subtracted in 100 components = 0.292167 Jy ! Clean residual min=-0.010918 max=0.016664 Jy/beam ! Clean residual mean=0.000028 rms=0.003522 Jy/beam ! Combined flux in latest and established models = 0.292167 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.292167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077563Jy sigma=1.510141 ! Fit after self-cal, rms=0.077546Jy sigma=1.509771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=10.29 mas, bpa=-50.67 degrees ! Estimated noise=0.858663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021659 Jy ! Component: 100 - total flux cleaned = 0.0217609 Jy ! Component: 150 - total flux cleaned = 0.0220866 Jy ! Component: 200 - total flux cleaned = 0.023214 Jy ! Total flux subtracted in 200 components = 0.023214 Jy ! Clean residual min=-0.008844 max=0.007768 Jy/beam ! Clean residual mean=0.000024 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 0.315381 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.315381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069935Jy sigma=1.352502 ! Fit after self-cal, rms=0.069891Jy sigma=1.352157 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 10.29 at -50.67 degrees (North through East) ! Clean map min=-0.011678 max=0.31516 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.05 KP 1.00 LA 0.91 ! MK 1.01 NL 0.94 OV 1.01 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 1.09 KP 0.96 LA 0.96 ! MK 1.00 NL 0.85 OV 1.02 PT 1.03 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.08 KP 0.98 LA 0.95 ! MK 1.02 NL 1.12 OV 0.99 PT 1.05 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.069891Jy sigma=1.352157 ! Fit after self-cal, rms=0.065946Jy sigma=1.273519 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=10.35 mas, bpa=-50.56 degrees ! Estimated noise=0.859328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000884031 Jy ! Component: 100 - total flux cleaned = 0.000773676 Jy ! Component: 150 - total flux cleaned = 0.000589822 Jy ! Component: 200 - total flux cleaned = 0.000364874 Jy ! Total flux subtracted in 200 components = 0.000364874 Jy ! Clean residual min=-0.005751 max=0.003987 Jy/beam ! Clean residual mean=0.000017 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.315746 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.315746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065645Jy sigma=1.267014 ! Fit after self-cal, rms=0.065642Jy sigma=1.266835 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065642Jy sigma=1.266835 ! Fit after self-cal, rms=0.063191Jy sigma=1.220585 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=10.38 mas, bpa=-50.56 degrees ! Estimated noise=0.856839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.45113e-05 Jy ! Component: 100 - total flux cleaned = 0.000355506 Jy ! Component: 150 - total flux cleaned = 0.000614504 Jy ! Component: 200 - total flux cleaned = 0.000750921 Jy ! Total flux subtracted in 200 components = 0.000750921 Jy ! Clean residual min=-0.003588 max=0.003229 Jy/beam ! Clean residual mean=0.000018 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.316497 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.316497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063123Jy sigma=1.219332 ! Fit after self-cal, rms=0.063158Jy sigma=1.219102 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4003e-06 Jy ! Component: 100 - total flux cleaned = 9.80071e-05 Jy ! Component: 150 - total flux cleaned = 0.000161292 Jy ! Component: 200 - total flux cleaned = 0.000218119 Jy ! Total flux subtracted in 200 components = 0.000218119 Jy ! Clean residual min=-0.003558 max=0.003201 Jy/beam ! Clean residual mean=0.000018 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.316715 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.316715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063144Jy sigma=1.218733 ! Fit after self-cal, rms=0.063146Jy sigma=1.218697 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063146Jy sigma=1.218697 ! Fit after self-cal, rms=0.063171Jy sigma=1.218379 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=10.38 mas, bpa=-50.58 degrees ! Estimated noise=0.857396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299776 Jy ! Component: 100 - total flux cleaned = 0.000408279 Jy ! Component: 150 - total flux cleaned = 0.000491718 Jy ! Component: 200 - total flux cleaned = 0.000509232 Jy ! Total flux subtracted in 200 components = 0.000509232 Jy ! Clean residual min=-0.003476 max=0.003116 Jy/beam ! Clean residual mean=0.000016 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.317224 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.317224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063146Jy sigma=1.217947 ! Fit after self-cal, rms=0.063148Jy sigma=1.217927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.71938e-05 Jy ! Component: 100 - total flux cleaned = -8.26907e-05 Jy ! Component: 150 - total flux cleaned = -8.26294e-05 Jy ! Component: 200 - total flux cleaned = -8.2007e-05 Jy ! Total flux subtracted in 200 components = -8.2007e-05 Jy ! Clean residual min=-0.003464 max=0.003166 Jy/beam ! Clean residual mean=0.000016 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.317142 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.317142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063141Jy sigma=1.217790 ! Fit after self-cal, rms=0.063143Jy sigma=1.217782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063143Jy sigma=1.217782 ! Fit after self-cal, rms=0.063181Jy sigma=1.217601 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.051 mas, bmaj=10.79 mas, bpa=-58.59 degrees ! Estimated noise=1.03663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228711 Jy ! Component: 100 - total flux cleaned = 0.000246575 Jy ! Component: 150 - total flux cleaned = 0.000263016 Jy ! Component: 200 - total flux cleaned = 0.000277593 Jy ! Total flux subtracted in 200 components = 0.000277593 Jy ! Clean residual min=-0.004178 max=0.003381 Jy/beam ! Clean residual mean=0.000034 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.31742 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.31742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063178Jy sigma=1.217484 ! Fit after self-cal, rms=0.063179Jy sigma=1.217469 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.72607e-05 Jy ! Component: 100 - total flux cleaned = 3.6782e-05 Jy ! Component: 150 - total flux cleaned = 4.6029e-05 Jy ! Component: 200 - total flux cleaned = 5.40915e-05 Jy ! Total flux subtracted in 200 components = 5.40915e-05 Jy ! Clean residual min=-0.004135 max=0.003325 Jy/beam ! Clean residual mean=0.000034 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.317474 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 0.317474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063179Jy sigma=1.217445 ! Fit after self-cal, rms=0.063179Jy sigma=1.217438 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=10.39 mas, bpa=-50.6 degrees ! Estimated noise=0.857722 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.158 x 10.39 at -50.6 degrees (North through East) ! Clean map min=-0.0072648 max=0.3143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=10.18 mas, bpa=-49.83 degrees ! Estimated noise=1.2003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24271 Jy ! Component: 100 - total flux cleaned = 0.295895 Jy ! Component: 150 - total flux cleaned = 0.31153 Jy ! Component: 200 - total flux cleaned = 0.316806 Jy ! Total flux subtracted in 200 components = 0.316806 Jy ! Clean residual min=-0.006944 max=0.007344 Jy/beam ! Clean residual mean=0.000009 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.316806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.316806 Jy ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=10.39 mas, bpa=-50.6 degrees ! Estimated noise=0.857722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359426 Jy ! Component: 100 - total flux cleaned = 0.0034201 Jy ! Component: 150 - total flux cleaned = 0.00316279 Jy ! Component: 200 - total flux cleaned = 0.00315747 Jy ! Total flux subtracted in 200 components = 0.00315747 Jy ! Clean residual min=-0.004111 max=0.003393 Jy/beam ! Clean residual mean=0.000012 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.319964 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.319964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.051 mas, bmaj=10.79 mas, bpa=-58.59 degrees ! Estimated noise=1.03663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.68017e-06 Jy ! Component: 100 - total flux cleaned = -0.000291269 Jy ! Component: 150 - total flux cleaned = -0.000465548 Jy ! Component: 200 - total flux cleaned = -0.000654882 Jy ! Total flux subtracted in 200 components = -0.000654882 Jy ! Clean residual min=-0.004558 max=0.003509 Jy/beam ! Clean residual mean=0.000030 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.319309 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162154 Jy ! Component: 100 - total flux cleaned = -0.000300452 Jy ! Component: 150 - total flux cleaned = -0.000419634 Jy ! Component: 200 - total flux cleaned = -0.000524 Jy ! Total flux subtracted in 200 components = -0.000524 Jy ! Clean residual min=-0.004397 max=0.003463 Jy/beam ! Clean residual mean=0.000031 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.318785 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 0.318785 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=10.39 mas, bpa=-50.6 degrees ! Estimated noise=0.857722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181737 Jy ! Component: 100 - total flux cleaned = 0.000131006 Jy ! Component: 150 - total flux cleaned = 0.000129286 Jy ! Component: 200 - total flux cleaned = 2.31841e-05 Jy ! Total flux subtracted in 200 components = 2.31841e-05 Jy ! Clean residual min=-0.003518 max=0.003335 Jy/beam ! Clean residual mean=0.000014 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.318808 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.318808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063220Jy sigma=1.218292 ! Fit after self-cal, rms=0.063216Jy sigma=1.218149 wmodel /J1203+4803_S_map.mod ! wmodel: Unable to open new model file: /J1203+4803_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1203+4803_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.158 x 10.39 at -50.6 degrees (North through East) ! Clean map min=-0.0069003 max=0.31414 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1203+4803_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.314137 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000890059 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.850004 0.850004 1.70001 3.40001 6.80003 13.6001 27.2001 54.4002 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.314 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 352.939 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1203+4803_S_dfm.log closed on Thu May 19 21:46:08 2016