! Started logfile: /scr/pima/bg219g_uvs/J1142+1547_X_dfm.log on Thu May 19 21:45:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1142+1547_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1142+1547_X_uva.fits
! AN table 1: 26 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.974359 visibilities/baseline/integration-bin.
! Found source: J1142+1547
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1142+1547_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002947Jy  sigma=22.406505
! Fit after  self-cal, rms=0.897613Jy  sigma=20.044608
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6459 mas, bmaj=1.919 mas, bpa=-12.53 degrees
! Estimated noise=0.473741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0826518 Jy
! Component: 100  -  total flux cleaned = 0.101116 Jy
! Total flux subtracted in 100 components = 0.101116 Jy
! Clean residual min=-0.004067 max=0.006302 Jy/beam
! Clean residual mean=-0.000005 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.101116 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.101116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075680Jy  sigma=1.481058
! Fit after  self-cal, rms=0.075668Jy  sigma=1.480825
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624611 Jy
! Component: 100  -  total flux cleaned = 0.00802039 Jy
! Total flux subtracted in 100 components = 0.00802039 Jy
! Clean residual min=-0.003809 max=0.003309 Jy/beam
! Clean residual mean=-0.000004 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.109137 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.109137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075246Jy  sigma=1.470615
! Fit after  self-cal, rms=0.075251Jy  sigma=1.470421
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.829 mas, bmaj=2.059 mas, bpa=-11.08 degrees
! Estimated noise=0.289408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000875795 Jy
! Component: 100  -  total flux cleaned = 0.000914148 Jy
! Component: 150  -  total flux cleaned = 0.00098433 Jy
! Component: 200  -  total flux cleaned = 0.00106943 Jy
! Total flux subtracted in 200 components = 0.00106943 Jy
! Clean residual min=-0.003049 max=0.003323 Jy/beam
! Clean residual mean=-0.000008 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.110206 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.110206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075197Jy  sigma=1.468919
! Fit after  self-cal, rms=0.075203Jy  sigma=1.468867
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.829 x 2.059 at -11.08 degrees (North through East)
! Clean map  min=-0.0028922  max=0.10489 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        0.94     KP        1.03     
!   LA        1.02     MK        0.97     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.12     HN        0.96     KP        1.07     
!   LA        0.89     MK        0.93     NL        1.05     OV        1.01     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.15     HN        0.97     KP        1.03     
!   LA        1.00     MK        0.95     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.88     KP        1.04     
!   LA        0.92     MK        1.02     NL        1.02     OV        1.05     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.98     KP        1.02     
!   LA        0.93     MK        1.00     NL        1.05     OV        1.03     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.02     KP        1.03     
!   LA        0.98     MK        0.94     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.85     KP        1.07     
!   LA        0.92     MK        1.01     NL        1.01     OV        0.96     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.96     KP        1.07     
!   LA        0.93     MK        1.00     NL        1.01     OV        0.93     
!   PT        1.02     SC        0.90     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        0.98     KP        1.04     
!   LA        0.87     MK        1.08     NL        1.03     OV        0.95     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.94     KP        1.03     
!   LA        0.88     MK        0.98     NL        1.00     OV        1.01     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.95     KP        1.05     
!   LA        0.88     MK        0.99     NL        1.00     OV        1.04     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.10     HN        0.93     KP        1.10     
!   LA        0.96     MK        1.04     NL        0.98     OV        0.99     
!   PT        1.04     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.075203Jy  sigma=1.468867
! Fit after  self-cal, rms=0.072540Jy  sigma=1.459368
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8234 mas, bmaj=2.06 mas, bpa=-11.19 degrees
! Estimated noise=0.288693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209139 Jy
! Component: 100  -  total flux cleaned = 0.000213279 Jy
! Component: 150  -  total flux cleaned = 0.000201969 Jy
! Component: 200  -  total flux cleaned = 0.000181459 Jy
! Total flux subtracted in 200 components = 0.000181459 Jy
! Clean residual min=-0.001971 max=0.002329 Jy/beam
! Clean residual mean=-0.000003 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.110388 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 19 components and 0.110388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072529Jy  sigma=1.459254
! Fit after  self-cal, rms=0.072525Jy  sigma=1.458981
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072525Jy  sigma=1.458981
! Fit after  self-cal, rms=0.072530Jy  sigma=1.458949
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8224 mas, bmaj=2.061 mas, bpa=-11.27 degrees
! Estimated noise=0.288804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.72624e-05 Jy
! Component: 100  -  total flux cleaned = 1.58152e-05 Jy
! Component: 150  -  total flux cleaned = 7.45865e-06 Jy
! Component: 200  -  total flux cleaned = -7.22911e-06 Jy
! Total flux subtracted in 200 components = -7.22911e-06 Jy
! Clean residual min=-0.001946 max=0.002343 Jy/beam
! Clean residual mean=-0.000003 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.11038 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.11038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072525Jy  sigma=1.458909
! Fit after  self-cal, rms=0.072525Jy  sigma=1.458896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29.6, 19.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208143 Jy
! Component: 100  -  total flux cleaned = 0.0031989 Jy
! Component: 150  -  total flux cleaned = 0.00386626 Jy
! Component: 200  -  total flux cleaned = 0.00404952 Jy
! Total flux subtracted in 200 components = 0.00404952 Jy
! Clean residual min=-0.001762 max=0.001984 Jy/beam
! Clean residual mean=-0.000001 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.11443 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 45 components and 0.11443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072460Jy  sigma=1.457498
! Fit after  self-cal, rms=0.072448Jy  sigma=1.457390
! Inverting map 
! Added new window around map position (3, -10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190103 Jy
! Component: 100  -  total flux cleaned = 0.00299883 Jy
! Component: 150  -  total flux cleaned = 0.0038134 Jy
! Component: 200  -  total flux cleaned = 0.00431605 Jy
! Total flux subtracted in 200 components = 0.00431605 Jy
! Clean residual min=-0.001542 max=0.001652 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.118746 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 75 components and 0.118746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072385Jy  sigma=1.456186
! Fit after  self-cal, rms=0.072376Jy  sigma=1.456113
! Inverting map 
! Added new window around map position (-21, -35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144745 Jy
! Component: 100  -  total flux cleaned = 0.00213924 Jy
! Component: 150  -  total flux cleaned = 0.00263244 Jy
! Component: 200  -  total flux cleaned = 0.00299778 Jy
! Total flux subtracted in 200 components = 0.00299778 Jy
! Clean residual min=-0.001531 max=0.001353 Jy/beam
! Clean residual mean=-0.000000 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.121744 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 98 components and 0.121744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072336Jy  sigma=1.455316
! Fit after  self-cal, rms=0.072336Jy  sigma=1.455282
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072336Jy  sigma=1.455282
! Fit after  self-cal, rms=0.071936Jy  sigma=1.455148
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8233 mas, bmaj=2.064 mas, bpa=-11.29 degrees
! Estimated noise=0.287849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652568 Jy
! Component: 100  -  total flux cleaned = 0.000884088 Jy
! Component: 150  -  total flux cleaned = 0.00105334 Jy
! Component: 200  -  total flux cleaned = 0.00122991 Jy
! Total flux subtracted in 200 components = 0.00122991 Jy
! Clean residual min=-0.001416 max=0.001305 Jy/beam
! Clean residual mean=0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.122974 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 105 components and 0.122974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071922Jy  sigma=1.454883
! Fit after  self-cal, rms=0.071922Jy  sigma=1.454873
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015399 Jy
! Component: 100  -  total flux cleaned = 0.000296645 Jy
! Component: 150  -  total flux cleaned = 0.000430815 Jy
! Component: 200  -  total flux cleaned = 0.000557324 Jy
! Total flux subtracted in 200 components = 0.000557324 Jy
! Clean residual min=-0.001376 max=0.001296 Jy/beam
! Clean residual mean=0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.123531 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 113 components and 0.123531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071914Jy  sigma=1.454727
! Fit after  self-cal, rms=0.071914Jy  sigma=1.454722
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071914Jy  sigma=1.454722
! Fit after  self-cal, rms=0.071805Jy  sigma=1.454713
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.869 mas, bpa=-3.761 degrees
! Estimated noise=0.373837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000526169 Jy
! Component: 100  -  total flux cleaned = 0.000679702 Jy
! Component: 150  -  total flux cleaned = 0.000777106 Jy
! Component: 200  -  total flux cleaned = 0.000848489 Jy
! Total flux subtracted in 200 components = 0.000848489 Jy
! Clean residual min=-0.001572 max=0.001468 Jy/beam
! Clean residual mean=0.000003 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.124379 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 132 components and 0.124379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071801Jy  sigma=1.454674
! Fit after  self-cal, rms=0.071801Jy  sigma=1.454664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119821 Jy
! Component: 100  -  total flux cleaned = 0.000197925 Jy
! Component: 150  -  total flux cleaned = 0.000258589 Jy
! Component: 200  -  total flux cleaned = 0.000338965 Jy
! Total flux subtracted in 200 components = 0.000338965 Jy
! Clean residual min=-0.001538 max=0.001461 Jy/beam
! Clean residual mean=0.000003 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.124718 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 142 components and 0.124718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071799Jy  sigma=1.454658
! Fit after  self-cal, rms=0.071799Jy  sigma=1.454655
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8238 mas, bmaj=2.065 mas, bpa=-11.29 degrees
! Estimated noise=0.287552 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8238 x 2.065 at -11.29 degrees (North through East)
! Clean map  min=-0.0011901  max=0.10504 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6422 mas, bmaj=1.921 mas, bpa=-12.7 degrees
! Estimated noise=0.470013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0819577 Jy
! Component: 100  -  total flux cleaned = 0.100367 Jy
! Component: 150  -  total flux cleaned = 0.106485 Jy
! Component: 200  -  total flux cleaned = 0.109664 Jy
! Total flux subtracted in 200 components = 0.109664 Jy
! Clean residual min=-0.002858 max=0.002577 Jy/beam
! Clean residual mean=-0.000001 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.109664 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.109664 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8238 mas, bmaj=2.065 mas, bpa=-11.29 degrees
! Estimated noise=0.287552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270067 Jy
! Component: 100  -  total flux cleaned = 0.00469036 Jy
! Component: 150  -  total flux cleaned = 0.00629888 Jy
! Component: 200  -  total flux cleaned = 0.0076576 Jy
! Total flux subtracted in 200 components = 0.0076576 Jy
! Clean residual min=-0.001670 max=0.001608 Jy/beam
! Clean residual mean=-0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.117322 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 46 components and 0.117322 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.869 mas, bpa=-3.761 degrees
! Estimated noise=0.373837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174829 Jy
! Component: 100  -  total flux cleaned = 0.00305004 Jy
! Component: 150  -  total flux cleaned = 0.00410268 Jy
! Component: 200  -  total flux cleaned = 0.00495715 Jy
! Total flux subtracted in 200 components = 0.00495715 Jy
! Clean residual min=-0.001715 max=0.001624 Jy/beam
! Clean residual mean=0.000002 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.122279 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000697957 Jy
! Component: 100  -  total flux cleaned = 0.00127825 Jy
! Component: 150  -  total flux cleaned = 0.00174567 Jy
! Component: 200  -  total flux cleaned = 0.00198539 Jy
! Total flux subtracted in 200 components = 0.00198539 Jy
! Clean residual min=-0.001553 max=0.001512 Jy/beam
! Clean residual mean=0.000003 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.124264 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 93 components and 0.124264 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8238 mas, bmaj=2.065 mas, bpa=-11.29 degrees
! Estimated noise=0.287552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295568 Jy
! Component: 100  -  total flux cleaned = 0.000374397 Jy
! Component: 150  -  total flux cleaned = 0.000399566 Jy
! Component: 200  -  total flux cleaned = 0.000489009 Jy
! Total flux subtracted in 200 components = 0.000489009 Jy
! Clean residual min=-0.001290 max=0.001386 Jy/beam
! Clean residual mean=0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.124753 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 114 components and 0.124753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071828Jy  sigma=1.455186
! Fit after  self-cal, rms=0.071825Jy  sigma=1.455129
wmodel /J1142+1547_X_map.mod
! wmodel: Unable to open new model file: /J1142+1547_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1142+1547_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8238 x 2.065 at -11.29 degrees (North through East)
! Clean map  min=-0.0011657  max=0.10439 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1142+1547_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.104385 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000324194 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.931721 0.931721 1.86344 3.72688 7.45377 14.9075 29.8151 59.6302
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.104 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  321.984 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1142+1547_X_dfm.log closed on Thu May 19 21:45:05 2016