! Started logfile: /scr/pima/bg219g_uvs/J1140+1203_S_dfm.log on Thu May 19 21:44:51 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1140+1203_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1140+1203_S_uva.fits ! AN table 1: 31 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.648746 visibilities/baseline/integration-bin. ! Found source: J1140+1203 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 2896 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1140+1203_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001424Jy sigma=24.756273 ! Fit after self-cal, rms=0.962085Jy sigma=23.774423 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.819 mas, bpa=-12.47 degrees ! Estimated noise=0.765176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304296 Jy ! Component: 100 - total flux cleaned = 0.0373266 Jy ! Total flux subtracted in 100 components = 0.0373266 Jy ! Clean residual min=-0.004869 max=0.004993 Jy/beam ! Clean residual mean=0.000002 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.0373266 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0373266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053665Jy sigma=1.231378 ! Fit after self-cal, rms=0.051804Jy sigma=1.190330 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047919 Jy ! Component: 100 - total flux cleaned = 0.00661704 Jy ! Component: 150 - total flux cleaned = 0.00746318 Jy ! Component: 200 - total flux cleaned = 0.00771246 Jy ! Total flux subtracted in 200 components = 0.00771246 Jy ! Clean residual min=-0.005092 max=0.003550 Jy/beam ! Clean residual mean=-0.000005 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.045039 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.045039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051379Jy sigma=1.179972 ! Fit after self-cal, rms=0.051322Jy sigma=1.178932 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 9.592 at -11.63 degrees (North through East) ! Clean map min=-0.0049915 max=0.041275 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.051322Jy sigma=1.178932 ! Fit after self-cal, rms=0.051322Jy sigma=1.178932 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665536 Jy ! Component: 100 - total flux cleaned = 0.000739079 Jy ! Component: 150 - total flux cleaned = 0.000807634 Jy ! Component: 200 - total flux cleaned = 0.00084025 Jy ! Total flux subtracted in 200 components = 0.00084025 Jy ! Clean residual min=-0.005002 max=0.003350 Jy/beam ! Clean residual mean=-0.000005 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.0458793 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.0458793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051265Jy sigma=1.178041 ! Fit after self-cal, rms=0.051219Jy sigma=1.177926 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051219Jy sigma=1.177926 ! Fit after self-cal, rms=0.051219Jy sigma=1.177926 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127538 Jy ! Component: 100 - total flux cleaned = 0.000191233 Jy ! Component: 150 - total flux cleaned = 0.000221834 Jy ! Component: 200 - total flux cleaned = 0.000280849 Jy ! Total flux subtracted in 200 components = 0.000280849 Jy ! Clean residual min=-0.004946 max=0.003326 Jy/beam ! Clean residual mean=-0.000005 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.0461601 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.0461601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051183Jy sigma=1.177153 ! Fit after self-cal, rms=0.051149Jy sigma=1.177062 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55964e-05 Jy ! Component: 100 - total flux cleaned = 9.45043e-05 Jy ! Component: 150 - total flux cleaned = 0.00014903 Jy ! Component: 200 - total flux cleaned = 0.000175217 Jy ! Total flux subtracted in 200 components = 0.000175217 Jy ! Clean residual min=-0.004881 max=0.003267 Jy/beam ! Clean residual mean=-0.000006 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.0463353 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.0463353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051122Jy sigma=1.176426 ! Fit after self-cal, rms=0.051108Jy sigma=1.176383 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051108Jy sigma=1.176383 ! Fit after self-cal, rms=0.051108Jy sigma=1.176383 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.59816e-06 Jy ! Component: 100 - total flux cleaned = 8.24826e-05 Jy ! Component: 150 - total flux cleaned = 0.000105972 Jy ! Component: 200 - total flux cleaned = 0.000128551 Jy ! Total flux subtracted in 200 components = 0.000128551 Jy ! Clean residual min=-0.004835 max=0.003231 Jy/beam ! Clean residual mean=-0.000006 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.0464639 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.0464639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051085Jy sigma=1.175883 ! Fit after self-cal, rms=0.051075Jy sigma=1.175848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58157e-06 Jy ! Component: 100 - total flux cleaned = 2.42693e-05 Jy ! Component: 150 - total flux cleaned = 4.6005e-05 Jy ! Component: 200 - total flux cleaned = 6.62541e-05 Jy ! Total flux subtracted in 200 components = 6.62541e-05 Jy ! Clean residual min=-0.004796 max=0.003197 Jy/beam ! Clean residual mean=-0.000006 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.0465301 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0465301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051055Jy sigma=1.175443 ! Fit after self-cal, rms=0.051047Jy sigma=1.175411 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051047Jy sigma=1.175411 ! Fit after self-cal, rms=0.051047Jy sigma=1.175411 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.128 mas, bmaj=11.46 mas, bpa=-3.251 degrees ! Estimated noise=0.689954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117598 Jy ! Component: 100 - total flux cleaned = -0.0012368 Jy ! Component: 150 - total flux cleaned = -0.00123711 Jy ! Component: 200 - total flux cleaned = -0.00127445 Jy ! Total flux subtracted in 200 components = -0.00127445 Jy ! Clean residual min=-0.005254 max=0.003230 Jy/beam ! Clean residual mean=-0.000010 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.0452557 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0452557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051079Jy sigma=1.174837 ! Fit after self-cal, rms=0.051071Jy sigma=1.174672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225555 Jy ! Component: 100 - total flux cleaned = -0.000226626 Jy ! Component: 150 - total flux cleaned = -0.000227273 Jy ! Component: 200 - total flux cleaned = -0.000242895 Jy ! Total flux subtracted in 200 components = -0.000242895 Jy ! Clean residual min=-0.005180 max=0.003235 Jy/beam ! Clean residual mean=-0.000010 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.0450128 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0450128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051081Jy sigma=1.174487 ! Fit after self-cal, rms=0.051076Jy sigma=1.174436 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 9.592 at -11.63 degrees (North through East) ! Clean map min=-0.0043952 max=0.040728 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.819 mas, bpa=-12.47 degrees ! Estimated noise=0.765176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326143 Jy ! Component: 100 - total flux cleaned = 0.0401827 Jy ! Component: 150 - total flux cleaned = 0.0435793 Jy ! Component: 200 - total flux cleaned = 0.0450405 Jy ! Total flux subtracted in 200 components = 0.0450405 Jy ! Clean residual min=-0.005313 max=0.004586 Jy/beam ! Clean residual mean=-0.000000 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0450405 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0450405 Jy ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000989766 Jy ! Component: 100 - total flux cleaned = 0.000985862 Jy ! Component: 150 - total flux cleaned = 0.00107402 Jy ! Component: 200 - total flux cleaned = 0.00115845 Jy ! Total flux subtracted in 200 components = 0.00115845 Jy ! Clean residual min=-0.005063 max=0.003516 Jy/beam ! Clean residual mean=-0.000006 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.0461989 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.0461989 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.128 mas, bmaj=11.46 mas, bpa=-3.251 degrees ! Estimated noise=0.689954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119939 Jy ! Component: 100 - total flux cleaned = -0.00119751 Jy ! Component: 150 - total flux cleaned = -0.00116794 Jy ! Component: 200 - total flux cleaned = -0.00116823 Jy ! Total flux subtracted in 200 components = -0.00116823 Jy ! Clean residual min=-0.005532 max=0.003418 Jy/beam ! Clean residual mean=-0.000010 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.0450307 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.4939e-05 Jy ! Component: 100 - total flux cleaned = -2.58249e-05 Jy ! Component: 150 - total flux cleaned = -7.13075e-05 Jy ! Component: 200 - total flux cleaned = -7.13942e-05 Jy ! Total flux subtracted in 200 components = -7.13942e-05 Jy ! Clean residual min=-0.005422 max=0.003371 Jy/beam ! Clean residual mean=-0.000010 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.0449593 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0449593 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=9.592 mas, bpa=-11.63 degrees ! Estimated noise=0.583088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075894 Jy ! Component: 100 - total flux cleaned = 0.000876334 Jy ! Component: 150 - total flux cleaned = 0.00108412 Jy ! Component: 200 - total flux cleaned = 0.00123705 Jy ! Total flux subtracted in 200 components = 0.00123705 Jy ! Clean residual min=-0.004777 max=0.003322 Jy/beam ! Clean residual mean=-0.000006 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0461963 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0461963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051063Jy sigma=1.175366 ! Fit after self-cal, rms=0.051069Jy sigma=1.175249 wmodel /J1140+1203_S_map.mod ! wmodel: Unable to open new model file: /J1140+1203_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1140+1203_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 9.592 at -11.63 degrees (North through East) ! Clean map min=-0.0046198 max=0.040452 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1140+1203_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0404518 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000969585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.19067 7.19067 14.3813 28.7627 57.5253 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.04 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 41.72 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1140+1203_S_dfm.log closed on Thu May 19 21:44:54 2016