! Started logfile: /scr/pima/bg219g_uvs/J1033+4116_S_dfm.log on Thu May 19 21:43:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219g_uvs/J1033+4116_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1033+4116_S_uva.fits
! AN table 1: 7 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.867347 visibilities/baseline/integration-bin.
! Found source: J1033+4116
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1033+4116_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.155832Jy  sigma=17.856832
! Fit after  self-cal, rms=0.425721Jy  sigma=6.635770
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.991 mas, bmaj=12.7 mas, bpa=-89.05 degrees
! Estimated noise=2.46207 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.466743 Jy
! Component: 100  -  total flux cleaned = 0.568523 Jy
! Total flux subtracted in 100 components = 0.568523 Jy
! Clean residual min=-0.029019 max=0.066442 Jy/beam
! Clean residual mean=-0.000243 rms=0.012976 Jy/beam
! Combined flux in latest and established models = 0.568523 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.568523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124461Jy  sigma=1.897199
! Fit after  self-cal, rms=0.124454Jy  sigma=1.897180
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.571 mas, bmaj=12.71 mas, bpa=88.79 degrees
! Estimated noise=2.22014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013656 Jy
! Component: 100  -  total flux cleaned = 0.0154746 Jy
! Component: 150  -  total flux cleaned = 0.0158605 Jy
! Component: 200  -  total flux cleaned = 0.0164504 Jy
! Total flux subtracted in 200 components = 0.0164504 Jy
! Clean residual min=-0.030884 max=0.066889 Jy/beam
! Clean residual mean=-0.000541 rms=0.013246 Jy/beam
! Combined flux in latest and established models = 0.584973 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 25 components and 0.584974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118532Jy  sigma=1.800710
! Fit after  self-cal, rms=0.118560Jy  sigma=1.800040
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.571 x 12.71 at 88.79 degrees (North through East)
! Clean map  min=-0.030708  max=0.59536 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.118560Jy  sigma=1.800040
! Fit after  self-cal, rms=0.118560Jy  sigma=1.800040
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.571 mas, bmaj=12.71 mas, bpa=88.79 degrees
! Estimated noise=2.22014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00060808 Jy
! Component: 100  -  total flux cleaned = 0.000988073 Jy
! Component: 150  -  total flux cleaned = 0.00133992 Jy
! Component: 200  -  total flux cleaned = 0.00134349 Jy
! Total flux subtracted in 200 components = 0.00134349 Jy
! Clean residual min=-0.032188 max=0.065650 Jy/beam
! Clean residual mean=-0.000539 rms=0.013152 Jy/beam
! Combined flux in latest and established models = 0.586317 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 49 components and 0.586317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117921Jy  sigma=1.791598
! Fit after  self-cal, rms=0.117951Jy  sigma=1.791293
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117951Jy  sigma=1.791293
! Fit after  self-cal, rms=0.117951Jy  sigma=1.791293
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.571 mas, bmaj=12.71 mas, bpa=88.79 degrees
! Estimated noise=2.22014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000185496 Jy
! Component: 100  -  total flux cleaned = -0.000192027 Jy
! Component: 150  -  total flux cleaned = -0.00019416 Jy
! Component: 200  -  total flux cleaned = -6.48994e-05 Jy
! Total flux subtracted in 200 components = -6.48994e-05 Jy
! Clean residual min=-0.032596 max=0.065104 Jy/beam
! Clean residual mean=-0.000538 rms=0.013093 Jy/beam
! Combined flux in latest and established models = 0.586252 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 69 components and 0.586252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117644Jy  sigma=1.786789
! Fit after  self-cal, rms=0.117670Jy  sigma=1.786530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-110.5, -63).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501339 Jy
! Component: 100  -  total flux cleaned = 0.0537696 Jy
! Component: 150  -  total flux cleaned = 0.0575733 Jy
! Component: 200  -  total flux cleaned = 0.0608609 Jy
! Total flux subtracted in 200 components = 0.0608609 Jy
! Clean residual min=-0.025751 max=0.035537 Jy/beam
! Clean residual mean=-0.000229 rms=0.008020 Jy/beam
! Combined flux in latest and established models = 0.647113 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 103 components and 0.647113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090881Jy  sigma=1.400636
! Fit after  self-cal, rms=0.088101Jy  sigma=1.350079
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088101Jy  sigma=1.350079
! Fit after  self-cal, rms=0.076868Jy  sigma=1.158322
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.577 mas, bmaj=12.77 mas, bpa=88.82 degrees
! Estimated noise=2.21409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00562526 Jy
! Component: 100  -  total flux cleaned = -0.00564606 Jy
! Component: 150  -  total flux cleaned = -0.00563855 Jy
! Component: 200  -  total flux cleaned = -0.00584913 Jy
! Total flux subtracted in 200 components = -0.00584913 Jy
! Clean residual min=-0.014156 max=0.015782 Jy/beam
! Clean residual mean=0.000007 rms=0.004313 Jy/beam
! Combined flux in latest and established models = 0.641264 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 142 components and 0.641264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074911Jy  sigma=1.114105
! Fit after  self-cal, rms=0.074905Jy  sigma=1.113292
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284037 Jy
! Component: 100  -  total flux cleaned = 0.000488185 Jy
! Component: 150  -  total flux cleaned = 0.000160762 Jy
! Component: 200  -  total flux cleaned = -0.000300608 Jy
! Total flux subtracted in 200 components = -0.000300608 Jy
! Clean residual min=-0.013985 max=0.014876 Jy/beam
! Clean residual mean=0.000001 rms=0.004157 Jy/beam
! Combined flux in latest and established models = 0.640963 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 165 components and 0.640963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074185Jy  sigma=1.101342
! Fit after  self-cal, rms=0.074189Jy  sigma=1.100765
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074189Jy  sigma=1.100765
! Fit after  self-cal, rms=0.066954Jy  sigma=0.937933
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.222 mas, bmaj=13.03 mas, bpa=86.05 degrees
! Estimated noise=2.33453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00450649 Jy
! Component: 100  -  total flux cleaned = -0.00672045 Jy
! Component: 150  -  total flux cleaned = -0.00829397 Jy
! Component: 200  -  total flux cleaned = -0.0090234 Jy
! Total flux subtracted in 200 components = -0.0090234 Jy
! Clean residual min=-0.010015 max=0.013387 Jy/beam
! Clean residual mean=0.000131 rms=0.003223 Jy/beam
! Combined flux in latest and established models = 0.63194 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 202 components and 0.63194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065752Jy  sigma=0.920472
! Fit after  self-cal, rms=0.065726Jy  sigma=0.918883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000273621 Jy
! Component: 100  -  total flux cleaned = -0.000843699 Jy
! Component: 150  -  total flux cleaned = -0.00113099 Jy
! Component: 200  -  total flux cleaned = -0.00129932 Jy
! Total flux subtracted in 200 components = -0.00129932 Jy
! Clean residual min=-0.009142 max=0.012655 Jy/beam
! Clean residual mean=0.000108 rms=0.003059 Jy/beam
! Combined flux in latest and established models = 0.63064 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 231 components and 0.63064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065403Jy  sigma=0.914932
! Fit after  self-cal, rms=0.065398Jy  sigma=0.914596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.57 mas, bmaj=12.78 mas, bpa=88.7 degrees
! Estimated noise=2.23436 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.57 x 12.78 at 88.7 degrees (North through East)
! Clean map  min=-0.010478  max=0.57708 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065398Jy  sigma=0.914596
! Fit after  self-cal, rms=0.059851Jy  sigma=0.804248
! Inverting map and beam 
! Estimated beam: bmin=6.558 mas, bmaj=12.78 mas, bpa=88.67 degrees
! Estimated noise=2.23298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00419755 Jy
! Component: 100  -  total flux cleaned = -0.00542697 Jy
! Component: 150  -  total flux cleaned = -0.00678887 Jy
! Component: 200  -  total flux cleaned = -0.00743519 Jy
! Total flux subtracted in 200 components = -0.00743519 Jy
! Clean residual min=-0.010948 max=0.010607 Jy/beam
! Clean residual mean=0.000061 rms=0.002595 Jy/beam
! Combined flux in latest and established models = 0.623205 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 246 components and 0.623205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059317Jy  sigma=0.794997
! Fit after  self-cal, rms=0.059290Jy  sigma=0.794502
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117372 Jy
! Component: 100  -  total flux cleaned = -0.00157605 Jy
! Component: 150  -  total flux cleaned = -0.00165004 Jy
! Component: 200  -  total flux cleaned = -0.00165054 Jy
! Total flux subtracted in 200 components = -0.00165054 Jy
! Clean residual min=-0.010578 max=0.010321 Jy/beam
! Clean residual mean=0.000051 rms=0.002540 Jy/beam
! Combined flux in latest and established models = 0.621554 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 263 components and 0.621554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059116Jy  sigma=0.791204
! Fit after  self-cal, rms=0.059106Jy  sigma=0.791117
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059106Jy  sigma=0.791117
! Fit after  self-cal, rms=0.059026Jy  sigma=0.788012
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.994 mas, bmaj=12.75 mas, bpa=-89.27 degrees
! Estimated noise=2.47973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.469642 Jy
! Component: 100  -  total flux cleaned = 0.575642 Jy
! Component: 150  -  total flux cleaned = 0.610638 Jy
! Component: 200  -  total flux cleaned = 0.621741 Jy
! Total flux subtracted in 200 components = 0.621741 Jy
! Clean residual min=-0.013636 max=0.013563 Jy/beam
! Clean residual mean=0.000021 rms=0.004498 Jy/beam
! Combined flux in latest and established models = 0.621741 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.621741 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.558 mas, bmaj=12.79 mas, bpa=88.63 degrees
! Estimated noise=2.23342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190965 Jy
! Component: 100  -  total flux cleaned = 0.00275656 Jy
! Component: 150  -  total flux cleaned = 0.00275584 Jy
! Component: 200  -  total flux cleaned = 0.00304568 Jy
! Total flux subtracted in 200 components = 0.00304568 Jy
! Clean residual min=-0.012525 max=0.011823 Jy/beam
! Clean residual mean=0.000078 rms=0.003386 Jy/beam
! Combined flux in latest and established models = 0.624787 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 46 components and 0.624787 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.213 mas, bmaj=13.03 mas, bpa=85.97 degrees
! Estimated noise=2.33548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334639 Jy
! Component: 100  -  total flux cleaned = -5.8918e-05 Jy
! Component: 150  -  total flux cleaned = 0.00012204 Jy
! Component: 200  -  total flux cleaned = -0.00019729 Jy
! Total flux subtracted in 200 components = -0.00019729 Jy
! Clean residual min=-0.010593 max=0.011857 Jy/beam
! Clean residual mean=0.000104 rms=0.003176 Jy/beam
! Combined flux in latest and established models = 0.624589 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000429554 Jy
! Component: 100  -  total flux cleaned = -0.000694287 Jy
! Component: 150  -  total flux cleaned = -0.00117681 Jy
! Component: 200  -  total flux cleaned = -0.00151409 Jy
! Total flux subtracted in 200 components = -0.00151409 Jy
! Clean residual min=-0.009981 max=0.011575 Jy/beam
! Clean residual mean=0.000093 rms=0.002968 Jy/beam
! Combined flux in latest and established models = 0.623075 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 95 components and 0.623075 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.558 mas, bmaj=12.79 mas, bpa=88.63 degrees
! Estimated noise=2.23342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000722411 Jy
! Component: 100  -  total flux cleaned = -0.00153277 Jy
! Component: 150  -  total flux cleaned = -0.00174125 Jy
! Component: 200  -  total flux cleaned = -0.00193688 Jy
! Total flux subtracted in 200 components = -0.00193688 Jy
! Clean residual min=-0.010863 max=0.010635 Jy/beam
! Clean residual mean=0.000060 rms=0.002620 Jy/beam
! Combined flux in latest and established models = 0.621139 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 121 components and 0.621138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059288Jy  sigma=0.788428
! Fit after  self-cal, rms=0.059188Jy  sigma=0.787151
wmodel /J1033+4116_S_map.mod
! wmodel: Unable to open new model file: /J1033+4116_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1033+4116_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.558 x 12.79 at 88.63 degrees (North through East)
! Clean map  min=-0.010672  max=0.57787 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1033+4116_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.577875 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00260098 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.35028 1.35028 2.70056 5.40112 10.8022 21.6045 43.209 86.4179
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0078 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.577 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  222.176 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1033+4116_S_dfm.log closed on Thu May 19 21:43:17 2016