! Started logfile: /scr/pima/bg219g_uvs/J0610+7801_S_dfm.log on Thu May 19 21:42:01 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J0610+7801_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J0610+7801_S_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.905754 visibilities/baseline/integration-bin. ! Found source: J0610+7801 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 3652 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0610+7801_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.010000Jy sigma=18.939731 ! Fit after self-cal, rms=0.877803Jy sigma=16.497682 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=10.5 mas, bpa=41.94 degrees ! Estimated noise=1.08704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0950697 Jy ! Component: 100 - total flux cleaned = 0.115933 Jy ! Total flux subtracted in 100 components = 0.115933 Jy ! Clean residual min=-0.005594 max=0.006751 Jy/beam ! Clean residual mean=-0.000005 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.115933 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.115933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077444Jy sigma=1.338552 ! Fit after self-cal, rms=0.077426Jy sigma=1.338385 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=11.15 mas, bpa=41.73 degrees ! Estimated noise=0.653082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661506 Jy ! Component: 100 - total flux cleaned = 0.00734409 Jy ! Component: 150 - total flux cleaned = 0.00789639 Jy ! Component: 200 - total flux cleaned = 0.00818357 Jy ! Total flux subtracted in 200 components = 0.00818357 Jy ! Clean residual min=-0.004504 max=0.004878 Jy/beam ! Clean residual mean=-0.000013 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.124117 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.124117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076047Jy sigma=1.312934 ! Fit after self-cal, rms=0.076034Jy sigma=1.312664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 11.15 at 41.73 degrees (North through East) ! Clean map min=-0.006433 max=0.12693 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.03 KP 0.95 LA 0.88 ! MK 0.96 NL 0.92 OV 1.03 PT 1.06 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.01 KP 0.96 LA 0.87 ! MK 1.02 NL 0.85 OV 1.03 PT 1.06 ! SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 1.06 KP 1.02 LA 0.95 ! MK 1.00 NL 1.19 OV 1.03 PT 1.07 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.076034Jy sigma=1.312664 ! Fit after self-cal, rms=0.074522Jy sigma=1.293103 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=11.18 mas, bpa=41.92 degrees ! Estimated noise=0.652534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00065502 Jy ! Component: 100 - total flux cleaned = -0.00132485 Jy ! Component: 150 - total flux cleaned = -0.00162671 Jy ! Component: 200 - total flux cleaned = -0.00177791 Jy ! Total flux subtracted in 200 components = -0.00177791 Jy ! Clean residual min=-0.003124 max=0.002804 Jy/beam ! Clean residual mean=-0.000002 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.122339 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.122339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074399Jy sigma=1.290783 ! Fit after self-cal, rms=0.074403Jy sigma=1.290356 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074403Jy sigma=1.290356 ! Fit after self-cal, rms=0.074881Jy sigma=1.289938 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=11.17 mas, bpa=41.99 degrees ! Estimated noise=0.655506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000287358 Jy ! Component: 100 - total flux cleaned = -0.000670836 Jy ! Component: 150 - total flux cleaned = -0.000763532 Jy ! Component: 200 - total flux cleaned = -0.000724566 Jy ! Total flux subtracted in 200 components = -0.000724566 Jy ! Clean residual min=-0.003083 max=0.002802 Jy/beam ! Clean residual mean=-0.000002 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.121614 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.121614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074815Jy sigma=1.288601 ! Fit after self-cal, rms=0.074822Jy sigma=1.288579 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.00495e-06 Jy ! Component: 100 - total flux cleaned = -6.4625e-06 Jy ! Component: 150 - total flux cleaned = -3.46513e-05 Jy ! Component: 200 - total flux cleaned = -3.42601e-05 Jy ! Total flux subtracted in 200 components = -3.42601e-05 Jy ! Clean residual min=-0.003036 max=0.002737 Jy/beam ! Clean residual mean=-0.000002 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.12158 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.12158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074798Jy sigma=1.288188 ! Fit after self-cal, rms=0.074798Jy sigma=1.288177 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074798Jy sigma=1.288177 ! Fit after self-cal, rms=0.075204Jy sigma=1.287724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=11.15 mas, bpa=42.03 degrees ! Estimated noise=0.658638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237304 Jy ! Component: 100 - total flux cleaned = -0.000438444 Jy ! Component: 150 - total flux cleaned = -0.000632642 Jy ! Component: 200 - total flux cleaned = -0.00063445 Jy ! Total flux subtracted in 200 components = -0.00063445 Jy ! Clean residual min=-0.003034 max=0.002803 Jy/beam ! Clean residual mean=-0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.120945 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.120945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075172Jy sigma=1.286926 ! Fit after self-cal, rms=0.075178Jy sigma=1.286918 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.53547e-05 Jy ! Component: 100 - total flux cleaned = 4.85069e-05 Jy ! Component: 150 - total flux cleaned = 2.62941e-05 Jy ! Component: 200 - total flux cleaned = 2.64234e-05 Jy ! Total flux subtracted in 200 components = 2.64234e-05 Jy ! Clean residual min=-0.003008 max=0.002742 Jy/beam ! Clean residual mean=-0.000002 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.120972 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.120972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075164Jy sigma=1.286721 ! Fit after self-cal, rms=0.075164Jy sigma=1.286719 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075164Jy sigma=1.286719 ! Fit after self-cal, rms=0.074407Jy sigma=1.281265 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.903 mas, bmaj=15.34 mas, bpa=35.46 degrees ! Estimated noise=0.836058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103089 Jy ! Component: 100 - total flux cleaned = -5.48065e-05 Jy ! Component: 150 - total flux cleaned = -3.71293e-05 Jy ! Component: 200 - total flux cleaned = -2.20814e-05 Jy ! Total flux subtracted in 200 components = -2.20814e-05 Jy ! Clean residual min=-0.002228 max=0.003139 Jy/beam ! Clean residual mean=-0.000002 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.12095 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.12095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074391Jy sigma=1.280974 ! Fit after self-cal, rms=0.074416Jy sigma=1.280822 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.9084e-05 Jy ! Component: 100 - total flux cleaned = -3.86591e-05 Jy ! Component: 150 - total flux cleaned = -3.87718e-05 Jy ! Component: 200 - total flux cleaned = -3.03675e-05 Jy ! Total flux subtracted in 200 components = -3.03675e-05 Jy ! Clean residual min=-0.002206 max=0.003127 Jy/beam ! Clean residual mean=-0.000002 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.120919 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.120919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074414Jy sigma=1.280779 ! Fit after self-cal, rms=0.074413Jy sigma=1.280776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=11.18 mas, bpa=42.1 degrees ! Estimated noise=0.657569 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 11.18 at 42.1 degrees (North through East) ! Clean map min=-0.0077782 max=0.12918 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=10.5 mas, bpa=42.2 degrees ! Estimated noise=1.11285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0971834 Jy ! Component: 100 - total flux cleaned = 0.118607 Jy ! Component: 150 - total flux cleaned = 0.122482 Jy ! Component: 200 - total flux cleaned = 0.123123 Jy ! Total flux subtracted in 200 components = 0.123123 Jy ! Clean residual min=-0.004189 max=0.004219 Jy/beam ! Clean residual mean=0.000000 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.123123 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.123123 Jy ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=11.18 mas, bpa=42.1 degrees ! Estimated noise=0.657569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403358 Jy ! Component: 100 - total flux cleaned = -0.00023473 Jy ! Component: 150 - total flux cleaned = -0.000563117 Jy ! Component: 200 - total flux cleaned = -0.000819164 Jy ! Total flux subtracted in 200 components = -0.000819164 Jy ! Clean residual min=-0.002839 max=0.002746 Jy/beam ! Clean residual mean=0.000001 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.122303 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.122303 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.903 mas, bmaj=15.34 mas, bpa=35.46 degrees ! Estimated noise=0.836058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.12455e-05 Jy ! Component: 100 - total flux cleaned = -0.000171811 Jy ! Component: 150 - total flux cleaned = -0.000373266 Jy ! Component: 200 - total flux cleaned = -0.000537442 Jy ! Total flux subtracted in 200 components = -0.000537442 Jy ! Clean residual min=-0.002569 max=0.003084 Jy/beam ! Clean residual mean=-0.000000 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.121766 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.34371e-05 Jy ! Component: 100 - total flux cleaned = -0.000156109 Jy ! Component: 150 - total flux cleaned = -0.000177877 Jy ! Component: 200 - total flux cleaned = -0.000177976 Jy ! Total flux subtracted in 200 components = -0.000177976 Jy ! Clean residual min=-0.002435 max=0.003132 Jy/beam ! Clean residual mean=-0.000001 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.121588 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 78 components and 0.121588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=11.18 mas, bpa=42.1 degrees ! Estimated noise=0.657569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.86451e-05 Jy ! Component: 100 - total flux cleaned = 0.000233706 Jy ! Component: 150 - total flux cleaned = 0.000193032 Jy ! Component: 200 - total flux cleaned = 0.000193299 Jy ! Total flux subtracted in 200 components = 0.000193299 Jy ! Clean residual min=-0.002430 max=0.003006 Jy/beam ! Clean residual mean=0.000000 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.121781 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.121781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074481Jy sigma=1.281566 ! Fit after self-cal, rms=0.074464Jy sigma=1.281450 wmodel /J0610+7801_S_map.mod ! wmodel: Unable to open new model file: /J0610+7801_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J0610+7801_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 11.18 at 42.1 degrees (North through East) ! Clean map min=-0.0074671 max=0.12902 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J0610+7801_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.129024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00066832 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.55394 1.55394 3.10788 6.21576 12.4315 24.863 49.7261 99.4521 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.129 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 193.057 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J0610+7801_S_dfm.log closed on Thu May 19 21:42:04 2016