! Started logfile: /scr/pima/bg219e_uvs/J2352+7044_X_dfm.log on Thu May 19 18:59:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2352+7044_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2352+7044_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.923387 visibilities/baseline/integration-bin.
! Found source: J2352+7044
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24732 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2352+7044_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022411Jy  sigma=23.147235
! Fit after  self-cal, rms=0.817872Jy  sigma=18.428238
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.336 mas, bpa=57.58 degrees
! Estimated noise=0.522069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141296 Jy
! Component: 100  -  total flux cleaned = 0.17312 Jy
! Total flux subtracted in 100 components = 0.17312 Jy
! Clean residual min=-0.005385 max=0.011359 Jy/beam
! Clean residual mean=0.000034 rms=0.001515 Jy/beam
! Combined flux in latest and established models = 0.17312 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.17312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069804Jy  sigma=1.471321
! Fit after  self-cal, rms=0.069785Jy  sigma=1.470868
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121296 Jy
! Component: 100  -  total flux cleaned = 0.0180434 Jy
! Total flux subtracted in 100 components = 0.0180434 Jy
! Clean residual min=-0.004218 max=0.008816 Jy/beam
! Clean residual mean=0.000020 rms=0.001145 Jy/beam
! Combined flux in latest and established models = 0.191164 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.191164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067617Jy  sigma=1.410720
! Fit after  self-cal, rms=0.067612Jy  sigma=1.410229
! Inverting map 
! Added new window around map position (-2, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740713 Jy
! Component: 100  -  total flux cleaned = 0.0109566 Jy
! Total flux subtracted in 100 components = 0.0109566 Jy
! Clean residual min=-0.003892 max=0.004703 Jy/beam
! Clean residual mean=0.000009 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.20212 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.20212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066923Jy  sigma=1.392129
! Fit after  self-cal, rms=0.066872Jy  sigma=1.390546
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.171 mas, bmaj=2.638 mas, bpa=58.39 degrees
! Estimated noise=0.216017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.6, -13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00553842 Jy
! Component: 100  -  total flux cleaned = 0.00911755 Jy
! Component: 150  -  total flux cleaned = 0.0118951 Jy
! Component: 200  -  total flux cleaned = 0.0141956 Jy
! Total flux subtracted in 200 components = 0.0141956 Jy
! Clean residual min=-0.002575 max=0.002770 Jy/beam
! Clean residual mean=0.000008 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.216316 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 70 components and 0.216316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066334Jy  sigma=1.375579
! Fit after  self-cal, rms=0.066300Jy  sigma=1.374951
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.171 x 2.638 at 58.39 degrees (North through East)
! Clean map  min=-0.0021881  max=0.1862 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.00     KP        0.97     
!   LA        1.00     NL        0.99     OV        0.99     PT        0.99     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.98     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.00     KP        1.00     
!   LA        0.98     NL        0.99     OV        1.00     PT        0.96     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.97     PT        0.99     
!   SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        1.00     
!   LA        0.98     NL        0.98     OV        0.99     PT        0.96     
!   SC        1.07     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.00     KP        0.97     
!   LA        1.01     NL        1.02     OV        0.98     PT        1.03     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.97     KP        0.99     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.08     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.97     KP        0.98     
!   LA        1.01     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     NL        1.03     OV        0.99     PT        0.99     
!   SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.00     NL        1.00     OV        1.02     PT        0.97     
!   SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        1.01     
!   LA        0.99     NL        1.00     OV        1.01     PT        0.98     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.066300Jy  sigma=1.374951
! Fit after  self-cal, rms=0.066447Jy  sigma=1.368393
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.186 mas, bmaj=2.645 mas, bpa=58.33 degrees
! Estimated noise=0.214488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248152 Jy
! Component: 100  -  total flux cleaned = 0.0039177 Jy
! Component: 150  -  total flux cleaned = 0.00509358 Jy
! Component: 200  -  total flux cleaned = 0.0059806 Jy
! Total flux subtracted in 200 components = 0.0059806 Jy
! Clean residual min=-0.002204 max=0.002034 Jy/beam
! Clean residual mean=-0.000003 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.222297 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 96 components and 0.222297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066307Jy  sigma=1.364935
! Fit after  self-cal, rms=0.066314Jy  sigma=1.364652
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066314Jy  sigma=1.364652
! Fit after  self-cal, rms=0.066793Jy  sigma=1.359412
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.183 mas, bmaj=2.654 mas, bpa=57.96 degrees
! Estimated noise=0.214802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426965 Jy
! Component: 100  -  total flux cleaned = 0.000939103 Jy
! Component: 150  -  total flux cleaned = 0.00149129 Jy
! Component: 200  -  total flux cleaned = 0.00199975 Jy
! Total flux subtracted in 200 components = 0.00199975 Jy
! Clean residual min=-0.001465 max=0.001253 Jy/beam
! Clean residual mean=-0.000003 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.224296 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.224296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066735Jy  sigma=1.358173
! Fit after  self-cal, rms=0.066741Jy  sigma=1.358075
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00063516 Jy
! Component: 100  -  total flux cleaned = 0.000929058 Jy
! Component: 150  -  total flux cleaned = 0.00121734 Jy
! Component: 200  -  total flux cleaned = 0.00142968 Jy
! Total flux subtracted in 200 components = 0.00142968 Jy
! Clean residual min=-0.001378 max=0.001167 Jy/beam
! Clean residual mean=-0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.225726 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.225726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066718Jy  sigma=1.357615
! Fit after  self-cal, rms=0.066717Jy  sigma=1.357588
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066717Jy  sigma=1.357588
! Fit after  self-cal, rms=0.066740Jy  sigma=1.357463
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.183 mas, bmaj=2.656 mas, bpa=57.9 degrees
! Estimated noise=0.214451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000341954 Jy
! Component: 100  -  total flux cleaned = -0.000119042 Jy
! Component: 150  -  total flux cleaned = 0.000123639 Jy
! Component: 200  -  total flux cleaned = 0.000281885 Jy
! Total flux subtracted in 200 components = 0.000281885 Jy
! Clean residual min=-0.001259 max=0.001109 Jy/beam
! Clean residual mean=-0.000002 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.226008 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 138 components and 0.226008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066722Jy  sigma=1.357098
! Fit after  self-cal, rms=0.066723Jy  sigma=1.357079
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291597 Jy
! Component: 100  -  total flux cleaned = 0.000455201 Jy
! Component: 150  -  total flux cleaned = 0.000571767 Jy
! Component: 200  -  total flux cleaned = 0.000649972 Jy
! Total flux subtracted in 200 components = 0.000649972 Jy
! Clean residual min=-0.001210 max=0.001079 Jy/beam
! Clean residual mean=-0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.226658 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 150 components and 0.226658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066714Jy  sigma=1.356902
! Fit after  self-cal, rms=0.066714Jy  sigma=1.356897
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066714Jy  sigma=1.356897
! Fit after  self-cal, rms=0.066737Jy  sigma=1.356847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.215 mas, bmaj=3.294 mas, bpa=65.49 degrees
! Estimated noise=0.242289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498219 Jy
! Component: 100  -  total flux cleaned = 0.000653 Jy
! Component: 150  -  total flux cleaned = 0.000735959 Jy
! Component: 200  -  total flux cleaned = 0.000780977 Jy
! Total flux subtracted in 200 components = 0.000780977 Jy
! Clean residual min=-0.001284 max=0.001101 Jy/beam
! Clean residual mean=-0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.227439 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 162 components and 0.227439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066733Jy  sigma=1.356733
! Fit after  self-cal, rms=0.066734Jy  sigma=1.356721
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174604 Jy
! Component: 100  -  total flux cleaned = 0.000243706 Jy
! Component: 150  -  total flux cleaned = 0.000278252 Jy
! Component: 200  -  total flux cleaned = 0.000302005 Jy
! Total flux subtracted in 200 components = 0.000302005 Jy
! Clean residual min=-0.001257 max=0.001089 Jy/beam
! Clean residual mean=-0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.227741 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 173 components and 0.227741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066733Jy  sigma=1.356700
! Fit after  self-cal, rms=0.066733Jy  sigma=1.356695
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.184 mas, bmaj=2.658 mas, bpa=57.86 degrees
! Estimated noise=0.214233 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.184 x 2.658 at 57.86 degrees (North through East)
! Clean map  min=-0.0011375  max=0.18444 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8937 mas, bmaj=2.358 mas, bpa=56.99 degrees
! Estimated noise=0.524404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141803 Jy
! Component: 100  -  total flux cleaned = 0.173217 Jy
! Component: 150  -  total flux cleaned = 0.184627 Jy
! Component: 200  -  total flux cleaned = 0.191925 Jy
! Total flux subtracted in 200 components = 0.191925 Jy
! Clean residual min=-0.003537 max=0.003951 Jy/beam
! Clean residual mean=0.000016 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.191925 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.191925 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.184 mas, bmaj=2.658 mas, bpa=57.86 degrees
! Estimated noise=0.214233 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0062807 Jy
! Component: 100  -  total flux cleaned = 0.0106212 Jy
! Component: 150  -  total flux cleaned = 0.0140528 Jy
! Component: 200  -  total flux cleaned = 0.0169053 Jy
! Total flux subtracted in 200 components = 0.0169053 Jy
! Clean residual min=-0.001776 max=0.001943 Jy/beam
! Clean residual mean=0.000013 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.208831 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 64 components and 0.208831 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.215 mas, bmaj=3.294 mas, bpa=65.49 degrees
! Estimated noise=0.242289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035281 Jy
! Component: 100  -  total flux cleaned = 0.00618198 Jy
! Component: 150  -  total flux cleaned = 0.0083359 Jy
! Component: 200  -  total flux cleaned = 0.010122 Jy
! Total flux subtracted in 200 components = 0.010122 Jy
! Clean residual min=-0.001665 max=0.001628 Jy/beam
! Clean residual mean=0.000010 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.218953 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149409 Jy
! Component: 100  -  total flux cleaned = 0.00275008 Jy
! Component: 150  -  total flux cleaned = 0.00380893 Jy
! Component: 200  -  total flux cleaned = 0.00470531 Jy
! Total flux subtracted in 200 components = 0.00470531 Jy
! Clean residual min=-0.001421 max=0.001163 Jy/beam
! Clean residual mean=0.000003 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.223658 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 155 components and 0.223658 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.184 mas, bmaj=2.658 mas, bpa=57.86 degrees
! Estimated noise=0.214233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928422 Jy
! Component: 100  -  total flux cleaned = 0.00152928 Jy
! Component: 150  -  total flux cleaned = 0.00192249 Jy
! Component: 200  -  total flux cleaned = 0.00220527 Jy
! Total flux subtracted in 200 components = 0.00220527 Jy
! Clean residual min=-0.001223 max=0.001037 Jy/beam
! Clean residual mean=-0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.225863 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 175 components and 0.225863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066773Jy  sigma=1.357180
! Fit after  self-cal, rms=0.066760Jy  sigma=1.357055
wmodel /J2352+7044_X_map.mod
! wmodel: Unable to open new model file: /J2352+7044_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2352+7044_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.184 x 2.658 at 57.86 degrees (North through East)
! Clean map  min=-0.0011938  max=0.18481 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2352+7044_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.184812 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000276656 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.449088 0.449088 0.898176 1.79635 3.5927 7.18541 14.3708 28.7416 57.4833
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.184 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  668.02 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2352+7044_X_dfm.log closed on Thu May 19 18:59:06 2016