! Started logfile: /scr/pima/bg219e_uvs/J2312+7241_X_dfm.log on Thu May 19 18:58:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2312+7241_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2312+7241_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881614 visibilities/baseline/integration-bin.
! Found source: J2312+7241
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2312+7241_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026208Jy  sigma=22.862108
! Fit after  self-cal, rms=0.800071Jy  sigma=17.766568
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8916 mas, bmaj=2.461 mas, bpa=49.22 degrees
! Estimated noise=0.556752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154104 Jy
! Component: 100  -  total flux cleaned = 0.188544 Jy
! Total flux subtracted in 100 components = 0.188544 Jy
! Clean residual min=-0.006258 max=0.012322 Jy/beam
! Clean residual mean=0.000024 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.188544 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.188544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071083Jy  sigma=1.473970
! Fit after  self-cal, rms=0.071034Jy  sigma=1.473035
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133733 Jy
! Component: 100  -  total flux cleaned = 0.0202285 Jy
! Total flux subtracted in 100 components = 0.0202285 Jy
! Clean residual min=-0.004193 max=0.008147 Jy/beam
! Clean residual mean=0.000016 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.208772 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.208772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067921Jy  sigma=1.392139
! Fit after  self-cal, rms=0.067920Jy  sigma=1.391665
! Inverting map 
! Added new window around map position (-2.8, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693699 Jy
! Component: 100  -  total flux cleaned = 0.00932512 Jy
! Total flux subtracted in 100 components = 0.00932512 Jy
! Clean residual min=-0.003490 max=0.004085 Jy/beam
! Clean residual mean=0.000013 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.218098 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 0.218098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067082Jy  sigma=1.370797
! Fit after  self-cal, rms=0.067066Jy  sigma=1.370202
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=2.711 mas, bpa=48.71 degrees
! Estimated noise=0.266947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00502814 Jy
! Component: 100  -  total flux cleaned = 0.00822766 Jy
! Component: 150  -  total flux cleaned = 0.01052 Jy
! Component: 200  -  total flux cleaned = 0.0122165 Jy
! Total flux subtracted in 200 components = 0.0122165 Jy
! Clean residual min=-0.002231 max=0.002217 Jy/beam
! Clean residual mean=0.000015 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.230314 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 71 components and 0.230314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066633Jy  sigma=1.359470
! Fit after  self-cal, rms=0.066622Jy  sigma=1.359077
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.114 x 2.711 at 48.71 degrees (North through East)
! Clean map  min=-0.0020491  max=0.20401 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        1.01     
!   LA        1.02     NL        1.03     OV        0.97     PT        0.98     
!   SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.97     
!   LA        0.98     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.02     
!   LA        0.99     NL        0.99     OV        1.01     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.98     NL        1.02     OV        1.00     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.99     KP        0.99     
!   LA        1.00     NL        0.99     OV        1.00     PT        0.98     
!   SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.00     KP        0.99     
!   LA        0.98     NL        0.99     OV        0.97     PT        1.02     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.99     KP        0.95     
!   LA        1.01     NL        1.02     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.98     NL        1.02     OV        0.98     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.98     KP        0.99     
!   LA        0.98     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.98     NL        1.02     OV        0.96     PT        0.97     
!   SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.95     KP        0.99     
!   LA        1.00     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.066622Jy  sigma=1.359077
! Fit after  self-cal, rms=0.066384Jy  sigma=1.352999
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=2.714 mas, bpa=48.62 degrees
! Estimated noise=0.265878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141029 Jy
! Component: 100  -  total flux cleaned = 0.00181826 Jy
! Component: 150  -  total flux cleaned = 0.00184624 Jy
! Component: 200  -  total flux cleaned = 0.00192418 Jy
! Total flux subtracted in 200 components = 0.00192418 Jy
! Clean residual min=-0.001770 max=0.001906 Jy/beam
! Clean residual mean=0.000007 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.232238 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 86 components and 0.232238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066343Jy  sigma=1.351903
! Fit after  self-cal, rms=0.066351Jy  sigma=1.351747
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066351Jy  sigma=1.351747
! Fit after  self-cal, rms=0.066543Jy  sigma=1.347228
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.12 mas, bmaj=2.722 mas, bpa=48.56 degrees
! Estimated noise=0.265889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00083305 Jy
! Component: 100  -  total flux cleaned = 0.00117018 Jy
! Component: 150  -  total flux cleaned = 0.00135751 Jy
! Component: 200  -  total flux cleaned = 0.00138895 Jy
! Total flux subtracted in 200 components = 0.00138895 Jy
! Clean residual min=-0.001694 max=0.001475 Jy/beam
! Clean residual mean=0.000006 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.233627 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 100 components and 0.233627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066520Jy  sigma=1.346681
! Fit after  self-cal, rms=0.066529Jy  sigma=1.346564
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000263088 Jy
! Component: 100  -  total flux cleaned = 0.000380082 Jy
! Component: 150  -  total flux cleaned = 0.000437298 Jy
! Component: 200  -  total flux cleaned = 0.00045032 Jy
! Total flux subtracted in 200 components = 0.00045032 Jy
! Clean residual min=-0.001693 max=0.001435 Jy/beam
! Clean residual mean=0.000006 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.234078 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.234078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066521Jy  sigma=1.346406
! Fit after  self-cal, rms=0.066522Jy  sigma=1.346388
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066522Jy  sigma=1.346388
! Fit after  self-cal, rms=0.066616Jy  sigma=1.346319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.12 mas, bmaj=2.723 mas, bpa=48.54 degrees
! Estimated noise=0.265918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.38042e-05 Jy
! Component: 100  -  total flux cleaned = 8.34596e-05 Jy
! Component: 150  -  total flux cleaned = 9.67799e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109367 Jy
! Total flux subtracted in 200 components = 0.000109367 Jy
! Clean residual min=-0.001662 max=0.001410 Jy/beam
! Clean residual mean=0.000005 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.234187 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 110 components and 0.234187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066610Jy  sigma=1.346177
! Fit after  self-cal, rms=0.066612Jy  sigma=1.346168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129728 Jy
! Component: 100  -  total flux cleaned = 0.000141 Jy
! Component: 150  -  total flux cleaned = 0.00014116 Jy
! Component: 200  -  total flux cleaned = 0.000151454 Jy
! Total flux subtracted in 200 components = 0.000151454 Jy
! Clean residual min=-0.001648 max=0.001401 Jy/beam
! Clean residual mean=0.000005 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.234338 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 111 components and 0.234338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066608Jy  sigma=1.346094
! Fit after  self-cal, rms=0.066609Jy  sigma=1.346090
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066609Jy  sigma=1.346090
! Fit after  self-cal, rms=0.066654Jy  sigma=1.346069
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.143 mas, bmaj=3.37 mas, bpa=54.1 degrees
! Estimated noise=0.307893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42973e-06 Jy
! Component: 100  -  total flux cleaned = -6.2382e-06 Jy
! Component: 150  -  total flux cleaned = 3.03223e-07 Jy
! Component: 200  -  total flux cleaned = 6.07543e-06 Jy
! Total flux subtracted in 200 components = 6.07543e-06 Jy
! Clean residual min=-0.001510 max=0.001501 Jy/beam
! Clean residual mean=0.000008 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.234344 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 120 components and 0.234344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066653Jy  sigma=1.346054
! Fit after  self-cal, rms=0.066654Jy  sigma=1.346047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.51374e-05 Jy
! Component: 100  -  total flux cleaned = 0.000102993 Jy
! Component: 150  -  total flux cleaned = 0.000108052 Jy
! Component: 200  -  total flux cleaned = 0.000112478 Jy
! Total flux subtracted in 200 components = 0.000112478 Jy
! Clean residual min=-0.001502 max=0.001503 Jy/beam
! Clean residual mean=0.000008 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.234457 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 123 components and 0.234457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066654Jy  sigma=1.346056
! Fit after  self-cal, rms=0.066654Jy  sigma=1.346057
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=2.724 mas, bpa=48.52 degrees
! Estimated noise=0.265905 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.121 x 2.724 at 48.52 degrees (North through East)
! Clean map  min=-0.0015728  max=0.20302 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8959 mas, bmaj=2.471 mas, bpa=49.01 degrees
! Estimated noise=0.55733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15418 Jy
! Component: 100  -  total flux cleaned = 0.188553 Jy
! Component: 150  -  total flux cleaned = 0.201534 Jy
! Component: 200  -  total flux cleaned = 0.209543 Jy
! Total flux subtracted in 200 components = 0.209543 Jy
! Clean residual min=-0.003567 max=0.004200 Jy/beam
! Clean residual mean=0.000011 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.209543 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.209543 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=2.724 mas, bpa=48.52 degrees
! Estimated noise=0.265905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00747469 Jy
! Component: 100  -  total flux cleaned = 0.012018 Jy
! Component: 150  -  total flux cleaned = 0.0150129 Jy
! Component: 200  -  total flux cleaned = 0.0171863 Jy
! Total flux subtracted in 200 components = 0.0171863 Jy
! Clean residual min=-0.001791 max=0.001534 Jy/beam
! Clean residual mean=0.000011 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.226729 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 56 components and 0.226729 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.143 mas, bmaj=3.37 mas, bpa=54.1 degrees
! Estimated noise=0.307893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258371 Jy
! Component: 100  -  total flux cleaned = 0.00428176 Jy
! Component: 150  -  total flux cleaned = 0.00546512 Jy
! Component: 200  -  total flux cleaned = 0.00609214 Jy
! Total flux subtracted in 200 components = 0.00609214 Jy
! Clean residual min=-0.001624 max=0.001463 Jy/beam
! Clean residual mean=0.000011 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.232821 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347917 Jy
! Component: 100  -  total flux cleaned = 0.00062559 Jy
! Component: 150  -  total flux cleaned = 0.000831403 Jy
! Component: 200  -  total flux cleaned = 0.000999494 Jy
! Total flux subtracted in 200 components = 0.000999494 Jy
! Clean residual min=-0.001537 max=0.001430 Jy/beam
! Clean residual mean=0.000009 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.233821 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 109 components and 0.233821 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=2.724 mas, bpa=48.52 degrees
! Estimated noise=0.265905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112422 Jy
! Component: 100  -  total flux cleaned = 7.24202e-05 Jy
! Component: 150  -  total flux cleaned = 8.78547e-05 Jy
! Component: 200  -  total flux cleaned = 0.000132069 Jy
! Total flux subtracted in 200 components = 0.000132069 Jy
! Clean residual min=-0.001567 max=0.001410 Jy/beam
! Clean residual mean=0.000005 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.233953 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 127 components and 0.233953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066653Jy  sigma=1.345969
! Fit after  self-cal, rms=0.066650Jy  sigma=1.345951
wmodel /J2312+7241_X_map.mod
! wmodel: Unable to open new model file: /J2312+7241_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2312+7241_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.121 x 2.724 at 48.52 degrees (North through East)
! Clean map  min=-0.0014944  max=0.20314 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2312+7241_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.203138 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000341142 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.503807 0.503807 1.00761 2.01523 4.03046 8.06092 16.1218 32.2437 64.4874
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  595.465 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2312+7241_X_dfm.log closed on Thu May 19 18:58:51 2016