! Started logfile: /scr/pima/bg219e_uvs/J2312+7241_S_dfm.log on Thu May 19 18:58:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J2312+7241_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2312+7241_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881614 visibilities/baseline/integration-bin.
! Found source: J2312+7241
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5332 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2312+7241_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020992Jy  sigma=21.408649
! Fit after  self-cal, rms=0.844340Jy  sigma=17.703008
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=9.145 mas, bpa=48.4 degrees
! Estimated noise=0.766799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116841 Jy
! Component: 100  -  total flux cleaned = 0.155069 Jy
! Total flux subtracted in 100 components = 0.155069 Jy
! Clean residual min=-0.008627 max=0.017506 Jy/beam
! Clean residual mean=-0.000014 rms=0.002365 Jy/beam
! Combined flux in latest and established models = 0.155069 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.155069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077644Jy  sigma=1.516221
! Fit after  self-cal, rms=0.077302Jy  sigma=1.509652
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210113 Jy
! Component: 100  -  total flux cleaned = 0.0314674 Jy
! Total flux subtracted in 100 components = 0.0314674 Jy
! Clean residual min=-0.005359 max=0.005395 Jy/beam
! Clean residual mean=0.000001 rms=0.001335 Jy/beam
! Combined flux in latest and established models = 0.186536 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.186536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071205Jy  sigma=1.369601
! Fit after  self-cal, rms=0.070994Jy  sigma=1.364974
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.127 mas, bmaj=9.984 mas, bpa=47.33 degrees
! Estimated noise=0.491967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740857 Jy
! Component: 100  -  total flux cleaned = 0.011455 Jy
! Component: 150  -  total flux cleaned = 0.0139994 Jy
! Component: 200  -  total flux cleaned = 0.0157251 Jy
! Total flux subtracted in 200 components = 0.0157251 Jy
! Clean residual min=-0.002982 max=0.003254 Jy/beam
! Clean residual mean=0.000016 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.202261 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.202261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070188Jy  sigma=1.347645
! Fit after  self-cal, rms=0.070157Jy  sigma=1.346798
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.127 x 9.984 at 47.33 degrees (North through East)
! Clean map  min=-0.0029408  max=0.15751 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.03     KP        0.99     
!   LA        1.00     NL        1.00     OV        1.01     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.97     KP        1.05     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        0.99     
!   LA        1.01     NL        0.95     OV        1.00     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     HN        1.02     KP        1.07     
!   LA        1.03     NL        1.00     OV        1.03     PT        1.02     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070157Jy  sigma=1.346798
! Fit after  self-cal, rms=0.069446Jy  sigma=1.340382
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.147 mas, bmaj=9.994 mas, bpa=47.36 degrees
! Estimated noise=0.490101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141429 Jy
! Component: 100  -  total flux cleaned = 0.00177642 Jy
! Component: 150  -  total flux cleaned = 0.00188294 Jy
! Component: 200  -  total flux cleaned = 0.00195526 Jy
! Total flux subtracted in 200 components = 0.00195526 Jy
! Clean residual min=-0.002801 max=0.002932 Jy/beam
! Clean residual mean=0.000016 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.204217 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.204217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069411Jy  sigma=1.339616
! Fit after  self-cal, rms=0.069408Jy  sigma=1.339472
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069408Jy  sigma=1.339472
! Fit after  self-cal, rms=0.069577Jy  sigma=1.336269
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.139 mas, bmaj=10.02 mas, bpa=47.16 degrees
! Estimated noise=0.490397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000854141 Jy
! Component: 100  -  total flux cleaned = 0.000805845 Jy
! Component: 150  -  total flux cleaned = 0.000763783 Jy
! Component: 200  -  total flux cleaned = 0.000744637 Jy
! Total flux subtracted in 200 components = 0.000744637 Jy
! Clean residual min=-0.002622 max=0.002872 Jy/beam
! Clean residual mean=0.000009 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.204961 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.204961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069556Jy  sigma=1.335952
! Fit after  self-cal, rms=0.069564Jy  sigma=1.335869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-73.5, -35.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225133 Jy
! Component: 100  -  total flux cleaned = 0.0025566 Jy
! Component: 150  -  total flux cleaned = 0.00273907 Jy
! Component: 200  -  total flux cleaned = 0.00285214 Jy
! Total flux subtracted in 200 components = 0.00285214 Jy
! Clean residual min=-0.002442 max=0.002608 Jy/beam
! Clean residual mean=0.000002 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.207813 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 81 components and 0.207813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069455Jy  sigma=1.333375
! Fit after  self-cal, rms=0.069447Jy  sigma=1.333235
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069447Jy  sigma=1.333235
! Fit after  self-cal, rms=0.069495Jy  sigma=1.333127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.135 mas, bmaj=10.02 mas, bpa=47.12 degrees
! Estimated noise=0.489995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000417832 Jy
! Component: 100  -  total flux cleaned = 0.000524782 Jy
! Component: 150  -  total flux cleaned = 0.000589592 Jy
! Component: 200  -  total flux cleaned = 0.000589669 Jy
! Total flux subtracted in 200 components = 0.000589669 Jy
! Clean residual min=-0.002498 max=0.002468 Jy/beam
! Clean residual mean=0.000002 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.208403 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.208403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069464Jy  sigma=1.332440
! Fit after  self-cal, rms=0.069464Jy  sigma=1.332418
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.53091e-05 Jy
! Component: 100  -  total flux cleaned = -5.6903e-05 Jy
! Component: 150  -  total flux cleaned = -8.16846e-05 Jy
! Component: 200  -  total flux cleaned = -5.94736e-05 Jy
! Total flux subtracted in 200 components = -5.94736e-05 Jy
! Clean residual min=-0.002482 max=0.002428 Jy/beam
! Clean residual mean=0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.208344 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.208344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069448Jy  sigma=1.332082
! Fit after  self-cal, rms=0.069447Jy  sigma=1.332071
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069447Jy  sigma=1.332071
! Fit after  self-cal, rms=0.069494Jy  sigma=1.332017
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.521 mas, bmaj=12.14 mas, bpa=51.44 degrees
! Estimated noise=0.572567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150996 Jy
! Component: 100  -  total flux cleaned = 6.99922e-05 Jy
! Component: 150  -  total flux cleaned = 2.4483e-06 Jy
! Component: 200  -  total flux cleaned = -8.10715e-05 Jy
! Total flux subtracted in 200 components = -8.10715e-05 Jy
! Clean residual min=-0.002408 max=0.002401 Jy/beam
! Clean residual mean=0.000004 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.208262 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.208262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069488Jy  sigma=1.331884
! Fit after  self-cal, rms=0.069487Jy  sigma=1.331842
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.99074e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110769 Jy
! Component: 150  -  total flux cleaned = -0.000146865 Jy
! Component: 200  -  total flux cleaned = -0.000180288 Jy
! Total flux subtracted in 200 components = -0.000180288 Jy
! Clean residual min=-0.002412 max=0.002368 Jy/beam
! Clean residual mean=0.000004 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.208082 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.208082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069485Jy  sigma=1.331808
! Fit after  self-cal, rms=0.069485Jy  sigma=1.331793
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.134 mas, bmaj=10.03 mas, bpa=47.1 degrees
! Estimated noise=0.489785 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.134 x 10.03 at 47.1 degrees (North through East)
! Clean map  min=-0.0022924  max=0.15655 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.443 mas, bmaj=9.196 mas, bpa=48.06 degrees
! Estimated noise=0.765391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116123 Jy
! Component: 100  -  total flux cleaned = 0.157351 Jy
! Component: 150  -  total flux cleaned = 0.177827 Jy
! Component: 200  -  total flux cleaned = 0.188108 Jy
! Total flux subtracted in 200 components = 0.188108 Jy
! Clean residual min=-0.005238 max=0.004927 Jy/beam
! Clean residual mean=-0.000002 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.188108 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.188108 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.134 mas, bmaj=10.03 mas, bpa=47.1 degrees
! Estimated noise=0.489785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00690895 Jy
! Component: 100  -  total flux cleaned = 0.0110319 Jy
! Component: 150  -  total flux cleaned = 0.0140088 Jy
! Component: 200  -  total flux cleaned = 0.0160184 Jy
! Total flux subtracted in 200 components = 0.0160184 Jy
! Clean residual min=-0.002603 max=0.002283 Jy/beam
! Clean residual mean=0.000002 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.204126 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 41 components and 0.204126 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.521 mas, bmaj=12.14 mas, bpa=51.44 degrees
! Estimated noise=0.572567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243356 Jy
! Component: 100  -  total flux cleaned = 0.00365194 Jy
! Component: 150  -  total flux cleaned = 0.00446608 Jy
! Component: 200  -  total flux cleaned = 0.0050532 Jy
! Total flux subtracted in 200 components = 0.0050532 Jy
! Clean residual min=-0.002418 max=0.002198 Jy/beam
! Clean residual mean=0.000005 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.209179 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312182 Jy
! Component: 100  -  total flux cleaned = 0.000416255 Jy
! Component: 150  -  total flux cleaned = 0.000512753 Jy
! Component: 200  -  total flux cleaned = 0.000601132 Jy
! Total flux subtracted in 200 components = 0.000601132 Jy
! Clean residual min=-0.002301 max=0.002127 Jy/beam
! Clean residual mean=0.000007 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.20978 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 131 components and 0.20978 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.134 mas, bmaj=10.03 mas, bpa=47.1 degrees
! Estimated noise=0.489785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000189357 Jy
! Component: 100  -  total flux cleaned = -0.000112779 Jy
! Component: 150  -  total flux cleaned = 1.99909e-05 Jy
! Component: 200  -  total flux cleaned = 0.000135666 Jy
! Total flux subtracted in 200 components = 0.000135666 Jy
! Clean residual min=-0.002454 max=0.002248 Jy/beam
! Clean residual mean=0.000004 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.209916 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 155 components and 0.209916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069451Jy  sigma=1.331231
! Fit after  self-cal, rms=0.069446Jy  sigma=1.331013
wmodel /J2312+7241_S_map.mod
! wmodel: Unable to open new model file: /J2312+7241_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2312+7241_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.134 x 10.03 at 47.1 degrees (North through East)
! Clean map  min=-0.0023398  max=0.15697 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2312+7241_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.156974 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000552947 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05676 1.05676 2.11352 4.22705 8.45409 16.9082 33.8164 67.6327
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.156 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  283.886 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2312+7241_S_dfm.log closed on Thu May 19 18:58:47 2016