! Started logfile: /scr/pima/bg219e_uvs/J2258-2758_X_dfm.log on Thu May 19 18:58:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2258-2758_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2258-2758_X_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.884921 visibilities/baseline/integration-bin.
! Found source: J2258-2758
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 2676 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2258-2758_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.135196Jy  sigma=21.471427
! Fit after  self-cal, rms=0.913689Jy  sigma=9.434513
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.78 mas, bmaj=3.654 mas, bpa=12.38 degrees
! Estimated noise=2.06553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.41603 Jy
! Component: 100  -  total flux cleaned = 1.73272 Jy
! Total flux subtracted in 100 components = 1.73272 Jy
! Clean residual min=-0.049281 max=0.136125 Jy/beam
! Clean residual mean=-0.000153 rms=0.018234 Jy/beam
! Combined flux in latest and established models = 1.73272 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.73272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.276098Jy  sigma=2.803485
! Fit after  self-cal, rms=0.276077Jy  sigma=2.803369
! Inverting map 
! Added new window around map position (10, -20.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129619 Jy
! Component: 100  -  total flux cleaned = 0.205214 Jy
! Total flux subtracted in 100 components = 0.205214 Jy
! Clean residual min=-0.031500 max=0.072860 Jy/beam
! Clean residual mean=-0.000064 rms=0.010017 Jy/beam
! Combined flux in latest and established models = 1.93794 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 31 components and 1.93794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.168788Jy  sigma=1.669609
! Fit after  self-cal, rms=0.165413Jy  sigma=1.636710
! Inverting map 
! Added new window around map position (-10.2, 21).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0618821 Jy
! Component: 100  -  total flux cleaned = 0.0975632 Jy
! Total flux subtracted in 100 components = 0.0975632 Jy
! Clean residual min=-0.027959 max=0.032828 Jy/beam
! Clean residual mean=-0.000025 rms=0.006491 Jy/beam
! Combined flux in latest and established models = 2.0355 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 57 components and 2.0355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.127691Jy  sigma=1.230254
! Fit after  self-cal, rms=0.127206Jy  sigma=1.221887
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9646 mas, bmaj=3.966 mas, bpa=11.64 degrees
! Estimated noise=1.58061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0408208 Jy
! Component: 100  -  total flux cleaned = 0.0640339 Jy
! Component: 150  -  total flux cleaned = 0.0794037 Jy
! Component: 200  -  total flux cleaned = 0.0899216 Jy
! Total flux subtracted in 200 components = 0.0899216 Jy
! Clean residual min=-0.022373 max=0.030978 Jy/beam
! Clean residual mean=-0.000016 rms=0.005687 Jy/beam
! Combined flux in latest and established models = 2.12542 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 89 components and 2.12542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113241Jy  sigma=1.057032
! Fit after  self-cal, rms=0.113092Jy  sigma=1.055302
! Inverting map 
! Added new window around map position (-3.4, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027881 Jy
! Component: 100  -  total flux cleaned = 0.0419441 Jy
! Component: 150  -  total flux cleaned = 0.0517805 Jy
! Component: 200  -  total flux cleaned = 0.0565592 Jy
! Total flux subtracted in 200 components = 0.0565592 Jy
! Clean residual min=-0.016737 max=0.013721 Jy/beam
! Clean residual mean=-0.000026 rms=0.003884 Jy/beam
! Combined flux in latest and established models = 2.18198 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 131 components and 2.18198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105363Jy  sigma=0.979055
! Fit after  self-cal, rms=0.104694Jy  sigma=0.971396
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9646 x 3.966 at 11.64 degrees (North through East)
! Clean map  min=-0.016879  max=1.7632 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.02     NL        1.02     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.00     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        0.99     
!   LA        1.00     NL        0.99     OV        1.00     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.99     
!   LA        1.02     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.01     NL        1.00     OV        1.02     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.02     NL        1.01     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.01     KP        1.00     
!   LA        1.01     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00     KP        0.99     
!   LA        1.01     NL        1.03     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.02     NL        1.01     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.01     
!   LA        0.99     NL        1.01     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.00     
!   LA        1.02     NL        1.00     OV        1.01     PT        0.99     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.104694Jy  sigma=0.971396
! Fit after  self-cal, rms=0.101870Jy  sigma=0.918474
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=3.973 mas, bpa=11.68 degrees
! Estimated noise=1.57962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450466 Jy
! Component: 100  -  total flux cleaned = 0.00549669 Jy
! Component: 150  -  total flux cleaned = 0.00568611 Jy
! Component: 200  -  total flux cleaned = 0.00584689 Jy
! Total flux subtracted in 200 components = 0.00584689 Jy
! Clean residual min=-0.011618 max=0.010132 Jy/beam
! Clean residual mean=-0.000013 rms=0.002720 Jy/beam
! Combined flux in latest and established models = 2.18783 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 163 components and 2.18783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100625Jy  sigma=0.909439
! Fit after  self-cal, rms=0.100559Jy  sigma=0.908757
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100559Jy  sigma=0.908757
! Fit after  self-cal, rms=0.100380Jy  sigma=0.907085
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9643 mas, bmaj=3.976 mas, bpa=11.69 degrees
! Estimated noise=1.57782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00226239 Jy
! Component: 100  -  total flux cleaned = -0.0026075 Jy
! Component: 150  -  total flux cleaned = -0.00288299 Jy
! Component: 200  -  total flux cleaned = -0.00275979 Jy
! Total flux subtracted in 200 components = -0.00275979 Jy
! Clean residual min=-0.010813 max=0.009636 Jy/beam
! Clean residual mean=-0.000014 rms=0.002554 Jy/beam
! Combined flux in latest and established models = 2.18507 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 179 components and 2.18507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099711Jy  sigma=0.902897
! Fit after  self-cal, rms=0.099692Jy  sigma=0.902511
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111074 Jy
! Component: 100  -  total flux cleaned = 0.00147001 Jy
! Component: 150  -  total flux cleaned = 0.00158479 Jy
! Component: 200  -  total flux cleaned = 0.00169048 Jy
! Total flux subtracted in 200 components = 0.00169048 Jy
! Clean residual min=-0.010307 max=0.009489 Jy/beam
! Clean residual mean=-0.000014 rms=0.002476 Jy/beam
! Combined flux in latest and established models = 2.18676 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 186 components and 2.18676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099426Jy  sigma=0.900089
! Fit after  self-cal, rms=0.099420Jy  sigma=0.899910
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099420Jy  sigma=0.899910
! Fit after  self-cal, rms=0.099310Jy  sigma=0.898353
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9644 mas, bmaj=3.98 mas, bpa=11.71 degrees
! Estimated noise=1.57616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00356893 Jy
! Component: 100  -  total flux cleaned = -0.00421788 Jy
! Component: 150  -  total flux cleaned = -0.00443018 Jy
! Component: 200  -  total flux cleaned = -0.00423612 Jy
! Total flux subtracted in 200 components = -0.00423612 Jy
! Clean residual min=-0.009589 max=0.009007 Jy/beam
! Clean residual mean=-0.000015 rms=0.002360 Jy/beam
! Combined flux in latest and established models = 2.18253 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 197 components and 2.18253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098826Jy  sigma=0.896135
! Fit after  self-cal, rms=0.098816Jy  sigma=0.895926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.18257e-05 Jy
! Component: 100  -  total flux cleaned = 8.37121e-05 Jy
! Component: 150  -  total flux cleaned = 8.64687e-05 Jy
! Component: 200  -  total flux cleaned = -2.1126e-06 Jy
! Total flux subtracted in 200 components = -2.1126e-06 Jy
! Clean residual min=-0.009488 max=0.008910 Jy/beam
! Clean residual mean=-0.000015 rms=0.002313 Jy/beam
! Combined flux in latest and established models = 2.18252 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 203 components and 2.18252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098639Jy  sigma=0.894421
! Fit after  self-cal, rms=0.098641Jy  sigma=0.894286
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098641Jy  sigma=0.894286
! Fit after  self-cal, rms=0.098629Jy  sigma=0.893078
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=5.691 mas, bpa=1.566 degrees
! Estimated noise=1.98188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00452679 Jy
! Component: 100  -  total flux cleaned = -0.00526314 Jy
! Component: 150  -  total flux cleaned = -0.00527531 Jy
! Component: 200  -  total flux cleaned = -0.00516912 Jy
! Total flux subtracted in 200 components = -0.00516912 Jy
! Clean residual min=-0.009795 max=0.009933 Jy/beam
! Clean residual mean=-0.000027 rms=0.002977 Jy/beam
! Combined flux in latest and established models = 2.17735 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 220 components and 2.17735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098356Jy  sigma=0.894010
! Fit after  self-cal, rms=0.098346Jy  sigma=0.893870
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000492338 Jy
! Component: 100  -  total flux cleaned = 0.000688815 Jy
! Component: 150  -  total flux cleaned = 0.000878993 Jy
! Component: 200  -  total flux cleaned = 0.00114813 Jy
! Total flux subtracted in 200 components = 0.00114813 Jy
! Clean residual min=-0.009426 max=0.009646 Jy/beam
! Clean residual mean=-0.000026 rms=0.002877 Jy/beam
! Combined flux in latest and established models = 2.1785 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 226 components and 2.1785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098282Jy  sigma=0.893558
! Fit after  self-cal, rms=0.098280Jy  sigma=0.893502
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9646 mas, bmaj=3.983 mas, bpa=11.72 degrees
! Estimated noise=1.5745 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9646 x 3.983 at 11.72 degrees (North through East)
! Clean map  min=-0.0090564  max=1.764 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098280Jy  sigma=0.893502
! Fit after  self-cal, rms=0.076757Jy  sigma=0.668269
! Inverting map and beam 
! Estimated beam: bmin=0.9654 mas, bmaj=3.984 mas, bpa=11.7 degrees
! Estimated noise=1.57476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00162267 Jy
! Component: 100  -  total flux cleaned = -0.00283757 Jy
! Component: 150  -  total flux cleaned = -0.00353637 Jy
! Component: 200  -  total flux cleaned = -0.00435519 Jy
! Total flux subtracted in 200 components = -0.00435519 Jy
! Clean residual min=-0.009387 max=0.007247 Jy/beam
! Clean residual mean=-0.000011 rms=0.002056 Jy/beam
! Combined flux in latest and established models = 2.17415 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 241 components and 2.17415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076329Jy  sigma=0.664158
! Fit after  self-cal, rms=0.076329Jy  sigma=0.663813
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173815 Jy
! Component: 100  -  total flux cleaned = -0.000912278 Jy
! Component: 150  -  total flux cleaned = -0.00149653 Jy
! Component: 200  -  total flux cleaned = -0.00172721 Jy
! Total flux subtracted in 200 components = -0.00172721 Jy
! Clean residual min=-0.009176 max=0.007107 Jy/beam
! Clean residual mean=-0.000010 rms=0.002020 Jy/beam
! Combined flux in latest and established models = 2.17242 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 252 components and 2.17242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076113Jy  sigma=0.661914
! Fit after  self-cal, rms=0.076121Jy  sigma=0.661681
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076121Jy  sigma=0.661681
! Fit after  self-cal, rms=0.076067Jy  sigma=0.660881
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7797 mas, bmaj=3.675 mas, bpa=12.46 degrees
! Estimated noise=2.06255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.41392 Jy
! Component: 100  -  total flux cleaned = 1.73125 Jy
! Component: 150  -  total flux cleaned = 1.85538 Jy
! Component: 200  -  total flux cleaned = 1.9276 Jy
! Total flux subtracted in 200 components = 1.9276 Jy
! Clean residual min=-0.024337 max=0.037867 Jy/beam
! Clean residual mean=-0.000053 rms=0.007800 Jy/beam
! Combined flux in latest and established models = 1.9276 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 1.9276 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9657 mas, bmaj=3.986 mas, bpa=11.71 degrees
! Estimated noise=1.5749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0704172 Jy
! Component: 100  -  total flux cleaned = 0.112385 Jy
! Component: 150  -  total flux cleaned = 0.141183 Jy
! Component: 200  -  total flux cleaned = 0.161989 Jy
! Total flux subtracted in 200 components = 0.161989 Jy
! Clean residual min=-0.013313 max=0.015405 Jy/beam
! Clean residual mean=-0.000049 rms=0.004029 Jy/beam
! Combined flux in latest and established models = 2.08959 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 85 components and 2.08959 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.197 mas, bmaj=5.694 mas, bpa=1.552 degrees
! Estimated noise=1.97933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237851 Jy
! Component: 100  -  total flux cleaned = 0.0389777 Jy
! Component: 150  -  total flux cleaned = 0.0496941 Jy
! Component: 200  -  total flux cleaned = 0.0575828 Jy
! Total flux subtracted in 200 components = 0.0575828 Jy
! Clean residual min=-0.010412 max=0.009834 Jy/beam
! Clean residual mean=-0.000044 rms=0.003346 Jy/beam
! Combined flux in latest and established models = 2.14717 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536952 Jy
! Component: 100  -  total flux cleaned = 0.00745091 Jy
! Component: 150  -  total flux cleaned = 0.00916123 Jy
! Component: 200  -  total flux cleaned = 0.0107328 Jy
! Total flux subtracted in 200 components = 0.0107328 Jy
! Clean residual min=-0.009247 max=0.009069 Jy/beam
! Clean residual mean=-0.000034 rms=0.002916 Jy/beam
! Combined flux in latest and established models = 2.1579 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 185 components and 2.1579 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9657 mas, bmaj=3.986 mas, bpa=11.71 degrees
! Estimated noise=1.5749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00116605 Jy
! Component: 100  -  total flux cleaned = -0.000538577 Jy
! Component: 150  -  total flux cleaned = -0.000161239 Jy
! Component: 200  -  total flux cleaned = 0.000358504 Jy
! Total flux subtracted in 200 components = 0.000358504 Jy
! Clean residual min=-0.010085 max=0.008438 Jy/beam
! Clean residual mean=-0.000016 rms=0.002340 Jy/beam
! Combined flux in latest and established models = 2.15826 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 203 components and 2.15826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077782Jy  sigma=0.684274
! Fit after  self-cal, rms=0.077693Jy  sigma=0.682681
wmodel /J2258-2758_X_map.mod
! wmodel: Unable to open new model file: /J2258-2758_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2258-2758_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9657 x 3.986 at 11.71 degrees (North through East)
! Clean map  min=-0.0093378  max=1.7798 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2258-2758_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.77985 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00231662 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.390475 0.390475 0.780951 1.5619 3.1238 6.24761 12.4952 24.9904 49.9809 99.9617
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0069 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.779 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  768.294 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2258-2758_X_dfm.log closed on Thu May 19 18:58:43 2016