! Started logfile: /scr/pima/bg219e_uvs/J2258-2758_S_dfm.log on Thu May 19 18:58:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J2258-2758_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2258-2758_S_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.884921 visibilities/baseline/integration-bin.
! Found source: J2258-2758
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 892 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2258-2758_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.811245Jy  sigma=19.229607
! Fit after  self-cal, rms=0.527014Jy  sigma=5.634297
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.139 mas, bmaj=13.63 mas, bpa=11.3 degrees
! Estimated noise=3.0287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06516 Jy
! Component: 100  -  total flux cleaned = 1.34242 Jy
! Total flux subtracted in 100 components = 1.34242 Jy
! Clean residual min=-0.058141 max=0.135967 Jy/beam
! Clean residual mean=-0.000059 rms=0.021110 Jy/beam
! Combined flux in latest and established models = 1.34242 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 1.34242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274789Jy  sigma=2.959693
! Fit after  self-cal, rms=0.274371Jy  sigma=2.955849
! Inverting map 
! Added new window around map position (-38.5, 77.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149199 Jy
! Component: 100  -  total flux cleaned = 0.236975 Jy
! Total flux subtracted in 100 components = 0.236975 Jy
! Clean residual min=-0.032319 max=0.061860 Jy/beam
! Clean residual mean=-0.000005 rms=0.009576 Jy/beam
! Combined flux in latest and established models = 1.57939 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 1.57939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137186Jy  sigma=1.466364
! Fit after  self-cal, rms=0.135650Jy  sigma=1.449039
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.668 mas, bmaj=15.1 mas, bpa=11.02 degrees
! Estimated noise=2.51953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38, -77.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0734465 Jy
! Component: 100  -  total flux cleaned = 0.109399 Jy
! Component: 150  -  total flux cleaned = 0.127325 Jy
! Component: 200  -  total flux cleaned = 0.13003 Jy
! Total flux subtracted in 200 components = 0.13003 Jy
! Clean residual min=-0.018613 max=0.023299 Jy/beam
! Clean residual mean=0.000021 rms=0.004957 Jy/beam
! Combined flux in latest and established models = 1.70942 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 65 components and 1.70942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092042Jy  sigma=0.961399
! Fit after  self-cal, rms=0.091564Jy  sigma=0.955950
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.668 x 15.1 at 11.02 degrees (North through East)
! Clean map  min=-0.018279  max=1.4004 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.04     KP        1.00     
!   LA        1.02     NL        0.99     OV        1.00     PT        1.01     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        1.00     
!   LA        1.01     NL        1.02     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.98     
!   LA        1.02     NL        0.98     OV        0.97     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        0.97     
!   LA        1.01     NL        0.99     OV        0.99     PT        0.99     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.091564Jy  sigma=0.955950
! Fit after  self-cal, rms=0.086856Jy  sigma=0.893633
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=15.13 mas, bpa=11.17 degrees
! Estimated noise=2.50757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180849 Jy
! Component: 100  -  total flux cleaned = -0.000305424 Jy
! Component: 150  -  total flux cleaned = 0.000692187 Jy
! Component: 200  -  total flux cleaned = 0.0018918 Jy
! Total flux subtracted in 200 components = 0.0018918 Jy
! Clean residual min=-0.013224 max=0.019075 Jy/beam
! Clean residual mean=0.000001 rms=0.003762 Jy/beam
! Combined flux in latest and established models = 1.71131 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 1.71131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083787Jy  sigma=0.862443
! Fit after  self-cal, rms=0.083666Jy  sigma=0.860817
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083666Jy  sigma=0.860817
! Fit after  self-cal, rms=0.083482Jy  sigma=0.859172
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=15.14 mas, bpa=11.2 degrees
! Estimated noise=2.50592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00271843 Jy
! Component: 100  -  total flux cleaned = -0.00134871 Jy
! Component: 150  -  total flux cleaned = -0.000154406 Jy
! Component: 200  -  total flux cleaned = 0.000933 Jy
! Total flux subtracted in 200 components = 0.000933 Jy
! Clean residual min=-0.011871 max=0.017788 Jy/beam
! Clean residual mean=0.000002 rms=0.003472 Jy/beam
! Combined flux in latest and established models = 1.71225 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 1.71225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081891Jy  sigma=0.843391
! Fit after  self-cal, rms=0.081848Jy  sigma=0.842580
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.5, -15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157564 Jy
! Component: 100  -  total flux cleaned = 0.0229041 Jy
! Component: 150  -  total flux cleaned = 0.02711 Jy
! Component: 200  -  total flux cleaned = 0.0296658 Jy
! Total flux subtracted in 200 components = 0.0296658 Jy
! Clean residual min=-0.009909 max=0.009672 Jy/beam
! Clean residual mean=0.000034 rms=0.002606 Jy/beam
! Combined flux in latest and established models = 1.74191 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 133 components and 1.74191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078445Jy  sigma=0.806709
! Fit after  self-cal, rms=0.078279Jy  sigma=0.805486
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078279Jy  sigma=0.805486
! Fit after  self-cal, rms=0.077989Jy  sigma=0.802819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.661 mas, bmaj=15.16 mas, bpa=11.21 degrees
! Estimated noise=2.50376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000520649 Jy
! Component: 100  -  total flux cleaned = 0.000877616 Jy
! Component: 150  -  total flux cleaned = 0.00135719 Jy
! Component: 200  -  total flux cleaned = 0.00165638 Jy
! Total flux subtracted in 200 components = 0.00165638 Jy
! Clean residual min=-0.009567 max=0.009465 Jy/beam
! Clean residual mean=0.000028 rms=0.002387 Jy/beam
! Combined flux in latest and established models = 1.74357 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 149 components and 1.74357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077171Jy  sigma=0.795622
! Fit after  self-cal, rms=0.077154Jy  sigma=0.795399
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000365937 Jy
! Component: 100  -  total flux cleaned = 0.000169448 Jy
! Component: 150  -  total flux cleaned = 0.000296715 Jy
! Component: 200  -  total flux cleaned = 0.000660197 Jy
! Total flux subtracted in 200 components = 0.000660197 Jy
! Clean residual min=-0.009208 max=0.009004 Jy/beam
! Clean residual mean=0.000027 rms=0.002284 Jy/beam
! Combined flux in latest and established models = 1.74423 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 159 components and 1.74423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076717Jy  sigma=0.791611
! Fit after  self-cal, rms=0.076716Jy  sigma=0.791462
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076716Jy  sigma=0.791462
! Fit after  self-cal, rms=0.076718Jy  sigma=0.790801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.772 mas, bmaj=21.37 mas, bpa=1.053 degrees
! Estimated noise=3.06945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00044376 Jy
! Component: 100  -  total flux cleaned = 0.000911457 Jy
! Component: 150  -  total flux cleaned = 0.00152407 Jy
! Component: 200  -  total flux cleaned = 0.00161841 Jy
! Total flux subtracted in 200 components = 0.00161841 Jy
! Clean residual min=-0.010144 max=0.008325 Jy/beam
! Clean residual mean=0.000039 rms=0.002558 Jy/beam
! Combined flux in latest and established models = 1.74585 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 183 components and 1.74585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076390Jy  sigma=0.789668
! Fit after  self-cal, rms=0.076394Jy  sigma=0.789266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105687 Jy
! Component: 100  -  total flux cleaned = -0.000210381 Jy
! Component: 150  -  total flux cleaned = -4.56201e-05 Jy
! Component: 200  -  total flux cleaned = 0.000265256 Jy
! Total flux subtracted in 200 components = 0.000265256 Jy
! Clean residual min=-0.009656 max=0.008124 Jy/beam
! Clean residual mean=0.000040 rms=0.002502 Jy/beam
! Combined flux in latest and established models = 1.74611 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 200 components and 1.74611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076223Jy  sigma=0.788304
! Fit after  self-cal, rms=0.076229Jy  sigma=0.788013
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.662 mas, bmaj=15.17 mas, bpa=11.22 degrees
! Estimated noise=2.5024 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.662 x 15.17 at 11.22 degrees (North through East)
! Clean map  min=-0.0080522  max=1.3865 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076229Jy  sigma=0.788013
! Fit after  self-cal, rms=0.071917Jy  sigma=0.727826
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=15.17 mas, bpa=11.21 degrees
! Estimated noise=2.50221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00254646 Jy
! Component: 100  -  total flux cleaned = -0.00254864 Jy
! Component: 150  -  total flux cleaned = -0.00265657 Jy
! Component: 200  -  total flux cleaned = -0.00275673 Jy
! Total flux subtracted in 200 components = -0.00275673 Jy
! Clean residual min=-0.007986 max=0.008124 Jy/beam
! Clean residual mean=0.000027 rms=0.002079 Jy/beam
! Combined flux in latest and established models = 1.74336 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 221 components and 1.74336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071591Jy  sigma=0.724683
! Fit after  self-cal, rms=0.071589Jy  sigma=0.724548
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000371406 Jy
! Component: 100  -  total flux cleaned = -0.00055997 Jy
! Component: 150  -  total flux cleaned = -0.000470555 Jy
! Component: 200  -  total flux cleaned = -0.000472656 Jy
! Total flux subtracted in 200 components = -0.000472656 Jy
! Clean residual min=-0.007786 max=0.007949 Jy/beam
! Clean residual mean=0.000026 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 1.74288 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 235 components and 1.74288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071362Jy  sigma=0.722385
! Fit after  self-cal, rms=0.071371Jy  sigma=0.722280
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071371Jy  sigma=0.722280
! Fit after  self-cal, rms=0.071374Jy  sigma=0.722046
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=13.7 mas, bpa=11.53 degrees
! Estimated noise=3.02025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06184 Jy
! Component: 100  -  total flux cleaned = 1.3349 Jy
! Component: 150  -  total flux cleaned = 1.47968 Jy
! Component: 200  -  total flux cleaned = 1.56513 Jy
! Total flux subtracted in 200 components = 1.56513 Jy
! Clean residual min=-0.027135 max=0.044681 Jy/beam
! Clean residual mean=-0.000007 rms=0.008245 Jy/beam
! Combined flux in latest and established models = 1.56513 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 1.56513 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=15.18 mas, bpa=11.22 degrees
! Estimated noise=2.50128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0660167 Jy
! Component: 100  -  total flux cleaned = 0.0998145 Jy
! Component: 150  -  total flux cleaned = 0.121717 Jy
! Component: 200  -  total flux cleaned = 0.137496 Jy
! Total flux subtracted in 200 components = 0.137496 Jy
! Clean residual min=-0.016071 max=0.016258 Jy/beam
! Clean residual mean=0.000029 rms=0.003684 Jy/beam
! Combined flux in latest and established models = 1.70262 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 66 components and 1.70262 Jy
! Inverting map 
! Added new window around map position (-11, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138856 Jy
! Component: 100  -  total flux cleaned = 0.0175718 Jy
! Component: 150  -  total flux cleaned = 0.0204048 Jy
! Component: 200  -  total flux cleaned = 0.0229134 Jy
! Total flux subtracted in 200 components = 0.0229134 Jy
! Clean residual min=-0.012489 max=0.010866 Jy/beam
! Clean residual mean=0.000033 rms=0.002816 Jy/beam
! Combined flux in latest and established models = 1.72554 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 95 components and 1.72554 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.776 mas, bmaj=21.39 mas, bpa=1.051 degrees
! Estimated noise=3.06628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00799828 Jy
! Component: 100  -  total flux cleaned = 0.0100978 Jy
! Component: 150  -  total flux cleaned = 0.0118462 Jy
! Component: 200  -  total flux cleaned = 0.0134968 Jy
! Total flux subtracted in 200 components = 0.0134968 Jy
! Clean residual min=-0.009425 max=0.008017 Jy/beam
! Clean residual mean=0.000062 rms=0.002474 Jy/beam
! Combined flux in latest and established models = 1.73903 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000858724 Jy
! Component: 100  -  total flux cleaned = 0.00138098 Jy
! Component: 150  -  total flux cleaned = 0.0018477 Jy
! Component: 200  -  total flux cleaned = 0.00195843 Jy
! Total flux subtracted in 200 components = 0.00195843 Jy
! Clean residual min=-0.008218 max=0.008091 Jy/beam
! Clean residual mean=0.000056 rms=0.002303 Jy/beam
! Combined flux in latest and established models = 1.74099 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 146 components and 1.74099 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=15.18 mas, bpa=11.22 degrees
! Estimated noise=2.50128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000880855 Jy
! Component: 100  -  total flux cleaned = -0.0006827 Jy
! Component: 150  -  total flux cleaned = -0.000516971 Jy
! Component: 200  -  total flux cleaned = -0.000356815 Jy
! Total flux subtracted in 200 components = -0.000356815 Jy
! Clean residual min=-0.009225 max=0.009043 Jy/beam
! Clean residual mean=0.000029 rms=0.002279 Jy/beam
! Combined flux in latest and established models = 1.74063 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 172 components and 1.74063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072592Jy  sigma=0.737918
! Fit after  self-cal, rms=0.072654Jy  sigma=0.736640
wmodel /J2258-2758_S_map.mod
! wmodel: Unable to open new model file: /J2258-2758_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2258-2758_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.663 x 15.18 at 11.22 degrees (North through East)
! Clean map  min=-0.0086545  max=1.386 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2258-2758_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.38597 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00228764 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.495171 0.495171 0.990342 1.98068 3.96137 7.92273 15.8455 31.6909 63.3819
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0068 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.385 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  605.851 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2258-2758_S_dfm.log closed on Thu May 19 18:58:39 2016