! Started logfile: /scr/pima/bg219e_uvs/J2137+3455_S_dfm.log on Thu May 19 18:58:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J2137+3455_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2137+3455_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.75787 visibilities/baseline/integration-bin.
! Found source: J2137+3455
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2137+3455_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.041627Jy  sigma=23.289791
! Fit after  self-cal, rms=0.770694Jy  sigma=17.433141
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.133 mas, bmaj=6.478 mas, bpa=25.68 degrees
! Estimated noise=0.638369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.184218 Jy
! Component: 100  -  total flux cleaned = 0.259435 Jy
! Total flux subtracted in 100 components = 0.259435 Jy
! Clean residual min=-0.030828 max=0.076165 Jy/beam
! Clean residual mean=0.000082 rms=0.008582 Jy/beam
! Combined flux in latest and established models = 0.259435 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.259435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141244Jy  sigma=3.073671
! Fit after  self-cal, rms=0.134710Jy  sigma=2.953429
! Inverting map 
! Added new window around map position (-5.5, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0762427 Jy
! Component: 100  -  total flux cleaned = 0.110386 Jy
! Total flux subtracted in 100 components = 0.110386 Jy
! Clean residual min=-0.014794 max=0.028730 Jy/beam
! Clean residual mean=0.000026 rms=0.004144 Jy/beam
! Combined flux in latest and established models = 0.369821 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 23 components and 0.369821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086362Jy  sigma=1.861238
! Fit after  self-cal, rms=0.077006Jy  sigma=1.660467
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0288334 Jy
! Component: 100  -  total flux cleaned = 0.0340446 Jy
! Total flux subtracted in 100 components = 0.0340446 Jy
! Clean residual min=-0.008645 max=0.010430 Jy/beam
! Clean residual mean=0.000008 rms=0.001998 Jy/beam
! Combined flux in latest and established models = 0.403866 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.403866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066915Jy  sigma=1.427778
! Fit after  self-cal, rms=0.065295Jy  sigma=1.395917
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578073 Jy
! Component: 100  -  total flux cleaned = 0.00382994 Jy
! Total flux subtracted in 100 components = 0.00382994 Jy
! Clean residual min=-0.006200 max=0.006843 Jy/beam
! Clean residual mean=0.000006 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.407696 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.407696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063592Jy  sigma=1.355392
! Fit after  self-cal, rms=0.063234Jy  sigma=1.349082
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.843 mas, bmaj=7.097 mas, bpa=26.3 degrees
! Estimated noise=0.415339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212657 Jy
! Component: 100  -  total flux cleaned = 0.000827127 Jy
! Component: 150  -  total flux cleaned = 0.000167237 Jy
! Component: 200  -  total flux cleaned = 0.000163841 Jy
! Total flux subtracted in 200 components = 0.000163841 Jy
! Clean residual min=-0.003926 max=0.004239 Jy/beam
! Clean residual mean=0.000010 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.407859 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.407859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062382Jy  sigma=1.328342
! Fit after  self-cal, rms=0.062178Jy  sigma=1.324656
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.843 x 7.097 at 26.3 degrees (North through East)
! Clean map  min=-0.0040901  max=0.20824 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.96     KP        1.00     
!   LA        1.01     NL        0.98     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        1.00     
!   LA        1.00     NL        0.95     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.01     NL        0.96     OV        1.00     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        1.03     
!   LA        1.03     NL        1.00     OV        1.00     PT        1.02     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.062178Jy  sigma=1.324656
! Fit after  self-cal, rms=0.061323Jy  sigma=1.312941
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.855 mas, bmaj=7.088 mas, bpa=26.11 degrees
! Estimated noise=0.413557 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000890177 Jy
! Component: 100  -  total flux cleaned = -0.000399311 Jy
! Component: 150  -  total flux cleaned = 0.000288004 Jy
! Component: 200  -  total flux cleaned = 0.000819096 Jy
! Total flux subtracted in 200 components = 0.000819096 Jy
! Clean residual min=-0.003044 max=0.003363 Jy/beam
! Clean residual mean=0.000014 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.408679 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.408678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060997Jy  sigma=1.305039
! Fit after  self-cal, rms=0.060913Jy  sigma=1.303508
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060913Jy  sigma=1.303508
! Fit after  self-cal, rms=0.060528Jy  sigma=1.300012
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.857 mas, bmaj=7.089 mas, bpa=25.88 degrees
! Estimated noise=0.4128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.52656e-05 Jy
! Component: 100  -  total flux cleaned = 0.000379724 Jy
! Component: 150  -  total flux cleaned = 0.000443762 Jy
! Component: 200  -  total flux cleaned = 0.0006116 Jy
! Total flux subtracted in 200 components = 0.0006116 Jy
! Clean residual min=-0.002583 max=0.002686 Jy/beam
! Clean residual mean=0.000009 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.40929 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 66 components and 0.40929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060356Jy  sigma=1.295805
! Fit after  self-cal, rms=0.060315Jy  sigma=1.295005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017197 Jy
! Component: 100  -  total flux cleaned = 0.000403913 Jy
! Component: 150  -  total flux cleaned = 0.000638318 Jy
! Component: 200  -  total flux cleaned = 0.000763163 Jy
! Total flux subtracted in 200 components = 0.000763163 Jy
! Clean residual min=-0.002447 max=0.002460 Jy/beam
! Clean residual mean=0.000008 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.410053 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.410053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060224Jy  sigma=1.292683
! Fit after  self-cal, rms=0.060201Jy  sigma=1.292234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060201Jy  sigma=1.292234
! Fit after  self-cal, rms=0.060143Jy  sigma=1.292124
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.857 mas, bmaj=7.083 mas, bpa=25.85 degrees
! Estimated noise=0.412695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288208 Jy
! Component: 100  -  total flux cleaned = 0.000618969 Jy
! Component: 150  -  total flux cleaned = 0.000935369 Jy
! Component: 200  -  total flux cleaned = 0.0010725 Jy
! Total flux subtracted in 200 components = 0.0010725 Jy
! Clean residual min=-0.002329 max=0.002314 Jy/beam
! Clean residual mean=0.000008 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.411126 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.411126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060084Jy  sigma=1.290614
! Fit after  self-cal, rms=0.060070Jy  sigma=1.290367
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53675e-05 Jy
! Component: 100  -  total flux cleaned = 0.000161332 Jy
! Component: 150  -  total flux cleaned = 0.000250573 Jy
! Component: 200  -  total flux cleaned = 0.000303042 Jy
! Total flux subtracted in 200 components = 0.000303042 Jy
! Clean residual min=-0.002249 max=0.002226 Jy/beam
! Clean residual mean=0.000007 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.411429 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.411429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060037Jy  sigma=1.289491
! Fit after  self-cal, rms=0.060029Jy  sigma=1.289328
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060029Jy  sigma=1.289328
! Fit after  self-cal, rms=0.059990Jy  sigma=1.289244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.898 mas, bmaj=8.994 mas, bpa=0.2779 degrees
! Estimated noise=0.472135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567489 Jy
! Component: 100  -  total flux cleaned = 0.000663523 Jy
! Component: 150  -  total flux cleaned = 0.000741062 Jy
! Component: 200  -  total flux cleaned = 0.000807993 Jy
! Total flux subtracted in 200 components = 0.000807993 Jy
! Clean residual min=-0.001851 max=0.001923 Jy/beam
! Clean residual mean=0.000013 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.412237 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 91 components and 0.412237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059979Jy  sigma=1.288880
! Fit after  self-cal, rms=0.059975Jy  sigma=1.288816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.33783e-05 Jy
! Component: 100  -  total flux cleaned = 1.6571e-05 Jy
! Component: 150  -  total flux cleaned = 2.78026e-05 Jy
! Component: 200  -  total flux cleaned = 5.04233e-05 Jy
! Total flux subtracted in 200 components = 5.04233e-05 Jy
! Clean residual min=-0.001830 max=0.001895 Jy/beam
! Clean residual mean=0.000013 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.412287 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 104 components and 0.412287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059968Jy  sigma=1.288564
! Fit after  self-cal, rms=0.059966Jy  sigma=1.288518
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.856 mas, bmaj=7.077 mas, bpa=25.86 degrees
! Estimated noise=0.412666 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.856 x 7.077 at 25.86 degrees (North through East)
! Clean map  min=-0.0021202  max=0.20443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.149 mas, bmaj=6.467 mas, bpa=25.12 degrees
! Estimated noise=0.636417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.202296 Jy
! Component: 100  -  total flux cleaned = 0.294204 Jy
! Component: 150  -  total flux cleaned = 0.34249 Jy
! Component: 200  -  total flux cleaned = 0.368904 Jy
! Total flux subtracted in 200 components = 0.368904 Jy
! Clean residual min=-0.006244 max=0.012838 Jy/beam
! Clean residual mean=0.000024 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.368904 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.368904 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.856 mas, bmaj=7.077 mas, bpa=25.86 degrees
! Estimated noise=0.412666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167973 Jy
! Component: 100  -  total flux cleaned = 0.0259007 Jy
! Component: 150  -  total flux cleaned = 0.031788 Jy
! Component: 200  -  total flux cleaned = 0.0357502 Jy
! Total flux subtracted in 200 components = 0.0357502 Jy
! Clean residual min=-0.002988 max=0.002891 Jy/beam
! Clean residual mean=0.000010 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.404654 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 42 components and 0.404654 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.898 mas, bmaj=8.994 mas, bpa=0.2779 degrees
! Estimated noise=0.472135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352459 Jy
! Component: 100  -  total flux cleaned = 0.00544633 Jy
! Component: 150  -  total flux cleaned = 0.00660822 Jy
! Component: 200  -  total flux cleaned = 0.00732746 Jy
! Total flux subtracted in 200 components = 0.00732746 Jy
! Clean residual min=-0.001905 max=0.001974 Jy/beam
! Clean residual mean=0.000013 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.411981 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180523 Jy
! Component: 100  -  total flux cleaned = 0.000308935 Jy
! Component: 150  -  total flux cleaned = 0.000388254 Jy
! Component: 200  -  total flux cleaned = 0.000445505 Jy
! Total flux subtracted in 200 components = 0.000445505 Jy
! Clean residual min=-0.001902 max=0.001936 Jy/beam
! Clean residual mean=0.000013 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.412427 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 88 components and 0.412427 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.856 mas, bmaj=7.077 mas, bpa=25.86 degrees
! Estimated noise=0.412666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0642e-05 Jy
! Component: 100  -  total flux cleaned = -0.000153625 Jy
! Component: 150  -  total flux cleaned = -0.000116081 Jy
! Component: 200  -  total flux cleaned = -8.28122e-05 Jy
! Total flux subtracted in 200 components = -8.28122e-05 Jy
! Clean residual min=-0.002615 max=0.002193 Jy/beam
! Clean residual mean=0.000007 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.412344 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.412344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059995Jy  sigma=1.288995
! Fit after  self-cal, rms=0.059938Jy  sigma=1.288018
wmodel /J2137+3455_S_map.mod
! wmodel: Unable to open new model file: /J2137+3455_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2137+3455_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.856 x 7.077 at 25.86 degrees (North through East)
! Clean map  min=-0.002267  max=0.20282 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2137+3455_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.202822 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00054986 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.813314 0.813314 1.62663 3.25326 6.50652 13.013 26.0261 52.0521
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.202 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  368.861 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2137+3455_S_dfm.log closed on Thu May 19 18:58:07 2016