! Started logfile: /scr/pima/bg219e_uvs/J2116+0225_S_dfm.log on Thu May 19 18:57:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J2116+0225_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2116+0225_S_uva.fits
! AN table 1: 61 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.546838 visibilities/baseline/integration-bin.
! Found source: J2116+0225
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2116+0225_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006666Jy  sigma=23.261100
! Fit after  self-cal, rms=0.950276Jy  sigma=22.060171
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.558 mas, bmaj=14.28 mas, bpa=-6.457 degrees
! Estimated noise=0.777145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0381343 Jy
! Component: 100  -  total flux cleaned = 0.0484321 Jy
! Total flux subtracted in 100 components = 0.0484321 Jy
! Clean residual min=-0.004911 max=0.005501 Jy/beam
! Clean residual mean=0.000022 rms=0.001483 Jy/beam
! Combined flux in latest and established models = 0.0484321 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0484321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059761Jy  sigma=1.350707
! Fit after  self-cal, rms=0.058172Jy  sigma=1.314697
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.562 mas, bmaj=16.14 mas, bpa=-5.848 degrees
! Estimated noise=0.557575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00933516 Jy
! Component: 100  -  total flux cleaned = 0.0147455 Jy
! Component: 150  -  total flux cleaned = 0.0185456 Jy
! Component: 200  -  total flux cleaned = 0.0213584 Jy
! Total flux subtracted in 200 components = 0.0213584 Jy
! Clean residual min=-0.004025 max=0.005003 Jy/beam
! Clean residual mean=0.000007 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.0697905 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 89 components and 0.0697905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056609Jy  sigma=1.273498
! Fit after  self-cal, rms=0.056432Jy  sigma=1.270039
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.562 x 16.14 at -5.848 degrees (North through East)
! Clean map  min=-0.0041621  max=0.053734 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.14     HN        1.00*    KP        1.00     
!   LA        0.87     NL        1.11     OV        1.09     PT        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00*    KP        0.96     
!   LA        1.03     NL        1.05     OV        1.00     PT        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.056432Jy  sigma=1.270039
! Fit after  self-cal, rms=0.056921Jy  sigma=1.266649
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.67 mas, bmaj=16.19 mas, bpa=-5.616 degrees
! Estimated noise=0.558378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204307 Jy
! Component: 100  -  total flux cleaned = 0.00333177 Jy
! Component: 150  -  total flux cleaned = 0.0041982 Jy
! Component: 200  -  total flux cleaned = 0.0044268 Jy
! Total flux subtracted in 200 components = 0.0044268 Jy
! Clean residual min=-0.003774 max=0.004817 Jy/beam
! Clean residual mean=-0.000003 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 0.0742173 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 104 components and 0.0742173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056842Jy  sigma=1.264475
! Fit after  self-cal, rms=0.056929Jy  sigma=1.263402
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056929Jy  sigma=1.263402
! Fit after  self-cal, rms=0.059486Jy  sigma=1.258684
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.736 mas, bmaj=16.33 mas, bpa=-5.478 degrees
! Estimated noise=0.571216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145187 Jy
! Component: 100  -  total flux cleaned = 9.39488e-05 Jy
! Component: 150  -  total flux cleaned = 9.39865e-05 Jy
! Component: 200  -  total flux cleaned = 9.35485e-05 Jy
! Total flux subtracted in 200 components = 9.35485e-05 Jy
! Clean residual min=-0.003624 max=0.004644 Jy/beam
! Clean residual mean=-0.000003 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 0.0743108 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 0.0743108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059453Jy  sigma=1.258434
! Fit after  self-cal, rms=0.059604Jy  sigma=1.257641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.47199e-05 Jy
! Component: 100  -  total flux cleaned = -8.63971e-05 Jy
! Component: 150  -  total flux cleaned = -7.00445e-05 Jy
! Component: 200  -  total flux cleaned = -3.84606e-05 Jy
! Total flux subtracted in 200 components = -3.84606e-05 Jy
! Clean residual min=-0.003584 max=0.004600 Jy/beam
! Clean residual mean=-0.000002 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.0742724 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.0742724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059586Jy  sigma=1.257532
! Fit after  self-cal, rms=0.059595Jy  sigma=1.257465
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059595Jy  sigma=1.257465
! Fit after  self-cal, rms=0.060553Jy  sigma=1.256766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.722 mas, bmaj=16.35 mas, bpa=-5.464 degrees
! Estimated noise=0.576422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491826 Jy
! Component: 100  -  total flux cleaned = 0.000656513 Jy
! Component: 150  -  total flux cleaned = 0.000731979 Jy
! Component: 200  -  total flux cleaned = 0.000759493 Jy
! Total flux subtracted in 200 components = 0.000759493 Jy
! Clean residual min=-0.003510 max=0.004683 Jy/beam
! Clean residual mean=-0.000001 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.0750319 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 145 components and 0.0750319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060535Jy  sigma=1.256670
! Fit after  self-cal, rms=0.060585Jy  sigma=1.256522
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.81448e-05 Jy
! Component: 100  -  total flux cleaned = 6.24336e-05 Jy
! Component: 150  -  total flux cleaned = 0.000104407 Jy
! Component: 200  -  total flux cleaned = 0.000143581 Jy
! Total flux subtracted in 200 components = 0.000143581 Jy
! Clean residual min=-0.003479 max=0.004708 Jy/beam
! Clean residual mean=-0.000001 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.0751754 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 159 components and 0.0751754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060574Jy  sigma=1.256461
! Fit after  self-cal, rms=0.060561Jy  sigma=1.256202
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060561Jy  sigma=1.256202
! Fit after  self-cal, rms=0.061006Jy  sigma=1.256130
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.993 mas, bmaj=17.2 mas, bpa=-3.873 degrees
! Estimated noise=0.586332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000939588 Jy
! Component: 100  -  total flux cleaned = 0.00151833 Jy
! Component: 150  -  total flux cleaned = 0.00171921 Jy
! Component: 200  -  total flux cleaned = 0.00176137 Jy
! Total flux subtracted in 200 components = 0.00176137 Jy
! Clean residual min=-0.003743 max=0.005211 Jy/beam
! Clean residual mean=-0.000002 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.0769368 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 165 components and 0.0769368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060999Jy  sigma=1.256079
! Fit after  self-cal, rms=0.061018Jy  sigma=1.256006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191086 Jy
! Component: 100  -  total flux cleaned = 0.000237474 Jy
! Component: 150  -  total flux cleaned = 0.00027869 Jy
! Component: 200  -  total flux cleaned = 0.000304786 Jy
! Total flux subtracted in 200 components = 0.000304786 Jy
! Clean residual min=-0.003738 max=0.005201 Jy/beam
! Clean residual mean=-0.000002 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 0.0772416 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 172 components and 0.0772416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061014Jy  sigma=1.255985
! Fit after  self-cal, rms=0.061020Jy  sigma=1.255498
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.708 mas, bmaj=16.36 mas, bpa=-5.504 degrees
! Estimated noise=0.579771 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.708 x 16.36 at -5.504 degrees (North through East)
! Clean map  min=-0.0033211  max=0.05517 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.628 mas, bmaj=14.41 mas, bpa=-6.059 degrees
! Estimated noise=0.815848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0403976 Jy
! Component: 100  -  total flux cleaned = 0.052922 Jy
! Component: 150  -  total flux cleaned = 0.0601701 Jy
! Component: 200  -  total flux cleaned = 0.0646034 Jy
! Total flux subtracted in 200 components = 0.0646034 Jy
! Clean residual min=-0.004478 max=0.004217 Jy/beam
! Clean residual mean=0.000011 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.0646034 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.0646034 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.708 mas, bmaj=16.36 mas, bpa=-5.504 degrees
! Estimated noise=0.579771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045613 Jy
! Component: 100  -  total flux cleaned = 0.00714168 Jy
! Component: 150  -  total flux cleaned = 0.00843171 Jy
! Component: 200  -  total flux cleaned = 0.00912754 Jy
! Total flux subtracted in 200 components = 0.00912754 Jy
! Clean residual min=-0.003588 max=0.004747 Jy/beam
! Clean residual mean=0.000002 rms=0.001217 Jy/beam
! Combined flux in latest and established models = 0.0737309 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 83 components and 0.0737309 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.993 mas, bmaj=17.2 mas, bpa=-3.873 degrees
! Estimated noise=0.586332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147897 Jy
! Component: 100  -  total flux cleaned = 0.00226433 Jy
! Component: 150  -  total flux cleaned = 0.00267609 Jy
! Component: 200  -  total flux cleaned = 0.00292296 Jy
! Total flux subtracted in 200 components = 0.00292296 Jy
! Clean residual min=-0.003612 max=0.005119 Jy/beam
! Clean residual mean=-0.000002 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.0766538 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.83676e-05 Jy
! Component: 100  -  total flux cleaned = 0.000171581 Jy
! Component: 150  -  total flux cleaned = 0.000235059 Jy
! Component: 200  -  total flux cleaned = 0.00029529 Jy
! Total flux subtracted in 200 components = 0.00029529 Jy
! Clean residual min=-0.003582 max=0.005093 Jy/beam
! Clean residual mean=-0.000002 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.0769491 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 108 components and 0.0769491 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.708 mas, bmaj=16.36 mas, bpa=-5.504 degrees
! Estimated noise=0.579771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104874 Jy
! Component: 100  -  total flux cleaned = -0.000125711 Jy
! Component: 150  -  total flux cleaned = -0.000162514 Jy
! Component: 200  -  total flux cleaned = -0.000214103 Jy
! Total flux subtracted in 200 components = -0.000214103 Jy
! Clean residual min=-0.003401 max=0.004793 Jy/beam
! Clean residual mean=-0.000002 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.076735 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 120 components and 0.076735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061041Jy  sigma=1.255885
! Fit after  self-cal, rms=0.061033Jy  sigma=1.255647
wmodel /J2116+0225_S_map.mod
! wmodel: Unable to open new model file: /J2116+0225_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2116+0225_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.708 x 16.36 at -5.504 degrees (North through East)
! Clean map  min=-0.0034076  max=0.055239 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2116+0225_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0552394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00116398 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -6.3215 6.3215 12.643 25.286 50.572
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0034 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  47.457 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2116+0225_S_dfm.log closed on Thu May 19 18:57:45 2016