! Started logfile: /scr/pima/bg219e_uvs/J2109+3532_X_dfm.log on Thu May 19 18:57:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2109+3532_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2109+3532_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.798611 visibilities/baseline/integration-bin.
! Found source: J2109+3532
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 9660 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2109+3532_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.183200Jy  sigma=23.847089
! Fit after  self-cal, rms=0.392392Jy  sigma=7.950205
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.764 mas, bpa=30.52 degrees
! Estimated noise=0.677154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.482461 Jy
! Component: 100  -  total flux cleaned = 0.608134 Jy
! Total flux subtracted in 100 components = 0.608134 Jy
! Clean residual min=-0.024353 max=0.065483 Jy/beam
! Clean residual mean=0.000013 rms=0.007152 Jy/beam
! Combined flux in latest and established models = 0.608134 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.608134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.143865Jy  sigma=2.778569
! Fit after  self-cal, rms=0.142974Jy  sigma=2.763452
! Inverting map 
! Added new window around map position (-1.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068454 Jy
! Component: 100  -  total flux cleaned = 0.104115 Jy
! Total flux subtracted in 100 components = 0.104115 Jy
! Clean residual min=-0.013179 max=0.018109 Jy/beam
! Clean residual mean=-0.000018 rms=0.003791 Jy/beam
! Combined flux in latest and established models = 0.71225 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.71225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095750Jy  sigma=1.834900
! Fit after  self-cal, rms=0.094115Jy  sigma=1.800074
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250226 Jy
! Component: 100  -  total flux cleaned = 0.0419744 Jy
! Total flux subtracted in 100 components = 0.0419744 Jy
! Clean residual min=-0.009426 max=0.014101 Jy/beam
! Clean residual mean=-0.000028 rms=0.002852 Jy/beam
! Combined flux in latest and established models = 0.754224 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 30 components and 0.754224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082508Jy  sigma=1.575308
! Fit after  self-cal, rms=0.082260Jy  sigma=1.569655
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.284 mas, bmaj=1.889 mas, bpa=26.1 degrees
! Estimated noise=0.398031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213181 Jy
! Component: 100  -  total flux cleaned = 0.0356246 Jy
! Component: 150  -  total flux cleaned = 0.045793 Jy
! Component: 200  -  total flux cleaned = 0.0532898 Jy
! Total flux subtracted in 200 components = 0.0532898 Jy
! Clean residual min=-0.009883 max=0.020245 Jy/beam
! Clean residual mean=-0.000070 rms=0.003527 Jy/beam
! Combined flux in latest and established models = 0.807514 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 63 components and 0.807514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074730Jy  sigma=1.431264
! Fit after  self-cal, rms=0.074549Jy  sigma=1.427031
! Inverting map 
! Added new window around map position (-3.2, -4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202068 Jy
! Component: 100  -  total flux cleaned = 0.0319123 Jy
! Component: 150  -  total flux cleaned = 0.0405484 Jy
! Component: 200  -  total flux cleaned = 0.0475655 Jy
! Total flux subtracted in 200 components = 0.0475655 Jy
! Clean residual min=-0.007984 max=0.010927 Jy/beam
! Clean residual mean=-0.000043 rms=0.002425 Jy/beam
! Combined flux in latest and established models = 0.855079 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 114 components and 0.855079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067565Jy  sigma=1.301074
! Fit after  self-cal, rms=0.067124Jy  sigma=1.291714
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.284 x 1.889 at 26.1 degrees (North through East)
! Clean map  min=-0.0080157  max=0.63879 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        0.98     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.96     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        1.00     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.98     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.03     KP        1.01     
!   LA        1.00     NL        1.02     OV        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.96     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        1.00     
!   LA        0.99     NL        1.00     OV        0.98     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.02     KP        1.00     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        0.99     
!   LA        1.00     NL        1.00     OV        1.00     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        1.01     
!   LA        1.01     NL        1.02     OV        0.98     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.97     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.067124Jy  sigma=1.291714
! Fit after  self-cal, rms=0.064595Jy  sigma=1.248540
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.292 mas, bmaj=1.895 mas, bpa=25.99 degrees
! Estimated noise=0.396424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, -6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106988 Jy
! Component: 100  -  total flux cleaned = 0.0174038 Jy
! Component: 150  -  total flux cleaned = 0.0225601 Jy
! Component: 200  -  total flux cleaned = 0.0268548 Jy
! Total flux subtracted in 200 components = 0.0268548 Jy
! Clean residual min=-0.005364 max=0.005018 Jy/beam
! Clean residual mean=-0.000030 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.881934 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 164 components and 0.881934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062341Jy  sigma=1.204360
! Fit after  self-cal, rms=0.062224Jy  sigma=1.201928
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062224Jy  sigma=1.201928
! Fit after  self-cal, rms=0.061041Jy  sigma=1.172863
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.291 mas, bmaj=1.897 mas, bpa=26.22 degrees
! Estimated noise=0.396668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266414 Jy
! Component: 100  -  total flux cleaned = 0.00458656 Jy
! Component: 150  -  total flux cleaned = 0.00589244 Jy
! Component: 200  -  total flux cleaned = 0.00702568 Jy
! Total flux subtracted in 200 components = 0.00702568 Jy
! Clean residual min=-0.003212 max=0.003864 Jy/beam
! Clean residual mean=-0.000007 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.88896 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 193 components and 0.88896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060582Jy  sigma=1.164145
! Fit after  self-cal, rms=0.060561Jy  sigma=1.163526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 16.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372316 Jy
! Component: 100  -  total flux cleaned = 0.00552246 Jy
! Component: 150  -  total flux cleaned = 0.00687719 Jy
! Component: 200  -  total flux cleaned = 0.00777685 Jy
! Total flux subtracted in 200 components = 0.00777685 Jy
! Clean residual min=-0.002759 max=0.002757 Jy/beam
! Clean residual mean=-0.000008 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.896737 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 220 components and 0.896737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060223Jy  sigma=1.157371
! Fit after  self-cal, rms=0.060218Jy  sigma=1.157167
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060218Jy  sigma=1.157167
! Fit after  self-cal, rms=0.060187Jy  sigma=1.156438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.291 mas, bmaj=1.898 mas, bpa=26.28 degrees
! Estimated noise=0.396565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159254 Jy
! Component: 100  -  total flux cleaned = 0.00109478 Jy
! Component: 150  -  total flux cleaned = 0.00179673 Jy
! Component: 200  -  total flux cleaned = 0.00231558 Jy
! Total flux subtracted in 200 components = 0.00231558 Jy
! Clean residual min=-0.002657 max=0.002565 Jy/beam
! Clean residual mean=-0.000009 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.899052 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 235 components and 0.899052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060038Jy  sigma=1.153687
! Fit after  self-cal, rms=0.060036Jy  sigma=1.153574
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800143 Jy
! Component: 100  -  total flux cleaned = 0.00126313 Jy
! Component: 150  -  total flux cleaned = 0.00168448 Jy
! Component: 200  -  total flux cleaned = 0.00198855 Jy
! Total flux subtracted in 200 components = 0.00198855 Jy
! Clean residual min=-0.002563 max=0.002586 Jy/beam
! Clean residual mean=-0.000009 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.901041 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 252 components and 0.901041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059959Jy  sigma=1.152192
! Fit after  self-cal, rms=0.059957Jy  sigma=1.152115
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059957Jy  sigma=1.152115
! Fit after  self-cal, rms=0.059976Jy  sigma=1.151847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=2.47 mas, bpa=-27.88 degrees
! Estimated noise=0.456482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139917 Jy
! Component: 100  -  total flux cleaned = 0.00217343 Jy
! Component: 150  -  total flux cleaned = 0.00253581 Jy
! Component: 200  -  total flux cleaned = 0.00267682 Jy
! Total flux subtracted in 200 components = 0.00267682 Jy
! Clean residual min=-0.002987 max=0.002812 Jy/beam
! Clean residual mean=-0.000015 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.903718 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 280 components and 0.903717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059929Jy  sigma=1.151003
! Fit after  self-cal, rms=0.059928Jy  sigma=1.150932
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027596 Jy
! Component: 100  -  total flux cleaned = 0.000436582 Jy
! Component: 150  -  total flux cleaned = 0.000553281 Jy
! Component: 200  -  total flux cleaned = 0.000661534 Jy
! Total flux subtracted in 200 components = 0.000661534 Jy
! Clean residual min=-0.002873 max=0.002741 Jy/beam
! Clean residual mean=-0.000015 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.904379 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 296 components and 0.904379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059904Jy  sigma=1.150481
! Fit after  self-cal, rms=0.059903Jy  sigma=1.150443
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.29 mas, bmaj=1.899 mas, bpa=26.33 degrees
! Estimated noise=0.396585 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.29 x 1.899 at 26.33 degrees (North through East)
! Clean map  min=-0.0022969  max=0.63514 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059903Jy  sigma=1.150443
! Fit after  self-cal, rms=0.054994Jy  sigma=1.037985
! Inverting map and beam 
! Estimated beam: bmin=1.291 mas, bmaj=1.9 mas, bpa=26.33 degrees
! Estimated noise=0.396067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000882368 Jy
! Component: 100  -  total flux cleaned = -0.000890156 Jy
! Component: 150  -  total flux cleaned = -0.000664158 Jy
! Component: 200  -  total flux cleaned = -0.000495205 Jy
! Total flux subtracted in 200 components = -0.000495205 Jy
! Clean residual min=-0.002311 max=0.002437 Jy/beam
! Clean residual mean=-0.000008 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.903884 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 314 components and 0.903884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054929Jy  sigma=1.036674
! Fit after  self-cal, rms=0.054927Jy  sigma=1.036630
! Inverting map 
! Added new window around map position (20.6, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119871 Jy
! Component: 100  -  total flux cleaned = 0.00184398 Jy
! Component: 150  -  total flux cleaned = 0.00211596 Jy
! Component: 200  -  total flux cleaned = 0.00253748 Jy
! Total flux subtracted in 200 components = 0.00253748 Jy
! Clean residual min=-0.002017 max=0.001948 Jy/beam
! Clean residual mean=-0.000007 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.906421 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 336 components and 0.906421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054836Jy  sigma=1.034636
! Fit after  self-cal, rms=0.054831Jy  sigma=1.034555
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054831Jy  sigma=1.034555
! Fit after  self-cal, rms=0.054706Jy  sigma=1.031816
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=1.772 mas, bpa=30.71 degrees
! Estimated noise=0.67848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.48244 Jy
! Component: 100  -  total flux cleaned = 0.614364 Jy
! Component: 150  -  total flux cleaned = 0.679697 Jy
! Component: 200  -  total flux cleaned = 0.714576 Jy
! Total flux subtracted in 200 components = 0.714576 Jy
! Clean residual min=-0.010505 max=0.018481 Jy/beam
! Clean residual mean=-0.000016 rms=0.003276 Jy/beam
! Combined flux in latest and established models = 0.714577 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.714577 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.291 mas, bmaj=1.9 mas, bpa=26.39 degrees
! Estimated noise=0.395751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334467 Jy
! Component: 100  -  total flux cleaned = 0.0570994 Jy
! Component: 150  -  total flux cleaned = 0.0744975 Jy
! Component: 200  -  total flux cleaned = 0.0884983 Jy
! Total flux subtracted in 200 components = 0.0884983 Jy
! Clean residual min=-0.007087 max=0.008456 Jy/beam
! Clean residual mean=-0.000028 rms=0.002284 Jy/beam
! Combined flux in latest and established models = 0.803075 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 54 components and 0.803075 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.255 mas, bmaj=2.47 mas, bpa=-27.99 degrees
! Estimated noise=0.455255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179917 Jy
! Component: 100  -  total flux cleaned = 0.0312065 Jy
! Component: 150  -  total flux cleaned = 0.0415146 Jy
! Component: 200  -  total flux cleaned = 0.0497453 Jy
! Total flux subtracted in 200 components = 0.0497453 Jy
! Clean residual min=-0.005464 max=0.005839 Jy/beam
! Clean residual mean=-0.000023 rms=0.001925 Jy/beam
! Combined flux in latest and established models = 0.85282 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00672168 Jy
! Component: 100  -  total flux cleaned = 0.0123759 Jy
! Component: 150  -  total flux cleaned = 0.0172188 Jy
! Component: 200  -  total flux cleaned = 0.0214267 Jy
! Total flux subtracted in 200 components = 0.0214267 Jy
! Clean residual min=-0.004127 max=0.003880 Jy/beam
! Clean residual mean=-0.000015 rms=0.001266 Jy/beam
! Combined flux in latest and established models = 0.874247 Jy
! Adding 134 model components to the UV plane model.
! The established model now contains 176 components and 0.874247 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.291 mas, bmaj=1.9 mas, bpa=26.39 degrees
! Estimated noise=0.395751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418135 Jy
! Component: 100  -  total flux cleaned = 0.00758535 Jy
! Component: 150  -  total flux cleaned = 0.0101454 Jy
! Component: 200  -  total flux cleaned = 0.0121495 Jy
! Total flux subtracted in 200 components = 0.0121495 Jy
! Clean residual min=-0.003298 max=0.003035 Jy/beam
! Clean residual mean=-0.000007 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.886396 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 206 components and 0.886396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055487Jy  sigma=1.047620
! Fit after  self-cal, rms=0.055417Jy  sigma=1.046127
wmodel /J2109+3532_X_map.mod
! wmodel: Unable to open new model file: /J2109+3532_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2109+3532_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.291 x 1.9 at 26.39 degrees (North through East)
! Clean map  min=-0.0027794  max=0.63486 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2109+3532_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.63486 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000736463 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.348012 0.348012 0.696024 1.39205 2.7841 5.56819 11.1364 22.2728 44.5455 89.0911
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.634 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  862.039 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2109+3532_X_dfm.log closed on Thu May 19 18:57:34 2016