! Started logfile: /scr/pima/bg219e_uvs/J2050+3714_X_dfm.log on Thu May 19 18:56:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2050+3714_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2050+3714_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.680108 visibilities/baseline/integration-bin.
! Found source: J2050+3714
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2050+3714_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002345Jy  sigma=24.803233
! Fit after  self-cal, rms=0.960395Jy  sigma=23.784836
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.469 mas, bmaj=1.954 mas, bpa=-18.83 degrees
! Estimated noise=0.476479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310395 Jy
! Component: 100  -  total flux cleaned = 0.039003 Jy
! Total flux subtracted in 100 components = 0.039003 Jy
! Clean residual min=-0.003646 max=0.005446 Jy/beam
! Clean residual mean=-0.000003 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.039003 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.039003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060317Jy  sigma=1.385387
! Fit after  self-cal, rms=0.058522Jy  sigma=1.339732
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636154 Jy
! Component: 100  -  total flux cleaned = 0.00982967 Jy
! Total flux subtracted in 100 components = 0.00982967 Jy
! Clean residual min=-0.003135 max=0.005530 Jy/beam
! Clean residual mean=-0.000004 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.0488326 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.0488326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057733Jy  sigma=1.320208
! Fit after  self-cal, rms=0.057665Jy  sigma=1.318629
! Inverting map 
! Added new window around map position (-19.2, 6.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00484834 Jy
! Component: 100  -  total flux cleaned = 0.00748781 Jy
! Total flux subtracted in 100 components = 0.00748781 Jy
! Clean residual min=-0.002788 max=0.002872 Jy/beam
! Clean residual mean=-0.000004 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.0563204 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 33 components and 0.0563204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057269Jy  sigma=1.306916
! Fit after  self-cal, rms=0.057112Jy  sigma=1.303864
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.781 mas, bmaj=2.162 mas, bpa=-20.16 degrees
! Estimated noise=0.230464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359991 Jy
! Component: 100  -  total flux cleaned = 0.00571409 Jy
! Component: 150  -  total flux cleaned = 0.0072664 Jy
! Component: 200  -  total flux cleaned = 0.00847054 Jy
! Total flux subtracted in 200 components = 0.00847054 Jy
! Clean residual min=-0.001770 max=0.001681 Jy/beam
! Clean residual mean=-0.000008 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.064791 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 70 components and 0.064791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056863Jy  sigma=1.296793
! Fit after  self-cal, rms=0.056757Jy  sigma=1.294140
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.781 x 2.162 at -20.16 degrees (North through East)
! Clean map  min=-0.0019797  max=0.043915 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.03     HN        0.99     KP        1.03     
!   LA        0.96     NL        1.08     OV        1.01     PT        0.97     
!   SC        1.12     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        0.96     
!   LA        1.01     NL        1.06     OV        1.07     PT        0.93     
!   SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        1.04     KP        1.03     
!   LA        1.00     NL        0.98     OV        0.97     PT        0.90     
!   SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.91     KP        1.06     
!   LA        0.96     NL        1.16     OV        0.95     PT        0.89     
!   SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.03     KP        1.06     
!   LA        0.96     NL        1.03     OV        1.04     PT        0.91     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.93     HN        1.05     KP        1.02     
!   LA        0.97     NL        1.03     OV        1.10     PT        0.94     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.90     HN        0.89     KP        1.00     
!   LA        0.97     NL        0.98     OV        1.01     PT        0.91     
!   SC        0.87     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.92     KP        0.98     
!   LA        0.96     NL        1.01     OV        1.03     PT        0.93     
!   SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.92     HN        0.86     KP        0.97     
!   LA        0.97     NL        1.02     OV        0.96     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        0.89     KP        0.99     
!   LA        0.91     NL        1.02     OV        0.96     PT        0.87     
!   SC        1.06     
! 
! 
! Fit before self-cal, rms=0.056757Jy  sigma=1.294140
! Fit after  self-cal, rms=0.055417Jy  sigma=1.291425
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.781 mas, bmaj=2.159 mas, bpa=-20.39 degrees
! Estimated noise=0.226276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176179 Jy
! Component: 100  -  total flux cleaned = 0.0025148 Jy
! Component: 150  -  total flux cleaned = 0.00290264 Jy
! Component: 200  -  total flux cleaned = 0.00315582 Jy
! Total flux subtracted in 200 components = 0.00315582 Jy
! Clean residual min=-0.001436 max=0.001703 Jy/beam
! Clean residual mean=-0.000005 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0679468 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 94 components and 0.0679468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055364Jy  sigma=1.289674
! Fit after  self-cal, rms=0.055360Jy  sigma=1.288825
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055360Jy  sigma=1.288825
! Fit after  self-cal, rms=0.055184Jy  sigma=1.285982
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.782 mas, bmaj=2.139 mas, bpa=-21.15 degrees
! Estimated noise=0.224751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116338 Jy
! Component: 100  -  total flux cleaned = 0.00157774 Jy
! Component: 150  -  total flux cleaned = 0.0018233 Jy
! Component: 200  -  total flux cleaned = 0.00195196 Jy
! Total flux subtracted in 200 components = 0.00195196 Jy
! Clean residual min=-0.001264 max=0.001558 Jy/beam
! Clean residual mean=-0.000003 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0698987 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 105 components and 0.0698987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055155Jy  sigma=1.285103
! Fit after  self-cal, rms=0.055190Jy  sigma=1.284517
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-46.6, -18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146136 Jy
! Component: 100  -  total flux cleaned = 0.00198325 Jy
! Component: 150  -  total flux cleaned = 0.00226835 Jy
! Component: 200  -  total flux cleaned = 0.00248676 Jy
! Total flux subtracted in 200 components = 0.00248676 Jy
! Clean residual min=-0.001080 max=0.001181 Jy/beam
! Clean residual mean=-0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.0723855 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 128 components and 0.0723855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055148Jy  sigma=1.283388
! Fit after  self-cal, rms=0.055135Jy  sigma=1.283013
! Inverting map 
! Added new window around map position (4.2, 42.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000971547 Jy
! Component: 100  -  total flux cleaned = 0.00128169 Jy
! Component: 150  -  total flux cleaned = 0.00160992 Jy
! Component: 200  -  total flux cleaned = 0.00178438 Jy
! Total flux subtracted in 200 components = 0.00178438 Jy
! Clean residual min=-0.001038 max=0.001079 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0741699 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 140 components and 0.0741699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055104Jy  sigma=1.282271
! Fit after  self-cal, rms=0.055097Jy  sigma=1.282107
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055097Jy  sigma=1.282107
! Fit after  self-cal, rms=0.054909Jy  sigma=1.281790
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.781 mas, bmaj=2.13 mas, bpa=-21.7 degrees
! Estimated noise=0.223025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421977 Jy
! Component: 100  -  total flux cleaned = 0.000746047 Jy
! Component: 150  -  total flux cleaned = 0.000985861 Jy
! Component: 200  -  total flux cleaned = 0.00110996 Jy
! Total flux subtracted in 200 components = 0.00110996 Jy
! Clean residual min=-0.000930 max=0.000977 Jy/beam
! Clean residual mean=-0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0752799 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 150 components and 0.0752799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054891Jy  sigma=1.281367
! Fit after  self-cal, rms=0.054912Jy  sigma=1.281222
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310169 Jy
! Component: 100  -  total flux cleaned = 0.000489228 Jy
! Component: 150  -  total flux cleaned = 0.000650209 Jy
! Component: 200  -  total flux cleaned = 0.000770053 Jy
! Total flux subtracted in 200 components = 0.000770053 Jy
! Clean residual min=-0.000919 max=0.000993 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0760499 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 159 components and 0.0760499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054901Jy  sigma=1.280990
! Fit after  self-cal, rms=0.054901Jy  sigma=1.280961
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054901Jy  sigma=1.280961
! Fit after  self-cal, rms=0.054705Jy  sigma=1.280883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.414 mas, bmaj=2.575 mas, bpa=-54.2 degrees
! Estimated noise=0.239123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539145 Jy
! Component: 100  -  total flux cleaned = 0.000712861 Jy
! Component: 150  -  total flux cleaned = 0.000864958 Jy
! Component: 200  -  total flux cleaned = 0.000974521 Jy
! Total flux subtracted in 200 components = 0.000974521 Jy
! Clean residual min=-0.000905 max=0.000956 Jy/beam
! Clean residual mean=-0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0770244 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 174 components and 0.0770244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054699Jy  sigma=1.280708
! Fit after  self-cal, rms=0.054706Jy  sigma=1.280643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266523 Jy
! Component: 100  -  total flux cleaned = 0.000396674 Jy
! Component: 150  -  total flux cleaned = 0.000477056 Jy
! Component: 200  -  total flux cleaned = 0.000561069 Jy
! Total flux subtracted in 200 components = 0.000561069 Jy
! Clean residual min=-0.000864 max=0.000924 Jy/beam
! Clean residual mean=-0.000002 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0775855 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 181 components and 0.0775855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054702Jy  sigma=1.280547
! Fit after  self-cal, rms=0.054694Jy  sigma=1.280335
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=2.128 mas, bpa=-21.92 degrees
! Estimated noise=0.222136 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.779 x 2.128 at -21.92 degrees (North through East)
! Clean map  min=-0.00092543  max=0.042532 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.466 mas, bmaj=1.918 mas, bpa=-19.94 degrees
! Estimated noise=0.455472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310916 Jy
! Component: 100  -  total flux cleaned = 0.0423255 Jy
! Component: 150  -  total flux cleaned = 0.049324 Jy
! Component: 200  -  total flux cleaned = 0.05416 Jy
! Total flux subtracted in 200 components = 0.05416 Jy
! Clean residual min=-0.003073 max=0.003340 Jy/beam
! Clean residual mean=-0.000000 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.05416 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.05416 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=2.128 mas, bpa=-21.92 degrees
! Estimated noise=0.222136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481246 Jy
! Component: 100  -  total flux cleaned = 0.00825311 Jy
! Component: 150  -  total flux cleaned = 0.0109568 Jy
! Component: 200  -  total flux cleaned = 0.012795 Jy
! Total flux subtracted in 200 components = 0.012795 Jy
! Clean residual min=-0.001545 max=0.001722 Jy/beam
! Clean residual mean=-0.000003 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.066955 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 61 components and 0.066955 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.414 mas, bmaj=2.575 mas, bpa=-54.2 degrees
! Estimated noise=0.239123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240126 Jy
! Component: 100  -  total flux cleaned = 0.00412755 Jy
! Component: 150  -  total flux cleaned = 0.00549532 Jy
! Component: 200  -  total flux cleaned = 0.00650083 Jy
! Total flux subtracted in 200 components = 0.00650083 Jy
! Clean residual min=-0.001272 max=0.001283 Jy/beam
! Clean residual mean=-0.000003 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0734558 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547809 Jy
! Component: 100  -  total flux cleaned = 0.000989173 Jy
! Component: 150  -  total flux cleaned = 0.00137506 Jy
! Component: 200  -  total flux cleaned = 0.00171446 Jy
! Total flux subtracted in 200 components = 0.00171446 Jy
! Clean residual min=-0.001046 max=0.001041 Jy/beam
! Clean residual mean=-0.000002 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0751703 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 124 components and 0.0751703 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=2.128 mas, bpa=-21.92 degrees
! Estimated noise=0.222136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169178 Jy
! Component: 100  -  total flux cleaned = -2.85228e-05 Jy
! Component: 150  -  total flux cleaned = 0.000150074 Jy
! Component: 200  -  total flux cleaned = 0.000266639 Jy
! Total flux subtracted in 200 components = 0.000266639 Jy
! Clean residual min=-0.000975 max=0.000957 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.0754369 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.0754369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054713Jy  sigma=1.281057
! Fit after  self-cal, rms=0.054705Jy  sigma=1.280763
wmodel /J2050+3714_X_map.mod
! wmodel: Unable to open new model file: /J2050+3714_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2050+3714_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.779 x 2.128 at -21.92 degrees (North through East)
! Clean map  min=-0.00093286  max=0.041978 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2050+3714_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.041978 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000264252 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.88851 1.88851 3.77701 7.55403 15.1081 30.2161 60.4322
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  158.855 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2050+3714_X_dfm.log closed on Thu May 19 18:57:02 2016