! Started logfile: /scr/pima/bg219e_uvs/J2050+3619_X_dfm.log on Thu May 19 18:56:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2050+3619_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2050+3619_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.800287 visibilities/baseline/integration-bin.
! Found source: J2050+3619
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20052 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2050+3619_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.049212Jy  sigma=24.045215
! Fit after  self-cal, rms=0.732260Jy  sigma=16.591106
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9897 mas, bmaj=1.779 mas, bpa=29.3 degrees
! Estimated noise=0.494106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193748 Jy
! Component: 100  -  total flux cleaned = 0.263068 Jy
! Total flux subtracted in 100 components = 0.263068 Jy
! Clean residual min=-0.014183 max=0.030456 Jy/beam
! Clean residual mean=0.000022 rms=0.004423 Jy/beam
! Combined flux in latest and established models = 0.263068 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.263068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102415Jy  sigma=2.300271
! Fit after  self-cal, rms=0.102265Jy  sigma=2.297013
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0372178 Jy
! Component: 100  -  total flux cleaned = 0.0625048 Jy
! Total flux subtracted in 100 components = 0.0625048 Jy
! Clean residual min=-0.009222 max=0.014204 Jy/beam
! Clean residual mean=0.000010 rms=0.002649 Jy/beam
! Combined flux in latest and established models = 0.325572 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 0.325572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079369Jy  sigma=1.725795
! Fit after  self-cal, rms=0.079305Jy  sigma=1.724079
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.301 mas, bmaj=1.895 mas, bpa=25.39 degrees
! Estimated noise=0.228833 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027632 Jy
! Component: 100  -  total flux cleaned = 0.0448888 Jy
! Component: 150  -  total flux cleaned = 0.0563639 Jy
! Component: 200  -  total flux cleaned = 0.0641891 Jy
! Total flux subtracted in 200 components = 0.0641891 Jy
! Clean residual min=-0.004719 max=0.007511 Jy/beam
! Clean residual mean=-0.000020 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.389762 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 73 components and 0.389762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068273Jy  sigma=1.440516
! Fit after  self-cal, rms=0.068263Jy  sigma=1.439880
! Inverting map 
! Added new window around map position (-1.8, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716959 Jy
! Component: 100  -  total flux cleaned = 0.0117778 Jy
! Component: 150  -  total flux cleaned = 0.0146021 Jy
! Component: 200  -  total flux cleaned = 0.0163863 Jy
! Total flux subtracted in 200 components = 0.0163863 Jy
! Clean residual min=-0.003929 max=0.004335 Jy/beam
! Clean residual mean=-0.000018 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.406148 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 100 components and 0.406148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067242Jy  sigma=1.418549
! Fit after  self-cal, rms=0.067205Jy  sigma=1.417497
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.301 x 1.895 at 25.39 degrees (North through East)
! Clean map  min=-0.0035989  max=0.26618 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.09     KP        0.99     
!   LA        1.01     NL        1.01     OV        1.01     PT        0.98     
!   SC        1.18     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.04     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.01     PT        0.99     
!   SC        1.18     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.05     KP        0.99     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.15     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.06     KP        0.99     
!   LA        0.99     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.18     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.99     NL        0.99     OV        0.99     PT        0.97     
!   SC        1.19     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.00     NL        0.99     OV        1.00     PT        0.96     
!   SC        1.15     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.00     OV        0.99     PT        1.01     
!   SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.99     NL        0.98     OV        1.00     PT        0.99     
!   SC        1.16     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.98     
!   LA        1.00     NL        0.98     OV        0.99     PT        0.96     
!   SC        1.17     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.99     KP        0.97     
!   LA        1.00     NL        0.98     OV        1.00     PT        0.98     
!   SC        1.15     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.99     NL        0.97     OV        0.99     PT        0.96     
!   SC        1.10     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        0.98     
!   LA        1.00     NL        0.97     OV        0.99     PT        0.95     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.067205Jy  sigma=1.417497
! Fit after  self-cal, rms=0.068401Jy  sigma=1.384515
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.342 mas, bmaj=1.907 mas, bpa=24.63 degrees
! Estimated noise=0.233544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.22956e-05 Jy
! Component: 100  -  total flux cleaned = -0.000185921 Jy
! Component: 150  -  total flux cleaned = -7.84959e-05 Jy
! Component: 200  -  total flux cleaned = 0.000120114 Jy
! Total flux subtracted in 200 components = 0.000120114 Jy
! Clean residual min=-0.002552 max=0.002815 Jy/beam
! Clean residual mean=-0.000011 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.406268 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 114 components and 0.406268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068270Jy  sigma=1.381808
! Fit after  self-cal, rms=0.068302Jy  sigma=1.381651
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068302Jy  sigma=1.381651
! Fit after  self-cal, rms=0.068326Jy  sigma=1.373666
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.318 mas, bmaj=1.913 mas, bpa=25.43 degrees
! Estimated noise=0.232058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00156341 Jy
! Component: 100  -  total flux cleaned = -0.00148295 Jy
! Component: 150  -  total flux cleaned = -0.0015191 Jy
! Component: 200  -  total flux cleaned = -0.00158114 Jy
! Total flux subtracted in 200 components = -0.00158114 Jy
! Clean residual min=-0.001700 max=0.002102 Jy/beam
! Clean residual mean=-0.000006 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.404687 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 126 components and 0.404687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068269Jy  sigma=1.372398
! Fit after  self-cal, rms=0.068278Jy  sigma=1.372363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136723 Jy
! Component: 100  -  total flux cleaned = 0.00124095 Jy
! Component: 150  -  total flux cleaned = 0.00127436 Jy
! Component: 200  -  total flux cleaned = 0.00130466 Jy
! Total flux subtracted in 200 components = 0.00130466 Jy
! Clean residual min=-0.001605 max=0.001637 Jy/beam
! Clean residual mean=-0.000006 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.405991 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 144 components and 0.405991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068210Jy  sigma=1.371144
! Fit after  self-cal, rms=0.068208Jy  sigma=1.371087
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068208Jy  sigma=1.371087
! Fit after  self-cal, rms=0.068415Jy  sigma=1.370883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=1.915 mas, bpa=25.53 degrees
! Estimated noise=0.232238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284637 Jy
! Component: 100  -  total flux cleaned = -0.000370808 Jy
! Component: 150  -  total flux cleaned = -0.000318503 Jy
! Component: 200  -  total flux cleaned = -0.000340957 Jy
! Total flux subtracted in 200 components = -0.000340957 Jy
! Clean residual min=-0.001458 max=0.001615 Jy/beam
! Clean residual mean=-0.000005 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.40565 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 152 components and 0.40565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068391Jy  sigma=1.370416
! Fit after  self-cal, rms=0.068394Jy  sigma=1.370408
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.71152e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109297 Jy
! Component: 150  -  total flux cleaned = -0.000129509 Jy
! Component: 200  -  total flux cleaned = -0.000185495 Jy
! Total flux subtracted in 200 components = -0.000185495 Jy
! Clean residual min=-0.001428 max=0.001614 Jy/beam
! Clean residual mean=-0.000005 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.405465 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 161 components and 0.405465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068382Jy  sigma=1.370183
! Fit after  self-cal, rms=0.068382Jy  sigma=1.370180
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068382Jy  sigma=1.370180
! Fit after  self-cal, rms=0.068451Jy  sigma=1.370116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.321 mas, bmaj=2.429 mas, bpa=-26.75 degrees
! Estimated noise=0.261854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000579496 Jy
! Component: 100  -  total flux cleaned = -0.000769401 Jy
! Component: 150  -  total flux cleaned = -0.000895757 Jy
! Component: 200  -  total flux cleaned = -0.000937511 Jy
! Total flux subtracted in 200 components = -0.000937511 Jy
! Clean residual min=-0.001547 max=0.001744 Jy/beam
! Clean residual mean=-0.000010 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.404527 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 173 components and 0.404527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068447Jy  sigma=1.370005
! Fit after  self-cal, rms=0.068447Jy  sigma=1.369992
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000178501 Jy
! Component: 100  -  total flux cleaned = -0.000153988 Jy
! Component: 150  -  total flux cleaned = -0.000131736 Jy
! Component: 200  -  total flux cleaned = -0.000110168 Jy
! Total flux subtracted in 200 components = -0.000110168 Jy
! Clean residual min=-0.001550 max=0.001677 Jy/beam
! Clean residual mean=-0.000010 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.404417 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 177 components and 0.404417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068445Jy  sigma=1.369934
! Fit after  self-cal, rms=0.068445Jy  sigma=1.369932
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=1.916 mas, bpa=25.57 degrees
! Estimated noise=0.232321 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.317 x 1.916 at 25.57 degrees (North through East)
! Clean map  min=-0.0013515  max=0.26905 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9992 mas, bmaj=1.792 mas, bpa=29.55 degrees
! Estimated noise=0.51054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199492 Jy
! Component: 100  -  total flux cleaned = 0.269904 Jy
! Component: 150  -  total flux cleaned = 0.305553 Jy
! Component: 200  -  total flux cleaned = 0.329293 Jy
! Total flux subtracted in 200 components = 0.329293 Jy
! Clean residual min=-0.007489 max=0.013195 Jy/beam
! Clean residual mean=0.000012 rms=0.002204 Jy/beam
! Combined flux in latest and established models = 0.329293 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.329293 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=1.916 mas, bpa=25.57 degrees
! Estimated noise=0.232321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0241101 Jy
! Component: 100  -  total flux cleaned = 0.038966 Jy
! Component: 150  -  total flux cleaned = 0.0488921 Jy
! Component: 200  -  total flux cleaned = 0.0558086 Jy
! Total flux subtracted in 200 components = 0.0558086 Jy
! Clean residual min=-0.002865 max=0.003957 Jy/beam
! Clean residual mean=-0.000008 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.385102 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 78 components and 0.385102 Jy
! Inverting map 
! Added new window around map position (1.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00505088 Jy
! Component: 100  -  total flux cleaned = 0.0087648 Jy
! Component: 150  -  total flux cleaned = 0.0116424 Jy
! Component: 200  -  total flux cleaned = 0.0139515 Jy
! Total flux subtracted in 200 components = 0.0139515 Jy
! Clean residual min=-0.002009 max=0.002116 Jy/beam
! Clean residual mean=-0.000006 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.399053 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.399053 Jy
! Inverting map 
! Added new window around map position (37.4, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212396 Jy
! Component: 100  -  total flux cleaned = 0.00365077 Jy
! Component: 150  -  total flux cleaned = 0.00445315 Jy
! Component: 200  -  total flux cleaned = 0.00497181 Jy
! Total flux subtracted in 200 components = 0.00497181 Jy
! Clean residual min=-0.001778 max=0.001662 Jy/beam
! Clean residual mean=-0.000006 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.404025 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 105 components and 0.404025 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.321 mas, bmaj=2.429 mas, bpa=-26.75 degrees
! Estimated noise=0.261854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115535 Jy
! Component: 100  -  total flux cleaned = 0.00165373 Jy
! Component: 150  -  total flux cleaned = 0.00194064 Jy
! Component: 200  -  total flux cleaned = 0.00222261 Jy
! Total flux subtracted in 200 components = 0.00222261 Jy
! Clean residual min=-0.001732 max=0.001619 Jy/beam
! Clean residual mean=-0.000011 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.406248 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000277683 Jy
! Component: 100  -  total flux cleaned = 0.000477678 Jy
! Component: 150  -  total flux cleaned = 0.000660957 Jy
! Component: 200  -  total flux cleaned = 0.000851655 Jy
! Total flux subtracted in 200 components = 0.000851655 Jy
! Clean residual min=-0.001713 max=0.001520 Jy/beam
! Clean residual mean=-0.000010 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.407099 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 146 components and 0.407099 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=1.916 mas, bpa=25.57 degrees
! Estimated noise=0.232321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421212 Jy
! Component: 100  -  total flux cleaned = -0.000351533 Jy
! Component: 150  -  total flux cleaned = -0.000288729 Jy
! Component: 200  -  total flux cleaned = -0.000230845 Jy
! Total flux subtracted in 200 components = -0.000230845 Jy
! Clean residual min=-0.001717 max=0.001416 Jy/beam
! Clean residual mean=-0.000005 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.406868 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 160 components and 0.406868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068448Jy  sigma=1.369985
! Fit after  self-cal, rms=0.068443Jy  sigma=1.369914
wmodel /J2050+3619_X_map.mod
! wmodel: Unable to open new model file: /J2050+3619_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2050+3619_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.317 x 1.916 at 25.57 degrees (North through East)
! Clean map  min=-0.0016632  max=0.27022 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2050+3619_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.270218 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000369291 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.409993 0.409993 0.819987 1.63997 3.27995 6.55989 13.1198 26.2396 52.4791
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.27 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  731.719 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2050+3619_X_dfm.log closed on Thu May 19 18:56:54 2016