! Started logfile: /scr/pima/bg219e_uvs/J2047-2849_X_dfm.log on Thu May 19 18:56:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2047-2849_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2047-2849_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.804211 visibilities/baseline/integration-bin.
! Found source: J2047-2849
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21540 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2047-2849_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007399Jy  sigma=19.634095
! Fit after  self-cal, rms=0.933664Jy  sigma=18.127013
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7844 mas, bmaj=3.884 mas, bpa=19.5 degrees
! Estimated noise=0.642828 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0526802 Jy
! Component: 100  -  total flux cleaned = 0.0643244 Jy
! Total flux subtracted in 100 components = 0.0643244 Jy
! Clean residual min=-0.005445 max=0.007734 Jy/beam
! Clean residual mean=-0.000008 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.0643244 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0643244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083237Jy  sigma=1.405679
! Fit after  self-cal, rms=0.081759Jy  sigma=1.376830
! Inverting map 
! Added new window around map position (-3.8, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836982 Jy
! Component: 100  -  total flux cleaned = 0.0137193 Jy
! Total flux subtracted in 100 components = 0.0137193 Jy
! Clean residual min=-0.004427 max=0.004222 Jy/beam
! Clean residual mean=-0.000006 rms=0.001015 Jy/beam
! Combined flux in latest and established models = 0.0780437 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.0780437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080646Jy  sigma=1.345101
! Fit after  self-cal, rms=0.080475Jy  sigma=1.341855
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=4.474 mas, bpa=16.42 degrees
! Estimated noise=0.273695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00769109 Jy
! Component: 100  -  total flux cleaned = 0.0127343 Jy
! Component: 150  -  total flux cleaned = 0.0163776 Jy
! Component: 200  -  total flux cleaned = 0.0190654 Jy
! Total flux subtracted in 200 components = 0.0190654 Jy
! Clean residual min=-0.002131 max=0.002450 Jy/beam
! Clean residual mean=-0.000004 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.0971091 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 73 components and 0.0971091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079734Jy  sigma=1.319175
! Fit after  self-cal, rms=0.079690Jy  sigma=1.317655
! Inverting map 
! Added new window around map position (5.4, -17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292645 Jy
! Component: 100  -  total flux cleaned = 0.00472957 Jy
! Component: 150  -  total flux cleaned = 0.00608559 Jy
! Component: 200  -  total flux cleaned = 0.00712889 Jy
! Total flux subtracted in 200 components = 0.00712889 Jy
! Clean residual min=-0.001830 max=0.001641 Jy/beam
! Clean residual mean=-0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.104238 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 104 components and 0.104238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079573Jy  sigma=1.314534
! Fit after  self-cal, rms=0.079547Jy  sigma=1.313808
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 4.474 at 16.42 degrees (North through East)
! Clean map  min=-0.0016217  max=0.072879 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.98     KP        0.97     
!   LA        0.98     NL        1.04     OV        0.92     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.07     KP        0.98     
!   LA        0.93     NL        0.98     OV        1.00     PT        0.95     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.10     KP        0.95     
!   LA        0.98     NL        0.96     OV        1.02     PT        1.00     
!   SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.07     KP        1.01     
!   LA        0.95     NL        1.10     OV        0.95     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        0.98     
!   LA        1.00     NL        1.09     OV        0.95     PT        0.97     
!   SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        1.01     
!   LA        0.95     NL        0.98     OV        1.00     PT        0.98     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.91     KP        0.96     
!   LA        0.99     NL        1.06     OV        1.00     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.04     KP        1.00     
!   LA        0.98     NL        0.96     OV        1.06     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.89     KP        1.02     
!   LA        1.08     NL        1.02     OV        0.99     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        0.90     KP        0.97     
!   LA        0.98     NL        1.03     OV        1.04     PT        1.05     
!   SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.00     KP        0.97     
!   LA        1.03     NL        1.07     OV        0.98     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        0.96     KP        1.02     
!   LA        1.01     NL        0.98     OV        1.03     PT        0.98     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.079547Jy  sigma=1.313808
! Fit after  self-cal, rms=0.079190Jy  sigma=1.311362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=4.49 mas, bpa=16.4 degrees
! Estimated noise=0.270912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188758 Jy
! Component: 100  -  total flux cleaned = 0.000248705 Jy
! Component: 150  -  total flux cleaned = 0.000324134 Jy
! Component: 200  -  total flux cleaned = 0.000345022 Jy
! Total flux subtracted in 200 components = 0.000345022 Jy
! Clean residual min=-0.001525 max=0.001533 Jy/beam
! Clean residual mean=0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.104583 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 125 components and 0.104583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079169Jy  sigma=1.310957
! Fit after  self-cal, rms=0.079204Jy  sigma=1.310743
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079204Jy  sigma=1.310743
! Fit after  self-cal, rms=0.079176Jy  sigma=1.310712
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=4.494 mas, bpa=16.38 degrees
! Estimated noise=0.270297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000194187 Jy
! Component: 100  -  total flux cleaned = -0.000150355 Jy
! Component: 150  -  total flux cleaned = -0.000150387 Jy
! Component: 200  -  total flux cleaned = -0.000150399 Jy
! Total flux subtracted in 200 components = -0.000150399 Jy
! Clean residual min=-0.001489 max=0.001472 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.104433 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 136 components and 0.104433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079164Jy  sigma=1.310508
! Fit after  self-cal, rms=0.079168Jy  sigma=1.310482
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.50979e-05 Jy
! Component: 100  -  total flux cleaned = 1.56673e-05 Jy
! Component: 150  -  total flux cleaned = 4.77225e-05 Jy
! Component: 200  -  total flux cleaned = 3.16979e-05 Jy
! Total flux subtracted in 200 components = 3.16979e-05 Jy
! Clean residual min=-0.001472 max=0.001471 Jy/beam
! Clean residual mean=0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.104464 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 139 components and 0.104464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079160Jy  sigma=1.310361
! Fit after  self-cal, rms=0.079159Jy  sigma=1.310349
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079159Jy  sigma=1.310349
! Fit after  self-cal, rms=0.079666Jy  sigma=1.308279
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.098 mas, bmaj=4.485 mas, bpa=16.39 degrees
! Estimated noise=0.269912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133022 Jy
! Component: 100  -  total flux cleaned = -0.00011573 Jy
! Component: 150  -  total flux cleaned = -0.000115168 Jy
! Component: 200  -  total flux cleaned = -0.000142235 Jy
! Total flux subtracted in 200 components = -0.000142235 Jy
! Clean residual min=-0.001309 max=0.001386 Jy/beam
! Clean residual mean=-0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.104322 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 149 components and 0.104322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079659Jy  sigma=1.308162
! Fit after  self-cal, rms=0.079691Jy  sigma=1.308007
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.8, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119251 Jy
! Component: 100  -  total flux cleaned = 0.00148181 Jy
! Component: 150  -  total flux cleaned = 0.00166196 Jy
! Component: 200  -  total flux cleaned = 0.00179569 Jy
! Total flux subtracted in 200 components = 0.00179569 Jy
! Clean residual min=-0.001197 max=0.001106 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.106118 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 168 components and 0.106118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079659Jy  sigma=1.307504
! Fit after  self-cal, rms=0.079665Jy  sigma=1.307431
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079665Jy  sigma=1.307431
! Fit after  self-cal, rms=0.079541Jy  sigma=1.307391
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.311 mas, bmaj=7.328 mas, bpa=5.414 degrees
! Estimated noise=0.291445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000393758 Jy
! Component: 100  -  total flux cleaned = 0.000810868 Jy
! Component: 150  -  total flux cleaned = 0.00111073 Jy
! Component: 200  -  total flux cleaned = 0.00128762 Jy
! Total flux subtracted in 200 components = 0.00128762 Jy
! Clean residual min=-0.001124 max=0.000948 Jy/beam
! Clean residual mean=0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.107405 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 180 components and 0.107405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079536Jy  sigma=1.307273
! Fit after  self-cal, rms=0.079541Jy  sigma=1.307256
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240385 Jy
! Component: 100  -  total flux cleaned = 0.000402376 Jy
! Component: 150  -  total flux cleaned = 0.0004924 Jy
! Component: 200  -  total flux cleaned = 0.000545268 Jy
! Total flux subtracted in 200 components = 0.000545268 Jy
! Clean residual min=-0.001085 max=0.000883 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.107951 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 188 components and 0.107951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079539Jy  sigma=1.307209
! Fit after  self-cal, rms=0.079539Jy  sigma=1.307204
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.099 mas, bmaj=4.486 mas, bpa=16.38 degrees
! Estimated noise=0.269035 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.099 x 4.486 at 16.38 degrees (North through East)
! Clean map  min=-0.0010987  max=0.072324 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7861 mas, bmaj=3.867 mas, bpa=19.51 degrees
! Estimated noise=0.633066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0530942 Jy
! Component: 100  -  total flux cleaned = 0.0673199 Jy
! Component: 150  -  total flux cleaned = 0.075274 Jy
! Component: 200  -  total flux cleaned = 0.0807841 Jy
! Total flux subtracted in 200 components = 0.0807841 Jy
! Clean residual min=-0.004108 max=0.003667 Jy/beam
! Clean residual mean=-0.000005 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.0807841 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0807841 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.099 mas, bmaj=4.486 mas, bpa=16.38 degrees
! Estimated noise=0.269035 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00696774 Jy
! Component: 100  -  total flux cleaned = 0.0115543 Jy
! Component: 150  -  total flux cleaned = 0.0148192 Jy
! Component: 200  -  total flux cleaned = 0.017229 Jy
! Total flux subtracted in 200 components = 0.017229 Jy
! Clean residual min=-0.001618 max=0.001878 Jy/beam
! Clean residual mean=-0.000003 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0980131 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 83 components and 0.0980131 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.311 mas, bmaj=7.328 mas, bpa=5.414 degrees
! Estimated noise=0.291445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024461 Jy
! Component: 100  -  total flux cleaned = 0.00401382 Jy
! Component: 150  -  total flux cleaned = 0.0052205 Jy
! Component: 200  -  total flux cleaned = 0.0062303 Jy
! Total flux subtracted in 200 components = 0.0062303 Jy
! Clean residual min=-0.001403 max=0.001148 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.104243 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000866549 Jy
! Component: 100  -  total flux cleaned = 0.00155666 Jy
! Component: 150  -  total flux cleaned = 0.00200539 Jy
! Component: 200  -  total flux cleaned = 0.00238476 Jy
! Total flux subtracted in 200 components = 0.00238476 Jy
! Clean residual min=-0.001287 max=0.001076 Jy/beam
! Clean residual mean=-0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.106628 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 129 components and 0.106628 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.099 mas, bmaj=4.486 mas, bpa=16.38 degrees
! Estimated noise=0.269035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201112 Jy
! Component: 100  -  total flux cleaned = 0.000429157 Jy
! Component: 150  -  total flux cleaned = 0.000606915 Jy
! Component: 200  -  total flux cleaned = 0.000687948 Jy
! Total flux subtracted in 200 components = 0.000687948 Jy
! Clean residual min=-0.001237 max=0.001137 Jy/beam
! Clean residual mean=0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.107316 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 146 components and 0.107316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079585Jy  sigma=1.307910
! Fit after  self-cal, rms=0.079579Jy  sigma=1.307800
wmodel /J2047-2849_X_map.mod
! wmodel: Unable to open new model file: /J2047-2849_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2047-2849_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.099 x 4.486 at 16.38 degrees (North through East)
! Clean map  min=-0.0011903  max=0.071835 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2047-2849_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0718352 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0002899 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.21069 1.21069 2.42138 4.84275 9.6855 19.371 38.742 77.484
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  247.792 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2047-2849_X_dfm.log closed on Thu May 19 18:56:45 2016