! Started logfile: /scr/pima/bg219e_uvs/J2047-2849_S_uvs.log on Thu Apr  7 06:53:43 2016
obs /scr/pima/bg219e_uvs/J2047-2849_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2047-2849_S_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.790323 visibilities/baseline/integration-bin.
! Found source: J2047-2849
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7056 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J2047-2849_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014821Jy  sigma=17.051201
! Fit after  self-cal, rms=0.837800Jy  sigma=13.788240
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.093 mas, bmaj=14.75 mas, bpa=18.49 degrees
! Estimated noise=0.942364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122449 Jy
! Component: 100  -  total flux cleaned = 0.16514 Jy
! Total flux subtracted in 100 components = 0.16514 Jy
! Clean residual min=-0.011407 max=0.021213 Jy/beam
! Clean residual mean=-0.000152 rms=0.003206 Jy/beam
! Combined flux in latest and established models = 0.16514 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.16514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097405Jy  sigma=1.553173
! Fit after  self-cal, rms=0.097221Jy  sigma=1.550133
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254145 Jy
! Component: 100  -  total flux cleaned = 0.0409896 Jy
! Total flux subtracted in 100 components = 0.0409896 Jy
! Clean residual min=-0.007216 max=0.008230 Jy/beam
! Clean residual mean=-0.000053 rms=0.001861 Jy/beam
! Combined flux in latest and established models = 0.206129 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.206129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088765Jy  sigma=1.365878
! Fit after  self-cal, rms=0.088691Jy  sigma=1.364572
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.04 mas, bmaj=16.41 mas, bpa=16.98 degrees
! Estimated noise=0.552357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140331 Jy
! Component: 100  -  total flux cleaned = 0.021124 Jy
! Component: 150  -  total flux cleaned = 0.0250536 Jy
! Component: 200  -  total flux cleaned = 0.0258468 Jy
! Total flux subtracted in 200 components = 0.0258468 Jy
! Clean residual min=-0.004203 max=0.005111 Jy/beam
! Clean residual mean=0.000028 rms=0.001209 Jy/beam
! Combined flux in latest and established models = 0.231976 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 76 components and 0.231976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086759Jy  sigma=1.322629
! Fit after  self-cal, rms=0.086676Jy  sigma=1.321863
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.04 x 16.41 at 16.98 degrees (North through East)
! Clean map  min=-0.0040587  max=0.15104 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        1.09     KP        0.99     
!   LA        1.05     NL        0.97     OV        0.95     PT        1.02     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        1.10     KP        0.98     
!   LA        1.06     NL        0.98     OV        0.97     PT        0.98     
!   SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        1.19     KP        1.00     
!   LA        1.03     NL        1.01     OV        0.97     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.13     KP        0.99     
!   LA        1.06     NL        0.97     OV        1.01     PT        0.97     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.086676Jy  sigma=1.321863
! Fit after  self-cal, rms=0.089495Jy  sigma=1.311027
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.078 mas, bmaj=16.72 mas, bpa=17.17 degrees
! Estimated noise=0.553279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00162694 Jy
! Component: 100  -  total flux cleaned = -0.00196285 Jy
! Component: 150  -  total flux cleaned = -0.00201715 Jy
! Component: 200  -  total flux cleaned = -0.00201598 Jy
! Total flux subtracted in 200 components = -0.00201598 Jy
! Clean residual min=-0.003160 max=0.003055 Jy/beam
! Clean residual mean=-0.000007 rms=0.000824 Jy/beam
! Combined flux in latest and established models = 0.22996 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.22996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089370Jy  sigma=1.309713
! Fit after  self-cal, rms=0.089416Jy  sigma=1.309431
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089416Jy  sigma=1.309431
! Fit after  self-cal, rms=0.089971Jy  sigma=1.309265
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.089 mas, bmaj=16.78 mas, bpa=17.17 degrees
! Estimated noise=0.553236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131936 Jy
! Component: 100  -  total flux cleaned = -0.00141901 Jy
! Component: 150  -  total flux cleaned = -0.00146576 Jy
! Component: 200  -  total flux cleaned = -0.00150717 Jy
! Total flux subtracted in 200 components = -0.00150717 Jy
! Clean residual min=-0.002947 max=0.002991 Jy/beam
! Clean residual mean=-0.000007 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.228453 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.228453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089891Jy  sigma=1.308527
! Fit after  self-cal, rms=0.089889Jy  sigma=1.308431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101802 Jy
! Component: 100  -  total flux cleaned = -5.72104e-05 Jy
! Component: 150  -  total flux cleaned = -5.52407e-05 Jy
! Component: 200  -  total flux cleaned = -5.48739e-05 Jy
! Total flux subtracted in 200 components = -5.48739e-05 Jy
! Clean residual min=-0.002872 max=0.002955 Jy/beam
! Clean residual mean=-0.000007 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.228398 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 106 components and 0.228398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089838Jy  sigma=1.308019
! Fit after  self-cal, rms=0.089823Jy  sigma=1.307947
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089823Jy  sigma=1.307947
! Fit after  self-cal, rms=0.091857Jy  sigma=1.303438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.096 mas, bmaj=16.75 mas, bpa=17.09 degrees
! Estimated noise=0.554232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000875461 Jy
! Component: 100  -  total flux cleaned = -0.00087556 Jy
! Component: 150  -  total flux cleaned = -0.000842579 Jy
! Component: 200  -  total flux cleaned = -0.000812431 Jy
! Total flux subtracted in 200 components = -0.000812431 Jy
! Clean residual min=-0.002486 max=0.002864 Jy/beam
! Clean residual mean=0.000001 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.227586 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 110 components and 0.227586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091819Jy  sigma=1.302978
! Fit after  self-cal, rms=0.091849Jy  sigma=1.302839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107281 Jy
! Component: 100  -  total flux cleaned = -1.54187e-05 Jy
! Component: 150  -  total flux cleaned = 1.15656e-05 Jy
! Component: 200  -  total flux cleaned = 3.7193e-05 Jy
! Total flux subtracted in 200 components = 3.7193e-05 Jy
! Clean residual min=-0.002411 max=0.002796 Jy/beam
! Clean residual mean=0.000001 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.227623 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 117 components and 0.227623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091825Jy  sigma=1.302604
! Fit after  self-cal, rms=0.091813Jy  sigma=1.302541
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091813Jy  sigma=1.302541
! Fit after  self-cal, rms=0.092362Jy  sigma=1.302509
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.403 mas, bmaj=24.83 mas, bpa=7.206 degrees
! Estimated noise=0.603859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00076737 Jy
! Component: 100  -  total flux cleaned = -0.000793215 Jy
! Component: 150  -  total flux cleaned = -0.000792406 Jy
! Component: 200  -  total flux cleaned = -0.000792698 Jy
! Total flux subtracted in 200 components = -0.000792698 Jy
! Clean residual min=-0.002454 max=0.002331 Jy/beam
! Clean residual mean=-0.000001 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.22683 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 121 components and 0.22683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092347Jy  sigma=1.302309
! Fit after  self-cal, rms=0.092347Jy  sigma=1.302271
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.05572e-05 Jy
! Component: 100  -  total flux cleaned = -4.92938e-05 Jy
! Component: 150  -  total flux cleaned = -4.86038e-05 Jy
! Component: 200  -  total flux cleaned = -2.94486e-05 Jy
! Total flux subtracted in 200 components = -2.94486e-05 Jy
! Clean residual min=-0.002436 max=0.002287 Jy/beam
! Clean residual mean=-0.000001 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.226801 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 124 components and 0.226801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092337Jy  sigma=1.302190
! Fit after  self-cal, rms=0.092329Jy  sigma=1.302147
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=16.77 mas, bpa=17.1 degrees
! Estimated noise=0.554858 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.099 x 16.77 at 17.1 degrees (North through East)
! Clean map  min=-0.0023324  max=0.15021 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=15.03 mas, bpa=18.68 degrees
! Estimated noise=0.958687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124226 Jy
! Component: 100  -  total flux cleaned = 0.166166 Jy
! Component: 150  -  total flux cleaned = 0.189194 Jy
! Component: 200  -  total flux cleaned = 0.203011 Jy
! Total flux subtracted in 200 components = 0.203011 Jy
! Clean residual min=-0.005790 max=0.007296 Jy/beam
! Clean residual mean=-0.000046 rms=0.001643 Jy/beam
! Combined flux in latest and established models = 0.203011 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.203011 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=16.77 mas, bpa=17.1 degrees
! Estimated noise=0.554858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123184 Jy
! Component: 100  -  total flux cleaned = 0.0187273 Jy
! Component: 150  -  total flux cleaned = 0.0224119 Jy
! Component: 200  -  total flux cleaned = 0.024064 Jy
! Total flux subtracted in 200 components = 0.024064 Jy
! Clean residual min=-0.002791 max=0.002761 Jy/beam
! Clean residual mean=-0.000001 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.227075 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 65 components and 0.227075 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.403 mas, bmaj=24.83 mas, bpa=7.206 degrees
! Estimated noise=0.603859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000845249 Jy
! Component: 100  -  total flux cleaned = 0.000845124 Jy
! Component: 150  -  total flux cleaned = 0.000772198 Jy
! Component: 200  -  total flux cleaned = 0.000738743 Jy
! Total flux subtracted in 200 components = 0.000738743 Jy
! Clean residual min=-0.002459 max=0.002348 Jy/beam
! Clean residual mean=0.000003 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.227814 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.79123e-05 Jy
! Component: 100  -  total flux cleaned = -0.000132433 Jy
! Component: 150  -  total flux cleaned = -0.000194124 Jy
! Component: 200  -  total flux cleaned = -0.000222462 Jy
! Total flux subtracted in 200 components = -0.000222462 Jy
! Clean residual min=-0.002457 max=0.002372 Jy/beam
! Clean residual mean=0.000002 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.227592 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.227592 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=16.77 mas, bpa=17.1 degrees
! Estimated noise=0.554858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.08693e-05 Jy
! Component: 100  -  total flux cleaned = 0.000185047 Jy
! Component: 150  -  total flux cleaned = 0.000370351 Jy
! Component: 200  -  total flux cleaned = 0.000410121 Jy
! Total flux subtracted in 200 components = 0.000410121 Jy
! Clean residual min=-0.002675 max=0.002721 Jy/beam
! Clean residual mean=0.000003 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.228002 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 90 components and 0.228002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092439Jy  sigma=1.303159
! Fit after  self-cal, rms=0.092420Jy  sigma=1.302949
wmodel /scr/pima/bg219e_uvs/J2047-2849_S_map.mod
! Writing 90 model components to file: /scr/pima/bg219e_uvs/J2047-2849_S_map.mod
wobs /scr/pima/bg219e_uvs/J2047-2849_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J2047-2849_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J2047-2849_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219e_uvs/J2047-2849_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157604 Jy
! Component: 100  -  total flux cleaned = 6.83497e-05 Jy
! Component: 150  -  total flux cleaned = -5.68963e-05 Jy
! Component: 200  -  total flux cleaned = 9.96796e-05 Jy
! Component: 250  -  total flux cleaned = 0.000213539 Jy
! Component: 300  -  total flux cleaned = 0.000324972 Jy
! Component: 350  -  total flux cleaned = 0.000540197 Jy
! Component: 400  -  total flux cleaned = 0.000818813 Jy
! Component: 450  -  total flux cleaned = 0.00102322 Jy
! Component: 500  -  total flux cleaned = 0.00122392 Jy
! Component: 550  -  total flux cleaned = 0.00142026 Jy
! Component: 600  -  total flux cleaned = 0.00164424 Jy
! Component: 650  -  total flux cleaned = 0.00183214 Jy
! Component: 700  -  total flux cleaned = 0.00201657 Jy
! Component: 750  -  total flux cleaned = 0.00210733 Jy
! Component: 800  -  total flux cleaned = 0.00222613 Jy
! Component: 850  -  total flux cleaned = 0.00225534 Jy
! Component: 900  -  total flux cleaned = 0.00225572 Jy
! Component: 950  -  total flux cleaned = 0.00231249 Jy
! Component: 1000  -  total flux cleaned = 0.00234051 Jy
! Component: 1050  -  total flux cleaned = 0.00234038 Jy
! Component: 1100  -  total flux cleaned = 0.00239363 Jy
! Component: 1150  -  total flux cleaned = 0.00239305 Jy
! Component: 1200  -  total flux cleaned = 0.00239362 Jy
! Component: 1250  -  total flux cleaned = 0.00236782 Jy
! Component: 1300  -  total flux cleaned = 0.00239345 Jy
! Component: 1350  -  total flux cleaned = 0.00239378 Jy
! Component: 1400  -  total flux cleaned = 0.00244342 Jy
! Component: 1450  -  total flux cleaned = 0.00249223 Jy
! Component: 1500  -  total flux cleaned = 0.00249207 Jy
! Component: 1550  -  total flux cleaned = 0.00253996 Jy
! Component: 1600  -  total flux cleaned = 0.00258733 Jy
! Component: 1650  -  total flux cleaned = 0.00254018 Jy
! Component: 1700  -  total flux cleaned = 0.00247074 Jy
! Component: 1750  -  total flux cleaned = 0.00251718 Jy
! Component: 1800  -  total flux cleaned = 0.00249467 Jy
! Component: 1850  -  total flux cleaned = 0.00256204 Jy
! Component: 1900  -  total flux cleaned = 0.00245061 Jy
! Component: 1950  -  total flux cleaned = 0.00245072 Jy
! Component: 2000  -  total flux cleaned = 0.00247233 Jy
! Component: 2050  -  total flux cleaned = 0.00240735 Jy
! Component: 2100  -  total flux cleaned = 0.00240725 Jy
! Component: 2150  -  total flux cleaned = 0.00236451 Jy
! Component: 2200  -  total flux cleaned = 0.00236448 Jy
! Component: 2250  -  total flux cleaned = 0.00228078 Jy
! Component: 2300  -  total flux cleaned = 0.00221908 Jy
! Component: 2350  -  total flux cleaned = 0.00217812 Jy
! Component: 2400  -  total flux cleaned = 0.0021376 Jy
! Component: 2450  -  total flux cleaned = 0.00207699 Jy
! Component: 2500  -  total flux cleaned = 0.00203702 Jy
! Component: 2550  -  total flux cleaned = 0.00199728 Jy
! Component: 2600  -  total flux cleaned = 0.00193804 Jy
! Component: 2650  -  total flux cleaned = 0.00182064 Jy
! Component: 2700  -  total flux cleaned = 0.00180127 Jy
! Component: 2750  -  total flux cleaned = 0.001705 Jy
! Component: 2800  -  total flux cleaned = 0.00166659 Jy
! Component: 2850  -  total flux cleaned = 0.00151426 Jy
! Component: 2900  -  total flux cleaned = 0.00147642 Jy
! Component: 2950  -  total flux cleaned = 0.00134505 Jy
! Component: 3000  -  total flux cleaned = 0.00130765 Jy
! Component: 3050  -  total flux cleaned = 0.00115943 Jy
! Component: 3100  -  total flux cleaned = 0.00108582 Jy
! Component: 3150  -  total flux cleaned = 0.000976236 Jy
! Component: 3200  -  total flux cleaned = 0.000958011 Jy
! Component: 3250  -  total flux cleaned = 0.000795528 Jy
! Component: 3300  -  total flux cleaned = 0.000724021 Jy
! Component: 3350  -  total flux cleaned = 0.000617372 Jy
! Component: 3400  -  total flux cleaned = 0.000599738 Jy
! Component: 3450  -  total flux cleaned = 0.000546996 Jy
! Component: 3500  -  total flux cleaned = 0.000477007 Jy
! Component: 3550  -  total flux cleaned = 0.000442316 Jy
! Component: 3600  -  total flux cleaned = 0.000321614 Jy
! Component: 3650  -  total flux cleaned = 0.000235856 Jy
! Component: 3700  -  total flux cleaned = 0.000235793 Jy
! Component: 3750  -  total flux cleaned = 0.000117222 Jy
! Component: 3800  -  total flux cleaned = 1.62133e-05 Jy
! Component: 3850  -  total flux cleaned = -3.40503e-05 Jy
! Component: 3900  -  total flux cleaned = -0.000117081 Jy
! Component: 3950  -  total flux cleaned = -0.000166578 Jy
! Component: 4000  -  total flux cleaned = -0.000232355 Jy
! Component: 4050  -  total flux cleaned = -0.000297688 Jy
! Total flux subtracted in 4096 components = -0.000346446 Jy
! Clean residual min=-0.000952 max=0.000922 Jy/beam
! Clean residual mean=-0.000003 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.227655 Jy
keep
! Adding 233 model components to the UV plane model.
! The established model now contains 323 components and 0.227655 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J2047-2849_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.099 x 16.77 at 17.1 degrees (North through East)
! Clean map  min=-0.0027066  max=0.15051 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2047-2849_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.150512 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000303151 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.604241 0.604241 1.20848 2.41696 4.83393 9.66785 19.3357 38.6714 77.3428
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.15 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  496.49 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2047-2849_S_uvs.log closed on Thu Apr  7 06:53:47 2016