! Started logfile: /scr/pima/bg219e_uvs/J2041-2718_S_dfm.log on Thu May 19 18:56:01 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J2041-2718_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J2041-2718_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.798148 visibilities/baseline/integration-bin. ! Found source: J2041-2718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 6896 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2041-2718_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012612Jy sigma=17.544027 ! Fit after self-cal, rms=0.914270Jy sigma=15.834326 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=14.4 mas, bpa=19.07 degrees ! Estimated noise=0.839496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692206 Jy ! Component: 100 - total flux cleaned = 0.0843299 Jy ! Total flux subtracted in 100 components = 0.0843299 Jy ! Clean residual min=-0.004775 max=0.004869 Jy/beam ! Clean residual mean=-0.000012 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0843299 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0843299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081239Jy sigma=1.326464 ! Fit after self-cal, rms=0.080299Jy sigma=1.312424 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=15.59 mas, bpa=17.67 degrees ! Estimated noise=0.529056 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539456 Jy ! Component: 100 - total flux cleaned = 0.00761344 Jy ! Component: 150 - total flux cleaned = 0.00790073 Jy ! Component: 200 - total flux cleaned = 0.00790466 Jy ! Total flux subtracted in 200 components = 0.00790466 Jy ! Clean residual min=-0.002826 max=0.003006 Jy/beam ! Clean residual mean=0.000005 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.0922346 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.0922346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079989Jy sigma=1.305975 ! Fit after self-cal, rms=0.080001Jy sigma=1.305910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 15.59 at 17.67 degrees (North through East) ! Clean map min=-0.0027449 max=0.090339 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.00 KP 1.00 ! LA 1.01 NL 0.95 OV 0.96 PT 1.00 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.07 KP 0.97 ! LA 1.05 NL 1.10 OV 0.97 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.07 KP 0.99 ! LA 1.01 NL 0.99 OV 1.02 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.98 KP 1.01 ! LA 1.07 NL 0.94 OV 0.97 PT 0.97 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.080001Jy sigma=1.305910 ! Fit after self-cal, rms=0.080513Jy sigma=1.303404 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=15.65 mas, bpa=17.64 degrees ! Estimated noise=0.527094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000814634 Jy ! Component: 100 - total flux cleaned = -0.00084415 Jy ! Component: 150 - total flux cleaned = -0.00089597 Jy ! Component: 200 - total flux cleaned = -0.000940735 Jy ! Total flux subtracted in 200 components = -0.000940735 Jy ! Clean residual min=-0.002821 max=0.002883 Jy/beam ! Clean residual mean=-0.000000 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0912938 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0912938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080489Jy sigma=1.303065 ! Fit after self-cal, rms=0.080537Jy sigma=1.302924 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080537Jy sigma=1.302924 ! Fit after self-cal, rms=0.080914Jy sigma=1.301326 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=15.68 mas, bpa=17.66 degrees ! Estimated noise=0.528944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252947 Jy ! Component: 100 - total flux cleaned = -0.000252369 Jy ! Component: 150 - total flux cleaned = -0.000271901 Jy ! Component: 200 - total flux cleaned = -0.000288529 Jy ! Total flux subtracted in 200 components = -0.000288529 Jy ! Clean residual min=-0.002661 max=0.002799 Jy/beam ! Clean residual mean=0.000001 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.0910053 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0910053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080902Jy sigma=1.301181 ! Fit after self-cal, rms=0.080904Jy sigma=1.301149 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69895e-05 Jy ! Component: 100 - total flux cleaned = 1.22101e-05 Jy ! Component: 150 - total flux cleaned = -1.65989e-05 Jy ! Component: 200 - total flux cleaned = -4.40956e-05 Jy ! Total flux subtracted in 200 components = -4.40956e-05 Jy ! Clean residual min=-0.002663 max=0.002819 Jy/beam ! Clean residual mean=0.000001 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0909612 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.0909612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080897Jy sigma=1.301080 ! Fit after self-cal, rms=0.080896Jy sigma=1.301073 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080896Jy sigma=1.301073 ! Fit after self-cal, rms=0.081031Jy sigma=1.299816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=15.71 mas, bpa=17.7 degrees ! Estimated noise=0.528525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308848 Jy ! Component: 100 - total flux cleaned = -0.00035214 Jy ! Component: 150 - total flux cleaned = -0.000392626 Jy ! Component: 200 - total flux cleaned = -0.000418257 Jy ! Total flux subtracted in 200 components = -0.000418257 Jy ! Clean residual min=-0.002743 max=0.002675 Jy/beam ! Clean residual mean=0.000003 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0905429 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.0905429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081025Jy sigma=1.299758 ! Fit after self-cal, rms=0.081031Jy sigma=1.299677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07267e-05 Jy ! Component: 100 - total flux cleaned = -5.9205e-06 Jy ! Component: 150 - total flux cleaned = -3.14683e-05 Jy ! Component: 200 - total flux cleaned = -5.52582e-05 Jy ! Total flux subtracted in 200 components = -5.52582e-05 Jy ! Clean residual min=-0.002739 max=0.002689 Jy/beam ! Clean residual mean=0.000003 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0904877 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.0904877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081026Jy sigma=1.299628 ! Fit after self-cal, rms=0.081026Jy sigma=1.299622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081026Jy sigma=1.299622 ! Fit after self-cal, rms=0.081005Jy sigma=1.299610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=23.09 mas, bpa=5.989 degrees ! Estimated noise=0.596636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199047 Jy ! Component: 100 - total flux cleaned = -0.000240948 Jy ! Component: 150 - total flux cleaned = -0.000273588 Jy ! Component: 200 - total flux cleaned = -0.000280868 Jy ! Total flux subtracted in 200 components = -0.000280868 Jy ! Clean residual min=-0.002188 max=0.002730 Jy/beam ! Clean residual mean=0.000007 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0902068 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.0902068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081004Jy sigma=1.299629 ! Fit after self-cal, rms=0.081004Jy sigma=1.299620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.02817e-06 Jy ! Component: 100 - total flux cleaned = -2.26289e-05 Jy ! Component: 150 - total flux cleaned = -1.06464e-05 Jy ! Component: 200 - total flux cleaned = -4.91704e-06 Jy ! Total flux subtracted in 200 components = -4.91704e-06 Jy ! Clean residual min=-0.002190 max=0.002742 Jy/beam ! Clean residual mean=0.000007 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0902019 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.0902019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081004Jy sigma=1.299641 ! Fit after self-cal, rms=0.081003Jy sigma=1.299638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=15.72 mas, bpa=17.72 degrees ! Estimated noise=0.527939 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.793 x 15.72 at 17.72 degrees (North through East) ! Clean map min=-0.0026387 max=0.090622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=14.48 mas, bpa=19.11 degrees ! Estimated noise=0.841727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697886 Jy ! Component: 100 - total flux cleaned = 0.0850759 Jy ! Component: 150 - total flux cleaned = 0.0890905 Jy ! Component: 200 - total flux cleaned = 0.0901198 Jy ! Total flux subtracted in 200 components = 0.0901198 Jy ! Clean residual min=-0.003974 max=0.004405 Jy/beam ! Clean residual mean=-0.000005 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0901198 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0901198 Jy ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=15.72 mas, bpa=17.72 degrees ! Estimated noise=0.527939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091129 Jy ! Component: 100 - total flux cleaned = 0.000917172 Jy ! Component: 150 - total flux cleaned = 0.000919987 Jy ! Component: 200 - total flux cleaned = 0.000954611 Jy ! Total flux subtracted in 200 components = 0.000954611 Jy ! Clean residual min=-0.002723 max=0.002734 Jy/beam ! Clean residual mean=0.000003 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0910744 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.0910744 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=23.09 mas, bpa=5.989 degrees ! Estimated noise=0.596636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012841 Jy ! Component: 100 - total flux cleaned = -0.000144087 Jy ! Component: 150 - total flux cleaned = -0.000213634 Jy ! Component: 200 - total flux cleaned = -0.000264069 Jy ! Total flux subtracted in 200 components = -0.000264069 Jy ! Clean residual min=-0.002200 max=0.002786 Jy/beam ! Clean residual mean=0.000008 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.0908104 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.76559e-05 Jy ! Component: 100 - total flux cleaned = -9.24537e-05 Jy ! Component: 150 - total flux cleaned = -0.00013488 Jy ! Component: 200 - total flux cleaned = -0.000175647 Jy ! Total flux subtracted in 200 components = -0.000175647 Jy ! Clean residual min=-0.002179 max=0.002780 Jy/beam ! Clean residual mean=0.000008 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.0906347 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.0906347 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=15.72 mas, bpa=17.72 degrees ! Estimated noise=0.527939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.33219e-05 Jy ! Component: 100 - total flux cleaned = -5.53524e-05 Jy ! Component: 150 - total flux cleaned = -9.79222e-05 Jy ! Component: 200 - total flux cleaned = -0.000137117 Jy ! Total flux subtracted in 200 components = -0.000137117 Jy ! Clean residual min=-0.002701 max=0.002710 Jy/beam ! Clean residual mean=0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0904976 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0904976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081023Jy sigma=1.299911 ! Fit after self-cal, rms=0.081029Jy sigma=1.299871 wmodel /J2041-2718_S_map.mod ! wmodel: Unable to open new model file: /J2041-2718_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J2041-2718_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.793 x 15.72 at 17.72 degrees (North through East) ! Clean map min=-0.0025936 max=0.090792 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2041-2718_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0907919 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000671551 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.21898 2.21898 4.43796 8.87591 17.7518 35.5037 71.0073 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.09 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 135.197 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J2041-2718_S_dfm.log closed on Thu May 19 18:56:03 2016