! Started logfile: /scr/pima/bg219e_uvs/J2037-2438_X_dfm.log on Thu May 19 18:55:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2037-2438_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2037-2438_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.890873 visibilities/baseline/integration-bin.
! Found source: J2037-2438
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16164 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2037-2438_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009608Jy  sigma=20.928600
! Fit after  self-cal, rms=0.875119Jy  sigma=17.996723
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8017 mas, bmaj=3.631 mas, bpa=19.15 degrees
! Estimated noise=0.586197 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0954496 Jy
! Component: 100  -  total flux cleaned = 0.11872 Jy
! Total flux subtracted in 100 components = 0.11872 Jy
! Clean residual min=-0.004685 max=0.009076 Jy/beam
! Clean residual mean=-0.000006 rms=0.001442 Jy/beam
! Combined flux in latest and established models = 0.11872 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.11872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077455Jy  sigma=1.437800
! Fit after  self-cal, rms=0.077367Jy  sigma=1.435412
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105438 Jy
! Component: 100  -  total flux cleaned = 0.0172809 Jy
! Total flux subtracted in 100 components = 0.0172809 Jy
! Clean residual min=-0.003831 max=0.004928 Jy/beam
! Clean residual mean=-0.000005 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.136001 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.136001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075385Jy  sigma=1.374330
! Fit after  self-cal, rms=0.075403Jy  sigma=1.373934
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=4.066 mas, bpa=16.81 degrees
! Estimated noise=0.287917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00785409 Jy
! Component: 100  -  total flux cleaned = 0.0122437 Jy
! Component: 150  -  total flux cleaned = 0.0149912 Jy
! Component: 200  -  total flux cleaned = 0.0167973 Jy
! Total flux subtracted in 200 components = 0.0167973 Jy
! Clean residual min=-0.002695 max=0.005012 Jy/beam
! Clean residual mean=-0.000004 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.152798 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 73 components and 0.152798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074678Jy  sigma=1.352185
! Fit after  self-cal, rms=0.074712Jy  sigma=1.351922
! Inverting map 
! Added new window around map position (-1.8, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412545 Jy
! Component: 100  -  total flux cleaned = 0.00521317 Jy
! Component: 150  -  total flux cleaned = 0.00569154 Jy
! Component: 200  -  total flux cleaned = 0.00600731 Jy
! Total flux subtracted in 200 components = 0.00600731 Jy
! Clean residual min=-0.002181 max=0.002283 Jy/beam
! Clean residual mean=-0.000000 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.158806 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 100 components and 0.158806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074505Jy  sigma=1.346515
! Fit after  self-cal, rms=0.074484Jy  sigma=1.345643
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 4.066 at 16.81 degrees (North through East)
! Clean map  min=-0.0020004  max=0.12717 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.04     KP        0.99     
!   LA        1.01     NL        0.99     OV        0.94     PT        0.96     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.98     NL        1.02     OV        0.96     PT        0.97     
!   SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.06     KP        0.97     
!   LA        1.01     NL        0.95     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.06     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.14     KP        1.01     
!   LA        1.01     NL        0.97     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        1.02     
!   LA        1.04     NL        1.00     OV        0.95     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.08     KP        1.03     
!   LA        1.04     NL        1.00     OV        0.97     PT        1.04     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.06     KP        1.03     
!   LA        1.03     NL        0.96     OV        0.99     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.11     KP        0.99     
!   LA        1.05     NL        0.95     OV        0.98     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.09     KP        1.02     
!   LA        1.05     NL        1.05     OV        0.97     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.11     KP        1.00     
!   LA        1.07     NL        0.99     OV        0.98     PT        1.00     
!   SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     HN        1.07     KP        1.00     
!   LA        1.06     NL        1.03     OV        0.98     PT        1.01     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.074484Jy  sigma=1.345643
! Fit after  self-cal, rms=0.076566Jy  sigma=1.339810
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=4.098 mas, bpa=16.92 degrees
! Estimated noise=0.288298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.13725e-05 Jy
! Component: 100  -  total flux cleaned = -0.000144252 Jy
! Component: 150  -  total flux cleaned = -7.69386e-05 Jy
! Component: 200  -  total flux cleaned = -4.83329e-05 Jy
! Total flux subtracted in 200 components = -4.83329e-05 Jy
! Clean residual min=-0.001963 max=0.001803 Jy/beam
! Clean residual mean=0.000000 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.158757 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 117 components and 0.158757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076516Jy  sigma=1.339006
! Fit after  self-cal, rms=0.076555Jy  sigma=1.338826
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076555Jy  sigma=1.338826
! Fit after  self-cal, rms=0.077064Jy  sigma=1.336410
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=4.102 mas, bpa=16.92 degrees
! Estimated noise=0.288252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115865 Jy
! Component: 100  -  total flux cleaned = -0.000171396 Jy
! Component: 150  -  total flux cleaned = -0.000221383 Jy
! Component: 200  -  total flux cleaned = -0.000266858 Jy
! Total flux subtracted in 200 components = -0.000266858 Jy
! Clean residual min=-0.001793 max=0.001588 Jy/beam
! Clean residual mean=0.000000 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.15849 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 127 components and 0.15849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077042Jy  sigma=1.336041
! Fit after  self-cal, rms=0.077048Jy  sigma=1.336012
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157894 Jy
! Component: 100  -  total flux cleaned = 0.000137689 Jy
! Component: 150  -  total flux cleaned = 0.000137641 Jy
! Component: 200  -  total flux cleaned = 0.000155761 Jy
! Total flux subtracted in 200 components = 0.000155761 Jy
! Clean residual min=-0.001726 max=0.001561 Jy/beam
! Clean residual mean=0.000000 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.158646 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 141 components and 0.158646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077038Jy  sigma=1.335834
! Fit after  self-cal, rms=0.077033Jy  sigma=1.335824
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077033Jy  sigma=1.335824
! Fit after  self-cal, rms=0.077836Jy  sigma=1.333950
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=4.1 mas, bpa=16.91 degrees
! Estimated noise=0.287835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111429 Jy
! Component: 100  -  total flux cleaned = -0.000165315 Jy
! Component: 150  -  total flux cleaned = -0.000166484 Jy
! Component: 200  -  total flux cleaned = -0.000205719 Jy
! Total flux subtracted in 200 components = -0.000205719 Jy
! Clean residual min=-0.001474 max=0.001471 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.15844 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 159 components and 0.158441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077820Jy  sigma=1.333650
! Fit after  self-cal, rms=0.077838Jy  sigma=1.333611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114262 Jy
! Component: 100  -  total flux cleaned = 0.000115291 Jy
! Component: 150  -  total flux cleaned = 0.000130949 Jy
! Component: 200  -  total flux cleaned = 0.000130622 Jy
! Total flux subtracted in 200 components = 0.000130622 Jy
! Clean residual min=-0.001458 max=0.001477 Jy/beam
! Clean residual mean=0.000001 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.158571 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 175 components and 0.158571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077831Jy  sigma=1.333495
! Fit after  self-cal, rms=0.077828Jy  sigma=1.333492
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077828Jy  sigma=1.333492
! Fit after  self-cal, rms=0.078131Jy  sigma=1.333430
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.303 mas, bmaj=5.855 mas, bpa=6.11 degrees
! Estimated noise=0.315638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.44699e-05 Jy
! Component: 100  -  total flux cleaned = 7.3925e-05 Jy
! Component: 150  -  total flux cleaned = 0.000113905 Jy
! Component: 200  -  total flux cleaned = 0.000126314 Jy
! Total flux subtracted in 200 components = 0.000126314 Jy
! Clean residual min=-0.001311 max=0.001334 Jy/beam
! Clean residual mean=0.000002 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.158697 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 188 components and 0.158697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078125Jy  sigma=1.333383
! Fit after  self-cal, rms=0.078130Jy  sigma=1.333375
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.33989e-05 Jy
! Component: 100  -  total flux cleaned = 1.85773e-05 Jy
! Component: 150  -  total flux cleaned = 4.81979e-05 Jy
! Component: 200  -  total flux cleaned = 8.44407e-05 Jy
! Total flux subtracted in 200 components = 8.44407e-05 Jy
! Clean residual min=-0.001324 max=0.001358 Jy/beam
! Clean residual mean=0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.158782 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 195 components and 0.158782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078127Jy  sigma=1.333341
! Fit after  self-cal, rms=0.078125Jy  sigma=1.333336
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=4.103 mas, bpa=16.92 degrees
! Estimated noise=0.287455 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.094 x 4.103 at 16.92 degrees (North through East)
! Clean map  min=-0.001405  max=0.1269 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8021 mas, bmaj=3.659 mas, bpa=19.29 degrees
! Estimated noise=0.588107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0956014 Jy
! Component: 100  -  total flux cleaned = 0.119212 Jy
! Component: 150  -  total flux cleaned = 0.129581 Jy
! Component: 200  -  total flux cleaned = 0.136116 Jy
! Total flux subtracted in 200 components = 0.136116 Jy
! Clean residual min=-0.003365 max=0.003620 Jy/beam
! Clean residual mean=-0.000005 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.136116 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.136116 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=4.103 mas, bpa=16.92 degrees
! Estimated noise=0.287455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00750791 Jy
! Component: 100  -  total flux cleaned = 0.012013 Jy
! Component: 150  -  total flux cleaned = 0.0150064 Jy
! Component: 200  -  total flux cleaned = 0.0168318 Jy
! Total flux subtracted in 200 components = 0.0168318 Jy
! Clean residual min=-0.001750 max=0.001701 Jy/beam
! Clean residual mean=-0.000002 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.152947 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 89 components and 0.152947 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.303 mas, bmaj=5.855 mas, bpa=6.11 degrees
! Estimated noise=0.315638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197476 Jy
! Component: 100  -  total flux cleaned = 0.00295137 Jy
! Component: 150  -  total flux cleaned = 0.00367936 Jy
! Component: 200  -  total flux cleaned = 0.00420227 Jy
! Total flux subtracted in 200 components = 0.00420227 Jy
! Clean residual min=-0.001493 max=0.001391 Jy/beam
! Clean residual mean=0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.15715 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244017 Jy
! Component: 100  -  total flux cleaned = 0.000469597 Jy
! Component: 150  -  total flux cleaned = 0.000640169 Jy
! Component: 200  -  total flux cleaned = 0.000800145 Jy
! Total flux subtracted in 200 components = 0.000800145 Jy
! Clean residual min=-0.001379 max=0.001331 Jy/beam
! Clean residual mean=0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.15795 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 139 components and 0.15795 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=4.103 mas, bpa=16.92 degrees
! Estimated noise=0.287455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138114 Jy
! Component: 100  -  total flux cleaned = 0.000136717 Jy
! Component: 150  -  total flux cleaned = 7.36021e-05 Jy
! Component: 200  -  total flux cleaned = 5.43135e-05 Jy
! Total flux subtracted in 200 components = 5.43135e-05 Jy
! Clean residual min=-0.001439 max=0.001500 Jy/beam
! Clean residual mean=0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.158004 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 161 components and 0.158004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078136Jy  sigma=1.333530
! Fit after  self-cal, rms=0.078121Jy  sigma=1.333462
wmodel /J2037-2438_X_map.mod
! wmodel: Unable to open new model file: /J2037-2438_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2037-2438_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.094 x 4.103 at 16.92 degrees (North through East)
! Clean map  min=-0.001362  max=0.1278 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2037-2438_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.127797 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000361044 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.847542 0.847542 1.69508 3.39017 6.78034 13.5607 27.1214 54.2427
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.127 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  353.964 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2037-2438_X_dfm.log closed on Thu May 19 18:55:43 2016