! Started logfile: /scr/pima/bg219e_uvs/J2034-1640_X_dfm.log on Thu May 19 18:55:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2034-1640_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2034-1640_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.714444 visibilities/baseline/integration-bin.
! Found source: J2034-1640
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23148 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2034-1640_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005582Jy  sigma=22.631072
! Fit after  self-cal, rms=0.876758Jy  sigma=19.670557
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8359 mas, bmaj=2.848 mas, bpa=18.68 degrees
! Estimated noise=0.465946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0905448 Jy
! Component: 100  -  total flux cleaned = 0.116342 Jy
! Total flux subtracted in 100 components = 0.116342 Jy
! Clean residual min=-0.005248 max=0.012230 Jy/beam
! Clean residual mean=-0.000001 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 0.116342 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.116342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068160Jy  sigma=1.457739
! Fit after  self-cal, rms=0.068055Jy  sigma=1.455718
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142121 Jy
! Component: 100  -  total flux cleaned = 0.022013 Jy
! Total flux subtracted in 100 components = 0.022013 Jy
! Clean residual min=-0.003270 max=0.003782 Jy/beam
! Clean residual mean=-0.000001 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.138355 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 8 components and 0.138355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064285Jy  sigma=1.358784
! Fit after  self-cal, rms=0.064243Jy  sigma=1.357705
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.299 mas, bpa=16.75 degrees
! Estimated noise=0.215017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00611426 Jy
! Component: 100  -  total flux cleaned = 0.008885 Jy
! Component: 150  -  total flux cleaned = 0.0104038 Jy
! Component: 200  -  total flux cleaned = 0.0113405 Jy
! Total flux subtracted in 200 components = 0.0113405 Jy
! Clean residual min=-0.001909 max=0.003184 Jy/beam
! Clean residual mean=-0.000002 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.149696 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 41 components and 0.149696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063747Jy  sigma=1.344648
! Fit after  self-cal, rms=0.063749Jy  sigma=1.344526
! Inverting map 
! Added new window around map position (2.6, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278838 Jy
! Component: 100  -  total flux cleaned = 0.00413515 Jy
! Component: 150  -  total flux cleaned = 0.00488285 Jy
! Component: 200  -  total flux cleaned = 0.00534781 Jy
! Total flux subtracted in 200 components = 0.00534781 Jy
! Clean residual min=-0.001574 max=0.001646 Jy/beam
! Clean residual mean=-0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.155044 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 73 components and 0.155044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063628Jy  sigma=1.341635
! Fit after  self-cal, rms=0.063615Jy  sigma=1.341303
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.074 x 3.299 at 16.75 degrees (North through East)
! Clean map  min=-0.0015023  max=0.12543 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.09     KP        0.99     
!   LA        1.02     NL        0.99     OV        0.97     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        0.99     
!   LA        1.02     NL        0.99     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.99     
!   LA        1.00     NL        0.98     OV        1.01     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        1.00     
!   LA        0.99     NL        1.02     OV        1.01     PT        0.96     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.00     KP        1.01     
!   LA        1.01     NL        1.02     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.99     KP        1.01     
!   LA        1.02     NL        1.00     OV        0.98     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.00     KP        0.98     
!   LA        1.01     NL        1.03     OV        0.98     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.02     
!   LA        1.02     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.98     KP        1.01     
!   LA        1.02     NL        0.97     OV        0.97     PT        0.98     
!   SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.01     KP        0.97     
!   LA        1.04     NL        1.01     OV        0.99     PT        1.00     
!   SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.06     NL        1.02     OV        1.01     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.99     
!   LA        1.02     NL        0.96     OV        1.00     PT        1.00     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.063615Jy  sigma=1.341303
! Fit after  self-cal, rms=0.063524Jy  sigma=1.338746
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=3.307 mas, bpa=16.85 degrees
! Estimated noise=0.214452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000748096 Jy
! Component: 100  -  total flux cleaned = 0.000825991 Jy
! Component: 150  -  total flux cleaned = 0.000781193 Jy
! Component: 200  -  total flux cleaned = 0.000781801 Jy
! Total flux subtracted in 200 components = 0.000781801 Jy
! Clean residual min=-0.001541 max=0.001624 Jy/beam
! Clean residual mean=-0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.155826 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 89 components and 0.155825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063504Jy  sigma=1.338330
! Fit after  self-cal, rms=0.063509Jy  sigma=1.338264
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063509Jy  sigma=1.338264
! Fit after  self-cal, rms=0.063686Jy  sigma=1.335191
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.306 mas, bpa=16.81 degrees
! Estimated noise=0.214413 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012045 Jy
! Component: 100  -  total flux cleaned = -0.00017846 Jy
! Component: 150  -  total flux cleaned = -0.000229495 Jy
! Component: 200  -  total flux cleaned = -0.000244527 Jy
! Total flux subtracted in 200 components = -0.000244527 Jy
! Clean residual min=-0.001421 max=0.001467 Jy/beam
! Clean residual mean=-0.000000 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.155581 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 0.155581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063674Jy  sigma=1.334943
! Fit after  self-cal, rms=0.063686Jy  sigma=1.334884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123481 Jy
! Component: 100  -  total flux cleaned = 0.00160349 Jy
! Component: 150  -  total flux cleaned = 0.0017323 Jy
! Component: 200  -  total flux cleaned = 0.00182318 Jy
! Total flux subtracted in 200 components = 0.00182318 Jy
! Clean residual min=-0.001320 max=0.001339 Jy/beam
! Clean residual mean=-0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.157404 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 122 components and 0.157404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063660Jy  sigma=1.334226
! Fit after  self-cal, rms=0.063657Jy  sigma=1.334178
! Inverting map 
! Added new window around map position (22.6, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125674 Jy
! Component: 100  -  total flux cleaned = 0.00200589 Jy
! Component: 150  -  total flux cleaned = 0.00243729 Jy
! Component: 200  -  total flux cleaned = 0.00270665 Jy
! Total flux subtracted in 200 components = 0.00270665 Jy
! Clean residual min=-0.001216 max=0.001133 Jy/beam
! Clean residual mean=-0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.160111 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 145 components and 0.160111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063628Jy  sigma=1.333449
! Fit after  self-cal, rms=0.063623Jy  sigma=1.333365
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063623Jy  sigma=1.333365
! Fit after  self-cal, rms=0.063702Jy  sigma=1.333301
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.307 mas, bpa=16.84 degrees
! Estimated noise=0.214467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604966 Jy
! Component: 100  -  total flux cleaned = 0.000932593 Jy
! Component: 150  -  total flux cleaned = 0.00104159 Jy
! Component: 200  -  total flux cleaned = 0.00110824 Jy
! Total flux subtracted in 200 components = 0.00110824 Jy
! Clean residual min=-0.001192 max=0.001110 Jy/beam
! Clean residual mean=-0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.161219 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 160 components and 0.161219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063691Jy  sigma=1.333025
! Fit after  self-cal, rms=0.063690Jy  sigma=1.333006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295469 Jy
! Component: 100  -  total flux cleaned = 0.000372435 Jy
! Component: 150  -  total flux cleaned = 0.000443268 Jy
! Component: 200  -  total flux cleaned = 0.000469779 Jy
! Total flux subtracted in 200 components = 0.000469779 Jy
! Clean residual min=-0.001162 max=0.001091 Jy/beam
! Clean residual mean=-0.000000 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.161689 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 175 components and 0.161689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063684Jy  sigma=1.332859
! Fit after  self-cal, rms=0.063683Jy  sigma=1.332856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063683Jy  sigma=1.332856
! Fit after  self-cal, rms=0.063735Jy  sigma=1.332832
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.208 mas, bmaj=4.52 mas, bpa=7.117 degrees
! Estimated noise=0.248574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000293123 Jy
! Component: 100  -  total flux cleaned = 0.000389699 Jy
! Component: 150  -  total flux cleaned = 0.000458755 Jy
! Component: 200  -  total flux cleaned = 0.000483028 Jy
! Total flux subtracted in 200 components = 0.000483028 Jy
! Clean residual min=-0.000874 max=0.000807 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.162172 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 196 components and 0.162172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063732Jy  sigma=1.332730
! Fit after  self-cal, rms=0.063732Jy  sigma=1.332723
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175643 Jy
! Component: 100  -  total flux cleaned = 0.000197332 Jy
! Component: 150  -  total flux cleaned = 0.000218076 Jy
! Component: 200  -  total flux cleaned = 0.00021839 Jy
! Total flux subtracted in 200 components = 0.00021839 Jy
! Clean residual min=-0.000847 max=0.000813 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.16239 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 210 components and 0.16239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063730Jy  sigma=1.332671
! Fit after  self-cal, rms=0.063730Jy  sigma=1.332666
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.309 mas, bpa=16.84 degrees
! Estimated noise=0.214522 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.074 x 3.309 at 16.84 degrees (North through East)
! Clean map  min=-0.0010312  max=0.12489 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8358 mas, bmaj=2.852 mas, bpa=18.72 degrees
! Estimated noise=0.465368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0901359 Jy
! Component: 100  -  total flux cleaned = 0.116463 Jy
! Component: 150  -  total flux cleaned = 0.13068 Jy
! Component: 200  -  total flux cleaned = 0.138497 Jy
! Total flux subtracted in 200 components = 0.138497 Jy
! Clean residual min=-0.003258 max=0.003846 Jy/beam
! Clean residual mean=-0.000001 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.138497 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.138497 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.309 mas, bpa=16.84 degrees
! Estimated noise=0.214522 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613078 Jy
! Component: 100  -  total flux cleaned = 0.00953244 Jy
! Component: 150  -  total flux cleaned = 0.0119789 Jy
! Component: 200  -  total flux cleaned = 0.0138924 Jy
! Total flux subtracted in 200 components = 0.0138924 Jy
! Clean residual min=-0.001641 max=0.001420 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.152389 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 46 components and 0.152389 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.208 mas, bmaj=4.52 mas, bpa=7.117 degrees
! Estimated noise=0.248574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223929 Jy
! Component: 100  -  total flux cleaned = 0.00392385 Jy
! Component: 150  -  total flux cleaned = 0.0052703 Jy
! Component: 200  -  total flux cleaned = 0.00615265 Jy
! Total flux subtracted in 200 components = 0.00615265 Jy
! Clean residual min=-0.001207 max=0.001161 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.158542 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000697486 Jy
! Component: 100  -  total flux cleaned = 0.00122567 Jy
! Component: 150  -  total flux cleaned = 0.00159898 Jy
! Component: 200  -  total flux cleaned = 0.00194678 Jy
! Total flux subtracted in 200 components = 0.00194678 Jy
! Clean residual min=-0.000995 max=0.000842 Jy/beam
! Clean residual mean=-0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.160489 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 124 components and 0.160489 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.309 mas, bpa=16.84 degrees
! Estimated noise=0.214522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000517059 Jy
! Component: 100  -  total flux cleaned = 0.000872302 Jy
! Component: 150  -  total flux cleaned = 0.00114003 Jy
! Component: 200  -  total flux cleaned = 0.00132138 Jy
! Total flux subtracted in 200 components = 0.00132138 Jy
! Clean residual min=-0.001236 max=0.001056 Jy/beam
! Clean residual mean=-0.000000 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.16181 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 153 components and 0.16181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063749Jy  sigma=1.333036
! Fit after  self-cal, rms=0.063746Jy  sigma=1.332976
wmodel /J2034-1640_X_map.mod
! wmodel: Unable to open new model file: /J2034-1640_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2034-1640_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.074 x 3.309 at 16.84 degrees (North through East)
! Clean map  min=-0.0011033  max=0.12522 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2034-1640_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.125222 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000241233 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.577933 0.577933 1.15587 2.31173 4.62346 9.24692 18.4938 36.9877 73.9754
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  519.091 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2034-1640_X_dfm.log closed on Thu May 19 18:55:25 2016