! Started logfile: /scr/pima/bg219e_uvs/J2011-1546_X_dfm.log on Thu May 19 18:53:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2011-1546_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2011-1546_X_uva.fits
! AN table 1: 16 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.871528 visibilities/baseline/integration-bin.
! Found source: J2011-1546
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2011-1546_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.995107Jy  sigma=24.703146
! Fit after  self-cal, rms=0.744365Jy  sigma=9.373129
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8169 mas, bmaj=2.759 mas, bpa=20.96 degrees
! Estimated noise=1.17084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.32893 Jy
! Component: 100  -  total flux cleaned = 1.61872 Jy
! Total flux subtracted in 100 components = 1.61872 Jy
! Clean residual min=-0.029593 max=0.080829 Jy/beam
! Clean residual mean=-0.000089 rms=0.009222 Jy/beam
! Combined flux in latest and established models = 1.61872 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.61872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.183613Jy  sigma=2.246395
! Fit after  self-cal, rms=0.183605Jy  sigma=2.246311
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0767425 Jy
! Component: 100  -  total flux cleaned = 0.115604 Jy
! Total flux subtracted in 100 components = 0.115604 Jy
! Clean residual min=-0.026028 max=0.038442 Jy/beam
! Clean residual mean=-0.000050 rms=0.006176 Jy/beam
! Combined flux in latest and established models = 1.73432 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 1.73432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.137110Jy  sigma=1.670064
! Fit after  self-cal, rms=0.137103Jy  sigma=1.669940
! Inverting map 
! Added new window around map position (12.2, 16.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0352375 Jy
! Component: 100  -  total flux cleaned = 0.0577682 Jy
! Total flux subtracted in 100 components = 0.0577682 Jy
! Clean residual min=-0.021951 max=0.031044 Jy/beam
! Clean residual mean=-0.000035 rms=0.005222 Jy/beam
! Combined flux in latest and established models = 1.79209 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 38 components and 1.79209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124751Jy  sigma=1.533831
! Fit after  self-cal, rms=0.124175Jy  sigma=1.524451
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9949 mas, bmaj=3.026 mas, bpa=18.82 degrees
! Estimated noise=0.774369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242369 Jy
! Component: 100  -  total flux cleaned = 0.0400575 Jy
! Component: 150  -  total flux cleaned = 0.0517425 Jy
! Component: 200  -  total flux cleaned = 0.0587265 Jy
! Total flux subtracted in 200 components = 0.0587265 Jy
! Clean residual min=-0.017773 max=0.024611 Jy/beam
! Clean residual mean=-0.000025 rms=0.005127 Jy/beam
! Combined flux in latest and established models = 1.85082 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 62 components and 1.85082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117693Jy  sigma=1.455570
! Fit after  self-cal, rms=0.117571Jy  sigma=1.452745
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9949 x 3.026 at 18.82 degrees (North through East)
! Clean map  min=-0.018046  max=1.7084 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.98     
!   LA        1.01     NL        0.99     OV        0.97     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.04     KP        0.98     
!   LA        1.03     NL        1.01     OV        0.98     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.98     
!   LA        1.02     NL        0.97     OV        0.98     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.06     KP        0.99     
!   LA        1.01     NL        0.98     OV        1.00     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.03     KP        0.98     
!   LA        1.04     NL        0.99     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.99     
!   LA        1.03     NL        0.99     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.05     KP        0.98     
!   LA        1.03     NL        0.99     OV        0.99     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.04     KP        0.99     
!   LA        1.07     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.05     KP        0.99     
!   LA        1.05     NL        0.99     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.03     KP        0.98     
!   LA        1.09     NL        0.99     OV        1.00     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.06     KP        0.98     
!   LA        1.09     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.05     KP        0.99     
!   LA        1.09     NL        0.99     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.117571Jy  sigma=1.452745
! Fit after  self-cal, rms=0.104363Jy  sigma=1.244569
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9972 mas, bmaj=3.042 mas, bpa=18.94 degrees
! Estimated noise=0.772991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0140539 Jy
! Component: 100  -  total flux cleaned = -0.0207703 Jy
! Component: 150  -  total flux cleaned = -0.0236725 Jy
! Component: 200  -  total flux cleaned = -0.0249031 Jy
! Total flux subtracted in 200 components = -0.0249031 Jy
! Clean residual min=-0.014036 max=0.015019 Jy/beam
! Clean residual mean=-0.000003 rms=0.003370 Jy/beam
! Combined flux in latest and established models = 1.82592 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 1.82592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102255Jy  sigma=1.215877
! Fit after  self-cal, rms=0.102049Jy  sigma=1.213520
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102049Jy  sigma=1.213520
! Fit after  self-cal, rms=0.091145Jy  sigma=1.097691
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9969 mas, bmaj=3.034 mas, bpa=18.83 degrees
! Estimated noise=0.772224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00904349 Jy
! Component: 100  -  total flux cleaned = -0.0102017 Jy
! Component: 150  -  total flux cleaned = -0.0105252 Jy
! Component: 200  -  total flux cleaned = -0.0108066 Jy
! Total flux subtracted in 200 components = -0.0108066 Jy
! Clean residual min=-0.008104 max=0.010253 Jy/beam
! Clean residual mean=-0.000009 rms=0.001908 Jy/beam
! Combined flux in latest and established models = 1.81511 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 1.81511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090042Jy  sigma=1.084852
! Fit after  self-cal, rms=0.089911Jy  sigma=1.083444
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.4, 22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00857585 Jy
! Component: 100  -  total flux cleaned = 0.0084065 Jy
! Component: 150  -  total flux cleaned = 0.00874069 Jy
! Component: 200  -  total flux cleaned = 0.00903015 Jy
! Total flux subtracted in 200 components = 0.00903015 Jy
! Clean residual min=-0.008385 max=0.007256 Jy/beam
! Clean residual mean=-0.000005 rms=0.001701 Jy/beam
! Combined flux in latest and established models = 1.82414 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 109 components and 1.82414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088805Jy  sigma=1.071023
! Fit after  self-cal, rms=0.088753Jy  sigma=1.070308
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088753Jy  sigma=1.070308
! Fit after  self-cal, rms=0.088115Jy  sigma=1.065178
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9966 mas, bmaj=3.035 mas, bpa=18.86 degrees
! Estimated noise=0.771444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00329001 Jy
! Component: 100  -  total flux cleaned = -0.00389129 Jy
! Component: 150  -  total flux cleaned = -0.00416543 Jy
! Component: 200  -  total flux cleaned = -0.00405074 Jy
! Total flux subtracted in 200 components = -0.00405074 Jy
! Clean residual min=-0.006950 max=0.006619 Jy/beam
! Clean residual mean=-0.000004 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 1.82009 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 115 components and 1.82009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087525Jy  sigma=1.058134
! Fit after  self-cal, rms=0.087482Jy  sigma=1.057629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000623438 Jy
! Component: 100  -  total flux cleaned = -0.000418771 Jy
! Component: 150  -  total flux cleaned = -0.000226585 Jy
! Component: 200  -  total flux cleaned = 3.91927e-05 Jy
! Total flux subtracted in 200 components = 3.91927e-05 Jy
! Clean residual min=-0.006714 max=0.006278 Jy/beam
! Clean residual mean=-0.000004 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 1.82013 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 1.82013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087259Jy  sigma=1.055221
! Fit after  self-cal, rms=0.087252Jy  sigma=1.055138
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087252Jy  sigma=1.055138
! Fit after  self-cal, rms=0.086997Jy  sigma=1.053120
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.072 mas, bmaj=4.153 mas, bpa=8.345 degrees
! Estimated noise=0.958225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00247649 Jy
! Component: 100  -  total flux cleaned = -0.00315302 Jy
! Component: 150  -  total flux cleaned = -0.00364984 Jy
! Component: 200  -  total flux cleaned = -0.0040722 Jy
! Total flux subtracted in 200 components = -0.0040722 Jy
! Clean residual min=-0.007157 max=0.008605 Jy/beam
! Clean residual mean=-0.000006 rms=0.002057 Jy/beam
! Combined flux in latest and established models = 1.81606 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 139 components and 1.81606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086867Jy  sigma=1.051551
! Fit after  self-cal, rms=0.086854Jy  sigma=1.051379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000698422 Jy
! Component: 100  -  total flux cleaned = -0.000876556 Jy
! Component: 150  -  total flux cleaned = -0.0010032 Jy
! Component: 200  -  total flux cleaned = -0.00112228 Jy
! Total flux subtracted in 200 components = -0.00112228 Jy
! Clean residual min=-0.007059 max=0.008509 Jy/beam
! Clean residual mean=-0.000007 rms=0.002047 Jy/beam
! Combined flux in latest and established models = 1.81493 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 148 components and 1.81493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086807Jy  sigma=1.050944
! Fit after  self-cal, rms=0.086805Jy  sigma=1.050923
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9965 mas, bmaj=3.036 mas, bpa=18.88 degrees
! Estimated noise=0.771 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9965 x 3.036 at 18.88 degrees (North through East)
! Clean map  min=-0.0060347  max=1.7107 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086805Jy  sigma=1.050923
! Fit after  self-cal, rms=0.068385Jy  sigma=0.753794
! Inverting map and beam 
! Estimated beam: bmin=0.9965 mas, bmaj=3.038 mas, bpa=18.89 degrees
! Estimated noise=0.770087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0024919 Jy
! Component: 100  -  total flux cleaned = -0.00350228 Jy
! Component: 150  -  total flux cleaned = -0.00381771 Jy
! Component: 200  -  total flux cleaned = -0.00395695 Jy
! Total flux subtracted in 200 components = -0.00395695 Jy
! Clean residual min=-0.004557 max=0.004720 Jy/beam
! Clean residual mean=-0.000006 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 1.81098 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 157 components and 1.81098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068153Jy  sigma=0.750529
! Fit after  self-cal, rms=0.068140Jy  sigma=0.750336
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000779231 Jy
! Component: 100  -  total flux cleaned = -0.00102665 Jy
! Component: 150  -  total flux cleaned = -0.00108423 Jy
! Component: 200  -  total flux cleaned = -0.00113733 Jy
! Total flux subtracted in 200 components = -0.00113733 Jy
! Clean residual min=-0.004363 max=0.004605 Jy/beam
! Clean residual mean=-0.000006 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 1.80984 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 167 components and 1.80984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068049Jy  sigma=0.749130
! Fit after  self-cal, rms=0.068045Jy  sigma=0.749079
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068045Jy  sigma=0.749079
! Fit after  self-cal, rms=0.067877Jy  sigma=0.747913
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8162 mas, bmaj=2.771 mas, bpa=21.03 degrees
! Estimated noise=1.16803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.32569 Jy
! Component: 100  -  total flux cleaned = 1.61481 Jy
! Component: 150  -  total flux cleaned = 1.69115 Jy
! Component: 200  -  total flux cleaned = 1.72562 Jy
! Total flux subtracted in 200 components = 1.72562 Jy
! Clean residual min=-0.009527 max=0.015614 Jy/beam
! Clean residual mean=-0.000030 rms=0.002491 Jy/beam
! Combined flux in latest and established models = 1.72562 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.72562 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9963 mas, bmaj=3.039 mas, bpa=18.89 degrees
! Estimated noise=0.769678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237428 Jy
! Component: 100  -  total flux cleaned = 0.0374899 Jy
! Component: 150  -  total flux cleaned = 0.0475212 Jy
! Component: 200  -  total flux cleaned = 0.0553062 Jy
! Total flux subtracted in 200 components = 0.0553062 Jy
! Clean residual min=-0.006333 max=0.005844 Jy/beam
! Clean residual mean=-0.000013 rms=0.001461 Jy/beam
! Combined flux in latest and established models = 1.78092 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 59 components and 1.78092 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.074 mas, bmaj=4.15 mas, bpa=8.382 degrees
! Estimated noise=0.956296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00868281 Jy
! Component: 100  -  total flux cleaned = 0.0144457 Jy
! Component: 150  -  total flux cleaned = 0.0170961 Jy
! Component: 200  -  total flux cleaned = 0.0189625 Jy
! Total flux subtracted in 200 components = 0.0189625 Jy
! Clean residual min=-0.005949 max=0.005881 Jy/beam
! Clean residual mean=-0.000013 rms=0.001653 Jy/beam
! Combined flux in latest and established models = 1.79989 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000947686 Jy
! Component: 100  -  total flux cleaned = 0.00175899 Jy
! Component: 150  -  total flux cleaned = 0.00236929 Jy
! Component: 200  -  total flux cleaned = 0.0029757 Jy
! Total flux subtracted in 200 components = 0.0029757 Jy
! Clean residual min=-0.005382 max=0.005215 Jy/beam
! Clean residual mean=-0.000011 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 1.80286 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 133 components and 1.80286 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9963 mas, bmaj=3.039 mas, bpa=18.89 degrees
! Estimated noise=0.769678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010723 Jy
! Component: 100  -  total flux cleaned = 0.00097876 Jy
! Component: 150  -  total flux cleaned = 0.00107116 Jy
! Component: 200  -  total flux cleaned = 0.00115496 Jy
! Total flux subtracted in 200 components = 0.00115496 Jy
! Clean residual min=-0.004312 max=0.004055 Jy/beam
! Clean residual mean=-0.000006 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 1.80402 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 150 components and 1.80402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067887Jy  sigma=0.747864
! Fit after  self-cal, rms=0.067830Jy  sigma=0.746992
wmodel /J2011-1546_X_map.mod
! wmodel: Unable to open new model file: /J2011-1546_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2011-1546_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9963 x 3.039 at 18.89 degrees (North through East)
! Clean map  min=-0.0044976  max=1.7089 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2011-1546_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.70894 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0010674 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.18738 0.18738 0.374759 0.749519 1.49904 2.99807 5.99615 11.9923 23.9846 47.9692 95.9384
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.708 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1601.03 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2011-1546_X_dfm.log closed on Thu May 19 18:53:40 2016