! Started logfile: /scr/pima/bg219e_uvs/J2001+2416_X_dfm.log on Thu May 19 18:52:54 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J2001+2416_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J2001+2416_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881614 visibilities/baseline/integration-bin.
! Found source: J2001+2416
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2001+2416_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.030325Jy  sigma=23.680329
! Fit after  self-cal, rms=0.768005Jy  sigma=17.499673
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.062 mas, bpa=32.24 degrees
! Estimated noise=0.494847 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182128 Jy
! Component: 100  -  total flux cleaned = 0.223808 Jy
! Total flux subtracted in 100 components = 0.223808 Jy
! Clean residual min=-0.007043 max=0.015949 Jy/beam
! Clean residual mean=0.000012 rms=0.002081 Jy/beam
! Combined flux in latest and established models = 0.223808 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.223808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070909Jy  sigma=1.535332
! Fit after  self-cal, rms=0.070890Jy  sigma=1.534982
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171519 Jy
! Component: 100  -  total flux cleaned = 0.0263305 Jy
! Total flux subtracted in 100 components = 0.0263305 Jy
! Clean residual min=-0.004741 max=0.007114 Jy/beam
! Clean residual mean=0.000004 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 0.250139 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.250139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066655Jy  sigma=1.415144
! Fit after  self-cal, rms=0.066631Jy  sigma=1.414542
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.318 mas, bmaj=2.195 mas, bpa=27.12 degrees
! Estimated noise=0.255563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833115 Jy
! Component: 100  -  total flux cleaned = 0.0134892 Jy
! Component: 150  -  total flux cleaned = 0.0169876 Jy
! Component: 200  -  total flux cleaned = 0.0193868 Jy
! Total flux subtracted in 200 components = 0.0193868 Jy
! Clean residual min=-0.003715 max=0.005815 Jy/beam
! Clean residual mean=0.000001 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.269526 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 44 components and 0.269526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065527Jy  sigma=1.384355
! Fit after  self-cal, rms=0.065533Jy  sigma=1.384290
! Inverting map 
! Added new window around map position (-2, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00496158 Jy
! Component: 100  -  total flux cleaned = 0.00585262 Jy
! Component: 150  -  total flux cleaned = 0.00639405 Jy
! Component: 200  -  total flux cleaned = 0.00687738 Jy
! Total flux subtracted in 200 components = 0.00687738 Jy
! Clean residual min=-0.003183 max=0.004371 Jy/beam
! Clean residual mean=0.000002 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.276403 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 66 components and 0.276403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064986Jy  sigma=1.375327
! Fit after  self-cal, rms=0.064953Jy  sigma=1.374208
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.318 x 2.195 at 27.12 degrees (North through East)
! Clean map  min=-0.0030047  max=0.23515 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.99     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        0.98     
!   LA        1.01     NL        0.98     OV        0.98     PT        0.99     
!   SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.99     KP        0.97     
!   LA        0.97     NL        0.97     OV        1.00     PT        1.01     
!   SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.98     NL        0.99     OV        0.98     PT        1.00     
!   SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.01     NL        1.01     OV        1.02     PT        0.97     
!   SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.99     NL        0.97     OV        1.00     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.98     NL        0.98     OV        1.00     PT        0.96     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.98     NL        0.99     OV        0.99     PT        1.00     
!   SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.98     NL        0.98     OV        0.99     PT        1.01     
!   SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.98     
!   LA        0.98     NL        0.98     OV        1.00     PT        1.00     
!   SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.98     NL        0.97     OV        0.99     PT        0.99     
!   SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.97     NL        1.01     OV        1.01     PT        1.03     
!   SC        1.08     
! 
! 
! Fit before self-cal, rms=0.064953Jy  sigma=1.374208
! Fit after  self-cal, rms=0.064981Jy  sigma=1.361048
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.342 mas, bmaj=2.197 mas, bpa=26.58 degrees
! Estimated noise=0.254661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109074 Jy
! Component: 100  -  total flux cleaned = -0.000499702 Jy
! Component: 150  -  total flux cleaned = -9.6508e-05 Jy
! Component: 200  -  total flux cleaned = -4.04514e-05 Jy
! Total flux subtracted in 200 components = -4.04514e-05 Jy
! Clean residual min=-0.002751 max=0.003271 Jy/beam
! Clean residual mean=0.000002 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.276363 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.276363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064741Jy  sigma=1.356525
! Fit after  self-cal, rms=0.064756Jy  sigma=1.356165
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064756Jy  sigma=1.356165
! Fit after  self-cal, rms=0.065122Jy  sigma=1.342930
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.332 mas, bmaj=2.197 mas, bpa=26.97 degrees
! Estimated noise=0.253906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382512 Jy
! Component: 100  -  total flux cleaned = 0.000894582 Jy
! Component: 150  -  total flux cleaned = 0.000964914 Jy
! Component: 200  -  total flux cleaned = 0.00091423 Jy
! Total flux subtracted in 200 components = 0.00091423 Jy
! Clean residual min=-0.001826 max=0.002101 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.277277 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 100 components and 0.277277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065080Jy  sigma=1.341594
! Fit after  self-cal, rms=0.065102Jy  sigma=1.341450
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.61616e-05 Jy
! Component: 100  -  total flux cleaned = -0.000443146 Jy
! Component: 150  -  total flux cleaned = -0.000651739 Jy
! Component: 200  -  total flux cleaned = -0.00075136 Jy
! Total flux subtracted in 200 components = -0.00075136 Jy
! Clean residual min=-0.001559 max=0.001702 Jy/beam
! Clean residual mean=0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.276525 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.276525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065009Jy  sigma=1.339412
! Fit after  self-cal, rms=0.065011Jy  sigma=1.339326
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065011Jy  sigma=1.339326
! Fit after  self-cal, rms=0.064991Jy  sigma=1.339248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.332 mas, bmaj=2.197 mas, bpa=26.97 degrees
! Estimated noise=0.253942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027374 Jy
! Component: 100  -  total flux cleaned = 0.000364124 Jy
! Component: 150  -  total flux cleaned = 0.000338369 Jy
! Component: 200  -  total flux cleaned = 0.000263997 Jy
! Total flux subtracted in 200 components = 0.000263997 Jy
! Clean residual min=-0.001572 max=0.001634 Jy/beam
! Clean residual mean=0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.276789 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 138 components and 0.276789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064964Jy  sigma=1.338709
! Fit after  self-cal, rms=0.064965Jy  sigma=1.338691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.23579e-05 Jy
! Component: 100  -  total flux cleaned = -1.8616e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010742 Jy
! Component: 200  -  total flux cleaned = -0.000170371 Jy
! Total flux subtracted in 200 components = -0.000170371 Jy
! Clean residual min=-0.001570 max=0.001566 Jy/beam
! Clean residual mean=0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.276619 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 149 components and 0.276619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064950Jy  sigma=1.338375
! Fit after  self-cal, rms=0.064951Jy  sigma=1.338367
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064951Jy  sigma=1.338367
! Fit after  self-cal, rms=0.065212Jy  sigma=1.337270
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.398 mas, bmaj=2.698 mas, bpa=0.8754 degrees
! Estimated noise=0.282254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367908 Jy
! Component: 100  -  total flux cleaned = -0.000657041 Jy
! Component: 150  -  total flux cleaned = -0.000809569 Jy
! Component: 200  -  total flux cleaned = -0.000853812 Jy
! Total flux subtracted in 200 components = -0.000853812 Jy
! Clean residual min=-0.001343 max=0.001318 Jy/beam
! Clean residual mean=0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.275765 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 175 components and 0.275765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065205Jy  sigma=1.337080
! Fit after  self-cal, rms=0.065219Jy  sigma=1.337052
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.18267e-05 Jy
! Component: 100  -  total flux cleaned = -3.81761e-05 Jy
! Component: 150  -  total flux cleaned = -6.18605e-05 Jy
! Component: 200  -  total flux cleaned = -9.53476e-05 Jy
! Total flux subtracted in 200 components = -9.53476e-05 Jy
! Clean residual min=-0.001381 max=0.001293 Jy/beam
! Clean residual mean=0.000003 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.27567 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 185 components and 0.27567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065215Jy  sigma=1.336956
! Fit after  self-cal, rms=0.065216Jy  sigma=1.336948
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.332 mas, bmaj=2.198 mas, bpa=27.01 degrees
! Estimated noise=0.254084 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.332 x 2.198 at 27.01 degrees (North through East)
! Clean map  min=-0.0018269  max=0.23317 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.062 mas, bpa=32.23 degrees
! Estimated noise=0.496129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182544 Jy
! Component: 100  -  total flux cleaned = 0.224303 Jy
! Component: 150  -  total flux cleaned = 0.24137 Jy
! Component: 200  -  total flux cleaned = 0.250677 Jy
! Total flux subtracted in 200 components = 0.250677 Jy
! Clean residual min=-0.003140 max=0.004995 Jy/beam
! Clean residual mean=0.000002 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.250677 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.250677 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.332 mas, bmaj=2.198 mas, bpa=27.01 degrees
! Estimated noise=0.254084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00686999 Jy
! Component: 100  -  total flux cleaned = 0.0112835 Jy
! Component: 150  -  total flux cleaned = 0.013845 Jy
! Component: 200  -  total flux cleaned = 0.0159366 Jy
! Total flux subtracted in 200 components = 0.0159366 Jy
! Clean residual min=-0.001948 max=0.002317 Jy/beam
! Clean residual mean=0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.266613 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 46 components and 0.266614 Jy
! Inverting map 
! Added new window around map position (35.2, 26.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207257 Jy
! Component: 100  -  total flux cleaned = 0.00332987 Jy
! Component: 150  -  total flux cleaned = 0.004215 Jy
! Component: 200  -  total flux cleaned = 0.00474904 Jy
! Total flux subtracted in 200 components = 0.00474904 Jy
! Clean residual min=-0.001660 max=0.001837 Jy/beam
! Clean residual mean=0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.271363 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 68 components and 0.271362 Jy
! Inverting map 
! Added new window around map position (8.4, 15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308998 Jy
! Component: 100  -  total flux cleaned = 0.000460463 Jy
! Component: 150  -  total flux cleaned = 0.000693062 Jy
! Component: 200  -  total flux cleaned = 0.000780522 Jy
! Total flux subtracted in 200 components = 0.000780522 Jy
! Clean residual min=-0.001540 max=0.001545 Jy/beam
! Clean residual mean=0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.272143 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 93 components and 0.272143 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.398 mas, bmaj=2.698 mas, bpa=0.8754 degrees
! Estimated noise=0.282254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000921056 Jy
! Component: 100  -  total flux cleaned = 0.00130307 Jy
! Component: 150  -  total flux cleaned = 0.00166602 Jy
! Component: 200  -  total flux cleaned = 0.00187077 Jy
! Total flux subtracted in 200 components = 0.00187077 Jy
! Clean residual min=-0.001438 max=0.001431 Jy/beam
! Clean residual mean=0.000002 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.274014 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159056 Jy
! Component: 100  -  total flux cleaned = 0.000256493 Jy
! Component: 150  -  total flux cleaned = 0.000300808 Jy
! Component: 200  -  total flux cleaned = 0.000280343 Jy
! Total flux subtracted in 200 components = 0.000280343 Jy
! Clean residual min=-0.001381 max=0.001363 Jy/beam
! Clean residual mean=0.000003 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.274294 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 164 components and 0.274294 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.332 mas, bmaj=2.198 mas, bpa=27.01 degrees
! Estimated noise=0.254084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000534309 Jy
! Component: 100  -  total flux cleaned = -0.00075079 Jy
! Component: 150  -  total flux cleaned = -0.000948412 Jy
! Component: 200  -  total flux cleaned = -0.00107922 Jy
! Total flux subtracted in 200 components = -0.00107922 Jy
! Clean residual min=-0.001383 max=0.001372 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.273215 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 185 components and 0.273215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065173Jy  sigma=1.335760
! Fit after  self-cal, rms=0.065159Jy  sigma=1.335540
wmodel /J2001+2416_X_map.mod
! wmodel: Unable to open new model file: /J2001+2416_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J2001+2416_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.332 x 2.198 at 27.01 degrees (North through East)
! Clean map  min=-0.0019763  max=0.23344 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J2001+2416_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.233445 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000330853 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.42518 0.42518 0.850361 1.70072 3.40144 6.80288 13.6058 27.2115 54.4231
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.233 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  705.583 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J2001+2416_X_dfm.log closed on Thu May 19 18:52:58 2016