! Started logfile: /scr/pima/bg219e_uvs/J1959+6508_X_dfm.log on Thu May 19 18:52:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1959+6508_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1959+6508_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.909188 visibilities/baseline/integration-bin.
! Found source: J1959+6508
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20424 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1959+6508_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018099Jy  sigma=24.082953
! Fit after  self-cal, rms=0.827585Jy  sigma=19.476528
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=1.311 mas, bpa=88.92 degrees
! Estimated noise=0.558775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126355 Jy
! Component: 100  -  total flux cleaned = 0.163276 Jy
! Total flux subtracted in 100 components = 0.163276 Jy
! Clean residual min=-0.005637 max=0.014358 Jy/beam
! Clean residual mean=-0.000005 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.163276 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.163276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067804Jy  sigma=1.533138
! Fit after  self-cal, rms=0.067777Jy  sigma=1.531789
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149216 Jy
! Component: 100  -  total flux cleaned = 0.023004 Jy
! Total flux subtracted in 100 components = 0.023004 Jy
! Clean residual min=-0.003819 max=0.004062 Jy/beam
! Clean residual mean=-0.000002 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.18628 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 0.18628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063052Jy  sigma=1.406514
! Fit after  self-cal, rms=0.063020Jy  sigma=1.405449
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.36 mas, bmaj=1.61 mas, bpa=-78.37 degrees
! Estimated noise=0.225281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00845483 Jy
! Component: 100  -  total flux cleaned = 0.0130344 Jy
! Component: 150  -  total flux cleaned = 0.0159105 Jy
! Component: 200  -  total flux cleaned = 0.0177544 Jy
! Total flux subtracted in 200 components = 0.0177544 Jy
! Clean residual min=-0.002709 max=0.005041 Jy/beam
! Clean residual mean=-0.000002 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.204034 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 43 components and 0.204034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061914Jy  sigma=1.376437
! Fit after  self-cal, rms=0.061913Jy  sigma=1.376204
! Inverting map 
! Added new window around map position (-0.4, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00498254 Jy
! Component: 100  -  total flux cleaned = 0.00785159 Jy
! Component: 150  -  total flux cleaned = 0.00981612 Jy
! Component: 200  -  total flux cleaned = 0.0113125 Jy
! Total flux subtracted in 200 components = 0.0113125 Jy
! Clean residual min=-0.001946 max=0.002023 Jy/beam
! Clean residual mean=-0.000002 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.215346 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 86 components and 0.215346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061480Jy  sigma=1.365514
! Fit after  self-cal, rms=0.061441Jy  sigma=1.364696
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.36 x 1.61 at -78.37 degrees (North through East)
! Clean map  min=-0.0019394  max=0.17154 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.03     KP        0.99     
!   LA        0.97     NL        1.01     OV        0.99     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.97     NL        0.99     OV        0.99     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        0.99     
!   LA        0.98     NL        1.03     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.05     KP        0.98     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.03     KP        0.98     
!   LA        0.97     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.03     KP        0.99     
!   LA        0.96     NL        1.01     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.98     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.02     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.97     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.04     KP        0.98     
!   LA        1.01     NL        1.01     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.99     NL        1.02     OV        0.96     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.98     NL        1.03     OV        0.99     PT        1.03     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061441Jy  sigma=1.364696
! Fit after  self-cal, rms=0.061475Jy  sigma=1.360477
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.36 mas, bmaj=1.609 mas, bpa=-78.41 degrees
! Estimated noise=0.225327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014192 Jy
! Component: 100  -  total flux cleaned = 0.00223249 Jy
! Component: 150  -  total flux cleaned = 0.002566 Jy
! Component: 200  -  total flux cleaned = 0.00269841 Jy
! Total flux subtracted in 200 components = 0.00269841 Jy
! Clean residual min=-0.001708 max=0.001570 Jy/beam
! Clean residual mean=-0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.218045 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.218045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061434Jy  sigma=1.359521
! Fit after  self-cal, rms=0.061432Jy  sigma=1.359373
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061432Jy  sigma=1.359373
! Fit after  self-cal, rms=0.061345Jy  sigma=1.355547
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.357 mas, bmaj=1.608 mas, bpa=-79.06 degrees
! Estimated noise=0.225336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560003 Jy
! Component: 100  -  total flux cleaned = 0.000795358 Jy
! Component: 150  -  total flux cleaned = 0.000931494 Jy
! Component: 200  -  total flux cleaned = 0.00102461 Jy
! Total flux subtracted in 200 components = 0.00102461 Jy
! Clean residual min=-0.001520 max=0.001353 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.219069 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 0.219069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061336Jy  sigma=1.355343
! Fit after  self-cal, rms=0.061340Jy  sigma=1.355302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185296 Jy
! Component: 100  -  total flux cleaned = 0.00030336 Jy
! Component: 150  -  total flux cleaned = 0.000369934 Jy
! Component: 200  -  total flux cleaned = 0.000422186 Jy
! Total flux subtracted in 200 components = 0.000422186 Jy
! Clean residual min=-0.001542 max=0.001352 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.219492 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 116 components and 0.219492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061337Jy  sigma=1.355226
! Fit after  self-cal, rms=0.061336Jy  sigma=1.355222
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061336Jy  sigma=1.355222
! Fit after  self-cal, rms=0.061359Jy  sigma=1.355178
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.358 mas, bmaj=1.608 mas, bpa=-79.18 degrees
! Estimated noise=0.225325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177748 Jy
! Component: 100  -  total flux cleaned = 0.000296605 Jy
! Component: 150  -  total flux cleaned = 0.000364344 Jy
! Component: 200  -  total flux cleaned = 0.000410487 Jy
! Total flux subtracted in 200 components = 0.000410487 Jy
! Clean residual min=-0.001551 max=0.001313 Jy/beam
! Clean residual mean=-0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.219902 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 118 components and 0.219902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061356Jy  sigma=1.355118
! Fit after  self-cal, rms=0.061356Jy  sigma=1.355115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.49303e-05 Jy
! Component: 100  -  total flux cleaned = 0.000136151 Jy
! Component: 150  -  total flux cleaned = 0.000156288 Jy
! Component: 200  -  total flux cleaned = 0.000175415 Jy
! Total flux subtracted in 200 components = 0.000175415 Jy
! Clean residual min=-0.001559 max=0.001314 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.220078 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 120 components and 0.220078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061354Jy  sigma=1.355078
! Fit after  self-cal, rms=0.061354Jy  sigma=1.355077
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061354Jy  sigma=1.355077
! Fit after  self-cal, rms=0.061387Jy  sigma=1.355061
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.373 mas, bmaj=2.656 mas, bpa=-72.75 degrees
! Estimated noise=0.262334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000496741 Jy
! Component: 100  -  total flux cleaned = 0.000584237 Jy
! Component: 150  -  total flux cleaned = 0.00060905 Jy
! Component: 200  -  total flux cleaned = 0.000630771 Jy
! Total flux subtracted in 200 components = 0.000630771 Jy
! Clean residual min=-0.001808 max=0.001504 Jy/beam
! Clean residual mean=-0.000002 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.220708 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 122 components and 0.220708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061387Jy  sigma=1.355055
! Fit after  self-cal, rms=0.061387Jy  sigma=1.355044
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115793 Jy
! Component: 100  -  total flux cleaned = 0.000141526 Jy
! Component: 150  -  total flux cleaned = 0.000159057 Jy
! Component: 200  -  total flux cleaned = 0.00018041 Jy
! Total flux subtracted in 200 components = 0.00018041 Jy
! Clean residual min=-0.001806 max=0.001473 Jy/beam
! Clean residual mean=-0.000002 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.220889 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 127 components and 0.220889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061388Jy  sigma=1.355054
! Fit after  self-cal, rms=0.061388Jy  sigma=1.355054
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.358 mas, bmaj=1.608 mas, bpa=-79.24 degrees
! Estimated noise=0.225368 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.358 x 1.608 at -79.24 degrees (North through East)
! Clean map  min=-0.0015305  max=0.17118 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=1.311 mas, bpa=88.14 degrees
! Estimated noise=0.559814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126623 Jy
! Component: 100  -  total flux cleaned = 0.164355 Jy
! Component: 150  -  total flux cleaned = 0.179511 Jy
! Component: 200  -  total flux cleaned = 0.187712 Jy
! Total flux subtracted in 200 components = 0.187712 Jy
! Clean residual min=-0.003609 max=0.004093 Jy/beam
! Clean residual mean=-0.000001 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.187712 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.187712 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.358 mas, bmaj=1.608 mas, bpa=-79.24 degrees
! Estimated noise=0.225368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00806486 Jy
! Component: 100  -  total flux cleaned = 0.0132933 Jy
! Component: 150  -  total flux cleaned = 0.0171182 Jy
! Component: 200  -  total flux cleaned = 0.020078 Jy
! Total flux subtracted in 200 components = 0.020078 Jy
! Clean residual min=-0.001902 max=0.001842 Jy/beam
! Clean residual mean=-0.000001 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.20779 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 81 components and 0.20779 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.373 mas, bmaj=2.656 mas, bpa=-72.75 degrees
! Estimated noise=0.262334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381788 Jy
! Component: 100  -  total flux cleaned = 0.00635437 Jy
! Component: 150  -  total flux cleaned = 0.00814776 Jy
! Component: 200  -  total flux cleaned = 0.00944103 Jy
! Total flux subtracted in 200 components = 0.00944103 Jy
! Clean residual min=-0.001993 max=0.001331 Jy/beam
! Clean residual mean=-0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.217231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000937609 Jy
! Component: 100  -  total flux cleaned = 0.00162014 Jy
! Component: 150  -  total flux cleaned = 0.00211852 Jy
! Component: 200  -  total flux cleaned = 0.00248324 Jy
! Total flux subtracted in 200 components = 0.00248324 Jy
! Clean residual min=-0.001865 max=0.001389 Jy/beam
! Clean residual mean=-0.000002 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.219714 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 152 components and 0.219714 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.358 mas, bmaj=1.608 mas, bpa=-79.24 degrees
! Estimated noise=0.225368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251498 Jy
! Component: 100  -  total flux cleaned = 0.000269955 Jy
! Component: 150  -  total flux cleaned = 0.000286056 Jy
! Component: 200  -  total flux cleaned = 0.000285968 Jy
! Total flux subtracted in 200 components = 0.000285968 Jy
! Clean residual min=-0.001587 max=0.001276 Jy/beam
! Clean residual mean=-0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.22 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 167 components and 0.22 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061383Jy  sigma=1.355013
! Fit after  self-cal, rms=0.061381Jy  sigma=1.354975
wmodel /J1959+6508_X_map.mod
! wmodel: Unable to open new model file: /J1959+6508_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1959+6508_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.358 x 1.608 at -79.24 degrees (North through East)
! Clean map  min=-0.0015333  max=0.172 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1959+6508_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.172003 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000298578 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.520765 0.520765 1.04153 2.08306 4.16612 8.33225 16.6645 33.329 66.658
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.172 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  576.075 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1959+6508_X_dfm.log closed on Thu May 19 18:52:49 2016