! Started logfile: /scr/pima/bg219e_uvs/J1951-0509_S_dfm.log on Thu May 19 18:52:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1951-0509_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1951-0509_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.784722 visibilities/baseline/integration-bin.
! Found source: J1951-0509
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3164 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1951-0509_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015475Jy  sigma=20.463251
! Fit after  self-cal, rms=0.901593Jy  sigma=18.198747
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.215 mas, bmaj=9.854 mas, bpa=18.19 degrees
! Estimated noise=0.908312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765314 Jy
! Component: 100  -  total flux cleaned = 0.0934673 Jy
! Total flux subtracted in 100 components = 0.0934673 Jy
! Clean residual min=-0.004789 max=0.005615 Jy/beam
! Clean residual mean=0.000002 rms=0.001334 Jy/beam
! Combined flux in latest and established models = 0.0934673 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0934673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088195Jy  sigma=1.313899
! Fit after  self-cal, rms=0.087706Jy  sigma=1.303588
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.85 mas, bmaj=10.72 mas, bpa=16.68 degrees
! Estimated noise=0.715448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00765453 Jy
! Component: 100  -  total flux cleaned = 0.0112114 Jy
! Component: 150  -  total flux cleaned = 0.0132432 Jy
! Component: 200  -  total flux cleaned = 0.0144984 Jy
! Total flux subtracted in 200 components = 0.0144984 Jy
! Clean residual min=-0.003492 max=0.004092 Jy/beam
! Clean residual mean=-0.000003 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.107966 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 38 components and 0.107966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086861Jy  sigma=1.287788
! Fit after  self-cal, rms=0.086803Jy  sigma=1.287473
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.85 x 10.72 at 16.68 degrees (North through East)
! Clean map  min=-0.0034267  max=0.10063 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.08     KP        1.00     
!   LA        1.05     NL        1.01     OV        0.98     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.03     HN        0.98     KP        1.00     
!   LA        1.02     NL        0.93     OV        1.07     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        0.98     
!   LA        1.10     NL        1.04     OV        0.98     PT        0.96     
!   SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        0.92     KP        1.01     
!   LA        0.98     NL        1.01     OV        1.04     PT        0.98     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.086803Jy  sigma=1.287473
! Fit after  self-cal, rms=0.086258Jy  sigma=1.281958
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.859 mas, bmaj=10.72 mas, bpa=16.69 degrees
! Estimated noise=0.71681 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547327 Jy
! Component: 100  -  total flux cleaned = 0.000935497 Jy
! Component: 150  -  total flux cleaned = 0.00112743 Jy
! Component: 200  -  total flux cleaned = 0.0012647 Jy
! Total flux subtracted in 200 components = 0.0012647 Jy
! Clean residual min=-0.003494 max=0.003569 Jy/beam
! Clean residual mean=-0.000000 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.10923 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 45 components and 0.10923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086207Jy  sigma=1.281542
! Fit after  self-cal, rms=0.086308Jy  sigma=1.281252
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086308Jy  sigma=1.281252
! Fit after  self-cal, rms=0.089990Jy  sigma=1.277821
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.874 mas, bmaj=10.74 mas, bpa=16.62 degrees
! Estimated noise=0.728306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000923728 Jy
! Component: 100  -  total flux cleaned = 0.00120449 Jy
! Component: 150  -  total flux cleaned = 0.00135671 Jy
! Component: 200  -  total flux cleaned = 0.00147697 Jy
! Total flux subtracted in 200 components = 0.00147697 Jy
! Clean residual min=-0.003550 max=0.003377 Jy/beam
! Clean residual mean=-0.000003 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.110707 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.110707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089897Jy  sigma=1.277578
! Fit after  self-cal, rms=0.089862Jy  sigma=1.277382
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.99183e-05 Jy
! Component: 100  -  total flux cleaned = 0.000138051 Jy
! Component: 150  -  total flux cleaned = 0.000235821 Jy
! Component: 200  -  total flux cleaned = 0.000317466 Jy
! Total flux subtracted in 200 components = 0.000317466 Jy
! Clean residual min=-0.003464 max=0.003391 Jy/beam
! Clean residual mean=-0.000003 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.111025 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.111025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089838Jy  sigma=1.277294
! Fit after  self-cal, rms=0.089851Jy  sigma=1.277233
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089851Jy  sigma=1.277233
! Fit after  self-cal, rms=0.090662Jy  sigma=1.276735
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.881 mas, bmaj=10.75 mas, bpa=16.61 degrees
! Estimated noise=0.73974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135956 Jy
! Component: 100  -  total flux cleaned = 0.00156998 Jy
! Component: 150  -  total flux cleaned = 0.00164605 Jy
! Component: 200  -  total flux cleaned = 0.00170966 Jy
! Total flux subtracted in 200 components = 0.00170966 Jy
! Clean residual min=-0.003538 max=0.003471 Jy/beam
! Clean residual mean=-0.000004 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.112734 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.112734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090581Jy  sigma=1.276651
! Fit after  self-cal, rms=0.090600Jy  sigma=1.276604
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.35445e-05 Jy
! Component: 100  -  total flux cleaned = 0.000105757 Jy
! Component: 150  -  total flux cleaned = 0.000161532 Jy
! Component: 200  -  total flux cleaned = 0.000199692 Jy
! Total flux subtracted in 200 components = 0.000199692 Jy
! Clean residual min=-0.003477 max=0.003462 Jy/beam
! Clean residual mean=-0.000004 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.112934 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.112934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090585Jy  sigma=1.276550
! Fit after  self-cal, rms=0.090599Jy  sigma=1.276519
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090599Jy  sigma=1.276519
! Fit after  self-cal, rms=0.091330Jy  sigma=1.276121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.353 mas, bmaj=13.37 mas, bpa=6.899 degrees
! Estimated noise=0.86911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125993 Jy
! Component: 100  -  total flux cleaned = 0.0016967 Jy
! Component: 150  -  total flux cleaned = 0.00174681 Jy
! Component: 200  -  total flux cleaned = 0.00175469 Jy
! Total flux subtracted in 200 components = 0.00175469 Jy
! Clean residual min=-0.003372 max=0.004196 Jy/beam
! Clean residual mean=-0.000007 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.114689 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.114689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091261Jy  sigma=1.276174
! Fit after  self-cal, rms=0.091264Jy  sigma=1.276147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.8178e-05 Jy
! Component: 100  -  total flux cleaned = 2.33661e-05 Jy
! Component: 150  -  total flux cleaned = 9.15286e-06 Jy
! Component: 200  -  total flux cleaned = 8.90803e-06 Jy
! Total flux subtracted in 200 components = 8.90803e-06 Jy
! Clean residual min=-0.003351 max=0.004204 Jy/beam
! Clean residual mean=-0.000007 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.114698 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 0.114698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091257Jy  sigma=1.276118
! Fit after  self-cal, rms=0.091259Jy  sigma=1.276111
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.886 mas, bmaj=10.76 mas, bpa=16.59 degrees
! Estimated noise=0.750514 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.886 x 10.76 at 16.59 degrees (North through East)
! Clean map  min=-0.0034177  max=0.10455 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.237 mas, bmaj=9.86 mas, bpa=18.09 degrees
! Estimated noise=0.961864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0812679 Jy
! Component: 100  -  total flux cleaned = 0.0993864 Jy
! Component: 150  -  total flux cleaned = 0.105591 Jy
! Component: 200  -  total flux cleaned = 0.10923 Jy
! Total flux subtracted in 200 components = 0.10923 Jy
! Clean residual min=-0.004610 max=0.005119 Jy/beam
! Clean residual mean=-0.000001 rms=0.001245 Jy/beam
! Combined flux in latest and established models = 0.10923 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.10923 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.886 mas, bmaj=10.76 mas, bpa=16.59 degrees
! Estimated noise=0.750514 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238839 Jy
! Component: 100  -  total flux cleaned = 0.00316983 Jy
! Component: 150  -  total flux cleaned = 0.00364828 Jy
! Component: 200  -  total flux cleaned = 0.00391583 Jy
! Total flux subtracted in 200 components = 0.00391583 Jy
! Clean residual min=-0.003961 max=0.003576 Jy/beam
! Clean residual mean=-0.000003 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.113146 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 54 components and 0.113146 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.353 mas, bmaj=13.37 mas, bpa=6.899 degrees
! Estimated noise=0.86911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000932754 Jy
! Component: 100  -  total flux cleaned = 0.00101844 Jy
! Component: 150  -  total flux cleaned = 0.00111139 Jy
! Component: 200  -  total flux cleaned = 0.00114995 Jy
! Total flux subtracted in 200 components = 0.00114995 Jy
! Clean residual min=-0.003293 max=0.004174 Jy/beam
! Clean residual mean=-0.000006 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.114296 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.06826e-05 Jy
! Component: 100  -  total flux cleaned = 7.95506e-05 Jy
! Component: 150  -  total flux cleaned = 0.000116096 Jy
! Component: 200  -  total flux cleaned = 0.000136936 Jy
! Total flux subtracted in 200 components = 0.000136936 Jy
! Clean residual min=-0.003298 max=0.004168 Jy/beam
! Clean residual mean=-0.000006 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.114433 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.114433 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.886 mas, bmaj=10.76 mas, bpa=16.59 degrees
! Estimated noise=0.750514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.50747e-05 Jy
! Component: 100  -  total flux cleaned = 0.000154625 Jy
! Component: 150  -  total flux cleaned = 0.000195957 Jy
! Component: 200  -  total flux cleaned = 0.000234949 Jy
! Total flux subtracted in 200 components = 0.000234949 Jy
! Clean residual min=-0.003740 max=0.003602 Jy/beam
! Clean residual mean=-0.000004 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.114668 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 68 components and 0.114668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091262Jy  sigma=1.276814
! Fit after  self-cal, rms=0.091290Jy  sigma=1.276602
wmodel /J1951-0509_S_map.mod
! wmodel: Unable to open new model file: /J1951-0509_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1951-0509_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.886 x 10.76 at 16.59 degrees (North through East)
! Clean map  min=-0.0034943  max=0.10448 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1951-0509_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.104483 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00096985 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.78472 2.78472 5.56943 11.1389 22.2777 44.5555 89.1109
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.104 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  107.73 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1951-0509_S_dfm.log closed on Thu May 19 18:52:18 2016