! Started logfile: /scr/pima/bg219e_uvs/J1947-0103_X_dfm.log on Thu May 19 18:52:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1947-0103_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1947-0103_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.806217 visibilities/baseline/integration-bin.
! Found source: J1947-0103
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14628 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1947-0103_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027141Jy  sigma=23.955577
! Fit after  self-cal, rms=0.750893Jy  sigma=17.476957
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8202 mas, bmaj=2.538 mas, bpa=19.49 degrees
! Estimated noise=0.442158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.183194 Jy
! Component: 100  -  total flux cleaned = 0.237473 Jy
! Total flux subtracted in 100 components = 0.237473 Jy
! Clean residual min=-0.009275 max=0.023464 Jy/beam
! Clean residual mean=-0.000005 rms=0.002291 Jy/beam
! Combined flux in latest and established models = 0.237473 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.237473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071276Jy  sigma=1.619296
! Fit after  self-cal, rms=0.071138Jy  sigma=1.616682
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0249232 Jy
! Component: 100  -  total flux cleaned = 0.0361973 Jy
! Total flux subtracted in 100 components = 0.0361973 Jy
! Clean residual min=-0.003563 max=0.005023 Jy/beam
! Clean residual mean=-0.000002 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.273671 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 9 components and 0.273671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061227Jy  sigma=1.368638
! Fit after  self-cal, rms=0.061106Jy  sigma=1.366057
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00574405 Jy
! Component: 100  -  total flux cleaned = 0.00870989 Jy
! Total flux subtracted in 100 components = 0.00870989 Jy
! Clean residual min=-0.002420 max=0.002777 Jy/beam
! Clean residual mean=-0.000001 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.282381 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.282381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060535Jy  sigma=1.351950
! Fit after  self-cal, rms=0.060526Jy  sigma=1.351766
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.69 mas, bpa=16.35 degrees
! Estimated noise=0.261585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241452 Jy
! Component: 100  -  total flux cleaned = 0.00390329 Jy
! Component: 150  -  total flux cleaned = 0.00492003 Jy
! Component: 200  -  total flux cleaned = 0.00564287 Jy
! Total flux subtracted in 200 components = 0.00564287 Jy
! Clean residual min=-0.002148 max=0.002300 Jy/beam
! Clean residual mean=-0.000001 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.288024 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.288024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060419Jy  sigma=1.349190
! Fit after  self-cal, rms=0.060420Jy  sigma=1.349140
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.69 at 16.35 degrees (North through East)
! Clean map  min=-0.0019522  max=0.24837 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.04     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.98     NL        1.01     OV        1.02     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.01     
!   LA        0.98     NL        0.99     OV        1.02     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.99     
!   LA        1.01     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        1.01     NL        1.01     OV        1.01     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00     
!   LA        1.00     NL        1.02     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.99     NL        1.03     OV        1.00     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.99     NL        1.01     OV        1.01     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.96     
!   LA        1.01     NL        1.02     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.99     KP        1.00     
!   LA        1.02     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.98     KP        1.00     
!   LA        1.01     NL        1.02     OV        1.01     PT        0.99     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.060420Jy  sigma=1.349140
! Fit after  self-cal, rms=0.060001Jy  sigma=1.343657
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.693 mas, bpa=16.4 degrees
! Estimated noise=0.2612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149558 Jy
! Component: 100  -  total flux cleaned = -0.000317227 Jy
! Component: 150  -  total flux cleaned = -0.000379269 Jy
! Component: 200  -  total flux cleaned = -0.000415905 Jy
! Total flux subtracted in 200 components = -0.000415905 Jy
! Clean residual min=-0.001693 max=0.001882 Jy/beam
! Clean residual mean=-0.000000 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.287608 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.287608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059989Jy  sigma=1.343375
! Fit after  self-cal, rms=0.059983Jy  sigma=1.343339
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059983Jy  sigma=1.343339
! Fit after  self-cal, rms=0.059856Jy  sigma=1.340047
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.693 mas, bpa=16.42 degrees
! Estimated noise=0.260977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.28687e-05 Jy
! Component: 100  -  total flux cleaned = -0.000157497 Jy
! Component: 150  -  total flux cleaned = -0.000189088 Jy
! Component: 200  -  total flux cleaned = -0.000198179 Jy
! Total flux subtracted in 200 components = -0.000198179 Jy
! Clean residual min=-0.001464 max=0.001770 Jy/beam
! Clean residual mean=0.000000 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.28741 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 43 components and 0.28741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059850Jy  sigma=1.339909
! Fit after  self-cal, rms=0.059849Jy  sigma=1.339886
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26.6, -26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016431 Jy
! Component: 100  -  total flux cleaned = 0.00265024 Jy
! Component: 150  -  total flux cleaned = 0.00341153 Jy
! Component: 200  -  total flux cleaned = 0.00400901 Jy
! Total flux subtracted in 200 components = 0.00400901 Jy
! Clean residual min=-0.001384 max=0.001389 Jy/beam
! Clean residual mean=-0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.291419 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 67 components and 0.291419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059795Jy  sigma=1.338611
! Fit after  self-cal, rms=0.059791Jy  sigma=1.338507
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059791Jy  sigma=1.338507
! Fit after  self-cal, rms=0.059751Jy  sigma=1.338414
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=2.693 mas, bpa=16.45 degrees
! Estimated noise=0.260759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000713087 Jy
! Component: 100  -  total flux cleaned = 0.00115219 Jy
! Component: 150  -  total flux cleaned = 0.00145771 Jy
! Component: 200  -  total flux cleaned = 0.0017234 Jy
! Total flux subtracted in 200 components = 0.0017234 Jy
! Clean residual min=-0.001318 max=0.001237 Jy/beam
! Clean residual mean=-0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.293142 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 80 components and 0.293142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059739Jy  sigma=1.338127
! Fit after  self-cal, rms=0.059739Jy  sigma=1.338103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287174 Jy
! Component: 100  -  total flux cleaned = 0.000506895 Jy
! Component: 150  -  total flux cleaned = 0.000666693 Jy
! Component: 200  -  total flux cleaned = 0.00076261 Jy
! Total flux subtracted in 200 components = 0.00076261 Jy
! Clean residual min=-0.001278 max=0.001187 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.293905 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 90 components and 0.293905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059735Jy  sigma=1.338007
! Fit after  self-cal, rms=0.059735Jy  sigma=1.338002
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059735Jy  sigma=1.338002
! Fit after  self-cal, rms=0.059727Jy  sigma=1.337978
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.12 mas, bmaj=3.337 mas, bpa=5.175 degrees
! Estimated noise=0.305873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443258 Jy
! Component: 100  -  total flux cleaned = 0.00056569 Jy
! Component: 150  -  total flux cleaned = 0.000654904 Jy
! Component: 200  -  total flux cleaned = 0.000741607 Jy
! Total flux subtracted in 200 components = 0.000741607 Jy
! Clean residual min=-0.001530 max=0.001554 Jy/beam
! Clean residual mean=-0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.294646 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 98 components and 0.294646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059727Jy  sigma=1.337945
! Fit after  self-cal, rms=0.059727Jy  sigma=1.337930
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152802 Jy
! Component: 100  -  total flux cleaned = 0.000243244 Jy
! Component: 150  -  total flux cleaned = 0.00033102 Jy
! Component: 200  -  total flux cleaned = 0.000370982 Jy
! Total flux subtracted in 200 components = 0.000370982 Jy
! Clean residual min=-0.001476 max=0.001540 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.295017 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.295017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059728Jy  sigma=1.337930
! Fit after  self-cal, rms=0.059728Jy  sigma=1.337923
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=2.694 mas, bpa=16.47 degrees
! Estimated noise=0.260711 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.077 x 2.694 at 16.47 degrees (North through East)
! Clean map  min=-0.0011618  max=0.24736 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8192 mas, bmaj=2.541 mas, bpa=19.54 degrees
! Estimated noise=0.440788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182502 Jy
! Component: 100  -  total flux cleaned = 0.237823 Jy
! Component: 150  -  total flux cleaned = 0.262867 Jy
! Component: 200  -  total flux cleaned = 0.274234 Jy
! Total flux subtracted in 200 components = 0.274234 Jy
! Clean residual min=-0.002787 max=0.004933 Jy/beam
! Clean residual mean=-0.000001 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.274234 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.274234 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=2.694 mas, bpa=16.47 degrees
! Estimated noise=0.260711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592965 Jy
! Component: 100  -  total flux cleaned = 0.00858089 Jy
! Component: 150  -  total flux cleaned = 0.0104964 Jy
! Component: 200  -  total flux cleaned = 0.0120218 Jy
! Total flux subtracted in 200 components = 0.0120218 Jy
! Clean residual min=-0.001497 max=0.001446 Jy/beam
! Clean residual mean=-0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.286256 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 28 components and 0.286256 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.12 mas, bmaj=3.337 mas, bpa=5.175 degrees
! Estimated noise=0.305873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189787 Jy
! Component: 100  -  total flux cleaned = 0.00329536 Jy
! Component: 150  -  total flux cleaned = 0.00438004 Jy
! Component: 200  -  total flux cleaned = 0.00523756 Jy
! Total flux subtracted in 200 components = 0.00523756 Jy
! Clean residual min=-0.001565 max=0.001605 Jy/beam
! Clean residual mean=-0.000001 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.291493 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00068912 Jy
! Component: 100  -  total flux cleaned = 0.00124999 Jy
! Component: 150  -  total flux cleaned = 0.00171016 Jy
! Component: 200  -  total flux cleaned = 0.00209015 Jy
! Total flux subtracted in 200 components = 0.00209015 Jy
! Clean residual min=-0.001452 max=0.001563 Jy/beam
! Clean residual mean=-0.000001 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.293583 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 103 components and 0.293583 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=2.694 mas, bpa=16.47 degrees
! Estimated noise=0.260711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574389 Jy
! Component: 100  -  total flux cleaned = 0.000668326 Jy
! Component: 150  -  total flux cleaned = 0.000733871 Jy
! Component: 200  -  total flux cleaned = 0.000823119 Jy
! Total flux subtracted in 200 components = 0.000823119 Jy
! Clean residual min=-0.001255 max=0.001259 Jy/beam
! Clean residual mean=-0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.294406 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 0.294406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059734Jy  sigma=1.338059
! Fit after  self-cal, rms=0.059733Jy  sigma=1.338036
wmodel /J1947-0103_X_map.mod
! wmodel: Unable to open new model file: /J1947-0103_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1947-0103_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.077 x 2.694 at 16.47 degrees (North through East)
! Clean map  min=-0.0012211  max=0.2474 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1947-0103_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.247401 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000322735 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.391351 0.391351 0.782702 1.5654 3.13081 6.26162 12.5232 25.0465 50.0929
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.247 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  766.575 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1947-0103_X_dfm.log closed on Thu May 19 18:52:05 2016