! Started logfile: /scr/pima/bg219e_uvs/J1941-3007_S_dfm.log on Thu May 19 18:51:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1941-3007_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1941-3007_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.888434 visibilities/baseline/integration-bin.
! Found source: J1941-3007
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7804 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1941-3007_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026338Jy  sigma=16.438149
! Fit after  self-cal, rms=0.836751Jy  sigma=13.132953
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.17 mas, bmaj=12.55 mas, bpa=12.19 degrees
! Estimated noise=0.776434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11563 Jy
! Component: 100  -  total flux cleaned = 0.166407 Jy
! Total flux subtracted in 100 components = 0.166407 Jy
! Clean residual min=-0.010164 max=0.025122 Jy/beam
! Clean residual mean=0.000020 rms=0.003595 Jy/beam
! Combined flux in latest and established models = 0.166407 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.166407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108759Jy  sigma=1.715180
! Fit after  self-cal, rms=0.107074Jy  sigma=1.694961
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0321373 Jy
! Component: 100  -  total flux cleaned = 0.0503709 Jy
! Total flux subtracted in 100 components = 0.0503709 Jy
! Clean residual min=-0.005638 max=0.009872 Jy/beam
! Clean residual mean=0.000009 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 0.216778 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.216778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092503Jy  sigma=1.408673
! Fit after  self-cal, rms=0.092110Jy  sigma=1.404698
! Inverting map 
! Added new window around map position (4.5, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126763 Jy
! Component: 100  -  total flux cleaned = 0.020995 Jy
! Total flux subtracted in 100 components = 0.020995 Jy
! Clean residual min=-0.004889 max=0.005784 Jy/beam
! Clean residual mean=0.000005 rms=0.001374 Jy/beam
! Combined flux in latest and established models = 0.237773 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 57 components and 0.237773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089316Jy  sigma=1.345447
! Fit after  self-cal, rms=0.089231Jy  sigma=1.344715
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.045 mas, bmaj=14.64 mas, bpa=11.13 degrees
! Estimated noise=0.54247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102249 Jy
! Component: 100  -  total flux cleaned = 0.0158676 Jy
! Component: 150  -  total flux cleaned = 0.019387 Jy
! Component: 200  -  total flux cleaned = 0.0216746 Jy
! Total flux subtracted in 200 components = 0.0216746 Jy
! Clean residual min=-0.003923 max=0.004274 Jy/beam
! Clean residual mean=0.000006 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.259448 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 124 components and 0.259448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088222Jy  sigma=1.321460
! Fit after  self-cal, rms=0.088189Jy  sigma=1.321172
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.045 x 14.64 at 11.13 degrees (North through East)
! Clean map  min=-0.0037773  max=0.16492 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.08     KP        0.97     
!   LA        0.98     NL        0.99     OV        0.97     PT        0.95     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.14     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.97     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.08     KP        0.98     
!   LA        1.02     NL        1.01     OV        1.00     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.10     KP        1.00     
!   LA        1.02     NL        1.07     OV        1.01     PT        1.02     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.088189Jy  sigma=1.321172
! Fit after  self-cal, rms=0.090049Jy  sigma=1.313899
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.052 mas, bmaj=14.84 mas, bpa=11.55 degrees
! Estimated noise=0.544975 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118706 Jy
! Component: 100  -  total flux cleaned = -0.00146433 Jy
! Component: 150  -  total flux cleaned = -0.00169597 Jy
! Component: 200  -  total flux cleaned = -0.00177469 Jy
! Total flux subtracted in 200 components = -0.00177469 Jy
! Clean residual min=-0.002950 max=0.003077 Jy/beam
! Clean residual mean=0.000002 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.257673 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 133 components and 0.257673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089976Jy  sigma=1.313082
! Fit after  self-cal, rms=0.090013Jy  sigma=1.312958
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090013Jy  sigma=1.312958
! Fit after  self-cal, rms=0.090760Jy  sigma=1.308528
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.056 mas, bmaj=14.87 mas, bpa=11.51 degrees
! Estimated noise=0.545939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000798255 Jy
! Component: 100  -  total flux cleaned = -0.000984069 Jy
! Component: 150  -  total flux cleaned = -0.00104931 Jy
! Component: 200  -  total flux cleaned = -0.00110637 Jy
! Total flux subtracted in 200 components = -0.00110637 Jy
! Clean residual min=-0.002845 max=0.002819 Jy/beam
! Clean residual mean=0.000004 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.256567 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 142 components and 0.256567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090725Jy  sigma=1.308123
! Fit after  self-cal, rms=0.090748Jy  sigma=1.308082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.53786e-05 Jy
! Component: 100  -  total flux cleaned = -7.91222e-05 Jy
! Component: 150  -  total flux cleaned = -0.000102149 Jy
! Component: 200  -  total flux cleaned = -0.000145615 Jy
! Total flux subtracted in 200 components = -0.000145615 Jy
! Clean residual min=-0.002820 max=0.002813 Jy/beam
! Clean residual mean=0.000004 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.256421 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 147 components and 0.256421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090735Jy  sigma=1.307914
! Fit after  self-cal, rms=0.090734Jy  sigma=1.307902
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090734Jy  sigma=1.307902
! Fit after  self-cal, rms=0.091538Jy  sigma=1.307131
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.057 mas, bmaj=14.91 mas, bpa=11.51 degrees
! Estimated noise=0.546619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000597627 Jy
! Component: 100  -  total flux cleaned = -0.000629072 Jy
! Component: 150  -  total flux cleaned = -0.00067874 Jy
! Component: 200  -  total flux cleaned = -0.000720041 Jy
! Total flux subtracted in 200 components = -0.000720041 Jy
! Clean residual min=-0.002877 max=0.002742 Jy/beam
! Clean residual mean=0.000006 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.255701 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 154 components and 0.255701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091518Jy  sigma=1.306910
! Fit after  self-cal, rms=0.091536Jy  sigma=1.306895
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.01809e-05 Jy
! Component: 100  -  total flux cleaned = -6.91072e-05 Jy
! Component: 150  -  total flux cleaned = -6.93466e-05 Jy
! Component: 200  -  total flux cleaned = -7.01324e-05 Jy
! Total flux subtracted in 200 components = -7.01324e-05 Jy
! Clean residual min=-0.002847 max=0.002753 Jy/beam
! Clean residual mean=0.000005 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.255631 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 160 components and 0.255631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091529Jy  sigma=1.306800
! Fit after  self-cal, rms=0.091527Jy  sigma=1.306797
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091527Jy  sigma=1.306797
! Fit after  self-cal, rms=0.092008Jy  sigma=1.306723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.394 mas, bmaj=23.04 mas, bpa=0.8894 degrees
! Estimated noise=0.613507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00058532 Jy
! Component: 100  -  total flux cleaned = -0.000659758 Jy
! Component: 150  -  total flux cleaned = -0.000684564 Jy
! Component: 200  -  total flux cleaned = -0.000708166 Jy
! Total flux subtracted in 200 components = -0.000708166 Jy
! Clean residual min=-0.002566 max=0.002419 Jy/beam
! Clean residual mean=0.000008 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.254923 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 165 components and 0.254923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092005Jy  sigma=1.306665
! Fit after  self-cal, rms=0.092013Jy  sigma=1.306651
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.13335e-05 Jy
! Component: 100  -  total flux cleaned = -9.46035e-05 Jy
! Component: 150  -  total flux cleaned = -0.000116256 Jy
! Component: 200  -  total flux cleaned = -0.00011649 Jy
! Total flux subtracted in 200 components = -0.00011649 Jy
! Clean residual min=-0.002526 max=0.002428 Jy/beam
! Clean residual mean=0.000008 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.254806 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 170 components and 0.254806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092011Jy  sigma=1.306646
! Fit after  self-cal, rms=0.092010Jy  sigma=1.306641
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.058 mas, bmaj=14.94 mas, bpa=11.55 degrees
! Estimated noise=0.547406 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.058 x 14.94 at 11.55 degrees (North through East)
! Clean map  min=-0.0028473  max=0.16693 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=12.77 mas, bpa=12.52 degrees
! Estimated noise=0.794304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119581 Jy
! Component: 100  -  total flux cleaned = 0.174178 Jy
! Component: 150  -  total flux cleaned = 0.204487 Jy
! Component: 200  -  total flux cleaned = 0.221472 Jy
! Total flux subtracted in 200 components = 0.221472 Jy
! Clean residual min=-0.004971 max=0.008448 Jy/beam
! Clean residual mean=0.000004 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 0.221472 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.221472 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.058 mas, bmaj=14.94 mas, bpa=11.55 degrees
! Estimated noise=0.547406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154998 Jy
! Component: 100  -  total flux cleaned = 0.0232018 Jy
! Component: 150  -  total flux cleaned = 0.0274289 Jy
! Component: 200  -  total flux cleaned = 0.029978 Jy
! Total flux subtracted in 200 components = 0.029978 Jy
! Clean residual min=-0.003016 max=0.002845 Jy/beam
! Clean residual mean=0.000002 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.25145 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 77 components and 0.25145 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.394 mas, bmaj=23.04 mas, bpa=0.8894 degrees
! Estimated noise=0.613507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188286 Jy
! Component: 100  -  total flux cleaned = 0.00249259 Jy
! Component: 150  -  total flux cleaned = 0.00258058 Jy
! Component: 200  -  total flux cleaned = 0.00268633 Jy
! Total flux subtracted in 200 components = 0.00268633 Jy
! Clean residual min=-0.002577 max=0.002428 Jy/beam
! Clean residual mean=0.000006 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.254137 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.48781e-05 Jy
! Component: 100  -  total flux cleaned = 0.000180393 Jy
! Component: 150  -  total flux cleaned = 0.000219265 Jy
! Component: 200  -  total flux cleaned = 0.000256177 Jy
! Total flux subtracted in 200 components = 0.000256177 Jy
! Clean residual min=-0.002553 max=0.002436 Jy/beam
! Clean residual mean=0.000007 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.254393 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.254393 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.058 mas, bmaj=14.94 mas, bpa=11.55 degrees
! Estimated noise=0.547406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.00555e-06 Jy
! Component: 100  -  total flux cleaned = -7.60421e-05 Jy
! Component: 150  -  total flux cleaned = -0.000177862 Jy
! Component: 200  -  total flux cleaned = -0.000178045 Jy
! Total flux subtracted in 200 components = -0.000178045 Jy
! Clean residual min=-0.002782 max=0.002671 Jy/beam
! Clean residual mean=0.000005 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.254215 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 108 components and 0.254215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092062Jy  sigma=1.307420
! Fit after  self-cal, rms=0.092051Jy  sigma=1.307228
wmodel /J1941-3007_S_map.mod
! wmodel: Unable to open new model file: /J1941-3007_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1941-3007_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.058 x 14.94 at 11.55 degrees (North through East)
! Clean map  min=-0.0026958  max=0.16748 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1941-3007_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.167477 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000710912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.27345 1.27345 2.5469 5.09381 10.1876 20.3752 40.7505 81.5009
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.167 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  235.58 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1941-3007_S_dfm.log closed on Thu May 19 18:51:39 2016