! Started logfile: /scr/pima/bg219e_uvs/J1941-0511_S_dfm.log on Thu May 19 18:51:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1941-0511_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1941-0511_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.798942 visibilities/baseline/integration-bin.
! Found source: J1941-0511
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4832 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1941-0511_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.084225Jy  sigma=20.923083
! Fit after  self-cal, rms=0.649593Jy  sigma=12.570845
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=9.871 mas, bpa=19.14 degrees
! Estimated noise=0.802801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.263289 Jy
! Component: 100  -  total flux cleaned = 0.326873 Jy
! Total flux subtracted in 100 components = 0.326873 Jy
! Clean residual min=-0.014196 max=0.028487 Jy/beam
! Clean residual mean=0.000027 rms=0.004566 Jy/beam
! Combined flux in latest and established models = 0.326873 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.326873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126677Jy  sigma=2.019453
! Fit after  self-cal, rms=0.126562Jy  sigma=2.018266
! Inverting map 
! Added new window around map position (-4.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0335913 Jy
! Component: 100  -  total flux cleaned = 0.0570901 Jy
! Total flux subtracted in 100 components = 0.0570901 Jy
! Clean residual min=-0.011018 max=0.019069 Jy/beam
! Clean residual mean=0.000008 rms=0.003220 Jy/beam
! Combined flux in latest and established models = 0.383963 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 35 components and 0.383963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111002Jy  sigma=1.675754
! Fit after  self-cal, rms=0.110772Jy  sigma=1.671031
! Inverting map 
! Added new window around map position (-10.5, 19.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205737 Jy
! Component: 100  -  total flux cleaned = 0.0362654 Jy
! Total flux subtracted in 100 components = 0.0362654 Jy
! Clean residual min=-0.008332 max=0.010020 Jy/beam
! Clean residual mean=0.000006 rms=0.002449 Jy/beam
! Combined flux in latest and established models = 0.420229 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.420229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103912Jy  sigma=1.507509
! Fit after  self-cal, rms=0.103762Jy  sigma=1.505303
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.908 mas, bmaj=10.6 mas, bpa=16.13 degrees
! Estimated noise=0.563399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209743 Jy
! Component: 100  -  total flux cleaned = 0.0362108 Jy
! Component: 150  -  total flux cleaned = 0.0479931 Jy
! Component: 200  -  total flux cleaned = 0.0572257 Jy
! Total flux subtracted in 200 components = 0.0572257 Jy
! Clean residual min=-0.006380 max=0.007333 Jy/beam
! Clean residual mean=0.000016 rms=0.002133 Jy/beam
! Combined flux in latest and established models = 0.477454 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 85 components and 0.477454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097240Jy  sigma=1.353585
! Fit after  self-cal, rms=0.097077Jy  sigma=1.349146
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.908 x 10.6 at 16.13 degrees (North through East)
! Clean map  min=-0.0063018  max=0.34805 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.03     KP        0.98     
!   LA        0.97     NL        1.01     OV        1.01     PT        0.92     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.97     NL        0.99     OV        1.02     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.04     KP        0.98     
!   LA        0.96     NL        0.98     OV        1.02     PT        0.94     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.96     KP        0.98     
!   LA        0.96     NL        0.97     OV        1.02     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.097077Jy  sigma=1.349146
! Fit after  self-cal, rms=0.093111Jy  sigma=1.306185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.931 mas, bmaj=10.66 mas, bpa=16.14 degrees
! Estimated noise=0.559154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00510949 Jy
! Component: 100  -  total flux cleaned = 0.00849512 Jy
! Component: 150  -  total flux cleaned = 0.0107354 Jy
! Component: 200  -  total flux cleaned = 0.0122446 Jy
! Total flux subtracted in 200 components = 0.0122446 Jy
! Clean residual min=-0.005792 max=0.006469 Jy/beam
! Clean residual mean=0.000005 rms=0.001476 Jy/beam
! Combined flux in latest and established models = 0.489699 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 106 components and 0.489699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092738Jy  sigma=1.296060
! Fit after  self-cal, rms=0.092719Jy  sigma=1.295616
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092719Jy  sigma=1.295616
! Fit after  self-cal, rms=0.097476Jy  sigma=1.286440
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.93 mas, bmaj=10.66 mas, bpa=16.11 degrees
! Estimated noise=0.564253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393929 Jy
! Component: 100  -  total flux cleaned = 0.00584198 Jy
! Component: 150  -  total flux cleaned = 0.00623378 Jy
! Component: 200  -  total flux cleaned = 0.00640292 Jy
! Total flux subtracted in 200 components = 0.00640292 Jy
! Clean residual min=-0.004514 max=0.006096 Jy/beam
! Clean residual mean=0.000006 rms=0.001321 Jy/beam
! Combined flux in latest and established models = 0.496102 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 0.496102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097038Jy  sigma=1.284428
! Fit after  self-cal, rms=0.097035Jy  sigma=1.284298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (69.5, -118.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557825 Jy
! Component: 100  -  total flux cleaned = 0.00793811 Jy
! Component: 150  -  total flux cleaned = 0.00841646 Jy
! Component: 200  -  total flux cleaned = 0.00871093 Jy
! Total flux subtracted in 200 components = 0.00871093 Jy
! Clean residual min=-0.004212 max=0.005045 Jy/beam
! Clean residual mean=0.000005 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.504813 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 155 components and 0.504813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096529Jy  sigma=1.277512
! Fit after  self-cal, rms=0.096455Jy  sigma=1.276837
! Inverting map 
! Added new window around map position (-120, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170715 Jy
! Component: 100  -  total flux cleaned = 0.000933535 Jy
! Component: 150  -  total flux cleaned = 0.000941598 Jy
! Component: 200  -  total flux cleaned = 0.000936308 Jy
! Total flux subtracted in 200 components = 0.000936308 Jy
! Clean residual min=-0.003742 max=0.005140 Jy/beam
! Clean residual mean=0.000007 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.505749 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 183 components and 0.505749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096009Jy  sigma=1.271433
! Fit after  self-cal, rms=0.095966Jy  sigma=1.270792
! Inverting map 
! Added new window around map position (-5.5, 37.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414774 Jy
! Component: 100  -  total flux cleaned = 0.00514398 Jy
! Component: 150  -  total flux cleaned = 0.00553438 Jy
! Component: 200  -  total flux cleaned = 0.0060253 Jy
! Total flux subtracted in 200 components = 0.0060253 Jy
! Clean residual min=-0.003538 max=0.003931 Jy/beam
! Clean residual mean=0.000004 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.511774 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 206 components and 0.511774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095624Jy  sigma=1.265923
! Fit after  self-cal, rms=0.095618Jy  sigma=1.265582
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095618Jy  sigma=1.265582
! Fit after  self-cal, rms=0.095905Jy  sigma=1.262874
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.929 mas, bmaj=10.65 mas, bpa=16.09 degrees
! Estimated noise=0.569005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342738 Jy
! Component: 100  -  total flux cleaned = 0.00436765 Jy
! Component: 150  -  total flux cleaned = 0.00466088 Jy
! Component: 200  -  total flux cleaned = 0.00512124 Jy
! Total flux subtracted in 200 components = 0.00512124 Jy
! Clean residual min=-0.003420 max=0.004435 Jy/beam
! Clean residual mean=0.000002 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.516896 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 232 components and 0.516896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095483Jy  sigma=1.261406
! Fit after  self-cal, rms=0.095477Jy  sigma=1.261341
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (89.5, 84.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024158 Jy
! Component: 100  -  total flux cleaned = 0.00287104 Jy
! Component: 150  -  total flux cleaned = 0.00348397 Jy
! Component: 200  -  total flux cleaned = 0.00392141 Jy
! Total flux subtracted in 200 components = 0.00392141 Jy
! Clean residual min=-0.003214 max=0.003779 Jy/beam
! Clean residual mean=-0.000000 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.520817 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 255 components and 0.520817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095127Jy  sigma=1.258421
! Fit after  self-cal, rms=0.095101Jy  sigma=1.258119
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095101Jy  sigma=1.258119
! Fit after  self-cal, rms=0.095410Jy  sigma=1.256282
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.446 mas, bmaj=13.25 mas, bpa=7.206 degrees
! Estimated noise=0.664354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380044 Jy
! Component: 100  -  total flux cleaned = 0.00469022 Jy
! Component: 150  -  total flux cleaned = 0.00475595 Jy
! Component: 200  -  total flux cleaned = 0.00474844 Jy
! Total flux subtracted in 200 components = 0.00474844 Jy
! Clean residual min=-0.003873 max=0.004527 Jy/beam
! Clean residual mean=-0.000003 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 0.525566 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 275 components and 0.525566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095009Jy  sigma=1.255728
! Fit after  self-cal, rms=0.095005Jy  sigma=1.255503
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.45494e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133966 Jy
! Component: 150  -  total flux cleaned = 3.69192e-05 Jy
! Component: 200  -  total flux cleaned = 0.000175116 Jy
! Total flux subtracted in 200 components = 0.000175116 Jy
! Clean residual min=-0.003731 max=0.004333 Jy/beam
! Clean residual mean=-0.000004 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.525741 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 300 components and 0.525741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094910Jy  sigma=1.255308
! Fit after  self-cal, rms=0.094914Jy  sigma=1.255275
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.928 mas, bmaj=10.65 mas, bpa=16.07 degrees
! Estimated noise=0.573682 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.928 x 10.65 at 16.07 degrees (North through East)
! Clean map  min=-0.0036243  max=0.35398 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=9.883 mas, bpa=19.09 degrees
! Estimated noise=0.825547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.270655 Jy
! Component: 100  -  total flux cleaned = 0.336871 Jy
! Component: 150  -  total flux cleaned = 0.370716 Jy
! Component: 200  -  total flux cleaned = 0.394982 Jy
! Total flux subtracted in 200 components = 0.394982 Jy
! Clean residual min=-0.010030 max=0.014110 Jy/beam
! Clean residual mean=0.000013 rms=0.003082 Jy/beam
! Combined flux in latest and established models = 0.394982 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.394982 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.928 mas, bmaj=10.65 mas, bpa=16.07 degrees
! Estimated noise=0.573682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270094 Jy
! Component: 100  -  total flux cleaned = 0.0462331 Jy
! Component: 150  -  total flux cleaned = 0.0606529 Jy
! Component: 200  -  total flux cleaned = 0.0720049 Jy
! Total flux subtracted in 200 components = 0.0720049 Jy
! Clean residual min=-0.005735 max=0.008550 Jy/beam
! Clean residual mean=0.000015 rms=0.002002 Jy/beam
! Combined flux in latest and established models = 0.466987 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 78 components and 0.466987 Jy
! Inverting map 
! Added new window around map position (-75.5, 99.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0096788 Jy
! Component: 100  -  total flux cleaned = 0.0177466 Jy
! Component: 150  -  total flux cleaned = 0.0247334 Jy
! Component: 200  -  total flux cleaned = 0.0298664 Jy
! Total flux subtracted in 200 components = 0.0298664 Jy
! Clean residual min=-0.004507 max=0.005069 Jy/beam
! Clean residual mean=0.000007 rms=0.001391 Jy/beam
! Combined flux in latest and established models = 0.496853 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 113 components and 0.496853 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.446 mas, bmaj=13.25 mas, bpa=7.206 degrees
! Estimated noise=0.664354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00755856 Jy
! Component: 100  -  total flux cleaned = 0.0123489 Jy
! Component: 150  -  total flux cleaned = 0.015357 Jy
! Component: 200  -  total flux cleaned = 0.0172809 Jy
! Total flux subtracted in 200 components = 0.0172809 Jy
! Clean residual min=-0.004100 max=0.004643 Jy/beam
! Clean residual mean=0.000003 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.514134 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113223 Jy
! Component: 100  -  total flux cleaned = 0.00227002 Jy
! Component: 150  -  total flux cleaned = 0.0031894 Jy
! Component: 200  -  total flux cleaned = 0.00391928 Jy
! Total flux subtracted in 200 components = 0.00391928 Jy
! Clean residual min=-0.003652 max=0.004423 Jy/beam
! Clean residual mean=-0.000002 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.518053 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 194 components and 0.518053 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.928 mas, bmaj=10.65 mas, bpa=16.07 degrees
! Estimated noise=0.573682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.63535e-05 Jy
! Component: 100  -  total flux cleaned = 0.000742883 Jy
! Component: 150  -  total flux cleaned = 0.00147651 Jy
! Component: 200  -  total flux cleaned = 0.00195704 Jy
! Total flux subtracted in 200 components = 0.00195704 Jy
! Clean residual min=-0.003561 max=0.004053 Jy/beam
! Clean residual mean=-0.000003 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.52001 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 226 components and 0.520011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095029Jy  sigma=1.259393
! Fit after  self-cal, rms=0.095034Jy  sigma=1.257992
wmodel /J1941-0511_S_map.mod
! wmodel: Unable to open new model file: /J1941-0511_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1941-0511_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.928 x 10.65 at 16.07 degrees (North through East)
! Clean map  min=-0.0038035  max=0.35539 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1941-0511_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.355388 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000940099 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.793583 0.793583 1.58717 3.17433 6.34867 12.6973 25.3947 50.7893
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.355 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  378.032 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1941-0511_S_dfm.log closed on Thu May 19 18:51:31 2016