! Started logfile: /scr/pima/bg219e_uvs/J1934+6138_S_uvs.log on Thu Apr  7 06:50:50 2016
obs /scr/pima/bg219e_uvs/J1934+6138_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1934+6138_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.903439 visibilities/baseline/integration-bin.
! Found source: J1934+6138
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5464 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1934+6138_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029743Jy  sigma=23.167588
! Fit after  self-cal, rms=0.814573Jy  sigma=18.300153
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.084 mas, bmaj=5.294 mas, bpa=86.29 degrees
! Estimated noise=0.690238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140383 Jy
! Component: 100  -  total flux cleaned = 0.177059 Jy
! Total flux subtracted in 100 components = 0.177059 Jy
! Clean residual min=-0.006682 max=0.015355 Jy/beam
! Clean residual mean=-0.000045 rms=0.001850 Jy/beam
! Combined flux in latest and established models = 0.177059 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.177059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067776Jy  sigma=1.450975
! Fit after  self-cal, rms=0.067722Jy  sigma=1.449722
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016754 Jy
! Component: 100  -  total flux cleaned = 0.025008 Jy
! Total flux subtracted in 100 components = 0.025008 Jy
! Clean residual min=-0.004061 max=0.004164 Jy/beam
! Clean residual mean=-0.000013 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.202067 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.202067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063156Jy  sigma=1.341286
! Fit after  self-cal, rms=0.063100Jy  sigma=1.339852
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.995 mas, bmaj=6.116 mas, bpa=83.7 degrees
! Estimated noise=0.450662 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00532153 Jy
! Component: 100  -  total flux cleaned = 0.00764745 Jy
! Component: 150  -  total flux cleaned = 0.00866522 Jy
! Component: 200  -  total flux cleaned = 0.00886866 Jy
! Total flux subtracted in 200 components = 0.00886866 Jy
! Clean residual min=-0.002785 max=0.002781 Jy/beam
! Clean residual mean=-0.000004 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.210936 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 28 components and 0.210936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062672Jy  sigma=1.331018
! Fit after  self-cal, rms=0.062662Jy  sigma=1.330716
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.995 x 6.116 at 83.7 degrees (North through East)
! Clean map  min=-0.0026762  max=0.18609 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        1.01     
!   LA        1.00     NL        0.99     OV        0.97     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.03     PT        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.01     
!   LA        1.00     NL        0.97     OV        1.03     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.00     NL        0.99     OV        1.01     PT        1.03     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.062662Jy  sigma=1.330716
! Fit after  self-cal, rms=0.062165Jy  sigma=1.324494
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.986 mas, bmaj=6.107 mas, bpa=83.63 degrees
! Estimated noise=0.450018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000828529 Jy
! Component: 100  -  total flux cleaned = 0.000830298 Jy
! Component: 150  -  total flux cleaned = 0.000807255 Jy
! Component: 200  -  total flux cleaned = 0.000785661 Jy
! Total flux subtracted in 200 components = 0.000785661 Jy
! Clean residual min=-0.002672 max=0.002836 Jy/beam
! Clean residual mean=-0.000003 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.211722 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 34 components and 0.211722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062134Jy  sigma=1.324014
! Fit after  self-cal, rms=0.062127Jy  sigma=1.323905
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062127Jy  sigma=1.323905
! Fit after  self-cal, rms=0.061938Jy  sigma=1.319224
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.989 mas, bmaj=6.102 mas, bpa=83.53 degrees
! Estimated noise=0.450251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164632 Jy
! Component: 100  -  total flux cleaned = 0.000210466 Jy
! Component: 150  -  total flux cleaned = 0.000210455 Jy
! Component: 200  -  total flux cleaned = 0.000210689 Jy
! Total flux subtracted in 200 components = 0.000210689 Jy
! Clean residual min=-0.002709 max=0.002597 Jy/beam
! Clean residual mean=-0.000002 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.211932 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 41 components and 0.211932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061921Jy  sigma=1.318958
! Fit after  self-cal, rms=0.061924Jy  sigma=1.318875
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.61606e-06 Jy
! Component: 100  -  total flux cleaned = 1.7534e-05 Jy
! Component: 150  -  total flux cleaned = 1.77707e-05 Jy
! Component: 200  -  total flux cleaned = 1.8185e-05 Jy
! Total flux subtracted in 200 components = 1.8185e-05 Jy
! Clean residual min=-0.002682 max=0.002548 Jy/beam
! Clean residual mean=-0.000002 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.21195 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.21195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061915Jy  sigma=1.318735
! Fit after  self-cal, rms=0.061915Jy  sigma=1.318703
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061915Jy  sigma=1.318703
! Fit after  self-cal, rms=0.061945Jy  sigma=1.318676
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.991 mas, bmaj=6.102 mas, bpa=83.42 degrees
! Estimated noise=0.450341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.04874e-05 Jy
! Component: 100  -  total flux cleaned = 7.19679e-05 Jy
! Component: 150  -  total flux cleaned = 9.40685e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104747 Jy
! Total flux subtracted in 200 components = 0.000104747 Jy
! Clean residual min=-0.002680 max=0.002487 Jy/beam
! Clean residual mean=-0.000002 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.212055 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.212055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061938Jy  sigma=1.318573
! Fit after  self-cal, rms=0.061939Jy  sigma=1.318551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22914e-06 Jy
! Component: 100  -  total flux cleaned = 2.24833e-05 Jy
! Component: 150  -  total flux cleaned = 2.21433e-05 Jy
! Component: 200  -  total flux cleaned = 2.20773e-05 Jy
! Total flux subtracted in 200 components = 2.20773e-05 Jy
! Clean residual min=-0.002666 max=0.002457 Jy/beam
! Clean residual mean=-0.000002 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.212077 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.212077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061935Jy  sigma=1.318486
! Fit after  self-cal, rms=0.061935Jy  sigma=1.318473
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061935Jy  sigma=1.318473
! Fit after  self-cal, rms=0.061967Jy  sigma=1.318464
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.452 mas, bmaj=9.286 mas, bpa=-88.55 degrees
! Estimated noise=0.523308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033754 Jy
! Component: 100  -  total flux cleaned = 0.0004061 Jy
! Component: 150  -  total flux cleaned = 0.000437694 Jy
! Component: 200  -  total flux cleaned = 0.000455952 Jy
! Total flux subtracted in 200 components = 0.000455952 Jy
! Clean residual min=-0.002293 max=0.002431 Jy/beam
! Clean residual mean=-0.000002 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.212533 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.212533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061966Jy  sigma=1.318460
! Fit after  self-cal, rms=0.061967Jy  sigma=1.318431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.17452e-05 Jy
! Component: 100  -  total flux cleaned = -4.48544e-07 Jy
! Component: 150  -  total flux cleaned = 1.67228e-05 Jy
! Component: 200  -  total flux cleaned = 3.23924e-05 Jy
! Total flux subtracted in 200 components = 3.23924e-05 Jy
! Clean residual min=-0.002277 max=0.002420 Jy/beam
! Clean residual mean=-0.000002 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.212566 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 56 components and 0.212566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061967Jy  sigma=1.318442
! Fit after  self-cal, rms=0.061967Jy  sigma=1.318425
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.992 mas, bmaj=6.102 mas, bpa=83.37 degrees
! Estimated noise=0.450496 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.992 x 6.102 at 83.37 degrees (North through East)
! Clean map  min=-0.0025756  max=0.18551 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.091 mas, bmaj=5.287 mas, bpa=86.03 degrees
! Estimated noise=0.692648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140608 Jy
! Component: 100  -  total flux cleaned = 0.178309 Jy
! Component: 150  -  total flux cleaned = 0.195208 Jy
! Component: 200  -  total flux cleaned = 0.203587 Jy
! Total flux subtracted in 200 components = 0.203587 Jy
! Clean residual min=-0.003995 max=0.004059 Jy/beam
! Clean residual mean=-0.000015 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.203587 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.203587 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.992 mas, bmaj=6.102 mas, bpa=83.37 degrees
! Estimated noise=0.450496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00492142 Jy
! Component: 100  -  total flux cleaned = 0.00725669 Jy
! Component: 150  -  total flux cleaned = 0.0082807 Jy
! Component: 200  -  total flux cleaned = 0.00848718 Jy
! Total flux subtracted in 200 components = 0.00848718 Jy
! Clean residual min=-0.002674 max=0.002527 Jy/beam
! Clean residual mean=-0.000002 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.212074 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 31 components and 0.212074 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.452 mas, bmaj=9.286 mas, bpa=-88.55 degrees
! Estimated noise=0.523308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000520808 Jy
! Component: 100  -  total flux cleaned = 0.000487885 Jy
! Component: 150  -  total flux cleaned = 0.000498787 Jy
! Component: 200  -  total flux cleaned = 0.000508995 Jy
! Total flux subtracted in 200 components = 0.000508995 Jy
! Clean residual min=-0.002279 max=0.002457 Jy/beam
! Clean residual mean=-0.000002 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.212583 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.55738e-06 Jy
! Component: 100  -  total flux cleaned = 2.75182e-05 Jy
! Component: 150  -  total flux cleaned = 4.42873e-05 Jy
! Component: 200  -  total flux cleaned = 6.03234e-05 Jy
! Total flux subtracted in 200 components = 6.03234e-05 Jy
! Clean residual min=-0.002265 max=0.002442 Jy/beam
! Clean residual mean=-0.000002 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.212643 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.212643 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.992 mas, bmaj=6.102 mas, bpa=83.37 degrees
! Estimated noise=0.450496 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161525 Jy
! Component: 100  -  total flux cleaned = -0.000167093 Jy
! Component: 150  -  total flux cleaned = -0.000167004 Jy
! Component: 200  -  total flux cleaned = -0.000181965 Jy
! Total flux subtracted in 200 components = -0.000181965 Jy
! Clean residual min=-0.002632 max=0.002505 Jy/beam
! Clean residual mean=-0.000001 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.212461 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.212461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061980Jy  sigma=1.318738
! Fit after  self-cal, rms=0.061975Jy  sigma=1.318679
wmodel /scr/pima/bg219e_uvs/J1934+6138_S_map.mod
! Writing 53 model components to file: /scr/pima/bg219e_uvs/J1934+6138_S_map.mod
wobs /scr/pima/bg219e_uvs/J1934+6138_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1934+6138_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J1934+6138_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219e_uvs/J1934+6138_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.42322e-05 Jy
! Component: 100  -  total flux cleaned = -0.000383553 Jy
! Component: 150  -  total flux cleaned = -0.000607831 Jy
! Component: 200  -  total flux cleaned = -0.000678596 Jy
! Component: 250  -  total flux cleaned = -0.00061053 Jy
! Component: 300  -  total flux cleaned = -0.0005781 Jy
! Component: 350  -  total flux cleaned = -0.000640656 Jy
! Component: 400  -  total flux cleaned = -0.000730774 Jy
! Component: 450  -  total flux cleaned = -0.000818492 Jy
! Component: 500  -  total flux cleaned = -0.000931165 Jy
! Component: 550  -  total flux cleaned = -0.00104137 Jy
! Component: 600  -  total flux cleaned = -0.00109508 Jy
! Component: 650  -  total flux cleaned = -0.00109539 Jy
! Component: 700  -  total flux cleaned = -0.00114773 Jy
! Component: 750  -  total flux cleaned = -0.00117323 Jy
! Component: 800  -  total flux cleaned = -0.00119788 Jy
! Component: 850  -  total flux cleaned = -0.00119836 Jy
! Component: 900  -  total flux cleaned = -0.00124537 Jy
! Component: 950  -  total flux cleaned = -0.00115188 Jy
! Component: 1000  -  total flux cleaned = -0.00119742 Jy
! Component: 1050  -  total flux cleaned = -0.00112989 Jy
! Component: 1100  -  total flux cleaned = -0.00117435 Jy
! Component: 1150  -  total flux cleaned = -0.0011959 Jy
! Component: 1200  -  total flux cleaned = -0.00119591 Jy
! Component: 1250  -  total flux cleaned = -0.0011546 Jy
! Component: 1300  -  total flux cleaned = -0.00111382 Jy
! Component: 1350  -  total flux cleaned = -0.00109365 Jy
! Component: 1400  -  total flux cleaned = -0.0010534 Jy
! Component: 1450  -  total flux cleaned = -0.00103388 Jy
! Component: 1500  -  total flux cleaned = -0.000994788 Jy
! Component: 1550  -  total flux cleaned = -0.000975962 Jy
! Component: 1600  -  total flux cleaned = -0.000919209 Jy
! Component: 1650  -  total flux cleaned = -0.000938058 Jy
! Component: 1700  -  total flux cleaned = -0.000919646 Jy
! Component: 1750  -  total flux cleaned = -0.000937648 Jy
! Component: 1800  -  total flux cleaned = -0.000919212 Jy
! Component: 1850  -  total flux cleaned = -0.000936883 Jy
! Component: 1900  -  total flux cleaned = -0.000936802 Jy
! Component: 1950  -  total flux cleaned = -0.000936986 Jy
! Component: 2000  -  total flux cleaned = -0.000954543 Jy
! Component: 2050  -  total flux cleaned = -0.00100579 Jy
! Component: 2100  -  total flux cleaned = -0.000938447 Jy
! Component: 2150  -  total flux cleaned = -0.000971752 Jy
! Component: 2200  -  total flux cleaned = -0.000889255 Jy
! Component: 2250  -  total flux cleaned = -0.000889424 Jy
! Component: 2300  -  total flux cleaned = -0.000889442 Jy
! Component: 2350  -  total flux cleaned = -0.000873383 Jy
! Component: 2400  -  total flux cleaned = -0.000889255 Jy
! Component: 2450  -  total flux cleaned = -0.000873547 Jy
! Component: 2500  -  total flux cleaned = -0.000873468 Jy
! Component: 2550  -  total flux cleaned = -0.000935045 Jy
! Component: 2600  -  total flux cleaned = -0.000904233 Jy
! Component: 2650  -  total flux cleaned = -0.000858795 Jy
! Component: 2700  -  total flux cleaned = -0.000858883 Jy
! Component: 2750  -  total flux cleaned = -0.000829048 Jy
! Component: 2800  -  total flux cleaned = -0.000799528 Jy
! Component: 2850  -  total flux cleaned = -0.000711548 Jy
! Component: 2900  -  total flux cleaned = -0.000740679 Jy
! Component: 2950  -  total flux cleaned = -0.000711843 Jy
! Component: 3000  -  total flux cleaned = -0.000683206 Jy
! Component: 3050  -  total flux cleaned = -0.0006829 Jy
! Component: 3100  -  total flux cleaned = -0.00066871 Jy
! Component: 3150  -  total flux cleaned = -0.000584718 Jy
! Component: 3200  -  total flux cleaned = -0.000612494 Jy
! Component: 3250  -  total flux cleaned = -0.000584739 Jy
! Component: 3300  -  total flux cleaned = -0.000557315 Jy
! Component: 3350  -  total flux cleaned = -0.000516476 Jy
! Component: 3400  -  total flux cleaned = -0.000502915 Jy
! Component: 3450  -  total flux cleaned = -0.000462749 Jy
! Component: 3500  -  total flux cleaned = -0.000422624 Jy
! Component: 3550  -  total flux cleaned = -0.000409485 Jy
! Component: 3600  -  total flux cleaned = -0.000396155 Jy
! Component: 3650  -  total flux cleaned = -0.0003832 Jy
! Component: 3700  -  total flux cleaned = -0.000357368 Jy
! Component: 3750  -  total flux cleaned = -0.000331667 Jy
! Component: 3800  -  total flux cleaned = -0.000331544 Jy
! Component: 3850  -  total flux cleaned = -0.000331455 Jy
! Component: 3900  -  total flux cleaned = -0.000306341 Jy
! Component: 3950  -  total flux cleaned = -0.000306265 Jy
! Component: 4000  -  total flux cleaned = -0.000293819 Jy
! Component: 4050  -  total flux cleaned = -0.000330931 Jy
! Total flux subtracted in 4096 components = -0.000281568 Jy
! Clean residual min=-0.000958 max=0.000701 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.21218 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 328 components and 0.21218 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1934+6138_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.992 x 6.102 at 83.37 degrees (North through East)
! Clean map  min=-0.0017393  max=0.18559 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1934+6138_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.185591 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226006 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.365328 0.365328 0.730657 1.46131 2.92263 5.84526 11.6905 23.381 46.762 93.5241
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.185 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  821.178 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1934+6138_S_uvs.log closed on Thu Apr  7 06:50:54 2016