! Started logfile: /scr/pima/bg219e_uvs/J1933+1504_X_dfm.log on Thu May 19 18:51:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1933+1504_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1933+1504_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.87069 visibilities/baseline/integration-bin.
! Found source: J1933+1504
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21816 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1933+1504_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007950Jy  sigma=24.422191
! Fit after  self-cal, rms=0.906097Jy  sigma=21.945017
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9623 mas, bmaj=2.149 mas, bpa=23.35 degrees
! Estimated noise=0.407597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.070367 Jy
! Component: 100  -  total flux cleaned = 0.0903859 Jy
! Total flux subtracted in 100 components = 0.0903859 Jy
! Clean residual min=-0.006361 max=0.018993 Jy/beam
! Clean residual mean=-0.000036 rms=0.001994 Jy/beam
! Combined flux in latest and established models = 0.0903859 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0903859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070145Jy  sigma=1.650115
! Fit after  self-cal, rms=0.069625Jy  sigma=1.638602
! Inverting map 
! Added new window around map position (-3, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165548 Jy
! Component: 100  -  total flux cleaned = 0.0253497 Jy
! Total flux subtracted in 100 components = 0.0253497 Jy
! Clean residual min=-0.005396 max=0.009412 Jy/beam
! Clean residual mean=-0.000026 rms=0.001413 Jy/beam
! Combined flux in latest and established models = 0.115736 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.115736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064645Jy  sigma=1.505880
! Fit after  self-cal, rms=0.064219Jy  sigma=1.496499
! Inverting map 
! Added new window around map position (-7.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00942303 Jy
! Component: 100  -  total flux cleaned = 0.0162239 Jy
! Total flux subtracted in 100 components = 0.0162239 Jy
! Clean residual min=-0.004292 max=0.004367 Jy/beam
! Clean residual mean=-0.000021 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.131959 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 48 components and 0.131959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061951Jy  sigma=1.434454
! Fit after  self-cal, rms=0.061834Jy  sigma=1.432196
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.233 mas, bmaj=2.388 mas, bpa=18.79 degrees
! Estimated noise=0.205623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102723 Jy
! Component: 100  -  total flux cleaned = 0.0180044 Jy
! Component: 150  -  total flux cleaned = 0.0241353 Jy
! Component: 200  -  total flux cleaned = 0.0291737 Jy
! Total flux subtracted in 200 components = 0.0291737 Jy
! Clean residual min=-0.003412 max=0.004171 Jy/beam
! Clean residual mean=-0.000018 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.161133 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 95 components and 0.161133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059433Jy  sigma=1.366938
! Fit after  self-cal, rms=0.059306Jy  sigma=1.363822
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.233 x 2.388 at 18.79 degrees (North through East)
! Clean map  min=-0.0033033  max=0.09592 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        1.01     
!   LA        0.95     NL        1.01     OV        0.99     PT        0.90     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.07     KP        1.00     
!   LA        0.91     NL        1.05     OV        1.00     PT        0.88     
!   SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.06     KP        0.98     
!   LA        0.93     NL        1.00     OV        1.00     PT        0.92     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.01     KP        0.96     
!   LA        0.95     NL        0.95     OV        1.02     PT        0.92     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.02     KP        1.00     
!   LA        0.93     NL        1.00     OV        1.00     PT        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        0.99     KP        1.01     
!   LA        0.92     NL        1.01     OV        0.97     PT        0.89     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.01     KP        0.98     
!   LA        0.96     NL        1.02     OV        1.01     PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.05     KP        1.02     
!   LA        0.91     NL        1.02     OV        0.99     PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.94     HN        1.02     KP        0.97     
!   LA        0.95     NL        1.04     OV        0.98     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.95     KP        1.00     
!   LA        0.97     NL        1.01     OV        1.01     PT        0.92     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        1.03     KP        0.99     
!   LA        0.96     NL        1.02     OV        1.01     PT        0.95     
!   SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        1.01     
!   LA        0.99     NL        0.99     OV        1.01     PT        0.91     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059306Jy  sigma=1.363822
! Fit after  self-cal, rms=0.057533Jy  sigma=1.348128
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=2.414 mas, bpa=18.64 degrees
! Estimated noise=0.19854 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390018 Jy
! Component: 100  -  total flux cleaned = 0.0065297 Jy
! Component: 150  -  total flux cleaned = 0.00848558 Jy
! Component: 200  -  total flux cleaned = 0.0100258 Jy
! Total flux subtracted in 200 components = 0.0100258 Jy
! Clean residual min=-0.001702 max=0.002465 Jy/beam
! Clean residual mean=-0.000002 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.171159 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 136 components and 0.171159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057223Jy  sigma=1.338709
! Fit after  self-cal, rms=0.057223Jy  sigma=1.337914
! Inverting map 
! Added new window around map position (-5.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227954 Jy
! Component: 100  -  total flux cleaned = 0.00334808 Jy
! Component: 150  -  total flux cleaned = 0.00393719 Jy
! Component: 200  -  total flux cleaned = 0.00439838 Jy
! Total flux subtracted in 200 components = 0.00439838 Jy
! Clean residual min=-0.001539 max=0.001619 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.175557 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 176 components and 0.175557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057117Jy  sigma=1.334706
! Fit after  self-cal, rms=0.057106Jy  sigma=1.334433
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057106Jy  sigma=1.334433
! Fit after  self-cal, rms=0.056885Jy  sigma=1.331696
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=2.408 mas, bpa=18.6 degrees
! Estimated noise=0.198156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134984 Jy
! Component: 100  -  total flux cleaned = 0.00223002 Jy
! Component: 150  -  total flux cleaned = 0.00289161 Jy
! Component: 200  -  total flux cleaned = 0.00334414 Jy
! Total flux subtracted in 200 components = 0.00334414 Jy
! Clean residual min=-0.001356 max=0.001406 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.178901 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 217 components and 0.178901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056842Jy  sigma=1.330328
! Fit after  self-cal, rms=0.056838Jy  sigma=1.330158
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00057531 Jy
! Component: 100  -  total flux cleaned = 0.00098196 Jy
! Component: 150  -  total flux cleaned = 0.00128902 Jy
! Component: 200  -  total flux cleaned = 0.00152158 Jy
! Total flux subtracted in 200 components = 0.00152158 Jy
! Clean residual min=-0.001264 max=0.001321 Jy/beam
! Clean residual mean=-0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.180423 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 236 components and 0.180423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056822Jy  sigma=1.329624
! Fit after  self-cal, rms=0.056819Jy  sigma=1.329579
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056819Jy  sigma=1.329579
! Fit after  self-cal, rms=0.056785Jy  sigma=1.329392
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=2.407 mas, bpa=18.64 degrees
! Estimated noise=0.197962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000747712 Jy
! Component: 100  -  total flux cleaned = 0.00116912 Jy
! Component: 150  -  total flux cleaned = 0.00153064 Jy
! Component: 200  -  total flux cleaned = 0.00179655 Jy
! Total flux subtracted in 200 components = 0.00179655 Jy
! Clean residual min=-0.001146 max=0.001234 Jy/beam
! Clean residual mean=-0.000002 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.18222 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 256 components and 0.18222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056772Jy  sigma=1.328944
! Fit after  self-cal, rms=0.056771Jy  sigma=1.328906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285217 Jy
! Component: 100  -  total flux cleaned = 0.000440675 Jy
! Component: 150  -  total flux cleaned = 0.00061119 Jy
! Component: 200  -  total flux cleaned = 0.000742303 Jy
! Total flux subtracted in 200 components = 0.000742303 Jy
! Clean residual min=-0.001108 max=0.001200 Jy/beam
! Clean residual mean=-0.000002 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.182962 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 268 components and 0.182962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056764Jy  sigma=1.328702
! Fit after  self-cal, rms=0.056763Jy  sigma=1.328686
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056763Jy  sigma=1.328686
! Fit after  self-cal, rms=0.056764Jy  sigma=1.328610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.295 mas, bmaj=2.964 mas, bpa=1.783 degrees
! Estimated noise=0.223272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734509 Jy
! Component: 100  -  total flux cleaned = 0.00109477 Jy
! Component: 150  -  total flux cleaned = 0.00135077 Jy
! Component: 200  -  total flux cleaned = 0.00151056 Jy
! Total flux subtracted in 200 components = 0.00151056 Jy
! Clean residual min=-0.001187 max=0.001122 Jy/beam
! Clean residual mean=-0.000003 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.184472 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 279 components and 0.184472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056758Jy  sigma=1.328387
! Fit after  self-cal, rms=0.056758Jy  sigma=1.328357
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156921 Jy
! Component: 100  -  total flux cleaned = 0.00028505 Jy
! Component: 150  -  total flux cleaned = 0.000400027 Jy
! Component: 200  -  total flux cleaned = 0.000504547 Jy
! Total flux subtracted in 200 components = 0.000504547 Jy
! Clean residual min=-0.001156 max=0.001092 Jy/beam
! Clean residual mean=-0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.184977 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 292 components and 0.184977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056756Jy  sigma=1.328272
! Fit after  self-cal, rms=0.056754Jy  sigma=1.328255
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.407 mas, bpa=18.68 degrees
! Estimated noise=0.197849 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.251 x 2.407 at 18.68 degrees (North through East)
! Clean map  min=-0.00098156  max=0.09249 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.971 mas, bmaj=2.162 mas, bpa=23.2 degrees
! Estimated noise=0.39752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0687361 Jy
! Component: 100  -  total flux cleaned = 0.0921939 Jy
! Component: 150  -  total flux cleaned = 0.106404 Jy
! Component: 200  -  total flux cleaned = 0.116539 Jy
! Total flux subtracted in 200 components = 0.116539 Jy
! Clean residual min=-0.004280 max=0.005824 Jy/beam
! Clean residual mean=-0.000022 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.116539 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.116539 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.407 mas, bpa=18.68 degrees
! Estimated noise=0.197849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126531 Jy
! Component: 100  -  total flux cleaned = 0.0219833 Jy
! Component: 150  -  total flux cleaned = 0.0292923 Jy
! Component: 200  -  total flux cleaned = 0.0351743 Jy
! Total flux subtracted in 200 components = 0.0351743 Jy
! Clean residual min=-0.003117 max=0.003592 Jy/beam
! Clean residual mean=-0.000014 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.151714 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 78 components and 0.151714 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.295 mas, bmaj=2.964 mas, bpa=1.783 degrees
! Estimated noise=0.223272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00751646 Jy
! Component: 100  -  total flux cleaned = 0.0129595 Jy
! Component: 150  -  total flux cleaned = 0.0171237 Jy
! Component: 200  -  total flux cleaned = 0.0203827 Jy
! Total flux subtracted in 200 components = 0.0203827 Jy
! Clean residual min=-0.002152 max=0.002088 Jy/beam
! Clean residual mean=-0.000011 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.172096 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259342 Jy
! Component: 100  -  total flux cleaned = 0.00468405 Jy
! Component: 150  -  total flux cleaned = 0.0063865 Jy
! Component: 200  -  total flux cleaned = 0.00778316 Jy
! Total flux subtracted in 200 components = 0.00778316 Jy
! Clean residual min=-0.001524 max=0.001273 Jy/beam
! Clean residual mean=-0.000006 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.179879 Jy
! Adding 116 model components to the UV plane model.
! The established model now contains 169 components and 0.179879 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.407 mas, bpa=18.68 degrees
! Estimated noise=0.197849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121167 Jy
! Component: 100  -  total flux cleaned = 0.00214915 Jy
! Component: 150  -  total flux cleaned = 0.00293713 Jy
! Component: 200  -  total flux cleaned = 0.00360619 Jy
! Total flux subtracted in 200 components = 0.00360619 Jy
! Clean residual min=-0.001156 max=0.001243 Jy/beam
! Clean residual mean=-0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.183486 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 192 components and 0.183486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056797Jy  sigma=1.329260
! Fit after  self-cal, rms=0.056785Jy  sigma=1.329018
wmodel /J1933+1504_X_map.mod
! wmodel: Unable to open new model file: /J1933+1504_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1933+1504_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.251 x 2.407 at 18.68 degrees (North through East)
! Clean map  min=-0.001057  max=0.092134 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1933+1504_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0921338 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000284938 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.927796 0.927796 1.85559 3.71118 7.42237 14.8447 29.6895 59.379
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  323.346 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1933+1504_X_dfm.log closed on Thu May 19 18:51:12 2016