! Started logfile: /scr/pima/bg219e_uvs/J1927+6117_X_dfm.log on Thu May 19 18:51:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1927+6117_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1927+6117_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.892857 visibilities/baseline/integration-bin.
! Found source: J1927+6117
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1927+6117_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.203945Jy  sigma=23.677060
! Fit after  self-cal, rms=0.453209Jy  sigma=9.315285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=1.358 mas, bpa=76.29 degrees
! Estimated noise=0.653324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.447286 Jy
! Component: 100  -  total flux cleaned = 0.618042 Jy
! Total flux subtracted in 100 components = 0.618042 Jy
! Clean residual min=-0.034466 max=0.080181 Jy/beam
! Clean residual mean=-0.000049 rms=0.009379 Jy/beam
! Combined flux in latest and established models = 0.618042 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.618042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.184904Jy  sigma=3.507968
! Fit after  self-cal, rms=0.178644Jy  sigma=3.389835
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0985796 Jy
! Component: 100  -  total flux cleaned = 0.144513 Jy
! Total flux subtracted in 100 components = 0.144513 Jy
! Clean residual min=-0.018696 max=0.024090 Jy/beam
! Clean residual mean=-0.000021 rms=0.004181 Jy/beam
! Combined flux in latest and established models = 0.762555 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.762555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101254Jy  sigma=1.922080
! Fit after  self-cal, rms=0.096783Jy  sigma=1.836571
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0338845 Jy
! Component: 100  -  total flux cleaned = 0.0498748 Jy
! Total flux subtracted in 100 components = 0.0498748 Jy
! Clean residual min=-0.015073 max=0.014229 Jy/beam
! Clean residual mean=-0.000011 rms=0.002757 Jy/beam
! Combined flux in latest and established models = 0.81243 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.81243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081273Jy  sigma=1.551756
! Fit after  self-cal, rms=0.079832Jy  sigma=1.526083
! Inverting map 
! Added new window around map position (1, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176694 Jy
! Component: 100  -  total flux cleaned = 0.0287256 Jy
! Total flux subtracted in 100 components = 0.0287256 Jy
! Clean residual min=-0.012822 max=0.010094 Jy/beam
! Clean residual mean=-0.000006 rms=0.002250 Jy/beam
! Combined flux in latest and established models = 0.841156 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 28 components and 0.841156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074667Jy  sigma=1.435748
! Fit after  self-cal, rms=0.074140Jy  sigma=1.426731
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.267 mas, bmaj=1.566 mas, bpa=78.51 degrees
! Estimated noise=0.382901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124734 Jy
! Component: 100  -  total flux cleaned = 0.0180617 Jy
! Component: 150  -  total flux cleaned = 0.0214921 Jy
! Component: 200  -  total flux cleaned = 0.0241679 Jy
! Total flux subtracted in 200 components = 0.0241679 Jy
! Clean residual min=-0.009446 max=0.006596 Jy/beam
! Clean residual mean=0.000001 rms=0.001762 Jy/beam
! Combined flux in latest and established models = 0.865324 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 44 components and 0.865324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071450Jy  sigma=1.379784
! Fit after  self-cal, rms=0.070896Jy  sigma=1.369822
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.267 x 1.566 at 78.51 degrees (North through East)
! Clean map  min=-0.0085069  max=0.55042 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.98     
!   LA        1.00     NL        1.01     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.97     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.98     NL        1.02     OV        1.00     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.97     
!   LA        1.00     NL        1.02     OV        0.99     PT        0.96     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.00     NL        1.02     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.98     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.98     
!   LA        0.99     NL        1.02     OV        1.00     PT        1.02     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.070896Jy  sigma=1.369822
! Fit after  self-cal, rms=0.070129Jy  sigma=1.352180
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.267 mas, bmaj=1.567 mas, bpa=78.47 degrees
! Estimated noise=0.383046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00391066 Jy
! Component: 100  -  total flux cleaned = -0.00305253 Jy
! Component: 150  -  total flux cleaned = -0.00284029 Jy
! Component: 200  -  total flux cleaned = -0.00247152 Jy
! Total flux subtracted in 200 components = -0.00247152 Jy
! Clean residual min=-0.008022 max=0.005494 Jy/beam
! Clean residual mean=0.000002 rms=0.001422 Jy/beam
! Combined flux in latest and established models = 0.862852 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.862852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069188Jy  sigma=1.334110
! Fit after  self-cal, rms=0.068747Jy  sigma=1.326495
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068747Jy  sigma=1.326495
! Fit after  self-cal, rms=0.068242Jy  sigma=1.314188
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.266 mas, bmaj=1.57 mas, bpa=78.46 degrees
! Estimated noise=0.383402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180189 Jy
! Component: 100  -  total flux cleaned = -0.00165226 Jy
! Component: 150  -  total flux cleaned = -0.00138637 Jy
! Component: 200  -  total flux cleaned = -0.00101621 Jy
! Total flux subtracted in 200 components = -0.00101621 Jy
! Clean residual min=-0.006988 max=0.004731 Jy/beam
! Clean residual mean=0.000000 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 0.861836 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.861836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067664Jy  sigma=1.303189
! Fit after  self-cal, rms=0.067364Jy  sigma=1.298247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027485 Jy
! Component: 100  -  total flux cleaned = -0.000146522 Jy
! Component: 150  -  total flux cleaned = -6.80746e-05 Jy
! Component: 200  -  total flux cleaned = 0.000266714 Jy
! Total flux subtracted in 200 components = 0.000266714 Jy
! Clean residual min=-0.006383 max=0.004212 Jy/beam
! Clean residual mean=0.000000 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.862102 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.862103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066998Jy  sigma=1.291297
! Fit after  self-cal, rms=0.066808Jy  sigma=1.288294
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066808Jy  sigma=1.288294
! Fit after  self-cal, rms=0.066884Jy  sigma=1.288044
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.267 mas, bmaj=1.571 mas, bpa=78.5 degrees
! Estimated noise=0.383791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000636886 Jy
! Component: 100  -  total flux cleaned = -0.000586854 Jy
! Component: 150  -  total flux cleaned = -0.000593634 Jy
! Component: 200  -  total flux cleaned = -0.000435666 Jy
! Total flux subtracted in 200 components = -0.000435666 Jy
! Clean residual min=-0.005796 max=0.003873 Jy/beam
! Clean residual mean=0.000000 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.861667 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.861667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066629Jy  sigma=1.283048
! Fit after  self-cal, rms=0.066487Jy  sigma=1.280881
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.07335e-05 Jy
! Component: 100  -  total flux cleaned = -0.000211726 Jy
! Component: 150  -  total flux cleaned = -0.000158116 Jy
! Component: 200  -  total flux cleaned = -1.35849e-05 Jy
! Total flux subtracted in 200 components = -1.35849e-05 Jy
! Clean residual min=-0.005357 max=0.003554 Jy/beam
! Clean residual mean=0.000000 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.861653 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.861653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066317Jy  sigma=1.277587
! Fit after  self-cal, rms=0.066224Jy  sigma=1.276222
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066224Jy  sigma=1.276222
! Fit after  self-cal, rms=0.066275Jy  sigma=1.276115
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=2.448 mas, bpa=80.44 degrees
! Estimated noise=0.472111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00025661 Jy
! Component: 100  -  total flux cleaned = 0.00033438 Jy
! Component: 150  -  total flux cleaned = 0.000687942 Jy
! Component: 200  -  total flux cleaned = 0.000904796 Jy
! Total flux subtracted in 200 components = 0.000904796 Jy
! Clean residual min=-0.004051 max=0.003554 Jy/beam
! Clean residual mean=0.000001 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.862558 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.862558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066208Jy  sigma=1.274835
! Fit after  self-cal, rms=0.066145Jy  sigma=1.273883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252462 Jy
! Component: 100  -  total flux cleaned = -0.000136843 Jy
! Component: 150  -  total flux cleaned = 8.12815e-05 Jy
! Component: 200  -  total flux cleaned = 0.000198432 Jy
! Total flux subtracted in 200 components = 0.000198432 Jy
! Clean residual min=-0.003934 max=0.003463 Jy/beam
! Clean residual mean=0.000001 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 0.862756 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.862756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066093Jy  sigma=1.272874
! Fit after  self-cal, rms=0.066045Jy  sigma=1.272168
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.267 mas, bmaj=1.572 mas, bpa=78.51 degrees
! Estimated noise=0.384072 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.267 x 1.572 at 78.51 degrees (North through East)
! Clean map  min=-0.004453  max=0.54809 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066045Jy  sigma=1.272168
! Fit after  self-cal, rms=0.062349Jy  sigma=1.188661
! Inverting map and beam 
! Estimated beam: bmin=1.271 mas, bmaj=1.569 mas, bpa=78.61 degrees
! Estimated noise=0.38203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00268499 Jy
! Component: 100  -  total flux cleaned = -0.0031164 Jy
! Component: 150  -  total flux cleaned = -0.00325136 Jy
! Component: 200  -  total flux cleaned = -0.00328722 Jy
! Total flux subtracted in 200 components = -0.00328722 Jy
! Clean residual min=-0.004387 max=0.003287 Jy/beam
! Clean residual mean=-0.000002 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.859469 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.859469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062200Jy  sigma=1.185573
! Fit after  self-cal, rms=0.062158Jy  sigma=1.185081
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.07675e-05 Jy
! Component: 100  -  total flux cleaned = -0.000124271 Jy
! Component: 150  -  total flux cleaned = -0.000123062 Jy
! Component: 200  -  total flux cleaned = -0.000187568 Jy
! Total flux subtracted in 200 components = -0.000187568 Jy
! Clean residual min=-0.004159 max=0.003153 Jy/beam
! Clean residual mean=-0.000002 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.859281 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 0.859282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062102Jy  sigma=1.183897
! Fit after  self-cal, rms=0.062071Jy  sigma=1.183554
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062071Jy  sigma=1.183554
! Fit after  self-cal, rms=0.061780Jy  sigma=1.182265
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=1.36 mas, bpa=76.3 degrees
! Estimated noise=0.650792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.456767 Jy
! Component: 100  -  total flux cleaned = 0.639808 Jy
! Component: 150  -  total flux cleaned = 0.720258 Jy
! Component: 200  -  total flux cleaned = 0.758754 Jy
! Total flux subtracted in 200 components = 0.758754 Jy
! Clean residual min=-0.008675 max=0.018898 Jy/beam
! Clean residual mean=-0.000016 rms=0.002512 Jy/beam
! Combined flux in latest and established models = 0.758754 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.758754 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.271 mas, bmaj=1.569 mas, bpa=78.54 degrees
! Estimated noise=0.380365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0312303 Jy
! Component: 100  -  total flux cleaned = 0.0497856 Jy
! Component: 150  -  total flux cleaned = 0.0620791 Jy
! Component: 200  -  total flux cleaned = 0.0707069 Jy
! Total flux subtracted in 200 components = 0.0707069 Jy
! Clean residual min=-0.003884 max=0.005701 Jy/beam
! Clean residual mean=0.000000 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.829461 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 47 components and 0.829461 Jy
! Inverting map 
! Added new window around map position (25.6, 47.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0063984 Jy
! Component: 100  -  total flux cleaned = 0.0110423 Jy
! Component: 150  -  total flux cleaned = 0.0145695 Jy
! Component: 200  -  total flux cleaned = 0.0173262 Jy
! Total flux subtracted in 200 components = 0.0173262 Jy
! Clean residual min=-0.003269 max=0.003256 Jy/beam
! Clean residual mean=0.000000 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.846787 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 78 components and 0.846787 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=2.445 mas, bpa=79.13 degrees
! Estimated noise=0.467444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398427 Jy
! Component: 100  -  total flux cleaned = 0.00658962 Jy
! Component: 150  -  total flux cleaned = 0.00843099 Jy
! Component: 200  -  total flux cleaned = 0.00973596 Jy
! Total flux subtracted in 200 components = 0.00973596 Jy
! Clean residual min=-0.003501 max=0.002972 Jy/beam
! Clean residual mean=-0.000001 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.856523 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626192 Jy
! Component: 100  -  total flux cleaned = 0.000912744 Jy
! Component: 150  -  total flux cleaned = 0.00118162 Jy
! Component: 200  -  total flux cleaned = 0.00138737 Jy
! Total flux subtracted in 200 components = 0.00138737 Jy
! Clean residual min=-0.003407 max=0.002859 Jy/beam
! Clean residual mean=-0.000001 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.85791 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 106 components and 0.85791 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.271 mas, bmaj=1.569 mas, bpa=78.54 degrees
! Estimated noise=0.380365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000533759 Jy
! Component: 100  -  total flux cleaned = -0.000606459 Jy
! Component: 150  -  total flux cleaned = -0.00063925 Jy
! Component: 200  -  total flux cleaned = -0.000698053 Jy
! Total flux subtracted in 200 components = -0.000698053 Jy
! Clean residual min=-0.002886 max=0.003027 Jy/beam
! Clean residual mean=-0.000001 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.857212 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 120 components and 0.857212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061451Jy  sigma=1.175086
! Fit after  self-cal, rms=0.061350Jy  sigma=1.173802
wmodel /J1927+6117_X_map.mod
! wmodel: Unable to open new model file: /J1927+6117_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1927+6117_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.271 x 1.569 at 78.54 degrees (North through East)
! Clean map  min=-0.002756  max=0.54057 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1927+6117_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.54057 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00069171 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.383878 0.383878 0.767756 1.53551 3.07102 6.14205 12.2841 24.5682 49.1364 98.2728
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.54 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  781.498 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1927+6117_X_dfm.log closed on Thu May 19 18:51:03 2016