! Started logfile: /scr/pima/bg219e_uvs/J1915+6548_X_dfm.log on Thu May 19 18:50:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1915+6548_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1915+6548_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.875534 visibilities/baseline/integration-bin.
! Found source: J1915+6548
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19668 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1915+6548_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008284Jy  sigma=24.045190
! Fit after  self-cal, rms=0.878789Jy  sigma=20.925861
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9732 mas, bmaj=1.391 mas, bpa=75.03 degrees
! Estimated noise=0.467011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0877051 Jy
! Component: 100  -  total flux cleaned = 0.113191 Jy
! Total flux subtracted in 100 components = 0.113191 Jy
! Clean residual min=-0.005832 max=0.012649 Jy/beam
! Clean residual mean=-0.000002 rms=0.001660 Jy/beam
! Combined flux in latest and established models = 0.113191 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.113191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068005Jy  sigma=1.569204
! Fit after  self-cal, rms=0.067717Jy  sigma=1.563297
! Inverting map 
! Added new window around map position (-0.6, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147264 Jy
! Component: 100  -  total flux cleaned = 0.0238515 Jy
! Total flux subtracted in 100 components = 0.0238515 Jy
! Clean residual min=-0.004459 max=0.005330 Jy/beam
! Clean residual mean=-0.000002 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.137042 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.137042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062712Jy  sigma=1.432022
! Fit after  self-cal, rms=0.062517Jy  sigma=1.427239
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00726131 Jy
! Component: 100  -  total flux cleaned = 0.0122082 Jy
! Total flux subtracted in 100 components = 0.0122082 Jy
! Clean residual min=-0.003642 max=0.005367 Jy/beam
! Clean residual mean=-0.000001 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.14925 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 43 components and 0.14925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061195Jy  sigma=1.392556
! Fit after  self-cal, rms=0.061131Jy  sigma=1.390935
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.259 mas, bmaj=1.673 mas, bpa=77.99 degrees
! Estimated noise=0.227619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00783658 Jy
! Component: 100  -  total flux cleaned = 0.0130554 Jy
! Component: 150  -  total flux cleaned = 0.0167832 Jy
! Component: 200  -  total flux cleaned = 0.0195656 Jy
! Total flux subtracted in 200 components = 0.0195656 Jy
! Clean residual min=-0.002567 max=0.004215 Jy/beam
! Clean residual mean=0.000001 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.168816 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 69 components and 0.168816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059939Jy  sigma=1.360053
! Fit after  self-cal, rms=0.059878Jy  sigma=1.358131
! Inverting map 
! Added new window around map position (-30.8, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375246 Jy
! Component: 100  -  total flux cleaned = 0.00618293 Jy
! Component: 150  -  total flux cleaned = 0.008054 Jy
! Component: 200  -  total flux cleaned = 0.00951855 Jy
! Total flux subtracted in 200 components = 0.00951855 Jy
! Clean residual min=-0.001647 max=0.001670 Jy/beam
! Clean residual mean=0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.178334 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 100 components and 0.178334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059591Jy  sigma=1.350713
! Fit after  self-cal, rms=0.059573Jy  sigma=1.350228
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.259 x 1.673 at 77.99 degrees (North through East)
! Clean map  min=-0.0015547  max=0.11816 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.02     KP        0.95     
!   LA        0.98     NL        0.99     OV        1.01     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.93     NL        0.99     OV        1.03     PT        1.00     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.99     KP        0.98     
!   LA        0.97     NL        0.99     OV        0.98     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        0.96     
!   LA        0.96     NL        1.03     OV        1.01     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.07     KP        0.97     
!   LA        0.96     NL        1.01     OV        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.99     KP        0.98     
!   LA        0.94     NL        1.01     OV        1.02     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.05     KP        0.96     
!   LA        0.97     NL        1.02     OV        1.00     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.98     KP        1.00     
!   LA        0.96     NL        1.04     OV        1.03     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.01     KP        0.97     
!   LA        1.00     NL        1.02     OV        1.01     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.96     KP        0.94     
!   LA        1.00     NL        1.03     OV        0.98     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.04     KP        1.01     
!   LA        0.99     NL        1.03     OV        0.97     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        1.01     
!   LA        0.96     NL        0.98     OV        1.04     PT        1.01     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059573Jy  sigma=1.350228
! Fit after  self-cal, rms=0.059603Jy  sigma=1.345409
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.264 mas, bmaj=1.68 mas, bpa=77.87 degrees
! Estimated noise=0.226836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124155 Jy
! Component: 100  -  total flux cleaned = 0.00162771 Jy
! Component: 150  -  total flux cleaned = 0.00185821 Jy
! Component: 200  -  total flux cleaned = 0.00200914 Jy
! Total flux subtracted in 200 components = 0.00200914 Jy
! Clean residual min=-0.001277 max=0.001272 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.180344 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 127 components and 0.180344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059566Jy  sigma=1.344536
! Fit after  self-cal, rms=0.059574Jy  sigma=1.344440
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059574Jy  sigma=1.344440
! Fit after  self-cal, rms=0.059635Jy  sigma=1.341547
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=1.682 mas, bpa=77.75 degrees
! Estimated noise=0.226889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368131 Jy
! Component: 100  -  total flux cleaned = 0.000497065 Jy
! Component: 150  -  total flux cleaned = 0.00055497 Jy
! Component: 200  -  total flux cleaned = 0.00062695 Jy
! Total flux subtracted in 200 components = 0.00062695 Jy
! Clean residual min=-0.001152 max=0.001319 Jy/beam
! Clean residual mean=0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.180971 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 145 components and 0.18097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059622Jy  sigma=1.341255
! Fit after  self-cal, rms=0.059627Jy  sigma=1.341199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.8, -18.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000814551 Jy
! Component: 100  -  total flux cleaned = 0.00124225 Jy
! Component: 150  -  total flux cleaned = 0.00154365 Jy
! Component: 200  -  total flux cleaned = 0.00173004 Jy
! Total flux subtracted in 200 components = 0.00173004 Jy
! Clean residual min=-0.001056 max=0.001004 Jy/beam
! Clean residual mean=0.000001 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.1827 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 163 components and 0.1827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059601Jy  sigma=1.340661
! Fit after  self-cal, rms=0.059598Jy  sigma=1.340637
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059598Jy  sigma=1.340637
! Fit after  self-cal, rms=0.059617Jy  sigma=1.340610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=1.682 mas, bpa=77.75 degrees
! Estimated noise=0.226878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000384662 Jy
! Component: 100  -  total flux cleaned = 0.000618296 Jy
! Component: 150  -  total flux cleaned = 0.000717694 Jy
! Component: 200  -  total flux cleaned = 0.0007972 Jy
! Total flux subtracted in 200 components = 0.0007972 Jy
! Clean residual min=-0.001041 max=0.001018 Jy/beam
! Clean residual mean=0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.183498 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 167 components and 0.183498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059607Jy  sigma=1.340403
! Fit after  self-cal, rms=0.059607Jy  sigma=1.340399
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160281 Jy
! Component: 100  -  total flux cleaned = 0.000234854 Jy
! Component: 150  -  total flux cleaned = 0.000306536 Jy
! Component: 200  -  total flux cleaned = 0.00036165 Jy
! Total flux subtracted in 200 components = 0.00036165 Jy
! Clean residual min=-0.001029 max=0.001016 Jy/beam
! Clean residual mean=0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.183859 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 175 components and 0.183859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059600Jy  sigma=1.340263
! Fit after  self-cal, rms=0.059600Jy  sigma=1.340261
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059600Jy  sigma=1.340261
! Fit after  self-cal, rms=0.059640Jy  sigma=1.340249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.347 mas, bmaj=2.674 mas, bpa=-88.05 degrees
! Estimated noise=0.264673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000451747 Jy
! Component: 100  -  total flux cleaned = 0.000690628 Jy
! Component: 150  -  total flux cleaned = 0.000840917 Jy
! Component: 200  -  total flux cleaned = 0.000983188 Jy
! Total flux subtracted in 200 components = 0.000983188 Jy
! Clean residual min=-0.000936 max=0.000913 Jy/beam
! Clean residual mean=0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.184843 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 190 components and 0.184843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059637Jy  sigma=1.340159
! Fit after  self-cal, rms=0.059637Jy  sigma=1.340143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.00837e-05 Jy
! Component: 100  -  total flux cleaned = 0.000202644 Jy
! Component: 150  -  total flux cleaned = 0.000248697 Jy
! Component: 200  -  total flux cleaned = 0.000299863 Jy
! Total flux subtracted in 200 components = 0.000299863 Jy
! Clean residual min=-0.000918 max=0.000933 Jy/beam
! Clean residual mean=0.000002 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.185142 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 198 components and 0.185142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059636Jy  sigma=1.340107
! Fit after  self-cal, rms=0.059636Jy  sigma=1.340095
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=1.682 mas, bpa=77.72 degrees
! Estimated noise=0.226979 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.262 x 1.682 at 77.72 degrees (North through East)
! Clean map  min=-0.00096875  max=0.11749 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9756 mas, bmaj=1.396 mas, bpa=74.95 degrees
! Estimated noise=0.46823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0874806 Jy
! Component: 100  -  total flux cleaned = 0.114232 Jy
! Component: 150  -  total flux cleaned = 0.129649 Jy
! Component: 200  -  total flux cleaned = 0.1395 Jy
! Total flux subtracted in 200 components = 0.1395 Jy
! Clean residual min=-0.004385 max=0.005439 Jy/beam
! Clean residual mean=-0.000001 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.1395 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.1395 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=1.682 mas, bpa=77.72 degrees
! Estimated noise=0.226979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106484 Jy
! Component: 100  -  total flux cleaned = 0.0176451 Jy
! Component: 150  -  total flux cleaned = 0.0228283 Jy
! Component: 200  -  total flux cleaned = 0.0267756 Jy
! Total flux subtracted in 200 components = 0.0267756 Jy
! Clean residual min=-0.001993 max=0.002375 Jy/beam
! Clean residual mean=0.000002 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.166276 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 57 components and 0.166276 Jy
! Inverting map 
! Added new window around map position (13.6, -31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306576 Jy
! Component: 100  -  total flux cleaned = 0.00550022 Jy
! Component: 150  -  total flux cleaned = 0.00746143 Jy
! Component: 200  -  total flux cleaned = 0.0090776 Jy
! Total flux subtracted in 200 components = 0.0090776 Jy
! Clean residual min=-0.001387 max=0.001255 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.175353 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 97 components and 0.175353 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.347 mas, bmaj=2.674 mas, bpa=-88.05 degrees
! Estimated noise=0.264673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208842 Jy
! Component: 100  -  total flux cleaned = 0.00355556 Jy
! Component: 150  -  total flux cleaned = 0.00474733 Jy
! Component: 200  -  total flux cleaned = 0.00553495 Jy
! Total flux subtracted in 200 components = 0.00553495 Jy
! Clean residual min=-0.001202 max=0.001172 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.180888 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000693782 Jy
! Component: 100  -  total flux cleaned = 0.00123047 Jy
! Component: 150  -  total flux cleaned = 0.00155314 Jy
! Component: 200  -  total flux cleaned = 0.0018191 Jy
! Total flux subtracted in 200 components = 0.0018191 Jy
! Clean residual min=-0.001047 max=0.001013 Jy/beam
! Clean residual mean=0.000002 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.182707 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 161 components and 0.182707 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=1.682 mas, bpa=77.72 degrees
! Estimated noise=0.226979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.89196e-05 Jy
! Component: 100  -  total flux cleaned = 6.24099e-05 Jy
! Component: 150  -  total flux cleaned = 0.000190555 Jy
! Component: 200  -  total flux cleaned = 0.000334473 Jy
! Total flux subtracted in 200 components = 0.000334473 Jy
! Clean residual min=-0.001071 max=0.001114 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.183042 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 186 components and 0.183042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059666Jy  sigma=1.340705
! Fit after  self-cal, rms=0.059662Jy  sigma=1.340644
wmodel /J1915+6548_X_map.mod
! wmodel: Unable to open new model file: /J1915+6548_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1915+6548_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.262 x 1.682 at 77.72 degrees (North through East)
! Clean map  min=-0.0010106  max=0.118 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1915+6548_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.117999 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000259016 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.658524 0.658524 1.31705 2.63409 5.26819 10.5364 21.0728 42.1455 84.291
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.117 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  455.564 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1915+6548_X_dfm.log closed on Thu May 19 18:50:23 2016