! Started logfile: /scr/pima/bg219e_uvs/J1911-2006_X_uvs.log on Thu Apr  7 09:14:42 2016
obs /scr/pima/bg219e_uvs/J1911-2006_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1911-2006_X_uva.fits
! AN table 1: 13 integrations on 28 of 28 possible baselines.
! AN table 2: 8 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.743197 visibilities/baseline/integration-bin.
! Found source: J1911-2006
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5244 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1911-2006_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.668970Jy  sigma=25.102055
! Fit after  self-cal, rms=0.335742Jy  sigma=4.893788
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8029 mas, bmaj=3.025 mas, bpa=22.53 degrees
! Estimated noise=1.26531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.975223 Jy
! Component: 100  -  total flux cleaned = 1.19463 Jy
! Total flux subtracted in 100 components = 1.19463 Jy
! Clean residual min=-0.031887 max=0.077439 Jy/beam
! Clean residual mean=-0.000039 rms=0.010616 Jy/beam
! Combined flux in latest and established models = 1.19463 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.19463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.181946Jy  sigma=2.585238
! Fit after  self-cal, rms=0.181866Jy  sigma=2.584245
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0832703 Jy
! Component: 100  -  total flux cleaned = 0.131326 Jy
! Total flux subtracted in 100 components = 0.131326 Jy
! Clean residual min=-0.018968 max=0.027111 Jy/beam
! Clean residual mean=-0.000015 rms=0.005571 Jy/beam
! Combined flux in latest and established models = 1.32595 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 1.32595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.115442Jy  sigma=1.604982
! Fit after  self-cal, rms=0.115101Jy  sigma=1.601639
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=3.192 mas, bpa=19.79 degrees
! Estimated noise=0.931519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445693 Jy
! Component: 100  -  total flux cleaned = 0.0709661 Jy
! Component: 150  -  total flux cleaned = 0.089011 Jy
! Component: 200  -  total flux cleaned = 0.101803 Jy
! Total flux subtracted in 200 components = 0.101803 Jy
! Clean residual min=-0.016604 max=0.030334 Jy/beam
! Clean residual mean=0.000012 rms=0.005159 Jy/beam
! Combined flux in latest and established models = 1.42775 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 77 components and 1.42775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.092274Jy  sigma=1.302736
! Fit after  self-cal, rms=0.091986Jy  sigma=1.299614
! Inverting map 
! Added new window around map position (2.8, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274154 Jy
! Component: 100  -  total flux cleaned = 0.0417777 Jy
! Component: 150  -  total flux cleaned = 0.0524231 Jy
! Component: 200  -  total flux cleaned = 0.0606784 Jy
! Total flux subtracted in 200 components = 0.0606784 Jy
! Clean residual min=-0.011598 max=0.018355 Jy/beam
! Clean residual mean=0.000001 rms=0.003616 Jy/beam
! Combined flux in latest and established models = 1.48843 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 116 components and 1.48843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.082067Jy  sigma=1.170950
! Fit after  self-cal, rms=0.080938Jy  sigma=1.149472
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 3.192 at 19.79 degrees (North through East)
! Clean map  min=-0.011188  max=1.2749 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.01     NL        1.01     OV        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.01     KP        0.99     LA        1.00     
!   NL        1.02     OV        0.98     PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     KP        1.00     LA        1.00     
!   NL        1.03     OV        0.97     PT        0.97     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.98     NL        0.98     OV        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.01     KP        1.00     LA        0.99     
!   NL        1.02     OV        0.98     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.00     NL        1.00     OV        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.01     KP        0.99     LA        0.98     
!   NL        1.02     OV        1.00     PT        0.97     SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.99     NL        0.99     OV        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.02     KP        0.98     LA        1.00     
!   NL        1.02     OV        0.98     PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     KP        0.99     LA        0.99     
!   NL        1.05     OV        0.98     PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.00     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.00     KP        0.99     LA        0.99     
!   NL        1.03     OV        1.00     PT        0.96     SC        1.00     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080938Jy  sigma=1.149472
! Fit after  self-cal, rms=0.073838Jy  sigma=1.026581
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=3.201 mas, bpa=19.81 degrees
! Estimated noise=0.932785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00654472 Jy
! Component: 100  -  total flux cleaned = 0.00829204 Jy
! Component: 150  -  total flux cleaned = 0.0100311 Jy
! Component: 200  -  total flux cleaned = 0.0113308 Jy
! Total flux subtracted in 200 components = 0.0113308 Jy
! Clean residual min=-0.009263 max=0.007901 Jy/beam
! Clean residual mean=-0.000004 rms=0.002174 Jy/beam
! Combined flux in latest and established models = 1.49976 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 133 components and 1.49976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072469Jy  sigma=1.009524
! Fit after  self-cal, rms=0.072314Jy  sigma=1.007604
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072314Jy  sigma=1.007604
! Fit after  self-cal, rms=0.072161Jy  sigma=1.005760
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=3.205 mas, bpa=19.84 degrees
! Estimated noise=0.932423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119161 Jy
! Component: 100  -  total flux cleaned = 0.00208956 Jy
! Component: 150  -  total flux cleaned = 0.00270819 Jy
! Component: 200  -  total flux cleaned = 0.00325085 Jy
! Total flux subtracted in 200 components = 0.00325085 Jy
! Clean residual min=-0.008717 max=0.007058 Jy/beam
! Clean residual mean=-0.000005 rms=0.001988 Jy/beam
! Combined flux in latest and established models = 1.50301 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 144 components and 1.50301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071589Jy  sigma=0.998369
! Fit after  self-cal, rms=0.071537Jy  sigma=0.997771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141311 Jy
! Component: 100  -  total flux cleaned = 0.00179104 Jy
! Component: 150  -  total flux cleaned = 0.00204481 Jy
! Component: 200  -  total flux cleaned = 0.00227193 Jy
! Total flux subtracted in 200 components = 0.00227193 Jy
! Clean residual min=-0.008426 max=0.006918 Jy/beam
! Clean residual mean=-0.000006 rms=0.001942 Jy/beam
! Combined flux in latest and established models = 1.50529 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 161 components and 1.50529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071317Jy  sigma=0.994909
! Fit after  self-cal, rms=0.071300Jy  sigma=0.994664
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071300Jy  sigma=0.994664
! Fit after  self-cal, rms=0.071208Jy  sigma=0.992826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=3.209 mas, bpa=19.88 degrees
! Estimated noise=0.93238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111977 Jy
! Component: 100  -  total flux cleaned = -0.000821263 Jy
! Component: 150  -  total flux cleaned = -0.00064604 Jy
! Component: 200  -  total flux cleaned = -0.0005662 Jy
! Total flux subtracted in 200 components = -0.0005662 Jy
! Clean residual min=-0.008016 max=0.006315 Jy/beam
! Clean residual mean=-0.000006 rms=0.001820 Jy/beam
! Combined flux in latest and established models = 1.50472 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 166 components and 1.50472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070949Jy  sigma=0.989358
! Fit after  self-cal, rms=0.070937Jy  sigma=0.989217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567639 Jy
! Component: 100  -  total flux cleaned = 0.000634648 Jy
! Component: 150  -  total flux cleaned = 0.000634911 Jy
! Component: 200  -  total flux cleaned = 0.000574737 Jy
! Total flux subtracted in 200 components = 0.000574737 Jy
! Clean residual min=-0.007785 max=0.006232 Jy/beam
! Clean residual mean=-0.000006 rms=0.001796 Jy/beam
! Combined flux in latest and established models = 1.50529 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 174 components and 1.5053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070821Jy  sigma=0.987617
! Fit after  self-cal, rms=0.070816Jy  sigma=0.987529
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070816Jy  sigma=0.987529
! Fit after  self-cal, rms=0.070778Jy  sigma=0.986510
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.192 mas, bmaj=4.643 mas, bpa=8.101 degrees
! Estimated noise=1.12205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204049 Jy
! Component: 100  -  total flux cleaned = 0.00167399 Jy
! Component: 150  -  total flux cleaned = 0.00124317 Jy
! Component: 200  -  total flux cleaned = 0.000805548 Jy
! Total flux subtracted in 200 components = 0.000805548 Jy
! Clean residual min=-0.008629 max=0.007922 Jy/beam
! Clean residual mean=-0.000007 rms=0.002369 Jy/beam
! Combined flux in latest and established models = 1.5061 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 192 components and 1.5061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070744Jy  sigma=0.985577
! Fit after  self-cal, rms=0.070736Jy  sigma=0.985460
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.79937e-05 Jy
! Component: 100  -  total flux cleaned = -0.000210089 Jy
! Component: 150  -  total flux cleaned = -0.000299779 Jy
! Component: 200  -  total flux cleaned = -0.000471337 Jy
! Total flux subtracted in 200 components = -0.000471337 Jy
! Clean residual min=-0.008534 max=0.007848 Jy/beam
! Clean residual mean=-0.000006 rms=0.002349 Jy/beam
! Combined flux in latest and established models = 1.50563 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 201 components and 1.50563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070706Jy  sigma=0.985042
! Fit after  self-cal, rms=0.070710Jy  sigma=0.985000
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=3.213 mas, bpa=19.9 degrees
! Estimated noise=0.932356 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.04 x 3.213 at 19.9 degrees (North through East)
! Clean map  min=-0.0073232  max=1.27 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070710Jy  sigma=0.985000
! Fit after  self-cal, rms=0.064824Jy  sigma=0.866323
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=3.213 mas, bpa=20 degrees
! Estimated noise=0.929036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00472361 Jy
! Component: 100  -  total flux cleaned = -0.00515266 Jy
! Component: 150  -  total flux cleaned = -0.00482383 Jy
! Component: 200  -  total flux cleaned = -0.00463791 Jy
! Total flux subtracted in 200 components = -0.00463791 Jy
! Clean residual min=-0.006613 max=0.006094 Jy/beam
! Clean residual mean=-0.000005 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 1.50099 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 215 components and 1.50099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064153Jy  sigma=0.858381
! Fit after  self-cal, rms=0.064143Jy  sigma=0.858220
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000447927 Jy
! Component: 100  -  total flux cleaned = 0.00068023 Jy
! Component: 150  -  total flux cleaned = 0.000818811 Jy
! Component: 200  -  total flux cleaned = 0.000948405 Jy
! Total flux subtracted in 200 components = 0.000948405 Jy
! Clean residual min=-0.006192 max=0.005798 Jy/beam
! Clean residual mean=-0.000005 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 1.50194 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 226 components and 1.50194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063969Jy  sigma=0.856188
! Fit after  self-cal, rms=0.063966Jy  sigma=0.856121
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063966Jy  sigma=0.856121
! Fit after  self-cal, rms=0.063634Jy  sigma=0.851710
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8001 mas, bmaj=3.056 mas, bpa=22.75 degrees
! Estimated noise=1.25469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.966929 Jy
! Component: 100  -  total flux cleaned = 1.1884 Jy
! Component: 150  -  total flux cleaned = 1.27188 Jy
! Component: 200  -  total flux cleaned = 1.31684 Jy
! Total flux subtracted in 200 components = 1.31684 Jy
! Clean residual min=-0.016800 max=0.023844 Jy/beam
! Clean residual mean=-0.000010 rms=0.004838 Jy/beam
! Combined flux in latest and established models = 1.31685 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 1.31685 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=3.215 mas, bpa=20.09 degrees
! Estimated noise=0.92666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436361 Jy
! Component: 100  -  total flux cleaned = 0.0718583 Jy
! Component: 150  -  total flux cleaned = 0.0931994 Jy
! Component: 200  -  total flux cleaned = 0.109969 Jy
! Total flux subtracted in 200 components = 0.109969 Jy
! Clean residual min=-0.010669 max=0.011084 Jy/beam
! Clean residual mean=-0.000004 rms=0.002929 Jy/beam
! Combined flux in latest and established models = 1.42681 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 84 components and 1.42681 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.192 mas, bmaj=4.642 mas, bpa=8.25 degrees
! Estimated noise=1.11701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203338 Jy
! Component: 100  -  total flux cleaned = 0.0340816 Jy
! Component: 150  -  total flux cleaned = 0.0441542 Jy
! Component: 200  -  total flux cleaned = 0.0517542 Jy
! Total flux subtracted in 200 components = 0.0517542 Jy
! Clean residual min=-0.008279 max=0.007072 Jy/beam
! Clean residual mean=-0.000007 rms=0.002248 Jy/beam
! Combined flux in latest and established models = 1.47857 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581502 Jy
! Component: 100  -  total flux cleaned = 0.0102999 Jy
! Component: 150  -  total flux cleaned = 0.0137866 Jy
! Component: 200  -  total flux cleaned = 0.0160068 Jy
! Total flux subtracted in 200 components = 0.0160068 Jy
! Clean residual min=-0.007076 max=0.006602 Jy/beam
! Clean residual mean=-0.000009 rms=0.001897 Jy/beam
! Combined flux in latest and established models = 1.49457 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 169 components and 1.49458 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=3.215 mas, bpa=20.09 degrees
! Estimated noise=0.92666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000636756 Jy
! Component: 100  -  total flux cleaned = 8.10864e-05 Jy
! Component: 150  -  total flux cleaned = 0.00049404 Jy
! Component: 200  -  total flux cleaned = 0.00076854 Jy
! Total flux subtracted in 200 components = 0.00076854 Jy
! Clean residual min=-0.006046 max=0.006604 Jy/beam
! Clean residual mean=-0.000005 rms=0.001441 Jy/beam
! Combined flux in latest and established models = 1.49534 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 186 components and 1.49534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063422Jy  sigma=0.851530
! Fit after  self-cal, rms=0.063361Jy  sigma=0.850116
wmodel /scr/pima/bg219e_uvs/J1911-2006_X_map.mod
! Writing 186 model components to file: /scr/pima/bg219e_uvs/J1911-2006_X_map.mod
wobs /scr/pima/bg219e_uvs/J1911-2006_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1911-2006_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1911-2006_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J1911-2006_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000268922 Jy
! Component: 100  -  total flux cleaned = -0.00114896 Jy
! Component: 150  -  total flux cleaned = -0.0016059 Jy
! Component: 200  -  total flux cleaned = -0.00211215 Jy
! Component: 250  -  total flux cleaned = -0.00250688 Jy
! Component: 300  -  total flux cleaned = -0.00265194 Jy
! Component: 350  -  total flux cleaned = -0.00286371 Jy
! Component: 400  -  total flux cleaned = -0.00320365 Jy
! Component: 450  -  total flux cleaned = -0.00327058 Jy
! Component: 500  -  total flux cleaned = -0.00339828 Jy
! Component: 550  -  total flux cleaned = -0.0035185 Jy
! Component: 600  -  total flux cleaned = -0.00369148 Jy
! Component: 650  -  total flux cleaned = -0.00380313 Jy
! Component: 700  -  total flux cleaned = -0.00380311 Jy
! Component: 750  -  total flux cleaned = -0.00375193 Jy
! Component: 800  -  total flux cleaned = -0.00370157 Jy
! Component: 850  -  total flux cleaned = -0.003751 Jy
! Component: 900  -  total flux cleaned = -0.00370365 Jy
! Component: 950  -  total flux cleaned = -0.00370373 Jy
! Component: 1000  -  total flux cleaned = -0.00356675 Jy
! Component: 1050  -  total flux cleaned = -0.00352313 Jy
! Component: 1100  -  total flux cleaned = -0.0034375 Jy
! Component: 1150  -  total flux cleaned = -0.0034793 Jy
! Component: 1200  -  total flux cleaned = -0.00343777 Jy
! Component: 1250  -  total flux cleaned = -0.00327704 Jy
! Component: 1300  -  total flux cleaned = -0.00331641 Jy
! Component: 1350  -  total flux cleaned = -0.0032016 Jy
! Component: 1400  -  total flux cleaned = -0.00316386 Jy
! Component: 1450  -  total flux cleaned = -0.00301732 Jy
! Component: 1500  -  total flux cleaned = -0.0029103 Jy
! Component: 1550  -  total flux cleaned = -0.00287444 Jy
! Component: 1600  -  total flux cleaned = -0.00273578 Jy
! Component: 1650  -  total flux cleaned = -0.00253172 Jy
! Component: 1700  -  total flux cleaned = -0.00239812 Jy
! Component: 1750  -  total flux cleaned = -0.00236489 Jy
! Component: 1800  -  total flux cleaned = -0.00217057 Jy
! Component: 1850  -  total flux cleaned = -0.00197973 Jy
! Component: 1900  -  total flux cleaned = -0.00185445 Jy
! Component: 1950  -  total flux cleaned = -0.00179238 Jy
! Component: 2000  -  total flux cleaned = -0.00173117 Jy
! Component: 2050  -  total flux cleaned = -0.00164064 Jy
! Component: 2100  -  total flux cleaned = -0.00146339 Jy
! Component: 2150  -  total flux cleaned = -0.00137571 Jy
! Component: 2200  -  total flux cleaned = -0.00131795 Jy
! Component: 2250  -  total flux cleaned = -0.00123275 Jy
! Component: 2300  -  total flux cleaned = -0.00109303 Jy
! Component: 2350  -  total flux cleaned = -0.00103813 Jy
! Component: 2400  -  total flux cleaned = -0.00101109 Jy
! Component: 2450  -  total flux cleaned = -0.000903244 Jy
! Component: 2500  -  total flux cleaned = -0.00084988 Jy
! Component: 2550  -  total flux cleaned = -0.000718259 Jy
! Component: 2600  -  total flux cleaned = -0.000639987 Jy
! Component: 2650  -  total flux cleaned = -0.000614023 Jy
! Component: 2700  -  total flux cleaned = -0.000486249 Jy
! Component: 2750  -  total flux cleaned = -0.000384964 Jy
! Component: 2800  -  total flux cleaned = -0.000285309 Jy
! Component: 2850  -  total flux cleaned = -0.000211228 Jy
! Component: 2900  -  total flux cleaned = -8.91373e-05 Jy
! Component: 2950  -  total flux cleaned = -6.50306e-05 Jy
! Component: 3000  -  total flux cleaned = 7.86698e-05 Jy
! Component: 3050  -  total flux cleaned = 0.000173504 Jy
! Component: 3100  -  total flux cleaned = 0.000267168 Jy
! Component: 3150  -  total flux cleaned = 0.000313368 Jy
! Component: 3200  -  total flux cleaned = 0.000359595 Jy
! Component: 3250  -  total flux cleaned = 0.000518881 Jy
! Component: 3300  -  total flux cleaned = 0.000518966 Jy
! Component: 3350  -  total flux cleaned = 0.00063068 Jy
! Component: 3400  -  total flux cleaned = 0.000652956 Jy
! Component: 3450  -  total flux cleaned = 0.000718542 Jy
! Component: 3500  -  total flux cleaned = 0.000762042 Jy
! Component: 3550  -  total flux cleaned = 0.000826909 Jy
! Component: 3600  -  total flux cleaned = 0.000890916 Jy
! Component: 3650  -  total flux cleaned = 0.000954688 Jy
! Component: 3700  -  total flux cleaned = 0.00103888 Jy
! Component: 3750  -  total flux cleaned = 0.00112236 Jy
! Component: 3800  -  total flux cleaned = 0.00120532 Jy
! Component: 3850  -  total flux cleaned = 0.0012466 Jy
! Component: 3900  -  total flux cleaned = 0.00128751 Jy
! Component: 3950  -  total flux cleaned = 0.00132835 Jy
! Component: 4000  -  total flux cleaned = 0.00138913 Jy
! Component: 4050  -  total flux cleaned = 0.00144952 Jy
! Total flux subtracted in 4096 components = 0.00140957 Jy
! Clean residual min=-0.001242 max=0.001301 Jy/beam
! Clean residual mean=0.000000 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 1.49675 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 477 components and 1.49675 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1911-2006_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.037 x 3.215 at 20.09 degrees (North through East)
! Clean map  min=-0.0039866  max=1.2638 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1911-2006_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.26381 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000351206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0833681 0.0833681 0.166736 0.333472 0.666945 1.33389 2.66778 5.33556 10.6711 21.3422 42.6845 85.3689
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.263 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3598.5 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1911-2006_X_uvs.log closed on Thu Apr  7 09:14:47 2016