! Started logfile: /scr/pima/bg219e_uvs/J1911-2006_S_dfm.log on Thu May 19 18:49:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1911-2006_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1911-2006_S_uva.fits
! AN table 1: 13 integrations on 28 of 28 possible baselines.
! AN table 2: 8 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.743197 visibilities/baseline/integration-bin.
! Found source: J1911-2006
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1748 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1911-2006_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.663044Jy  sigma=20.388444
! Fit after  self-cal, rms=0.510589Jy  sigma=5.992335
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.961 mas, bmaj=11.26 mas, bpa=21.79 degrees
! Estimated noise=1.77638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.941312 Jy
! Component: 100  -  total flux cleaned = 1.24435 Jy
! Total flux subtracted in 100 components = 1.24435 Jy
! Clean residual min=-0.050852 max=0.138812 Jy/beam
! Clean residual mean=-0.000071 rms=0.018013 Jy/beam
! Combined flux in latest and established models = 1.24435 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.24435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.335213Jy  sigma=3.834317
! Fit after  self-cal, rms=0.334973Jy  sigma=3.831648
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160058 Jy
! Component: 100  -  total flux cleaned = 0.253818 Jy
! Total flux subtracted in 100 components = 0.253818 Jy
! Clean residual min=-0.030198 max=0.048062 Jy/beam
! Clean residual mean=-0.000041 rms=0.008834 Jy/beam
! Combined flux in latest and established models = 1.49816 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 28 components and 1.49816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185560Jy  sigma=2.100402
! Fit after  self-cal, rms=0.184034Jy  sigma=2.078324
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0614864 Jy
! Component: 100  -  total flux cleaned = 0.101046 Jy
! Total flux subtracted in 100 components = 0.101046 Jy
! Clean residual min=-0.021705 max=0.023828 Jy/beam
! Clean residual mean=-0.000024 rms=0.006267 Jy/beam
! Combined flux in latest and established models = 1.59921 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 61 components and 1.59921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142709Jy  sigma=1.654849
! Fit after  self-cal, rms=0.141963Jy  sigma=1.643696
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.738 mas, bmaj=11.77 mas, bpa=19.44 degrees
! Estimated noise=1.41779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0446465 Jy
! Component: 100  -  total flux cleaned = 0.0721145 Jy
! Component: 150  -  total flux cleaned = 0.0918688 Jy
! Component: 200  -  total flux cleaned = 0.106636 Jy
! Total flux subtracted in 200 components = 0.106636 Jy
! Clean residual min=-0.017828 max=0.016086 Jy/beam
! Clean residual mean=-0.000041 rms=0.004883 Jy/beam
! Combined flux in latest and established models = 1.70585 Jy
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 152 components and 1.70585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119796Jy  sigma=1.447579
! Fit after  self-cal, rms=0.118886Jy  sigma=1.434978
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.738 x 11.77 at 19.44 degrees (North through East)
! Clean map  min=-0.01682  max=1.3094 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.01     NL        1.02     OV        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.01     KP        0.98     LA        1.02     
!   NL        0.89     OV        1.01     PT        0.97     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        1.04     KP        0.98     LA        1.00     
!   NL        1.00     OV        0.98     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.04     KP        0.99     
!   LA        1.00     NL        1.00     OV        0.98     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.02     KP        0.97     LA        1.01     
!   NL        1.00     OV        0.99     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.99     HN        1.01     KP        0.89     
!   LA        0.99     NL        1.01     OV        0.92     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.03     KP        0.98     LA        1.01     
!   NL        0.99     OV        1.01     PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.118886Jy  sigma=1.434978
! Fit after  self-cal, rms=0.091772Jy  sigma=1.222081
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=11.79 mas, bpa=19.39 degrees
! Estimated noise=1.40228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00528142 Jy
! Component: 100  -  total flux cleaned = 0.0107579 Jy
! Component: 150  -  total flux cleaned = 0.0143342 Jy
! Component: 200  -  total flux cleaned = 0.0168167 Jy
! Total flux subtracted in 200 components = 0.0168167 Jy
! Clean residual min=-0.011748 max=0.012759 Jy/beam
! Clean residual mean=0.000007 rms=0.003306 Jy/beam
! Combined flux in latest and established models = 1.72266 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 185 components and 1.72266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089439Jy  sigma=1.185109
! Fit after  self-cal, rms=0.089259Jy  sigma=1.182979
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089259Jy  sigma=1.182979
! Fit after  self-cal, rms=0.088380Jy  sigma=1.177411
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.728 mas, bmaj=11.79 mas, bpa=19.41 degrees
! Estimated noise=1.3962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135948 Jy
! Component: 100  -  total flux cleaned = 0.00347677 Jy
! Component: 150  -  total flux cleaned = 0.00649335 Jy
! Component: 200  -  total flux cleaned = 0.00887084 Jy
! Total flux subtracted in 200 components = 0.00887084 Jy
! Clean residual min=-0.010735 max=0.012638 Jy/beam
! Clean residual mean=0.000006 rms=0.003113 Jy/beam
! Combined flux in latest and established models = 1.73153 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 207 components and 1.73153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087134Jy  sigma=1.153458
! Fit after  self-cal, rms=0.087083Jy  sigma=1.152369
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337221 Jy
! Component: 100  -  total flux cleaned = 0.00488258 Jy
! Component: 150  -  total flux cleaned = 0.00606157 Jy
! Component: 200  -  total flux cleaned = 0.00672409 Jy
! Total flux subtracted in 200 components = 0.00672409 Jy
! Clean residual min=-0.010376 max=0.012219 Jy/beam
! Clean residual mean=0.000011 rms=0.002991 Jy/beam
! Combined flux in latest and established models = 1.73826 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 227 components and 1.73826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086646Jy  sigma=1.144226
! Fit after  self-cal, rms=0.086655Jy  sigma=1.143710
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086655Jy  sigma=1.143710
! Fit after  self-cal, rms=0.085663Jy  sigma=1.136838
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=11.79 mas, bpa=19.42 degrees
! Estimated noise=1.38973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241689 Jy
! Component: 100  -  total flux cleaned = -0.000384994 Jy
! Component: 150  -  total flux cleaned = 0.00136348 Jy
! Component: 200  -  total flux cleaned = 0.00258125 Jy
! Total flux subtracted in 200 components = 0.00258125 Jy
! Clean residual min=-0.010294 max=0.012228 Jy/beam
! Clean residual mean=0.000007 rms=0.002941 Jy/beam
! Combined flux in latest and established models = 1.74084 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 248 components and 1.74084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084988Jy  sigma=1.121817
! Fit after  self-cal, rms=0.084987Jy  sigma=1.121418
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194641 Jy
! Component: 100  -  total flux cleaned = 0.00313342 Jy
! Component: 150  -  total flux cleaned = 0.00396017 Jy
! Component: 200  -  total flux cleaned = 0.00470612 Jy
! Total flux subtracted in 200 components = 0.00470612 Jy
! Clean residual min=-0.010100 max=0.011865 Jy/beam
! Clean residual mean=0.000010 rms=0.002865 Jy/beam
! Combined flux in latest and established models = 1.74554 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 264 components and 1.74554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084720Jy  sigma=1.116157
! Fit after  self-cal, rms=0.084730Jy  sigma=1.115846
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084730Jy  sigma=1.115846
! Fit after  self-cal, rms=0.075105Jy  sigma=0.934792
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.498 mas, bmaj=16.62 mas, bpa=8.235 degrees
! Estimated noise=1.7377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598987 Jy
! Component: 100  -  total flux cleaned = 0.00672923 Jy
! Component: 150  -  total flux cleaned = 0.00655002 Jy
! Component: 200  -  total flux cleaned = 0.00599541 Jy
! Total flux subtracted in 200 components = 0.00599541 Jy
! Clean residual min=-0.007660 max=0.008245 Jy/beam
! Clean residual mean=0.000021 rms=0.002507 Jy/beam
! Combined flux in latest and established models = 1.75154 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 291 components and 1.75154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074830Jy  sigma=0.931906
! Fit after  self-cal, rms=0.074782Jy  sigma=0.930843
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000970628 Jy
! Component: 100  -  total flux cleaned = 0.000340873 Jy
! Component: 150  -  total flux cleaned = 8.46278e-05 Jy
! Component: 200  -  total flux cleaned = -0.000268283 Jy
! Total flux subtracted in 200 components = -0.000268283 Jy
! Clean residual min=-0.007676 max=0.007714 Jy/beam
! Clean residual mean=0.000020 rms=0.002427 Jy/beam
! Combined flux in latest and established models = 1.75127 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 302 components and 1.75127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074721Jy  sigma=0.930761
! Fit after  self-cal, rms=0.074726Jy  sigma=0.930401
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.728 mas, bmaj=11.78 mas, bpa=19.45 degrees
! Estimated noise=1.39147 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.728 x 11.78 at 19.45 degrees (North through East)
! Clean map  min=-0.0061644  max=1.2732 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074726Jy  sigma=0.930401
! Fit after  self-cal, rms=0.067247Jy  sigma=0.801579
! Inverting map and beam 
! Estimated beam: bmin=3.73 mas, bmaj=11.78 mas, bpa=19.44 degrees
! Estimated noise=1.39221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195403 Jy
! Component: 100  -  total flux cleaned = 0.00172364 Jy
! Component: 150  -  total flux cleaned = 0.00151885 Jy
! Component: 200  -  total flux cleaned = 0.00125152 Jy
! Total flux subtracted in 200 components = 0.00125152 Jy
! Clean residual min=-0.005902 max=0.005899 Jy/beam
! Clean residual mean=0.000020 rms=0.001611 Jy/beam
! Combined flux in latest and established models = 1.75252 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 316 components and 1.75252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066910Jy  sigma=0.796644
! Fit after  self-cal, rms=0.066904Jy  sigma=0.796425
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00031696 Jy
! Component: 100  -  total flux cleaned = 0.000238253 Jy
! Component: 150  -  total flux cleaned = -2.61099e-05 Jy
! Component: 200  -  total flux cleaned = -0.000207499 Jy
! Total flux subtracted in 200 components = -0.000207499 Jy
! Clean residual min=-0.005820 max=0.005696 Jy/beam
! Clean residual mean=0.000020 rms=0.001584 Jy/beam
! Combined flux in latest and established models = 1.75231 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 325 components and 1.75231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066766Jy  sigma=0.794627
! Fit after  self-cal, rms=0.066774Jy  sigma=0.794519
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066774Jy  sigma=0.794519
! Fit after  self-cal, rms=0.066739Jy  sigma=0.793827
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.964 mas, bmaj=11.28 mas, bpa=21.76 degrees
! Estimated noise=1.73819 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.919626 Jy
! Component: 100  -  total flux cleaned = 1.21577 Jy
! Component: 150  -  total flux cleaned = 1.37554 Jy
! Component: 200  -  total flux cleaned = 1.469 Jy
! Total flux subtracted in 200 components = 1.469 Jy
! Clean residual min=-0.022332 max=0.048396 Jy/beam
! Clean residual mean=-0.000050 rms=0.007476 Jy/beam
! Combined flux in latest and established models = 1.469 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 1.469 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=11.78 mas, bpa=19.44 degrees
! Estimated noise=1.39274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.087055 Jy
! Component: 100  -  total flux cleaned = 0.137361 Jy
! Component: 150  -  total flux cleaned = 0.1702 Jy
! Component: 200  -  total flux cleaned = 0.193513 Jy
! Total flux subtracted in 200 components = 0.193513 Jy
! Clean residual min=-0.011695 max=0.013204 Jy/beam
! Clean residual mean=-0.000050 rms=0.003483 Jy/beam
! Combined flux in latest and established models = 1.66251 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 99 components and 1.66251 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.497 mas, bmaj=16.63 mas, bpa=8.212 degrees
! Estimated noise=1.73864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270227 Jy
! Component: 100  -  total flux cleaned = 0.0447033 Jy
! Component: 150  -  total flux cleaned = 0.0571325 Jy
! Component: 200  -  total flux cleaned = 0.0633605 Jy
! Total flux subtracted in 200 components = 0.0633605 Jy
! Clean residual min=-0.008192 max=0.008469 Jy/beam
! Clean residual mean=-0.000011 rms=0.002520 Jy/beam
! Combined flux in latest and established models = 1.72587 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00503922 Jy
! Component: 100  -  total flux cleaned = 0.00909698 Jy
! Component: 150  -  total flux cleaned = 0.0120509 Jy
! Component: 200  -  total flux cleaned = 0.0143648 Jy
! Total flux subtracted in 200 components = 0.0143648 Jy
! Clean residual min=-0.006542 max=0.006577 Jy/beam
! Clean residual mean=0.000009 rms=0.002081 Jy/beam
! Combined flux in latest and established models = 1.74024 Jy
! Adding 150 model components to the UV plane model.
! The established model now contains 242 components and 1.74024 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=11.78 mas, bpa=19.44 degrees
! Estimated noise=1.39274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187599 Jy
! Component: 100  -  total flux cleaned = 0.00332632 Jy
! Component: 150  -  total flux cleaned = 0.00406754 Jy
! Component: 200  -  total flux cleaned = 0.00460125 Jy
! Total flux subtracted in 200 components = 0.00460125 Jy
! Clean residual min=-0.006113 max=0.006073 Jy/beam
! Clean residual mean=0.000010 rms=0.001641 Jy/beam
! Combined flux in latest and established models = 1.74484 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 267 components and 1.74484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067106Jy  sigma=0.800213
! Fit after  self-cal, rms=0.067035Jy  sigma=0.798861
wmodel /J1911-2006_S_map.mod
! wmodel: Unable to open new model file: /J1911-2006_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1911-2006_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.731 x 11.78 at 19.44 degrees (North through East)
! Clean map  min=-0.0058743  max=1.2698 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1911-2006_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.26981 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00164355 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.388299 0.388299 0.776598 1.5532 3.10639 6.21278 12.4256 24.8511 49.7023 99.4046
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0049 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.269 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  772.6 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1911-2006_S_dfm.log closed on Thu May 19 18:49:47 2016