! Started logfile: /scr/pima/bg219e_uvs/J1857+1624_X_dfm.log on Thu May 19 18:49:33 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1857+1624_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1857+1624_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.902778 visibilities/baseline/integration-bin.
! Found source: J1857+1624
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22620 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1857+1624_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016607Jy  sigma=24.122615
! Fit after  self-cal, rms=0.826308Jy  sigma=19.570239
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9723 mas, bmaj=2.125 mas, bpa=24.31 degrees
! Estimated noise=0.449571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134579 Jy
! Component: 100  -  total flux cleaned = 0.164105 Jy
! Total flux subtracted in 100 components = 0.164105 Jy
! Clean residual min=-0.005711 max=0.009144 Jy/beam
! Clean residual mean=-0.000006 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.164105 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.164105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063680Jy  sigma=1.438576
! Fit after  self-cal, rms=0.063673Jy  sigma=1.438293
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00991142 Jy
! Component: 100  -  total flux cleaned = 0.0153669 Jy
! Total flux subtracted in 100 components = 0.0153669 Jy
! Clean residual min=-0.004312 max=0.007112 Jy/beam
! Clean residual mean=-0.000004 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.179472 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.179472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061809Jy  sigma=1.387941
! Fit after  self-cal, rms=0.061809Jy  sigma=1.387687
! Inverting map 
! Added new window around map position (1.8, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622095 Jy
! Component: 100  -  total flux cleaned = 0.00976201 Jy
! Total flux subtracted in 100 components = 0.00976201 Jy
! Clean residual min=-0.003542 max=0.003133 Jy/beam
! Clean residual mean=-0.000002 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.189234 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.189234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061086Jy  sigma=1.368923
! Fit after  self-cal, rms=0.061002Jy  sigma=1.366713
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.298 mas, bmaj=2.366 mas, bpa=19.29 degrees
! Estimated noise=0.20836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419485 Jy
! Component: 100  -  total flux cleaned = 0.00679771 Jy
! Component: 150  -  total flux cleaned = 0.00861537 Jy
! Component: 200  -  total flux cleaned = 0.0099142 Jy
! Total flux subtracted in 200 components = 0.0099142 Jy
! Clean residual min=-0.001630 max=0.001934 Jy/beam
! Clean residual mean=-0.000002 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.199149 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 61 components and 0.199149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060680Jy  sigma=1.358393
! Fit after  self-cal, rms=0.060653Jy  sigma=1.357615
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.298 x 2.366 at 19.29 degrees (North through East)
! Clean map  min=-0.0014795  max=0.17478 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.01     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.01     NL        0.98     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        1.00     
!   LA        0.98     NL        0.99     OV        0.98     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.99     NL        1.02     OV        0.98     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.01     
!   LA        1.01     NL        1.01     OV        0.97     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        1.00     
!   LA        1.00     NL        0.99     OV        1.00     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.01     
!   LA        1.02     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        1.01     
!   LA        1.00     NL        0.99     OV        0.99     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.02     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.98     KP        1.01     
!   LA        1.03     NL        1.00     OV        1.01     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.98     KP        1.03     
!   LA        1.00     NL        1.00     OV        0.98     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        1.01     
!   LA        1.00     NL        1.01     OV        1.02     PT        0.97     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.060653Jy  sigma=1.357615
! Fit after  self-cal, rms=0.060489Jy  sigma=1.354177
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.304 mas, bmaj=2.371 mas, bpa=19.19 degrees
! Estimated noise=0.207778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105873 Jy
! Component: 100  -  total flux cleaned = 0.00106597 Jy
! Component: 150  -  total flux cleaned = 0.00104945 Jy
! Component: 200  -  total flux cleaned = 0.0010644 Jy
! Total flux subtracted in 200 components = 0.0010644 Jy
! Clean residual min=-0.001333 max=0.001387 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.200213 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.200213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060469Jy  sigma=1.353686
! Fit after  self-cal, rms=0.060471Jy  sigma=1.353572
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060471Jy  sigma=1.353572
! Fit after  self-cal, rms=0.060523Jy  sigma=1.350064
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.301 mas, bmaj=2.369 mas, bpa=19.31 degrees
! Estimated noise=0.207884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000453504 Jy
! Component: 100  -  total flux cleaned = 0.000529942 Jy
! Component: 150  -  total flux cleaned = 0.00057655 Jy
! Component: 200  -  total flux cleaned = 0.000616109 Jy
! Total flux subtracted in 200 components = 0.000616109 Jy
! Clean residual min=-0.001200 max=0.001243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.200829 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 77 components and 0.200829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060511Jy  sigma=1.349813
! Fit after  self-cal, rms=0.060515Jy  sigma=1.349762
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (32.2, 31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000568525 Jy
! Component: 100  -  total flux cleaned = 0.000540596 Jy
! Component: 150  -  total flux cleaned = 0.000578924 Jy
! Component: 200  -  total flux cleaned = 0.000644437 Jy
! Total flux subtracted in 200 components = 0.000644437 Jy
! Clean residual min=-0.001070 max=0.000942 Jy/beam
! Clean residual mean=-0.000000 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.201473 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 0.201473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060490Jy  sigma=1.349172
! Fit after  self-cal, rms=0.060488Jy  sigma=1.349150
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060488Jy  sigma=1.349150
! Fit after  self-cal, rms=0.060521Jy  sigma=1.349098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.302 mas, bmaj=2.369 mas, bpa=19.33 degrees
! Estimated noise=0.207825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.58809e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157633 Jy
! Component: 150  -  total flux cleaned = 0.000213886 Jy
! Component: 200  -  total flux cleaned = 0.000264241 Jy
! Total flux subtracted in 200 components = 0.000264241 Jy
! Clean residual min=-0.001008 max=0.000921 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.201738 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 101 components and 0.201738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060514Jy  sigma=1.348949
! Fit after  self-cal, rms=0.060515Jy  sigma=1.348942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.09264e-05 Jy
! Component: 100  -  total flux cleaned = 5.08297e-05 Jy
! Component: 150  -  total flux cleaned = 6.19344e-05 Jy
! Component: 200  -  total flux cleaned = 7.20917e-05 Jy
! Total flux subtracted in 200 components = 7.20917e-05 Jy
! Clean residual min=-0.000995 max=0.000913 Jy/beam
! Clean residual mean=-0.000001 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.20181 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.20181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060511Jy  sigma=1.348864
! Fit after  self-cal, rms=0.060510Jy  sigma=1.348861
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060510Jy  sigma=1.348861
! Fit after  self-cal, rms=0.060519Jy  sigma=1.348849
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.31 mas, bmaj=2.91 mas, bpa=2.265 degrees
! Estimated noise=0.233206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.15825e-06 Jy
! Component: 100  -  total flux cleaned = 1.19113e-05 Jy
! Component: 150  -  total flux cleaned = 3.71191e-06 Jy
! Component: 200  -  total flux cleaned = 1.1188e-05 Jy
! Total flux subtracted in 200 components = 1.1188e-05 Jy
! Clean residual min=-0.000987 max=0.000911 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.201821 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 118 components and 0.201821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060518Jy  sigma=1.348819
! Fit after  self-cal, rms=0.060518Jy  sigma=1.348803
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.6903e-05 Jy
! Component: 100  -  total flux cleaned = 6.04626e-05 Jy
! Component: 150  -  total flux cleaned = 7.32205e-05 Jy
! Component: 200  -  total flux cleaned = 8.45778e-05 Jy
! Total flux subtracted in 200 components = 8.45778e-05 Jy
! Clean residual min=-0.000975 max=0.000913 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.201906 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 124 components and 0.201906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060517Jy  sigma=1.348800
! Fit after  self-cal, rms=0.060517Jy  sigma=1.348795
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.302 mas, bmaj=2.369 mas, bpa=19.34 degrees
! Estimated noise=0.2078 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.302 x 2.369 at 19.34 degrees (North through East)
! Clean map  min=-0.00093986  max=0.17426 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9724 mas, bmaj=2.126 mas, bpa=24.42 degrees
! Estimated noise=0.449623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134506 Jy
! Component: 100  -  total flux cleaned = 0.164227 Jy
! Component: 150  -  total flux cleaned = 0.17531 Jy
! Component: 200  -  total flux cleaned = 0.182182 Jy
! Total flux subtracted in 200 components = 0.182182 Jy
! Clean residual min=-0.003829 max=0.003766 Jy/beam
! Clean residual mean=-0.000004 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.182182 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.182182 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.302 mas, bmaj=2.369 mas, bpa=19.34 degrees
! Estimated noise=0.2078 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00638766 Jy
! Component: 100  -  total flux cleaned = 0.0103489 Jy
! Component: 150  -  total flux cleaned = 0.0130182 Jy
! Component: 200  -  total flux cleaned = 0.0148992 Jy
! Total flux subtracted in 200 components = 0.0148992 Jy
! Clean residual min=-0.001395 max=0.001267 Jy/beam
! Clean residual mean=-0.000002 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.197081 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 53 components and 0.197081 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.31 mas, bmaj=2.91 mas, bpa=2.265 degrees
! Estimated noise=0.233206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180789 Jy
! Component: 100  -  total flux cleaned = 0.00285265 Jy
! Component: 150  -  total flux cleaned = 0.00337827 Jy
! Component: 200  -  total flux cleaned = 0.00384263 Jy
! Total flux subtracted in 200 components = 0.00384263 Jy
! Clean residual min=-0.001131 max=0.000983 Jy/beam
! Clean residual mean=-0.000002 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.200924 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273845 Jy
! Component: 100  -  total flux cleaned = 0.000451222 Jy
! Component: 150  -  total flux cleaned = 0.0006317 Jy
! Component: 200  -  total flux cleaned = 0.000722675 Jy
! Total flux subtracted in 200 components = 0.000722675 Jy
! Clean residual min=-0.001029 max=0.000971 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.201647 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 98 components and 0.201647 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.302 mas, bmaj=2.369 mas, bpa=19.34 degrees
! Estimated noise=0.2078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.9305e-05 Jy
! Component: 100  -  total flux cleaned = 0.000132651 Jy
! Component: 150  -  total flux cleaned = 0.000244965 Jy
! Component: 200  -  total flux cleaned = 0.00029633 Jy
! Total flux subtracted in 200 components = 0.00029633 Jy
! Clean residual min=-0.001085 max=0.000954 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.201943 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 115 components and 0.201943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060539Jy  sigma=1.349272
! Fit after  self-cal, rms=0.060537Jy  sigma=1.349240
wmodel /J1857+1624_X_map.mod
! wmodel: Unable to open new model file: /J1857+1624_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1857+1624_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.302 x 2.369 at 19.34 degrees (North through East)
! Clean map  min=-0.0010226  max=0.17433 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1857+1624_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.17433 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245127 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.421834 0.421834 0.843668 1.68734 3.37467 6.74934 13.4987 26.9974 53.9947
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  711.18 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1857+1624_X_dfm.log closed on Thu May 19 18:49:36 2016