! Started logfile: /scr/pima/bg219e_uvs/J1848+3219_S_uvs.log on Thu Apr  7 06:49:41 2016
obs /scr/pima/bg219e_uvs/J1848+3219_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1848+3219_S_uva.fits
! AN table 1: 22 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.698232 visibilities/baseline/integration-bin.
! Found source: J1848+3219
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2212 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1848+3219_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.502148Jy  sigma=22.985099
! Fit after  self-cal, rms=0.185700Jy  sigma=2.961223
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.876 mas, bmaj=8.364 mas, bpa=-7.246 degrees
! Estimated noise=1.29951 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.917001 Jy
! Component: 100  -  total flux cleaned = 1.11697 Jy
! Total flux subtracted in 100 components = 1.11697 Jy
! Clean residual min=-0.013793 max=0.055768 Jy/beam
! Clean residual mean=-0.000013 rms=0.005073 Jy/beam
! Combined flux in latest and established models = 1.11697 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.11697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087647Jy  sigma=1.383566
! Fit after  self-cal, rms=0.087648Jy  sigma=1.383483
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436869 Jy
! Component: 100  -  total flux cleaned = 0.0574018 Jy
! Total flux subtracted in 100 components = 0.0574018 Jy
! Clean residual min=-0.010162 max=0.011384 Jy/beam
! Clean residual mean=-0.000010 rms=0.002532 Jy/beam
! Combined flux in latest and established models = 1.17437 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.17437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066503Jy  sigma=0.998624
! Fit after  self-cal, rms=0.066482Jy  sigma=0.998382
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.508 mas, bmaj=8.949 mas, bpa=-9.151 degrees
! Estimated noise=1.05288 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00837646 Jy
! Component: 100  -  total flux cleaned = 0.011421 Jy
! Component: 150  -  total flux cleaned = 0.0127443 Jy
! Component: 200  -  total flux cleaned = 0.013372 Jy
! Total flux subtracted in 200 components = 0.013372 Jy
! Clean residual min=-0.007697 max=0.007408 Jy/beam
! Clean residual mean=0.000009 rms=0.002116 Jy/beam
! Combined flux in latest and established models = 1.18774 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 1.18774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065596Jy  sigma=0.977774
! Fit after  self-cal, rms=0.065569Jy  sigma=0.977477
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.508 x 8.949 at -9.151 degrees (North through East)
! Clean map  min=-0.0076742  max=1.1754 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.99     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.99     KP        0.99     
!   LA        1.01     NL        1.00     OV        0.99     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.01     NL        0.98     OV        0.99     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.96     KP        1.00     
!   LA        1.02     NL        0.99     OV        1.02     PT        1.02     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.065569Jy  sigma=0.977477
! Fit after  self-cal, rms=0.061363Jy  sigma=0.891894
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.508 mas, bmaj=8.935 mas, bpa=-9.347 degrees
! Estimated noise=1.05113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312694 Jy
! Component: 100  -  total flux cleaned = 0.00343997 Jy
! Component: 150  -  total flux cleaned = 0.0037662 Jy
! Component: 200  -  total flux cleaned = 0.00402046 Jy
! Total flux subtracted in 200 components = 0.00402046 Jy
! Clean residual min=-0.006223 max=0.005289 Jy/beam
! Clean residual mean=0.000005 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 1.19176 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 1.19176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060938Jy  sigma=0.887308
! Fit after  self-cal, rms=0.060944Jy  sigma=0.887230
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060944Jy  sigma=0.887230
! Fit after  self-cal, rms=0.058338Jy  sigma=0.843733
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.504 mas, bmaj=8.94 mas, bpa=-9.339 degrees
! Estimated noise=1.05143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122343 Jy
! Component: 100  -  total flux cleaned = 0.00127039 Jy
! Component: 150  -  total flux cleaned = 0.00123868 Jy
! Component: 200  -  total flux cleaned = 0.00112512 Jy
! Total flux subtracted in 200 components = 0.00112512 Jy
! Clean residual min=-0.004735 max=0.005279 Jy/beam
! Clean residual mean=0.000016 rms=0.001277 Jy/beam
! Combined flux in latest and established models = 1.19289 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 1.19289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058270Jy  sigma=0.842970
! Fit after  self-cal, rms=0.058274Jy  sigma=0.842931
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.64272e-05 Jy
! Component: 100  -  total flux cleaned = -0.000130627 Jy
! Component: 150  -  total flux cleaned = -0.000153132 Jy
! Component: 200  -  total flux cleaned = -0.000153784 Jy
! Total flux subtracted in 200 components = -0.000153784 Jy
! Clean residual min=-0.004715 max=0.005244 Jy/beam
! Clean residual mean=0.000016 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 1.19273 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 1.19273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058254Jy  sigma=0.842673
! Fit after  self-cal, rms=0.058255Jy  sigma=0.842666
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058255Jy  sigma=0.842666
! Fit after  self-cal, rms=0.058237Jy  sigma=0.842502
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.502 mas, bmaj=8.939 mas, bpa=-9.357 degrees
! Estimated noise=1.05143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000508266 Jy
! Component: 100  -  total flux cleaned = 0.000406795 Jy
! Component: 150  -  total flux cleaned = 0.00033645 Jy
! Component: 200  -  total flux cleaned = 0.000250699 Jy
! Total flux subtracted in 200 components = 0.000250699 Jy
! Clean residual min=-0.004683 max=0.005242 Jy/beam
! Clean residual mean=0.000016 rms=0.001269 Jy/beam
! Combined flux in latest and established models = 1.19298 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 1.19298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058216Jy  sigma=0.842195
! Fit after  self-cal, rms=0.058216Jy  sigma=0.842188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.45364e-05 Jy
! Component: 100  -  total flux cleaned = -3.42674e-05 Jy
! Component: 150  -  total flux cleaned = -7.23739e-05 Jy
! Component: 200  -  total flux cleaned = -8.9907e-05 Jy
! Total flux subtracted in 200 components = -8.9907e-05 Jy
! Clean residual min=-0.004672 max=0.005217 Jy/beam
! Clean residual mean=0.000016 rms=0.001267 Jy/beam
! Combined flux in latest and established models = 1.19289 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 63 components and 1.19289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058204Jy  sigma=0.842029
! Fit after  self-cal, rms=0.058204Jy  sigma=0.842026
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058204Jy  sigma=0.842026
! Fit after  self-cal, rms=0.058195Jy  sigma=0.841966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.976 mas, bmaj=10.05 mas, bpa=-14.84 degrees
! Estimated noise=1.16234 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214824 Jy
! Component: 100  -  total flux cleaned = 0.000157749 Jy
! Component: 150  -  total flux cleaned = 0.000124393 Jy
! Component: 200  -  total flux cleaned = 0.000107746 Jy
! Total flux subtracted in 200 components = 0.000107746 Jy
! Clean residual min=-0.005666 max=0.006314 Jy/beam
! Clean residual mean=0.000025 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 1.193 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 1.193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058184Jy  sigma=0.842130
! Fit after  self-cal, rms=0.058182Jy  sigma=0.842109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.54534e-07 Jy
! Component: 100  -  total flux cleaned = 1.36414e-05 Jy
! Component: 150  -  total flux cleaned = -7.85205e-07 Jy
! Component: 200  -  total flux cleaned = -1.03093e-06 Jy
! Total flux subtracted in 200 components = -1.03093e-06 Jy
! Clean residual min=-0.005697 max=0.006299 Jy/beam
! Clean residual mean=0.000025 rms=0.001640 Jy/beam
! Combined flux in latest and established models = 1.193 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 74 components and 1.193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058178Jy  sigma=0.842138
! Fit after  self-cal, rms=0.058177Jy  sigma=0.842136
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.502 mas, bmaj=8.939 mas, bpa=-9.372 degrees
! Estimated noise=1.05137 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.502 x 8.939 at -9.372 degrees (North through East)
! Clean map  min=-0.0048336  max=1.1742 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058177Jy  sigma=0.842136
! Fit after  self-cal, rms=0.052919Jy  sigma=0.733804
! Inverting map and beam 
! Estimated beam: bmin=5.502 mas, bmaj=8.939 mas, bpa=-9.361 degrees
! Estimated noise=1.05115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000248478 Jy
! Component: 100  -  total flux cleaned = -0.000204116 Jy
! Component: 150  -  total flux cleaned = -0.000163862 Jy
! Component: 200  -  total flux cleaned = -0.000163302 Jy
! Total flux subtracted in 200 components = -0.000163302 Jy
! Clean residual min=-0.004379 max=0.004902 Jy/beam
! Clean residual mean=0.000012 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 1.19284 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 1.19284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052904Jy  sigma=0.733456
! Fit after  self-cal, rms=0.052904Jy  sigma=0.733446
! Inverting map 
! Added new window around map position (10, -75.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465156 Jy
! Component: 100  -  total flux cleaned = 0.00714736 Jy
! Component: 150  -  total flux cleaned = 0.00796691 Jy
! Component: 200  -  total flux cleaned = 0.00855198 Jy
! Total flux subtracted in 200 components = 0.00855198 Jy
! Clean residual min=-0.004103 max=0.003672 Jy/beam
! Clean residual mean=0.000011 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 1.20139 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 1.20139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052429Jy  sigma=0.725185
! Fit after  self-cal, rms=0.052428Jy  sigma=0.724716
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052428Jy  sigma=0.724716
! Fit after  self-cal, rms=0.052320Jy  sigma=0.724028
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.866 mas, bmaj=8.359 mas, bpa=-7.44 degrees
! Estimated noise=1.29727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.915417 Jy
! Component: 100  -  total flux cleaned = 1.11504 Jy
! Component: 150  -  total flux cleaned = 1.15882 Jy
! Component: 200  -  total flux cleaned = 1.17288 Jy
! Total flux subtracted in 200 components = 1.17288 Jy
! Clean residual min=-0.005542 max=0.006417 Jy/beam
! Clean residual mean=0.000009 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 1.17288 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 1.17288 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.501 mas, bmaj=8.939 mas, bpa=-9.359 degrees
! Estimated noise=1.05059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00908555 Jy
! Component: 100  -  total flux cleaned = 0.014982 Jy
! Component: 150  -  total flux cleaned = 0.0193762 Jy
! Component: 200  -  total flux cleaned = 0.022815 Jy
! Total flux subtracted in 200 components = 0.022815 Jy
! Clean residual min=-0.004230 max=0.004225 Jy/beam
! Clean residual mean=0.000012 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 1.1957 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 42 components and 1.1957 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.975 mas, bmaj=10.05 mas, bpa=-14.8 degrees
! Estimated noise=1.1616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032919 Jy
! Component: 100  -  total flux cleaned = 0.00481425 Jy
! Component: 150  -  total flux cleaned = 0.00574061 Jy
! Component: 200  -  total flux cleaned = 0.00638826 Jy
! Total flux subtracted in 200 components = 0.00638826 Jy
! Clean residual min=-0.004236 max=0.004129 Jy/beam
! Clean residual mean=0.000017 rms=0.001252 Jy/beam
! Combined flux in latest and established models = 1.20209 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000625872 Jy
! Component: 100  -  total flux cleaned = 0.00106418 Jy
! Component: 150  -  total flux cleaned = 0.00140284 Jy
! Component: 200  -  total flux cleaned = 0.00166365 Jy
! Total flux subtracted in 200 components = 0.00166365 Jy
! Clean residual min=-0.004144 max=0.003966 Jy/beam
! Clean residual mean=0.000017 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 1.20375 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 87 components and 1.20375 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.501 mas, bmaj=8.939 mas, bpa=-9.359 degrees
! Estimated noise=1.05059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744975 Jy
! Component: 100  -  total flux cleaned = 0.000980449 Jy
! Component: 150  -  total flux cleaned = 0.00102098 Jy
! Component: 200  -  total flux cleaned = 0.0010589 Jy
! Total flux subtracted in 200 components = 0.0010589 Jy
! Clean residual min=-0.004074 max=0.003679 Jy/beam
! Clean residual mean=0.000011 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 1.20481 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 110 components and 1.20481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052310Jy  sigma=0.723586
! Fit after  self-cal, rms=0.052322Jy  sigma=0.723328
wmodel /scr/pima/bg219e_uvs/J1848+3219_S_map.mod
! Writing 110 model components to file: /scr/pima/bg219e_uvs/J1848+3219_S_map.mod
wobs /scr/pima/bg219e_uvs/J1848+3219_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1848+3219_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J1848+3219_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J1848+3219_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000402377 Jy
! Component: 100  -  total flux cleaned = -0.000661533 Jy
! Component: 150  -  total flux cleaned = -0.000660179 Jy
! Component: 200  -  total flux cleaned = -0.000776358 Jy
! Component: 250  -  total flux cleaned = -0.000776695 Jy
! Component: 300  -  total flux cleaned = -0.000775373 Jy
! Component: 350  -  total flux cleaned = -0.000514273 Jy
! Component: 400  -  total flux cleaned = -0.000213367 Jy
! Component: 450  -  total flux cleaned = -6.69461e-05 Jy
! Component: 500  -  total flux cleaned = 0.000171761 Jy
! Component: 550  -  total flux cleaned = 0.00035769 Jy
! Component: 600  -  total flux cleaned = 0.000313212 Jy
! Component: 650  -  total flux cleaned = 0.000533306 Jy
! Component: 700  -  total flux cleaned = 0.000617516 Jy
! Component: 750  -  total flux cleaned = 0.000574831 Jy
! Component: 800  -  total flux cleaned = 0.000574686 Jy
! Component: 850  -  total flux cleaned = 0.000654485 Jy
! Component: 900  -  total flux cleaned = 0.000536691 Jy
! Component: 950  -  total flux cleaned = 0.000537758 Jy
! Component: 1000  -  total flux cleaned = 0.000462593 Jy
! Component: 1050  -  total flux cleaned = 0.000351518 Jy
! Component: 1100  -  total flux cleaned = 0.000314618 Jy
! Component: 1150  -  total flux cleaned = 0.000100671 Jy
! Component: 1200  -  total flux cleaned = 3.12772e-05 Jy
! Component: 1250  -  total flux cleaned = 0.000100414 Jy
! Component: 1300  -  total flux cleaned = -0.000102593 Jy
! Component: 1350  -  total flux cleaned = -3.49713e-05 Jy
! Component: 1400  -  total flux cleaned = -6.7493e-05 Jy
! Component: 1450  -  total flux cleaned = -0.000163901 Jy
! Component: 1500  -  total flux cleaned = -0.00010039 Jy
! Component: 1550  -  total flux cleaned = -0.000194277 Jy
! Component: 1600  -  total flux cleaned = -0.000255266 Jy
! Component: 1650  -  total flux cleaned = -0.000224206 Jy
! Component: 1700  -  total flux cleaned = -0.000224217 Jy
! Component: 1750  -  total flux cleaned = -0.000253731 Jy
! Component: 1800  -  total flux cleaned = -0.000224318 Jy
! Component: 1850  -  total flux cleaned = -0.000281399 Jy
! Component: 1900  -  total flux cleaned = -0.000421625 Jy
! Component: 1950  -  total flux cleaned = -0.000310496 Jy
! Component: 2000  -  total flux cleaned = -0.000392602 Jy
! Component: 2050  -  total flux cleaned = -0.000473845 Jy
! Component: 2100  -  total flux cleaned = -0.000607398 Jy
! Component: 2150  -  total flux cleaned = -0.000607024 Jy
! Component: 2200  -  total flux cleaned = -0.000633435 Jy
! Component: 2250  -  total flux cleaned = -0.000710812 Jy
! Component: 2300  -  total flux cleaned = -0.000685475 Jy
! Component: 2350  -  total flux cleaned = -0.000635639 Jy
! Component: 2400  -  total flux cleaned = -0.000734956 Jy
! Component: 2450  -  total flux cleaned = -0.000710277 Jy
! Component: 2500  -  total flux cleaned = -0.000734295 Jy
! Component: 2550  -  total flux cleaned = -0.000710093 Jy
! Component: 2600  -  total flux cleaned = -0.000615259 Jy
! Component: 2650  -  total flux cleaned = -0.00068588 Jy
! Component: 2700  -  total flux cleaned = -0.000685712 Jy
! Component: 2750  -  total flux cleaned = -0.00066263 Jy
! Component: 2800  -  total flux cleaned = -0.000730736 Jy
! Component: 2850  -  total flux cleaned = -0.000640561 Jy
! Component: 2900  -  total flux cleaned = -0.000662989 Jy
! Component: 2950  -  total flux cleaned = -0.000619049 Jy
! Component: 3000  -  total flux cleaned = -0.000641056 Jy
! Component: 3050  -  total flux cleaned = -0.000749056 Jy
! Component: 3100  -  total flux cleaned = -0.000620813 Jy
! Component: 3150  -  total flux cleaned = -0.000663494 Jy
! Component: 3200  -  total flux cleaned = -0.000684234 Jy
! Component: 3250  -  total flux cleaned = -0.000621802 Jy
! Component: 3300  -  total flux cleaned = -0.000621662 Jy
! Component: 3350  -  total flux cleaned = -0.000581015 Jy
! Component: 3400  -  total flux cleaned = -0.000661739 Jy
! Component: 3450  -  total flux cleaned = -0.000601847 Jy
! Component: 3500  -  total flux cleaned = -0.000621721 Jy
! Component: 3550  -  total flux cleaned = -0.000699969 Jy
! Component: 3600  -  total flux cleaned = -0.000621808 Jy
! Component: 3650  -  total flux cleaned = -0.00062202 Jy
! Component: 3700  -  total flux cleaned = -0.00056445 Jy
! Component: 3750  -  total flux cleaned = -0.000583713 Jy
! Component: 3800  -  total flux cleaned = -0.000583687 Jy
! Component: 3850  -  total flux cleaned = -0.000602434 Jy
! Component: 3900  -  total flux cleaned = -0.000602557 Jy
! Component: 3950  -  total flux cleaned = -0.000676148 Jy
! Component: 4000  -  total flux cleaned = -0.000657885 Jy
! Component: 4050  -  total flux cleaned = -0.00060346 Jy
! Total flux subtracted in 4096 components = -0.000621675 Jy
! Clean residual min=-0.000998 max=0.000982 Jy/beam
! Clean residual mean=0.000006 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 1.20419 Jy
keep
! Adding 321 model components to the UV plane model.
! The established model now contains 431 components and 1.20419 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1848+3219_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.501 x 8.939 at -9.359 degrees (North through East)
! Clean map  min=-0.0028595  max=1.1734 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1848+3219_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.17337 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000351062 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0897571 0.0897571 0.179514 0.359029 0.718057 1.43611 2.87223 5.74446 11.4889 22.9778 45.9557 91.9113
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.173 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3342.35 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1848+3219_S_uvs.log closed on Thu Apr  7 06:49:45 2016