! Started logfile: /scr/pima/bg219e_uvs/J1838-3427_S_uvs.log on Thu Apr  7 06:49:36 2016
obs /scr/pima/bg219e_uvs/J1838-3427_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1838-3427_S_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.81705 visibilities/baseline/integration-bin.
! Found source: J1838-3427
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6824 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1838-3427_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022140Jy  sigma=15.715744
! Fit after  self-cal, rms=0.819936Jy  sigma=12.400155
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.911 mas, bmaj=14.01 mas, bpa=19.39 degrees
! Estimated noise=0.941205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136456 Jy
! Component: 100  -  total flux cleaned = 0.172821 Jy
! Total flux subtracted in 100 components = 0.172821 Jy
! Clean residual min=-0.009097 max=0.016920 Jy/beam
! Clean residual mean=-0.000090 rms=0.002911 Jy/beam
! Combined flux in latest and established models = 0.172821 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.172821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104743Jy  sigma=1.530657
! Fit after  self-cal, rms=0.104687Jy  sigma=1.529581
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206353 Jy
! Component: 100  -  total flux cleaned = 0.034192 Jy
! Total flux subtracted in 100 components = 0.034192 Jy
! Clean residual min=-0.007132 max=0.009027 Jy/beam
! Clean residual mean=-0.000051 rms=0.002007 Jy/beam
! Combined flux in latest and established models = 0.207013 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 51 components and 0.207013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098589Jy  sigma=1.402386
! Fit after  self-cal, rms=0.098603Jy  sigma=1.401840
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.977 mas, bmaj=16.7 mas, bpa=17.27 degrees
! Estimated noise=0.585231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158483 Jy
! Component: 100  -  total flux cleaned = 0.0244634 Jy
! Component: 150  -  total flux cleaned = 0.0294599 Jy
! Component: 200  -  total flux cleaned = 0.0323864 Jy
! Total flux subtracted in 200 components = 0.0323864 Jy
! Clean residual min=-0.005617 max=0.008343 Jy/beam
! Clean residual mean=-0.000060 rms=0.001720 Jy/beam
! Combined flux in latest and established models = 0.2394 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 104 components and 0.2394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096529Jy  sigma=1.353447
! Fit after  self-cal, rms=0.096530Jy  sigma=1.352996
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.977 x 16.7 at 17.27 degrees (North through East)
! Clean map  min=-0.0054808  max=0.17649 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.10     KP        1.02     
!   LA        1.01     NL        1.06     OV        0.99     PT        0.95     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.96     NL        1.15     OV        0.97     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.00     KP        1.02     
!   LA        0.95     NL        1.10     OV        0.96     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.01     KP        0.97     
!   LA        0.99     NL        1.15     OV        1.00     PT        0.98     
!   SC        1.04     
! 
! 
! Fit before self-cal, rms=0.096530Jy  sigma=1.352996
! Fit after  self-cal, rms=0.098778Jy  sigma=1.340333
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.99 mas, bmaj=16.97 mas, bpa=17.39 degrees
! Estimated noise=0.587306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00224826 Jy
! Component: 100  -  total flux cleaned = -0.00216209 Jy
! Component: 150  -  total flux cleaned = -0.00201376 Jy
! Component: 200  -  total flux cleaned = -0.00201276 Jy
! Total flux subtracted in 200 components = -0.00201276 Jy
! Clean residual min=-0.004663 max=0.005950 Jy/beam
! Clean residual mean=-0.000028 rms=0.001463 Jy/beam
! Combined flux in latest and established models = 0.237387 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 113 components and 0.237387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098615Jy  sigma=1.338545
! Fit after  self-cal, rms=0.098684Jy  sigma=1.338343
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098684Jy  sigma=1.338343
! Fit after  self-cal, rms=0.099890Jy  sigma=1.331354
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.996 mas, bmaj=17.04 mas, bpa=17.45 degrees
! Estimated noise=0.587314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00175893 Jy
! Component: 100  -  total flux cleaned = -0.00214625 Jy
! Component: 150  -  total flux cleaned = -0.00235966 Jy
! Component: 200  -  total flux cleaned = -0.00235851 Jy
! Total flux subtracted in 200 components = -0.00235851 Jy
! Clean residual min=-0.004380 max=0.005840 Jy/beam
! Clean residual mean=-0.000030 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.235028 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 126 components and 0.235028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099798Jy  sigma=1.330345
! Fit after  self-cal, rms=0.099817Jy  sigma=1.330259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00512033 Jy
! Component: 100  -  total flux cleaned = 0.00589183 Jy
! Component: 150  -  total flux cleaned = 0.00604382 Jy
! Component: 200  -  total flux cleaned = 0.00617231 Jy
! Total flux subtracted in 200 components = 0.00617231 Jy
! Clean residual min=-0.003869 max=0.004859 Jy/beam
! Clean residual mean=-0.000014 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 0.241201 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 161 components and 0.241201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099495Jy  sigma=1.326303
! Fit after  self-cal, rms=0.099457Jy  sigma=1.325703
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099457Jy  sigma=1.325703
! Fit after  self-cal, rms=0.100449Jy  sigma=1.324312
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.998 mas, bmaj=17.11 mas, bpa=17.54 degrees
! Estimated noise=0.58655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000831275 Jy
! Component: 100  -  total flux cleaned = 0.000611679 Jy
! Component: 150  -  total flux cleaned = 0.000329512 Jy
! Component: 200  -  total flux cleaned = 0.00022937 Jy
! Total flux subtracted in 200 components = 0.00022937 Jy
! Clean residual min=-0.003829 max=0.004688 Jy/beam
! Clean residual mean=-0.000016 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.24143 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 189 components and 0.24143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100326Jy  sigma=1.323082
! Fit after  self-cal, rms=0.100331Jy  sigma=1.322893
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (95.5, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325046 Jy
! Component: 100  -  total flux cleaned = 0.00370239 Jy
! Component: 150  -  total flux cleaned = 0.00392402 Jy
! Component: 200  -  total flux cleaned = 0.0040499 Jy
! Total flux subtracted in 200 components = 0.0040499 Jy
! Clean residual min=-0.003751 max=0.003119 Jy/beam
! Clean residual mean=-0.000030 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.24548 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 217 components and 0.24548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100105Jy  sigma=1.319836
! Fit after  self-cal, rms=0.100099Jy  sigma=1.319603
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100099Jy  sigma=1.319603
! Fit after  self-cal, rms=0.099953Jy  sigma=1.319208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.03 mas, bmaj=29.78 mas, bpa=6.658 degrees
! Estimated noise=0.644084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114646 Jy
! Component: 100  -  total flux cleaned = -0.000100828 Jy
! Component: 150  -  total flux cleaned = -0.000164288 Jy
! Component: 200  -  total flux cleaned = -0.000331133 Jy
! Total flux subtracted in 200 components = -0.000331133 Jy
! Clean residual min=-0.003408 max=0.003918 Jy/beam
! Clean residual mean=-0.000040 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.245149 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 248 components and 0.245149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099885Jy  sigma=1.318153
! Fit after  self-cal, rms=0.099878Jy  sigma=1.318044
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.52566e-05 Jy
! Component: 100  -  total flux cleaned = -7.98713e-05 Jy
! Component: 150  -  total flux cleaned = -0.000214144 Jy
! Component: 200  -  total flux cleaned = -0.000383351 Jy
! Total flux subtracted in 200 components = -0.000383351 Jy
! Clean residual min=-0.003176 max=0.003853 Jy/beam
! Clean residual mean=-0.000040 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.244766 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 282 components and 0.244766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099844Jy  sigma=1.317613
! Fit after  self-cal, rms=0.099842Jy  sigma=1.317562
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=17.15 mas, bpa=17.55 degrees
! Estimated noise=0.584831 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.006 x 17.15 at 17.55 degrees (North through East)
! Clean map  min=-0.0034892  max=0.17693 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.909 mas, bmaj=14.34 mas, bpa=19.56 degrees
! Estimated noise=0.955046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138156 Jy
! Component: 100  -  total flux cleaned = 0.173476 Jy
! Component: 150  -  total flux cleaned = 0.192237 Jy
! Component: 200  -  total flux cleaned = 0.204339 Jy
! Total flux subtracted in 200 components = 0.204339 Jy
! Clean residual min=-0.006056 max=0.006828 Jy/beam
! Clean residual mean=-0.000045 rms=0.001678 Jy/beam
! Combined flux in latest and established models = 0.204339 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.204339 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=17.15 mas, bpa=17.55 degrees
! Estimated noise=0.584831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014161 Jy
! Component: 100  -  total flux cleaned = 0.0223119 Jy
! Component: 150  -  total flux cleaned = 0.0281026 Jy
! Component: 200  -  total flux cleaned = 0.0323797 Jy
! Total flux subtracted in 200 components = 0.0323797 Jy
! Clean residual min=-0.004067 max=0.003886 Jy/beam
! Clean residual mean=-0.000045 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.236719 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 121 components and 0.236719 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.03 mas, bmaj=29.78 mas, bpa=6.658 degrees
! Estimated noise=0.644084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384167 Jy
! Component: 100  -  total flux cleaned = 0.0052661 Jy
! Component: 150  -  total flux cleaned = 0.00574359 Jy
! Component: 200  -  total flux cleaned = 0.00615765 Jy
! Total flux subtracted in 200 components = 0.00615765 Jy
! Clean residual min=-0.003801 max=0.004311 Jy/beam
! Clean residual mean=-0.000049 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 0.242876 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141133 Jy
! Component: 100  -  total flux cleaned = 0.000268571 Jy
! Component: 150  -  total flux cleaned = 0.000445899 Jy
! Component: 200  -  total flux cleaned = 0.000604597 Jy
! Total flux subtracted in 200 components = 0.000604597 Jy
! Clean residual min=-0.003356 max=0.004061 Jy/beam
! Clean residual mean=-0.000042 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 0.243481 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 177 components and 0.243481 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=17.15 mas, bpa=17.55 degrees
! Estimated noise=0.584831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141825 Jy
! Component: 100  -  total flux cleaned = 0.00149401 Jy
! Component: 150  -  total flux cleaned = 0.00143434 Jy
! Component: 200  -  total flux cleaned = 0.00126035 Jy
! Total flux subtracted in 200 components = 0.00126035 Jy
! Clean residual min=-0.003210 max=0.003369 Jy/beam
! Clean residual mean=-0.000029 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.244741 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 197 components and 0.244741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099830Jy  sigma=1.317886
! Fit after  self-cal, rms=0.099796Jy  sigma=1.317620
wmodel /scr/pima/bg219e_uvs/J1838-3427_S_map.mod
! Writing 197 model components to file: /scr/pima/bg219e_uvs/J1838-3427_S_map.mod
wobs /scr/pima/bg219e_uvs/J1838-3427_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1838-3427_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J1838-3427_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J1838-3427_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.02578e-05 Jy
! Component: 100  -  total flux cleaned = -0.000662993 Jy
! Component: 150  -  total flux cleaned = -0.00128286 Jy
! Component: 200  -  total flux cleaned = -0.00177391 Jy
! Component: 250  -  total flux cleaned = -0.00210152 Jy
! Component: 300  -  total flux cleaned = -0.00255011 Jy
! Component: 350  -  total flux cleaned = -0.0027226 Jy
! Component: 400  -  total flux cleaned = -0.00288975 Jy
! Component: 450  -  total flux cleaned = -0.00309273 Jy
! Component: 500  -  total flux cleaned = -0.00332918 Jy
! Component: 550  -  total flux cleaned = -0.00340539 Jy
! Component: 600  -  total flux cleaned = -0.00355479 Jy
! Component: 650  -  total flux cleaned = -0.00370119 Jy
! Component: 700  -  total flux cleaned = -0.00395143 Jy
! Component: 750  -  total flux cleaned = -0.00416112 Jy
! Component: 800  -  total flux cleaned = -0.00429929 Jy
! Component: 850  -  total flux cleaned = -0.00460224 Jy
! Component: 900  -  total flux cleaned = -0.00489881 Jy
! Component: 950  -  total flux cleaned = -0.00512561 Jy
! Component: 1000  -  total flux cleaned = -0.0054123 Jy
! Component: 1050  -  total flux cleaned = -0.00566227 Jy
! Component: 1100  -  total flux cleaned = -0.00581619 Jy
! Component: 1150  -  total flux cleaned = -0.00599784 Jy
! Component: 1200  -  total flux cleaned = -0.00617645 Jy
! Component: 1250  -  total flux cleaned = -0.00635234 Jy
! Component: 1300  -  total flux cleaned = -0.00658258 Jy
! Component: 1350  -  total flux cleaned = -0.00672427 Jy
! Component: 1400  -  total flux cleaned = -0.00689173 Jy
! Component: 1450  -  total flux cleaned = -0.00719349 Jy
! Component: 1500  -  total flux cleaned = -0.00743648 Jy
! Component: 1550  -  total flux cleaned = -0.00754354 Jy
! Component: 1600  -  total flux cleaned = -0.00775448 Jy
! Component: 1650  -  total flux cleaned = -0.00796187 Jy
! Component: 1700  -  total flux cleaned = -0.00808976 Jy
! Component: 1750  -  total flux cleaned = -0.00826672 Jy
! Component: 1800  -  total flux cleaned = -0.00836645 Jy
! Component: 1850  -  total flux cleaned = -0.00851445 Jy
! Component: 1900  -  total flux cleaned = -0.00861258 Jy
! Component: 1950  -  total flux cleaned = -0.0088288 Jy
! Component: 2000  -  total flux cleaned = -0.00885183 Jy
! Component: 2050  -  total flux cleaned = -0.00903959 Jy
! Component: 2100  -  total flux cleaned = -0.00915532 Jy
! Component: 2150  -  total flux cleaned = -0.00924679 Jy
! Component: 2200  -  total flux cleaned = -0.00933752 Jy
! Component: 2250  -  total flux cleaned = -0.00942713 Jy
! Component: 2300  -  total flux cleaned = -0.00953759 Jy
! Component: 2350  -  total flux cleaned = -0.00960361 Jy
! Component: 2400  -  total flux cleaned = -0.00969017 Jy
! Component: 2450  -  total flux cleaned = -0.00981808 Jy
! Component: 2500  -  total flux cleaned = -0.00983892 Jy
! Component: 2550  -  total flux cleaned = -0.00992234 Jy
! Component: 2600  -  total flux cleaned = -0.00996368 Jy
! Component: 2650  -  total flux cleaned = -0.0100656 Jy
! Component: 2700  -  total flux cleaned = -0.010126 Jy
! Component: 2750  -  total flux cleaned = -0.0101658 Jy
! Component: 2800  -  total flux cleaned = -0.0102449 Jy
! Component: 2850  -  total flux cleaned = -0.010245 Jy
! Component: 2900  -  total flux cleaned = -0.0103226 Jy
! Component: 2950  -  total flux cleaned = -0.0104382 Jy
! Component: 3000  -  total flux cleaned = -0.0104572 Jy
! Component: 3050  -  total flux cleaned = -0.0104947 Jy
! Component: 3100  -  total flux cleaned = -0.0104761 Jy
! Component: 3150  -  total flux cleaned = -0.0104207 Jy
! Component: 3200  -  total flux cleaned = -0.0104392 Jy
! Component: 3250  -  total flux cleaned = -0.0104212 Jy
! Component: 3300  -  total flux cleaned = -0.0104392 Jy
! Component: 3350  -  total flux cleaned = -0.0104392 Jy
! Component: 3400  -  total flux cleaned = -0.010404 Jy
! Component: 3450  -  total flux cleaned = -0.0104742 Jy
! Component: 3500  -  total flux cleaned = -0.0104395 Jy
! Component: 3550  -  total flux cleaned = -0.0104396 Jy
! Component: 3600  -  total flux cleaned = -0.0104226 Jy
! Component: 3650  -  total flux cleaned = -0.0104906 Jy
! Component: 3700  -  total flux cleaned = -0.0104905 Jy
! Component: 3750  -  total flux cleaned = -0.0105073 Jy
! Component: 3800  -  total flux cleaned = -0.0104239 Jy
! Component: 3850  -  total flux cleaned = -0.0105065 Jy
! Component: 3900  -  total flux cleaned = -0.0104899 Jy
! Component: 3950  -  total flux cleaned = -0.0104736 Jy
! Component: 4000  -  total flux cleaned = -0.0104088 Jy
! Component: 4050  -  total flux cleaned = -0.0104412 Jy
! Total flux subtracted in 4096 components = -0.0104413 Jy
! Clean residual min=-0.001056 max=0.000899 Jy/beam
! Clean residual mean=-0.000004 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.2343 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 483 components and 0.2343 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1838-3427_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.006 x 17.15 at 17.55 degrees (North through East)
! Clean map  min=-0.0030454  max=0.18095 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1838-3427_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.180947 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000322004 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.533866 0.533866 1.06773 2.13547 4.27093 8.54186 17.0837 34.1675 68.3349
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.18 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  561.938 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1838-3427_S_uvs.log closed on Thu Apr  7 06:49:41 2016