! Started logfile: /scr/pima/bg219e_uvs/J1800+7828_X_dfm.log on Thu May 19 18:49:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1800+7828_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1800+7828_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J1800+7828
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5184 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.201514Jy  sigma=34.164732
! Fit after  self-cal, rms=1.038820Jy  sigma=15.778656
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9647 mas, bmaj=1.318 mas, bpa=63.32 degrees
! Estimated noise=1.02223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.37788 Jy
! Component: 100  -  total flux cleaned = 1.77472 Jy
! Total flux subtracted in 100 components = 1.77472 Jy
! Clean residual min=-0.065757 max=0.190380 Jy/beam
! Clean residual mean=-0.000032 rms=0.019646 Jy/beam
! Combined flux in latest and established models = 1.77472 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.77472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.425134Jy  sigma=6.279549
! Fit after  self-cal, rms=0.420889Jy  sigma=6.201992
! Inverting map 
! Added new window around map position (-1.4, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.21801 Jy
! Component: 100  -  total flux cleaned = 0.338628 Jy
! Total flux subtracted in 100 components = 0.338628 Jy
! Clean residual min=-0.032675 max=0.064918 Jy/beam
! Clean residual mean=-0.000014 rms=0.008203 Jy/beam
! Combined flux in latest and established models = 2.11335 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 2.11335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.203332Jy  sigma=2.973902
! Fit after  self-cal, rms=0.195148Jy  sigma=2.816131
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0775233 Jy
! Component: 100  -  total flux cleaned = 0.121688 Jy
! Total flux subtracted in 100 components = 0.121688 Jy
! Clean residual min=-0.020236 max=0.029350 Jy/beam
! Clean residual mean=-0.000008 rms=0.004471 Jy/beam
! Combined flux in latest and established models = 2.23504 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 2.23504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.133836Jy  sigma=1.922413
! Fit after  self-cal, rms=0.132324Jy  sigma=1.887024
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326809 Jy
! Component: 100  -  total flux cleaned = 0.0539357 Jy
! Total flux subtracted in 100 components = 0.0539357 Jy
! Clean residual min=-0.015783 max=0.017911 Jy/beam
! Clean residual mean=-0.000005 rms=0.003415 Jy/beam
! Combined flux in latest and established models = 2.28897 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 32 components and 2.28897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114178Jy  sigma=1.637069
! Fit after  self-cal, rms=0.113784Jy  sigma=1.626134
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.173 mas, bmaj=1.552 mas, bpa=61.85 degrees
! Estimated noise=0.677753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330903 Jy
! Component: 100  -  total flux cleaned = 0.0541505 Jy
! Component: 150  -  total flux cleaned = 0.0692004 Jy
! Component: 200  -  total flux cleaned = 0.0800838 Jy
! Total flux subtracted in 200 components = 0.0800838 Jy
! Clean residual min=-0.012085 max=0.019317 Jy/beam
! Clean residual mean=0.000014 rms=0.003539 Jy/beam
! Combined flux in latest and established models = 2.36906 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 56 components and 2.36906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099643Jy  sigma=1.438339
! Fit after  self-cal, rms=0.099524Jy  sigma=1.435214
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.173 x 1.552 at 61.85 degrees (North through East)
! Clean map  min=-0.011781  max=1.8437 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        0.97     
!   LA        1.00     NL        1.01     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.01     OV        1.00     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.97     
!   LA        0.99     NL        0.99     OV        0.99     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.98     NL        1.00     OV        1.01     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.97     
!   LA        0.99     NL        1.01     OV        1.00     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.97     NL        1.02     OV        1.01     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.03     KP        0.97     
!   LA        1.00     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.99     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.99     NL        1.01     OV        1.02     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.98     NL        1.02     OV        0.99     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.099524Jy  sigma=1.435214
! Fit after  self-cal, rms=0.093227Jy  sigma=1.276313
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.175 mas, bmaj=1.556 mas, bpa=61.81 degrees
! Estimated noise=0.676304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170961 Jy
! Component: 100  -  total flux cleaned = 0.0276982 Jy
! Component: 150  -  total flux cleaned = 0.0350407 Jy
! Component: 200  -  total flux cleaned = 0.0389887 Jy
! Total flux subtracted in 200 components = 0.0389887 Jy
! Clean residual min=-0.008032 max=0.011705 Jy/beam
! Clean residual mean=0.000000 rms=0.002011 Jy/beam
! Combined flux in latest and established models = 2.40804 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 80 components and 2.40805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088530Jy  sigma=1.221612
! Fit after  self-cal, rms=0.088291Jy  sigma=1.217068
! Inverting map 
! Added new window around map position (31.2, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107128 Jy
! Component: 100  -  total flux cleaned = 0.0164993 Jy
! Component: 150  -  total flux cleaned = 0.0191416 Jy
! Component: 200  -  total flux cleaned = 0.019724 Jy
! Total flux subtracted in 200 components = 0.019724 Jy
! Clean residual min=-0.007214 max=0.006975 Jy/beam
! Clean residual mean=-0.000006 rms=0.001695 Jy/beam
! Combined flux in latest and established models = 2.42777 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 102 components and 2.42777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086557Jy  sigma=1.194267
! Fit after  self-cal, rms=0.086390Jy  sigma=1.192001
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086390Jy  sigma=1.192001
! Fit after  self-cal, rms=0.082062Jy  sigma=1.133416
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.175 mas, bmaj=1.556 mas, bpa=61.72 degrees
! Estimated noise=0.6756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000795625 Jy
! Component: 100  -  total flux cleaned = 0.000944429 Jy
! Component: 150  -  total flux cleaned = 0.00130404 Jy
! Component: 200  -  total flux cleaned = 0.00141314 Jy
! Total flux subtracted in 200 components = 0.00141314 Jy
! Clean residual min=-0.005785 max=0.006159 Jy/beam
! Clean residual mean=-0.000002 rms=0.001415 Jy/beam
! Combined flux in latest and established models = 2.42918 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 116 components and 2.42918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081589Jy  sigma=1.127003
! Fit after  self-cal, rms=0.081579Jy  sigma=1.126769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.8, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00506225 Jy
! Component: 100  -  total flux cleaned = 0.0056521 Jy
! Component: 150  -  total flux cleaned = 0.00671973 Jy
! Component: 200  -  total flux cleaned = 0.00776724 Jy
! Total flux subtracted in 200 components = 0.00776724 Jy
! Clean residual min=-0.005819 max=0.005817 Jy/beam
! Clean residual mean=-0.000004 rms=0.001291 Jy/beam
! Combined flux in latest and established models = 2.43695 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 136 components and 2.43695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081038Jy  sigma=1.117910
! Fit after  self-cal, rms=0.080989Jy  sigma=1.117440
! Inverting map 
! Added new window around map position (-17, 9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107236 Jy
! Component: 100  -  total flux cleaned = 0.00142389 Jy
! Component: 150  -  total flux cleaned = 0.00252553 Jy
! Component: 200  -  total flux cleaned = 0.00331511 Jy
! Total flux subtracted in 200 components = 0.00331511 Jy
! Clean residual min=-0.005202 max=0.005167 Jy/beam
! Clean residual mean=-0.000003 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 2.44026 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 150 components and 2.44026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080517Jy  sigma=1.108551
! Fit after  self-cal, rms=0.080507Jy  sigma=1.107927
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080507Jy  sigma=1.107927
! Fit after  self-cal, rms=0.080207Jy  sigma=1.105332
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.175 mas, bmaj=1.557 mas, bpa=61.63 degrees
! Estimated noise=0.67501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.74962e-05 Jy
! Component: 100  -  total flux cleaned = 0.000450019 Jy
! Component: 150  -  total flux cleaned = 0.00091756 Jy
! Component: 200  -  total flux cleaned = 0.0010027 Jy
! Total flux subtracted in 200 components = 0.0010027 Jy
! Clean residual min=-0.004789 max=0.005081 Jy/beam
! Clean residual mean=-0.000002 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 2.44127 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 160 components and 2.44127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079945Jy  sigma=1.101404
! Fit after  self-cal, rms=0.079939Jy  sigma=1.101149
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.8, 6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374813 Jy
! Component: 100  -  total flux cleaned = 0.0045737 Jy
! Component: 150  -  total flux cleaned = 0.00545018 Jy
! Component: 200  -  total flux cleaned = 0.00623733 Jy
! Total flux subtracted in 200 components = 0.00623733 Jy
! Clean residual min=-0.004108 max=0.003893 Jy/beam
! Clean residual mean=-0.000006 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 2.4475 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 181 components and 2.4475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079558Jy  sigma=1.095606
! Fit after  self-cal, rms=0.079534Jy  sigma=1.095311
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079534Jy  sigma=1.095311
! Fit after  self-cal, rms=0.079412Jy  sigma=1.094379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.275 mas, bmaj=2.541 mas, bpa=71.51 degrees
! Estimated noise=0.886703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275065 Jy
! Component: 100  -  total flux cleaned = 0.00149858 Jy
! Component: 150  -  total flux cleaned = 0.00238963 Jy
! Component: 200  -  total flux cleaned = 0.00311341 Jy
! Total flux subtracted in 200 components = 0.00311341 Jy
! Clean residual min=-0.004704 max=0.004961 Jy/beam
! Clean residual mean=-0.000020 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 2.45062 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 204 components and 2.45062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079246Jy  sigma=1.092806
! Fit after  self-cal, rms=0.079237Jy  sigma=1.092545
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000774659 Jy
! Component: 100  -  total flux cleaned = 0.00162118 Jy
! Component: 150  -  total flux cleaned = 0.0022009 Jy
! Component: 200  -  total flux cleaned = 0.00249771 Jy
! Total flux subtracted in 200 components = 0.00249771 Jy
! Clean residual min=-0.004444 max=0.004778 Jy/beam
! Clean residual mean=-0.000022 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 2.45312 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 215 components and 2.45312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079167Jy  sigma=1.091708
! Fit after  self-cal, rms=0.079165Jy  sigma=1.091661
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.175 mas, bmaj=1.558 mas, bpa=61.54 degrees
! Estimated noise=0.674712 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.175 x 1.558 at 61.54 degrees (North through East)
! Clean map  min=-0.004115  max=1.8372 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079165Jy  sigma=1.091661
! Fit after  self-cal, rms=0.070326Jy  sigma=0.935687
! Inverting map and beam 
! Estimated beam: bmin=1.174 mas, bmaj=1.559 mas, bpa=61.42 degrees
! Estimated noise=0.67374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00300248 Jy
! Component: 100  -  total flux cleaned = -0.00241212 Jy
! Component: 150  -  total flux cleaned = -0.000901136 Jy
! Component: 200  -  total flux cleaned = -1.12837e-05 Jy
! Total flux subtracted in 200 components = -1.12837e-05 Jy
! Clean residual min=-0.004096 max=0.004826 Jy/beam
! Clean residual mean=-0.000023 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 2.4531 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 231 components and 2.4531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069966Jy  sigma=0.931114
! Fit after  self-cal, rms=0.069960Jy  sigma=0.930993
! Inverting map 
! Added new window around map position (6.4, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389653 Jy
! Component: 100  -  total flux cleaned = 0.00514062 Jy
! Component: 150  -  total flux cleaned = 0.00560801 Jy
! Component: 200  -  total flux cleaned = 0.0061981 Jy
! Total flux subtracted in 200 components = 0.0061981 Jy
! Clean residual min=-0.003559 max=0.004280 Jy/beam
! Clean residual mean=-0.000024 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 2.4593 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 251 components and 2.4593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069514Jy  sigma=0.924920
! Fit after  self-cal, rms=0.069487Jy  sigma=0.924579
! Inverting map 
! Added new window around map position (15, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361002 Jy
! Component: 100  -  total flux cleaned = 0.00506709 Jy
! Component: 150  -  total flux cleaned = 0.00587219 Jy
! Component: 200  -  total flux cleaned = 0.00661583 Jy
! Total flux subtracted in 200 components = 0.00661583 Jy
! Clean residual min=-0.003457 max=0.003831 Jy/beam
! Clean residual mean=-0.000020 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 2.46592 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 271 components and 2.46592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069205Jy  sigma=0.920578
! Fit after  self-cal, rms=0.069196Jy  sigma=0.920354
! Inverting map 
! Added new window around map position (-20, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265201 Jy
! Component: 100  -  total flux cleaned = 0.00339317 Jy
! Component: 150  -  total flux cleaned = 0.00452711 Jy
! Component: 200  -  total flux cleaned = 0.0057903 Jy
! Total flux subtracted in 200 components = 0.0057903 Jy
! Clean residual min=-0.003452 max=0.003166 Jy/beam
! Clean residual mean=-0.000016 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 2.47171 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 289 components and 2.47171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068952Jy  sigma=0.916717
! Fit after  self-cal, rms=0.068940Jy  sigma=0.916562
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068940Jy  sigma=0.916562
! Fit after  self-cal, rms=0.068574Jy  sigma=0.912761
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9627 mas, bmaj=1.322 mas, bpa=62.84 degrees
! Estimated noise=1.02035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.37291 Jy
! Component: 100  -  total flux cleaned = 1.79253 Jy
! Component: 150  -  total flux cleaned = 2.00343 Jy
! Component: 200  -  total flux cleaned = 2.12257 Jy
! Total flux subtracted in 200 components = 2.12257 Jy
! Clean residual min=-0.024685 max=0.058751 Jy/beam
! Clean residual mean=-0.000014 rms=0.006675 Jy/beam
! Combined flux in latest and established models = 2.12257 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 2.12257 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.174 mas, bmaj=1.56 mas, bpa=61.29 degrees
! Estimated noise=0.673056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0939007 Jy
! Component: 100  -  total flux cleaned = 0.143624 Jy
! Component: 150  -  total flux cleaned = 0.171926 Jy
! Component: 200  -  total flux cleaned = 0.191787 Jy
! Total flux subtracted in 200 components = 0.191787 Jy
! Clean residual min=-0.011345 max=0.013201 Jy/beam
! Clean residual mean=-0.000010 rms=0.002909 Jy/beam
! Combined flux in latest and established models = 2.31436 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 37 components and 2.31436 Jy
! Inverting map 
! Added new window around map position (-3.4, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156928 Jy
! Component: 100  -  total flux cleaned = 0.0257743 Jy
! Component: 150  -  total flux cleaned = 0.0338285 Jy
! Component: 200  -  total flux cleaned = 0.0419464 Jy
! Total flux subtracted in 200 components = 0.0419464 Jy
! Clean residual min=-0.008204 max=0.007905 Jy/beam
! Clean residual mean=-0.000013 rms=0.002058 Jy/beam
! Combined flux in latest and established models = 2.35631 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 81 components and 2.35631 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=2.544 mas, bpa=71.14 degrees
! Estimated noise=0.884251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142269 Jy
! Component: 100  -  total flux cleaned = 0.0248021 Jy
! Component: 150  -  total flux cleaned = 0.0335872 Jy
! Component: 200  -  total flux cleaned = 0.0413695 Jy
! Total flux subtracted in 200 components = 0.0413695 Jy
! Clean residual min=-0.008180 max=0.007590 Jy/beam
! Clean residual mean=-0.000035 rms=0.002357 Jy/beam
! Combined flux in latest and established models = 2.39768 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00701019 Jy
! Component: 100  -  total flux cleaned = 0.013106 Jy
! Component: 150  -  total flux cleaned = 0.0184148 Jy
! Component: 200  -  total flux cleaned = 0.0232717 Jy
! Total flux subtracted in 200 components = 0.0232717 Jy
! Clean residual min=-0.006685 max=0.005987 Jy/beam
! Clean residual mean=-0.000036 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 2.42095 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 169 components and 2.42095 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.174 mas, bmaj=1.56 mas, bpa=61.29 degrees
! Estimated noise=0.673056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409975 Jy
! Component: 100  -  total flux cleaned = 0.00776287 Jy
! Component: 150  -  total flux cleaned = 0.0114508 Jy
! Component: 200  -  total flux cleaned = 0.0148329 Jy
! Total flux subtracted in 200 components = 0.0148329 Jy
! Clean residual min=-0.004839 max=0.004637 Jy/beam
! Clean residual mean=-0.000015 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 2.43578 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 200 components and 2.43578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070016Jy  sigma=0.940923
! Fit after  self-cal, rms=0.070006Jy  sigma=0.938667
wmodel /J1800+7828_X_map.mod
! wmodel: Unable to open new model file: /J1800+7828_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1800+7828_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.174 x 1.56 at 61.29 degrees (North through East)
! Clean map  min=-0.0055545  max=1.8353 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1800+7828_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.83527 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00114829 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.187704 0.187704 0.375408 0.750815 1.50163 3.00326 6.00652 12.013 24.0261 48.0522 96.1044
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0034 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.835 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1598.26 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1800+7828_X_dfm.log closed on Thu May 19 18:49:05 2016