! Started logfile: /scr/pima/bg219e_uvs/J1743-0350_X_dfm.log on Thu May 19 18:48:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1743-0350_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1743-0350_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.880952 visibilities/baseline/integration-bin.
! Found source: J1743-0350
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5328 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1743-0350_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=3.347183Jy  sigma=39.087670
! Fit after  self-cal, rms=2.193389Jy  sigma=25.546199
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9211 mas, bmaj=2.498 mas, bpa=21.88 degrees
! Estimated noise=1.26678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.40263 Jy
! Component: 100  -  total flux cleaned = 2.93406 Jy
! Total flux subtracted in 100 components = 2.93406 Jy
! Clean residual min=-0.060687 max=0.177931 Jy/beam
! Clean residual mean=0.000480 rms=0.018973 Jy/beam
! Combined flux in latest and established models = 2.93406 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.93406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.380909Jy  sigma=4.248570
! Fit after  self-cal, rms=0.380775Jy  sigma=4.247503
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191248 Jy
! Component: 100  -  total flux cleaned = 0.307806 Jy
! Total flux subtracted in 100 components = 0.307806 Jy
! Clean residual min=-0.032242 max=0.062241 Jy/beam
! Clean residual mean=0.000218 rms=0.008940 Jy/beam
! Combined flux in latest and established models = 3.24186 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 3.24186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.208390Jy  sigma=2.263125
! Fit after  self-cal, rms=0.207658Jy  sigma=2.254830
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0771008 Jy
! Component: 100  -  total flux cleaned = 0.128214 Jy
! Total flux subtracted in 100 components = 0.128214 Jy
! Clean residual min=-0.022616 max=0.031795 Jy/beam
! Clean residual mean=0.000109 rms=0.006002 Jy/beam
! Combined flux in latest and established models = 3.37008 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 3.37008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157380Jy  sigma=1.669431
! Fit after  self-cal, rms=0.157078Jy  sigma=1.665987
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.627 mas, bpa=19.3 degrees
! Estimated noise=0.952136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0543487 Jy
! Component: 100  -  total flux cleaned = 0.0860809 Jy
! Component: 150  -  total flux cleaned = 0.105392 Jy
! Component: 200  -  total flux cleaned = 0.117926 Jy
! Total flux subtracted in 200 components = 0.117926 Jy
! Clean residual min=-0.017346 max=0.018251 Jy/beam
! Clean residual mean=-0.000010 rms=0.004368 Jy/beam
! Combined flux in latest and established models = 3.488 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 55 components and 3.488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135822Jy  sigma=1.406244
! Fit after  self-cal, rms=0.135613Jy  sigma=1.403231
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 2.627 at 19.3 degrees (North through East)
! Clean map  min=-0.016369  max=3.1437 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.99     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.98     
!   LA        1.00     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.01     NL        1.01     OV        1.00     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.01     OV        1.01     PT        1.00     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.135613Jy  sigma=1.403231
! Fit after  self-cal, rms=0.130826Jy  sigma=1.272954
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.088 mas, bmaj=2.631 mas, bpa=19.31 degrees
! Estimated noise=0.950038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0070417 Jy
! Component: 100  -  total flux cleaned = -0.00876887 Jy
! Component: 150  -  total flux cleaned = -0.0102515 Jy
! Component: 200  -  total flux cleaned = -0.011392 Jy
! Total flux subtracted in 200 components = -0.011392 Jy
! Clean residual min=-0.015351 max=0.017530 Jy/beam
! Clean residual mean=-0.000022 rms=0.003607 Jy/beam
! Combined flux in latest and established models = 3.47661 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 3.47661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.130158Jy  sigma=1.266433
! Fit after  self-cal, rms=0.130076Jy  sigma=1.265252
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.130076Jy  sigma=1.265252
! Fit after  self-cal, rms=0.118425Jy  sigma=1.120097
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.089 mas, bmaj=2.635 mas, bpa=19.31 degrees
! Estimated noise=0.949601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0021586 Jy
! Component: 100  -  total flux cleaned = -0.00379926 Jy
! Component: 150  -  total flux cleaned = -0.00423357 Jy
! Component: 200  -  total flux cleaned = -0.00410494 Jy
! Total flux subtracted in 200 components = -0.00410494 Jy
! Clean residual min=-0.010781 max=0.009701 Jy/beam
! Clean residual mean=0.000003 rms=0.002369 Jy/beam
! Combined flux in latest and established models = 3.47251 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 71 components and 3.47251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117807Jy  sigma=1.113729
! Fit after  self-cal, rms=0.117742Jy  sigma=1.112673
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000944645 Jy
! Component: 100  -  total flux cleaned = 0.000573291 Jy
! Component: 150  -  total flux cleaned = 0.000274295 Jy
! Component: 200  -  total flux cleaned = 0.000276545 Jy
! Total flux subtracted in 200 components = 0.000276545 Jy
! Clean residual min=-0.010278 max=0.009521 Jy/beam
! Clean residual mean=0.000003 rms=0.002330 Jy/beam
! Combined flux in latest and established models = 3.47278 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 3.47278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117476Jy  sigma=1.110305
! Fit after  self-cal, rms=0.117435Jy  sigma=1.109639
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117435Jy  sigma=1.109639
! Fit after  self-cal, rms=0.117135Jy  sigma=1.107690
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.089 mas, bmaj=2.636 mas, bpa=19.32 degrees
! Estimated noise=0.949081 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197714 Jy
! Component: 100  -  total flux cleaned = -0.0032244 Jy
! Component: 150  -  total flux cleaned = -0.00417676 Jy
! Component: 200  -  total flux cleaned = -0.00426857 Jy
! Total flux subtracted in 200 components = -0.00426857 Jy
! Clean residual min=-0.009834 max=0.009400 Jy/beam
! Clean residual mean=0.000002 rms=0.002270 Jy/beam
! Combined flux in latest and established models = 3.46851 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 3.46851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116812Jy  sigma=1.104696
! Fit after  self-cal, rms=0.116786Jy  sigma=1.104237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672378 Jy
! Component: 100  -  total flux cleaned = 0.000501626 Jy
! Component: 150  -  total flux cleaned = 0.000359705 Jy
! Component: 200  -  total flux cleaned = 0.000424104 Jy
! Total flux subtracted in 200 components = 0.000424104 Jy
! Clean residual min=-0.009610 max=0.009276 Jy/beam
! Clean residual mean=0.000002 rms=0.002252 Jy/beam
! Combined flux in latest and established models = 3.46894 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 3.46894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116652Jy  sigma=1.103172
! Fit after  self-cal, rms=0.116635Jy  sigma=1.102880
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116635Jy  sigma=1.102880
! Fit after  self-cal, rms=0.116472Jy  sigma=1.101657
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=3.343 mas, bpa=6.151 degrees
! Estimated noise=1.19154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00359593 Jy
! Component: 100  -  total flux cleaned = -0.00402781 Jy
! Component: 150  -  total flux cleaned = -0.00440387 Jy
! Component: 200  -  total flux cleaned = -0.0045003 Jy
! Total flux subtracted in 200 components = -0.0045003 Jy
! Clean residual min=-0.011040 max=0.012357 Jy/beam
! Clean residual mean=0.000005 rms=0.003103 Jy/beam
! Combined flux in latest and established models = 3.46444 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 3.46444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116371Jy  sigma=1.100863
! Fit after  self-cal, rms=0.116357Jy  sigma=1.100565
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.38941e-05 Jy
! Component: 100  -  total flux cleaned = -1.80678e-05 Jy
! Component: 150  -  total flux cleaned = 1.86133e-05 Jy
! Component: 200  -  total flux cleaned = 4.9672e-05 Jy
! Total flux subtracted in 200 components = 4.9672e-05 Jy
! Clean residual min=-0.010921 max=0.012301 Jy/beam
! Clean residual mean=0.000005 rms=0.003098 Jy/beam
! Combined flux in latest and established models = 3.46449 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 87 components and 3.46449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116336Jy  sigma=1.100420
! Fit after  self-cal, rms=0.116328Jy  sigma=1.100234
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.089 mas, bmaj=2.637 mas, bpa=19.33 degrees
! Estimated noise=0.948498 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.089 x 2.637 at 19.33 degrees (North through East)
! Clean map  min=-0.0088842  max=3.1272 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116328Jy  sigma=1.100234
! Fit after  self-cal, rms=0.081254Jy  sigma=0.722331
! Inverting map and beam 
! Estimated beam: bmin=1.09 mas, bmaj=2.639 mas, bpa=19.32 degrees
! Estimated noise=0.948869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0018136 Jy
! Component: 100  -  total flux cleaned = -0.00258346 Jy
! Component: 150  -  total flux cleaned = -0.00284793 Jy
! Component: 200  -  total flux cleaned = -0.00285239 Jy
! Total flux subtracted in 200 components = -0.00285239 Jy
! Clean residual min=-0.008434 max=0.008127 Jy/beam
! Clean residual mean=-0.000008 rms=0.001951 Jy/beam
! Combined flux in latest and established models = 3.46163 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 89 components and 3.46163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081006Jy  sigma=0.718600
! Fit after  self-cal, rms=0.080996Jy  sigma=0.718420
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167237 Jy
! Component: 100  -  total flux cleaned = 0.00017133 Jy
! Component: 150  -  total flux cleaned = 0.000110328 Jy
! Component: 200  -  total flux cleaned = 0.000108983 Jy
! Total flux subtracted in 200 components = 0.000108983 Jy
! Clean residual min=-0.008531 max=0.008087 Jy/beam
! Clean residual mean=-0.000008 rms=0.001939 Jy/beam
! Combined flux in latest and established models = 3.46174 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 3.46174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080899Jy  sigma=0.717095
! Fit after  self-cal, rms=0.080893Jy  sigma=0.716981
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080893Jy  sigma=0.716981
! Fit after  self-cal, rms=0.080675Jy  sigma=0.715844
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9215 mas, bmaj=2.51 mas, bpa=21.88 degrees
! Estimated noise=1.2672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.40323 Jy
! Component: 100  -  total flux cleaned = 2.9346 Jy
! Component: 150  -  total flux cleaned = 3.12192 Jy
! Component: 200  -  total flux cleaned = 3.23113 Jy
! Total flux subtracted in 200 components = 3.23113 Jy
! Clean residual min=-0.025073 max=0.057935 Jy/beam
! Clean residual mean=0.000195 rms=0.007455 Jy/beam
! Combined flux in latest and established models = 3.23113 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 3.23113 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.09 mas, bmaj=2.64 mas, bpa=19.33 degrees
! Estimated noise=0.94885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0919496 Jy
! Component: 100  -  total flux cleaned = 0.145074 Jy
! Component: 150  -  total flux cleaned = 0.177267 Jy
! Component: 200  -  total flux cleaned = 0.197736 Jy
! Total flux subtracted in 200 components = 0.197736 Jy
! Clean residual min=-0.012049 max=0.011725 Jy/beam
! Clean residual mean=0.000028 rms=0.002530 Jy/beam
! Combined flux in latest and established models = 3.42887 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 50 components and 3.42887 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.106 mas, bmaj=3.344 mas, bpa=6.175 degrees
! Estimated noise=1.19064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163441 Jy
! Component: 100  -  total flux cleaned = 0.0240047 Jy
! Component: 150  -  total flux cleaned = 0.0278927 Jy
! Component: 200  -  total flux cleaned = 0.0284783 Jy
! Total flux subtracted in 200 components = 0.0284783 Jy
! Clean residual min=-0.009904 max=0.010239 Jy/beam
! Clean residual mean=-0.000009 rms=0.002745 Jy/beam
! Combined flux in latest and established models = 3.45735 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240011 Jy
! Component: 100  -  total flux cleaned = 0.000457027 Jy
! Component: 150  -  total flux cleaned = 0.000588658 Jy
! Component: 200  -  total flux cleaned = 0.00071494 Jy
! Total flux subtracted in 200 components = 0.00071494 Jy
! Clean residual min=-0.009900 max=0.010145 Jy/beam
! Clean residual mean=-0.000011 rms=0.002730 Jy/beam
! Combined flux in latest and established models = 3.45806 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 76 components and 3.45806 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.09 mas, bmaj=2.64 mas, bpa=19.33 degrees
! Estimated noise=0.94885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000577017 Jy
! Component: 100  -  total flux cleaned = 0.000758723 Jy
! Component: 150  -  total flux cleaned = 0.00134165 Jy
! Component: 200  -  total flux cleaned = 0.00185882 Jy
! Total flux subtracted in 200 components = 0.00185882 Jy
! Clean residual min=-0.010139 max=0.008577 Jy/beam
! Clean residual mean=-0.000008 rms=0.002031 Jy/beam
! Combined flux in latest and established models = 3.45992 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 3.45992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081607Jy  sigma=0.729051
! Fit after  self-cal, rms=0.081620Jy  sigma=0.728452
wmodel /J1743-0350_X_map.mod
! wmodel: Unable to open new model file: /J1743-0350_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1743-0350_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.09 x 2.64 at 19.33 degrees (North through East)
! Clean map  min=-0.0095128  max=3.1292 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1743-0350_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 3.12923 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00202359 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.194002 0.194002 0.388004 0.776008 1.55202 3.10403 6.20807 12.4161 24.8323 49.6645 99.3291
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       3.129 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1546.38 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1743-0350_X_dfm.log closed on Thu May 19 18:48:42 2016