! Started logfile: /scr/pima/bg219e_uvs/J1740+0311_X_uvs.log on Thu Apr  7 09:13:56 2016
obs /scr/pima/bg219e_uvs/J1740+0311_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1740+0311_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.833868 visibilities/baseline/integration-bin.
! Found source: J1740+0311
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18732 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1740+0311_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.005824Jy  sigma=24.703204
! Fit after  self-cal, rms=0.930436Jy  sigma=22.788057
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.989 mas, bmaj=2.507 mas, bpa=20.87 degrees
! Estimated noise=0.476227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0523475 Jy
! Component: 100  -  total flux cleaned = 0.0713896 Jy
! Total flux subtracted in 100 components = 0.0713896 Jy
! Clean residual min=-0.007530 max=0.021086 Jy/beam
! Clean residual mean=-0.000010 rms=0.002464 Jy/beam
! Combined flux in latest and established models = 0.0713896 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0713896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075203Jy  sigma=1.802390
! Fit after  self-cal, rms=0.073691Jy  sigma=1.767159
! Inverting map 
! Added new window around map position (-3.4, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202977 Jy
! Component: 100  -  total flux cleaned = 0.0321665 Jy
! Total flux subtracted in 100 components = 0.0321665 Jy
! Clean residual min=-0.006544 max=0.008742 Jy/beam
! Clean residual mean=-0.000006 rms=0.001703 Jy/beam
! Combined flux in latest and established models = 0.103556 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.103556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066200Jy  sigma=1.569479
! Fit after  self-cal, rms=0.064738Jy  sigma=1.533178
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125669 Jy
! Component: 100  -  total flux cleaned = 0.020345 Jy
! Total flux subtracted in 100 components = 0.020345 Jy
! Clean residual min=-0.004437 max=0.005877 Jy/beam
! Clean residual mean=-0.000004 rms=0.001244 Jy/beam
! Combined flux in latest and established models = 0.123901 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.123901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061391Jy  sigma=1.443824
! Fit after  self-cal, rms=0.060957Jy  sigma=1.432400
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.175 mas, bmaj=2.602 mas, bpa=17.69 degrees
! Estimated noise=0.295495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107612 Jy
! Component: 100  -  total flux cleaned = 0.0174193 Jy
! Component: 150  -  total flux cleaned = 0.0220417 Jy
! Component: 200  -  total flux cleaned = 0.0253792 Jy
! Total flux subtracted in 200 components = 0.0253792 Jy
! Clean residual min=-0.003186 max=0.005122 Jy/beam
! Clean residual mean=-0.000004 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.14928 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 56 components and 0.14928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058828Jy  sigma=1.375491
! Fit after  self-cal, rms=0.058554Jy  sigma=1.368442
! Inverting map 
! Added new window around map position (-5.2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533905 Jy
! Component: 100  -  total flux cleaned = 0.00827047 Jy
! Component: 150  -  total flux cleaned = 0.0100815 Jy
! Component: 200  -  total flux cleaned = 0.0108593 Jy
! Total flux subtracted in 200 components = 0.0108593 Jy
! Clean residual min=-0.002453 max=0.002440 Jy/beam
! Clean residual mean=-0.000001 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.16014 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.16014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058039Jy  sigma=1.355086
! Fit after  self-cal, rms=0.057955Jy  sigma=1.353060
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.175 x 2.602 at 17.69 degrees (North through East)
! Clean map  min=-0.0020477  max=0.070073 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.95     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.95     NL        1.03     OV        1.01     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00     KP        0.97     
!   LA        0.98     NL        1.04     OV        1.06     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.04     KP        0.98     
!   LA        0.95     NL        1.04     OV        1.01     PT        0.95     
!   SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.96     KP        0.98     
!   LA        0.99     NL        1.04     OV        1.03     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.99     KP        1.02     
!   LA        0.99     NL        1.07     OV        0.99     PT        0.98     
!   SC        0.89     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.98     KP        0.97     
!   LA        1.00     NL        1.04     OV        1.01     PT        1.02     
!   SC        0.96     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057955Jy  sigma=1.353060
! Fit after  self-cal, rms=0.056950Jy  sigma=1.350083
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=2.6 mas, bpa=17.81 degrees
! Estimated noise=0.292788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107487 Jy
! Component: 100  -  total flux cleaned = 0.000109026 Jy
! Component: 150  -  total flux cleaned = 0.000155527 Jy
! Component: 200  -  total flux cleaned = 6.92298e-05 Jy
! Total flux subtracted in 200 components = 6.92298e-05 Jy
! Clean residual min=-0.002204 max=0.002071 Jy/beam
! Clean residual mean=-0.000000 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.160209 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.160209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056845Jy  sigma=1.347600
! Fit after  self-cal, rms=0.056813Jy  sigma=1.346958
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056813Jy  sigma=1.346958
! Fit after  self-cal, rms=0.056662Jy  sigma=1.344579
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.166 mas, bmaj=2.594 mas, bpa=17.74 degrees
! Estimated noise=0.291393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.0528e-05 Jy
! Component: 100  -  total flux cleaned = 2.62869e-05 Jy
! Component: 150  -  total flux cleaned = 6.22334e-05 Jy
! Component: 200  -  total flux cleaned = 6.15798e-05 Jy
! Total flux subtracted in 200 components = 6.15798e-05 Jy
! Clean residual min=-0.001863 max=0.001878 Jy/beam
! Clean residual mean=-0.000000 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.160271 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.160271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056602Jy  sigma=1.343201
! Fit after  self-cal, rms=0.056596Jy  sigma=1.342689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.8, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000783487 Jy
! Component: 100  -  total flux cleaned = 0.000877159 Jy
! Component: 150  -  total flux cleaned = 0.00099862 Jy
! Component: 200  -  total flux cleaned = 0.00110522 Jy
! Total flux subtracted in 200 components = 0.00110522 Jy
! Clean residual min=-0.001707 max=0.001517 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.161376 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 93 components and 0.161376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056519Jy  sigma=1.340843
! Fit after  self-cal, rms=0.056512Jy  sigma=1.340627
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056512Jy  sigma=1.340627
! Fit after  self-cal, rms=0.056558Jy  sigma=1.340632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.596 mas, bpa=17.72 degrees
! Estimated noise=0.291284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382579 Jy
! Component: 100  -  total flux cleaned = 0.000417373 Jy
! Component: 150  -  total flux cleaned = 0.000449989 Jy
! Component: 200  -  total flux cleaned = 0.000478186 Jy
! Total flux subtracted in 200 components = 0.000478186 Jy
! Clean residual min=-0.001634 max=0.001439 Jy/beam
! Clean residual mean=-0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.161854 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 100 components and 0.161854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056520Jy  sigma=1.339767
! Fit after  self-cal, rms=0.056520Jy  sigma=1.339702
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.09361e-06 Jy
! Component: 100  -  total flux cleaned = 3.21405e-05 Jy
! Component: 150  -  total flux cleaned = 3.14796e-05 Jy
! Component: 200  -  total flux cleaned = 8.07343e-05 Jy
! Total flux subtracted in 200 components = 8.07343e-05 Jy
! Clean residual min=-0.001622 max=0.001458 Jy/beam
! Clean residual mean=-0.000000 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.161935 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.161935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056495Jy  sigma=1.339166
! Fit after  self-cal, rms=0.056493Jy  sigma=1.339136
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056493Jy  sigma=1.339136
! Fit after  self-cal, rms=0.056579Jy  sigma=1.339111
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.229 mas, bmaj=3.274 mas, bpa=3.048 degrees
! Estimated noise=0.338161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.11631e-05 Jy
! Component: 100  -  total flux cleaned = 1.83758e-05 Jy
! Component: 150  -  total flux cleaned = -5.07196e-05 Jy
! Component: 200  -  total flux cleaned = -0.000113463 Jy
! Total flux subtracted in 200 components = -0.000113463 Jy
! Clean residual min=-0.001450 max=0.001351 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.161821 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 126 components and 0.161821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056570Jy  sigma=1.338871
! Fit after  self-cal, rms=0.056569Jy  sigma=1.338838
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.99631e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109709 Jy
! Component: 150  -  total flux cleaned = -0.000152082 Jy
! Component: 200  -  total flux cleaned = -0.000178767 Jy
! Total flux subtracted in 200 components = -0.000178767 Jy
! Clean residual min=-0.001399 max=0.001318 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.161642 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 135 components and 0.161642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056563Jy  sigma=1.338696
! Fit after  self-cal, rms=0.056562Jy  sigma=1.338686
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.597 mas, bpa=17.73 degrees
! Estimated noise=0.291523 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.167 x 2.597 at 17.73 degrees (North through East)
! Clean map  min=-0.0015545  max=0.068488 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9813 mas, bmaj=2.494 mas, bpa=20.82 degrees
! Estimated noise=0.470205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532787 Jy
! Component: 100  -  total flux cleaned = 0.081063 Jy
! Component: 150  -  total flux cleaned = 0.100433 Jy
! Component: 200  -  total flux cleaned = 0.11432 Jy
! Total flux subtracted in 200 components = 0.11432 Jy
! Clean residual min=-0.004915 max=0.007883 Jy/beam
! Clean residual mean=-0.000007 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.11432 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.11432 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.597 mas, bpa=17.73 degrees
! Estimated noise=0.291523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141496 Jy
! Component: 100  -  total flux cleaned = 0.0237846 Jy
! Component: 150  -  total flux cleaned = 0.030609 Jy
! Component: 200  -  total flux cleaned = 0.0354981 Jy
! Total flux subtracted in 200 components = 0.0354981 Jy
! Clean residual min=-0.002505 max=0.002818 Jy/beam
! Clean residual mean=-0.000003 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.149818 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 51 components and 0.149818 Jy
! Inverting map 
! Added new window around map position (5.8, -11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360671 Jy
! Component: 100  -  total flux cleaned = 0.00632815 Jy
! Component: 150  -  total flux cleaned = 0.0084063 Jy
! Component: 200  -  total flux cleaned = 0.0092701 Jy
! Total flux subtracted in 200 components = 0.0092701 Jy
! Clean residual min=-0.001879 max=0.001561 Jy/beam
! Clean residual mean=-0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.159089 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.159089 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.229 mas, bmaj=3.274 mas, bpa=3.048 degrees
! Estimated noise=0.338161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118301 Jy
! Component: 100  -  total flux cleaned = 0.00178223 Jy
! Component: 150  -  total flux cleaned = 0.00190178 Jy
! Component: 200  -  total flux cleaned = 0.00190201 Jy
! Total flux subtracted in 200 components = 0.00190201 Jy
! Clean residual min=-0.001633 max=0.001465 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.160991 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.30571e-06 Jy
! Component: 100  -  total flux cleaned = -1.03796e-06 Jy
! Component: 150  -  total flux cleaned = 4.8438e-05 Jy
! Component: 200  -  total flux cleaned = 7.1005e-05 Jy
! Total flux subtracted in 200 components = 7.1005e-05 Jy
! Clean residual min=-0.001481 max=0.001374 Jy/beam
! Clean residual mean=-0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.161062 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 114 components and 0.161062 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.597 mas, bpa=17.73 degrees
! Estimated noise=0.291523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000430214 Jy
! Component: 100  -  total flux cleaned = -0.000428124 Jy
! Component: 150  -  total flux cleaned = -0.000428794 Jy
! Component: 200  -  total flux cleaned = -0.000429743 Jy
! Total flux subtracted in 200 components = -0.000429743 Jy
! Clean residual min=-0.001545 max=0.001425 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.160632 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 137 components and 0.160632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056547Jy  sigma=1.338492
! Fit after  self-cal, rms=0.056532Jy  sigma=1.338166
wmodel /scr/pima/bg219e_uvs/J1740+0311_X_map.mod
! Writing 137 model components to file: /scr/pima/bg219e_uvs/J1740+0311_X_map.mod
wobs /scr/pima/bg219e_uvs/J1740+0311_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1740+0311_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1740+0311_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219e_uvs/J1740+0311_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000534324 Jy
! Component: 100  -  total flux cleaned = -0.000869758 Jy
! Component: 150  -  total flux cleaned = -0.00120537 Jy
! Component: 200  -  total flux cleaned = -0.00156657 Jy
! Component: 250  -  total flux cleaned = -0.00183143 Jy
! Component: 300  -  total flux cleaned = -0.0020866 Jy
! Component: 350  -  total flux cleaned = -0.00231447 Jy
! Component: 400  -  total flux cleaned = -0.00253552 Jy
! Component: 450  -  total flux cleaned = -0.00271477 Jy
! Component: 500  -  total flux cleaned = -0.00295839 Jy
! Component: 550  -  total flux cleaned = -0.00309367 Jy
! Component: 600  -  total flux cleaned = -0.00320967 Jy
! Component: 650  -  total flux cleaned = -0.00337191 Jy
! Component: 700  -  total flux cleaned = -0.00340327 Jy
! Component: 750  -  total flux cleaned = -0.00340348 Jy
! Component: 800  -  total flux cleaned = -0.00344939 Jy
! Component: 850  -  total flux cleaned = -0.00353916 Jy
! Component: 900  -  total flux cleaned = -0.00356821 Jy
! Component: 950  -  total flux cleaned = -0.00362612 Jy
! Component: 1000  -  total flux cleaned = -0.00366865 Jy
! Component: 1050  -  total flux cleaned = -0.00371061 Jy
! Component: 1100  -  total flux cleaned = -0.00375198 Jy
! Component: 1150  -  total flux cleaned = -0.00376579 Jy
! Component: 1200  -  total flux cleaned = -0.00384568 Jy
! Component: 1250  -  total flux cleaned = -0.00387179 Jy
! Component: 1300  -  total flux cleaned = -0.00387154 Jy
! Component: 1350  -  total flux cleaned = -0.00389706 Jy
! Component: 1400  -  total flux cleaned = -0.00395986 Jy
! Component: 1450  -  total flux cleaned = -0.00399716 Jy
! Component: 1500  -  total flux cleaned = -0.00405873 Jy
! Component: 1550  -  total flux cleaned = -0.00415563 Jy
! Component: 1600  -  total flux cleaned = -0.00422753 Jy
! Component: 1650  -  total flux cleaned = -0.0043336 Jy
! Component: 1700  -  total flux cleaned = -0.00438009 Jy
! Component: 1750  -  total flux cleaned = -0.0044033 Jy
! Component: 1800  -  total flux cleaned = -0.00447152 Jy
! Component: 1850  -  total flux cleaned = -0.00453888 Jy
! Component: 1900  -  total flux cleaned = -0.00457227 Jy
! Component: 1950  -  total flux cleaned = -0.00462707 Jy
! Component: 2000  -  total flux cleaned = -0.00464878 Jy
! Component: 2050  -  total flux cleaned = -0.0046597 Jy
! Component: 2100  -  total flux cleaned = -0.0047553 Jy
! Component: 2150  -  total flux cleaned = -0.00476576 Jy
! Component: 2200  -  total flux cleaned = -0.00481789 Jy
! Component: 2250  -  total flux cleaned = -0.00482814 Jy
! Component: 2300  -  total flux cleaned = -0.00488923 Jy
! Component: 2350  -  total flux cleaned = -0.00489911 Jy
! Component: 2400  -  total flux cleaned = -0.00487926 Jy
! Component: 2450  -  total flux cleaned = -0.00487934 Jy
! Component: 2500  -  total flux cleaned = -0.00489888 Jy
! Component: 2550  -  total flux cleaned = -0.00486965 Jy
! Component: 2600  -  total flux cleaned = -0.00489851 Jy
! Component: 2650  -  total flux cleaned = -0.00485084 Jy
! Component: 2700  -  total flux cleaned = -0.0048697 Jy
! Component: 2750  -  total flux cleaned = -0.00486021 Jy
! Component: 2800  -  total flux cleaned = -0.00483231 Jy
! Component: 2850  -  total flux cleaned = -0.00485986 Jy
! Component: 2900  -  total flux cleaned = -0.00482324 Jy
! Component: 2950  -  total flux cleaned = -0.0048141 Jy
! Component: 3000  -  total flux cleaned = -0.00478713 Jy
! Component: 3050  -  total flux cleaned = -0.00480495 Jy
! Component: 3100  -  total flux cleaned = -0.00479621 Jy
! Component: 3150  -  total flux cleaned = -0.00481379 Jy
! Component: 3200  -  total flux cleaned = -0.00478778 Jy
! Component: 3250  -  total flux cleaned = -0.00480504 Jy
! Component: 3300  -  total flux cleaned = -0.00482222 Jy
! Component: 3350  -  total flux cleaned = -0.00483072 Jy
! Component: 3400  -  total flux cleaned = -0.00481391 Jy
! Component: 3450  -  total flux cleaned = -0.0048475 Jy
! Component: 3500  -  total flux cleaned = -0.00484744 Jy
! Component: 3550  -  total flux cleaned = -0.00483087 Jy
! Component: 3600  -  total flux cleaned = -0.00486375 Jy
! Component: 3650  -  total flux cleaned = -0.00485568 Jy
! Component: 3700  -  total flux cleaned = -0.00487188 Jy
! Component: 3750  -  total flux cleaned = -0.00489608 Jy
! Component: 3800  -  total flux cleaned = -0.00488807 Jy
! Component: 3850  -  total flux cleaned = -0.00491176 Jy
! Component: 3900  -  total flux cleaned = -0.00492747 Jy
! Component: 3950  -  total flux cleaned = -0.00491182 Jy
! Component: 4000  -  total flux cleaned = -0.00491963 Jy
! Component: 4050  -  total flux cleaned = -0.00490427 Jy
! Total flux subtracted in 4096 components = -0.00489659 Jy
! Clean residual min=-0.000648 max=0.000429 Jy/beam
! Clean residual mean=-0.000001 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.155735 Jy
keep
! Adding 262 model components to the UV plane model.
! The established model now contains 399 components and 0.155735 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1740+0311_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.167 x 2.597 at 17.73 degrees (North through East)
! Clean map  min=-0.0013146  max=0.068081 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1740+0311_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0680811 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132131 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.582236 0.582236 1.16447 2.32894 4.65789 9.31578 18.6316 37.2631 74.5262
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.068 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  515.254 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1740+0311_X_uvs.log closed on Thu Apr  7 09:14:00 2016