! Started logfile: /scr/pima/bg219e_uvs/J1634-2058_S_dfm.log on Thu May 19 18:47:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1634-2058_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1634-2058_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.885582 visibilities/baseline/integration-bin.
! Found source: J1634-2058
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5356 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1634-2058_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042924Jy  sigma=18.694352
! Fit after  self-cal, rms=0.777304Jy  sigma=13.911991
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=11.29 mas, bpa=10.69 degrees
! Estimated noise=0.862325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169745 Jy
! Component: 100  -  total flux cleaned = 0.208599 Jy
! Total flux subtracted in 100 components = 0.208599 Jy
! Clean residual min=-0.006812 max=0.015162 Jy/beam
! Clean residual mean=-0.000020 rms=0.002020 Jy/beam
! Combined flux in latest and established models = 0.208599 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.208599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083984Jy  sigma=1.465367
! Fit after  self-cal, rms=0.083962Jy  sigma=1.465137
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173438 Jy
! Component: 100  -  total flux cleaned = 0.0269273 Jy
! Total flux subtracted in 100 components = 0.0269273 Jy
! Clean residual min=-0.004677 max=0.004726 Jy/beam
! Clean residual mean=-0.000008 rms=0.001210 Jy/beam
! Combined flux in latest and established models = 0.235526 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.235526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078889Jy  sigma=1.362336
! Fit after  self-cal, rms=0.078834Jy  sigma=1.361509
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.133 mas, bmaj=12.55 mas, bpa=9.391 degrees
! Estimated noise=0.564867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00905652 Jy
! Component: 100  -  total flux cleaned = 0.0132753 Jy
! Component: 150  -  total flux cleaned = 0.0153043 Jy
! Component: 200  -  total flux cleaned = 0.0161586 Jy
! Total flux subtracted in 200 components = 0.0161586 Jy
! Clean residual min=-0.003342 max=0.003046 Jy/beam
! Clean residual mean=-0.000001 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.251685 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 35 components and 0.251685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077949Jy  sigma=1.342139
! Fit after  self-cal, rms=0.077927Jy  sigma=1.341698
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.133 x 12.55 at 9.391 degrees (North through East)
! Clean map  min=-0.0033396  max=0.22608 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.04     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.97     PT        0.92     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        1.01     
!   LA        0.99     NL        1.01     OV        0.98     PT        1.01     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     NL        0.99     OV        1.03     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.96     KP        1.00     
!   LA        1.02     NL        0.97     OV        0.99     PT        1.04     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.077927Jy  sigma=1.341698
! Fit after  self-cal, rms=0.077223Jy  sigma=1.332851
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.14 mas, bmaj=12.59 mas, bpa=9.503 degrees
! Estimated noise=0.563085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000844457 Jy
! Component: 100  -  total flux cleaned = 0.000790094 Jy
! Component: 150  -  total flux cleaned = 0.000709159 Jy
! Component: 200  -  total flux cleaned = 0.000674893 Jy
! Total flux subtracted in 200 components = 0.000674893 Jy
! Clean residual min=-0.002746 max=0.002771 Jy/beam
! Clean residual mean=0.000004 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.252359 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 65 components and 0.25236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077165Jy  sigma=1.331950
! Fit after  self-cal, rms=0.077155Jy  sigma=1.331779
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077155Jy  sigma=1.331779
! Fit after  self-cal, rms=0.076848Jy  sigma=1.327613
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.139 mas, bmaj=12.58 mas, bpa=9.533 degrees
! Estimated noise=0.56318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00054585 Jy
! Component: 100  -  total flux cleaned = 0.000644164 Jy
! Component: 150  -  total flux cleaned = 0.000667928 Jy
! Component: 200  -  total flux cleaned = 0.000643881 Jy
! Total flux subtracted in 200 components = 0.000643881 Jy
! Clean residual min=-0.002542 max=0.002685 Jy/beam
! Clean residual mean=0.000003 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.253003 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 88 components and 0.253003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076822Jy  sigma=1.327192
! Fit after  self-cal, rms=0.076819Jy  sigma=1.327101
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025657 Jy
! Component: 100  -  total flux cleaned = 0.000257839 Jy
! Component: 150  -  total flux cleaned = 0.000258491 Jy
! Component: 200  -  total flux cleaned = 0.0002218 Jy
! Total flux subtracted in 200 components = 0.0002218 Jy
! Clean residual min=-0.002490 max=0.002695 Jy/beam
! Clean residual mean=0.000003 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.253225 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 105 components and 0.253225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076807Jy  sigma=1.326891
! Fit after  self-cal, rms=0.076805Jy  sigma=1.326867
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076805Jy  sigma=1.326867
! Fit after  self-cal, rms=0.076685Jy  sigma=1.326083
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.139 mas, bmaj=12.57 mas, bpa=9.541 degrees
! Estimated noise=0.562975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228153 Jy
! Component: 100  -  total flux cleaned = 0.000274478 Jy
! Component: 150  -  total flux cleaned = 0.00031809 Jy
! Component: 200  -  total flux cleaned = 0.000357697 Jy
! Total flux subtracted in 200 components = 0.000357697 Jy
! Clean residual min=-0.002408 max=0.002623 Jy/beam
! Clean residual mean=0.000002 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.253583 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.253583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076672Jy  sigma=1.325859
! Fit after  self-cal, rms=0.076673Jy  sigma=1.325835
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120696 Jy
! Component: 100  -  total flux cleaned = 0.000120418 Jy
! Component: 150  -  total flux cleaned = 0.000103443 Jy
! Component: 200  -  total flux cleaned = 8.71753e-05 Jy
! Total flux subtracted in 200 components = 8.71753e-05 Jy
! Clean residual min=-0.002421 max=0.002614 Jy/beam
! Clean residual mean=0.000002 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.25367 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 0.25367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076665Jy  sigma=1.325698
! Fit after  self-cal, rms=0.076665Jy  sigma=1.325691
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076665Jy  sigma=1.325691
! Fit after  self-cal, rms=0.076676Jy  sigma=1.325655
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.371 mas, bmaj=17.43 mas, bpa=-0.8006 degrees
! Estimated noise=0.646719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142243 Jy
! Component: 100  -  total flux cleaned = 0.000298505 Jy
! Component: 150  -  total flux cleaned = 0.00042364 Jy
! Component: 200  -  total flux cleaned = 0.000513332 Jy
! Total flux subtracted in 200 components = 0.000513332 Jy
! Clean residual min=-0.002558 max=0.002555 Jy/beam
! Clean residual mean=0.000004 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.254183 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 137 components and 0.254183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076672Jy  sigma=1.325585
! Fit after  self-cal, rms=0.076671Jy  sigma=1.325562
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.12226e-05 Jy
! Component: 100  -  total flux cleaned = 0.000153093 Jy
! Component: 150  -  total flux cleaned = 0.000152506 Jy
! Component: 200  -  total flux cleaned = 0.000153299 Jy
! Total flux subtracted in 200 components = 0.000153299 Jy
! Clean residual min=-0.002546 max=0.002524 Jy/beam
! Clean residual mean=0.000004 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.254337 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 149 components and 0.254337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076670Jy  sigma=1.325555
! Fit after  self-cal, rms=0.076669Jy  sigma=1.325541
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.141 mas, bmaj=12.57 mas, bpa=9.547 degrees
! Estimated noise=0.562953 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.141 x 12.57 at 9.547 degrees (North through East)
! Clean map  min=-0.0023851  max=0.22408 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.211 mas, bmaj=11.28 mas, bpa=10.77 degrees
! Estimated noise=0.861203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169403 Jy
! Component: 100  -  total flux cleaned = 0.208146 Jy
! Component: 150  -  total flux cleaned = 0.225081 Jy
! Component: 200  -  total flux cleaned = 0.234564 Jy
! Total flux subtracted in 200 components = 0.234564 Jy
! Clean residual min=-0.004688 max=0.004858 Jy/beam
! Clean residual mean=-0.000005 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.234564 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.234564 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.141 mas, bmaj=12.57 mas, bpa=9.547 degrees
! Estimated noise=0.562953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00921485 Jy
! Component: 100  -  total flux cleaned = 0.0139517 Jy
! Component: 150  -  total flux cleaned = 0.0167155 Jy
! Component: 200  -  total flux cleaned = 0.0180631 Jy
! Total flux subtracted in 200 components = 0.0180631 Jy
! Clean residual min=-0.002748 max=0.002643 Jy/beam
! Clean residual mean=0.000001 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.252627 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 37 components and 0.252627 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.371 mas, bmaj=17.43 mas, bpa=-0.8006 degrees
! Estimated noise=0.646719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113276 Jy
! Component: 100  -  total flux cleaned = 0.00154057 Jy
! Component: 150  -  total flux cleaned = 0.00163821 Jy
! Component: 200  -  total flux cleaned = 0.00171713 Jy
! Total flux subtracted in 200 components = 0.00171713 Jy
! Clean residual min=-0.002668 max=0.002586 Jy/beam
! Clean residual mean=0.000003 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.254344 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.12189e-05 Jy
! Component: 100  -  total flux cleaned = 4.15045e-05 Jy
! Component: 150  -  total flux cleaned = 6.05831e-05 Jy
! Component: 200  -  total flux cleaned = 7.78484e-05 Jy
! Total flux subtracted in 200 components = 7.78484e-05 Jy
! Clean residual min=-0.002621 max=0.002609 Jy/beam
! Clean residual mean=0.000004 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.254422 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 78 components and 0.254422 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.141 mas, bmaj=12.57 mas, bpa=9.547 degrees
! Estimated noise=0.562953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.44554e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109237 Jy
! Component: 150  -  total flux cleaned = -0.000110575 Jy
! Component: 200  -  total flux cleaned = -0.000111342 Jy
! Total flux subtracted in 200 components = -0.000111342 Jy
! Clean residual min=-0.002380 max=0.002603 Jy/beam
! Clean residual mean=0.000002 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.25431 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.25431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076699Jy  sigma=1.325873
! Fit after  self-cal, rms=0.076697Jy  sigma=1.325845
wmodel /J1634-2058_S_map.mod
! wmodel: Unable to open new model file: /J1634-2058_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1634-2058_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.141 x 12.57 at 9.547 degrees (North through East)
! Clean map  min=-0.0022876  max=0.2243 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1634-2058_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.224302 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000630985 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.843934 0.843934 1.68787 3.37573 6.75147 13.5029 27.0059 54.0118
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.224 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  355.478 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1634-2058_S_dfm.log closed on Thu May 19 18:47:52 2016