! Started logfile: /scr/pima/bg219e_uvs/J1633-2557_S_uvs.log on Thu Apr  7 06:48:51 2016
obs /scr/pima/bg219e_uvs/J1633-2557_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1633-2557_S_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.88141 visibilities/baseline/integration-bin.
! Found source: J1633-2557
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6600 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1633-2557_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012434Jy  sigma=17.538380
! Fit after  self-cal, rms=0.869331Jy  sigma=15.057753
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=12.2 mas, bpa=10.04 degrees
! Estimated noise=0.795231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10288 Jy
! Component: 100  -  total flux cleaned = 0.125349 Jy
! Total flux subtracted in 100 components = 0.125349 Jy
! Clean residual min=-0.005421 max=0.006802 Jy/beam
! Clean residual mean=0.000009 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.125349 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.125349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083013Jy  sigma=1.381149
! Fit after  self-cal, rms=0.083010Jy  sigma=1.380992
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.985 mas, bmaj=13.6 mas, bpa=8.442 degrees
! Estimated noise=0.545965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00896376 Jy
! Component: 100  -  total flux cleaned = 0.0134955 Jy
! Component: 150  -  total flux cleaned = 0.0160883 Jy
! Component: 200  -  total flux cleaned = 0.017676 Jy
! Total flux subtracted in 200 components = 0.017676 Jy
! Clean residual min=-0.003431 max=0.004810 Jy/beam
! Clean residual mean=0.000011 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.143025 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 30 components and 0.143025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082034Jy  sigma=1.366730
! Fit after  self-cal, rms=0.082043Jy  sigma=1.366492
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.985 x 13.6 at 8.442 degrees (North through East)
! Clean map  min=-0.0034564  max=0.13083 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        1.02     KP        0.96     
!   LA        0.97     NL        0.98     OV        0.98     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        1.05     KP        0.97     
!   LA        0.98     NL        0.96     OV        1.00     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.01     KP        1.01     
!   LA        1.06     NL        1.03     OV        0.96     PT        0.98     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.082043Jy  sigma=1.366492
! Fit after  self-cal, rms=0.080757Jy  sigma=1.362101
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.996 mas, bmaj=13.67 mas, bpa=8.546 degrees
! Estimated noise=0.536305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00191182 Jy
! Component: 100  -  total flux cleaned = -0.00279307 Jy
! Component: 150  -  total flux cleaned = -0.00288579 Jy
! Component: 200  -  total flux cleaned = -0.00288611 Jy
! Total flux subtracted in 200 components = -0.00288611 Jy
! Clean residual min=-0.003322 max=0.004275 Jy/beam
! Clean residual mean=0.000010 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.140138 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 0.140138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080741Jy  sigma=1.360573
! Fit after  self-cal, rms=0.080759Jy  sigma=1.360509
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080759Jy  sigma=1.360509
! Fit after  self-cal, rms=0.080182Jy  sigma=1.373651
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.004 mas, bmaj=13.77 mas, bpa=8.768 degrees
! Estimated noise=0.526463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00265907 Jy
! Component: 100  -  total flux cleaned = -0.00363564 Jy
! Component: 150  -  total flux cleaned = -0.00363632 Jy
! Component: 200  -  total flux cleaned = -0.00361307 Jy
! Total flux subtracted in 200 components = -0.00361307 Jy
! Clean residual min=-0.003496 max=0.004729 Jy/beam
! Clean residual mean=0.000011 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.136525 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.136525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080154Jy  sigma=1.370591
! Fit after  self-cal, rms=0.080188Jy  sigma=1.370486
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-76.5, -115.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325409 Jy
! Component: 100  -  total flux cleaned = 0.00365781 Jy
! Component: 150  -  total flux cleaned = 0.00372722 Jy
! Component: 200  -  total flux cleaned = 0.00352145 Jy
! Total flux subtracted in 200 components = 0.00352145 Jy
! Clean residual min=-0.002959 max=0.003673 Jy/beam
! Clean residual mean=0.000012 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.140047 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 92 components and 0.140047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080036Jy  sigma=1.362650
! Fit after  self-cal, rms=0.080002Jy  sigma=1.361993
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080002Jy  sigma=1.361993
! Fit after  self-cal, rms=0.078812Jy  sigma=1.360296
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.005 mas, bmaj=13.82 mas, bpa=8.842 degrees
! Estimated noise=0.518277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000707535 Jy
! Component: 100  -  total flux cleaned = -0.00100375 Jy
! Component: 150  -  total flux cleaned = -0.00129703 Jy
! Component: 200  -  total flux cleaned = -0.00144038 Jy
! Total flux subtracted in 200 components = -0.00144038 Jy
! Clean residual min=-0.002950 max=0.003470 Jy/beam
! Clean residual mean=0.000014 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.138606 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 106 components and 0.138606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078765Jy  sigma=1.355994
! Fit after  self-cal, rms=0.078759Jy  sigma=1.355837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.88363e-05 Jy
! Component: 100  -  total flux cleaned = -6.97543e-05 Jy
! Component: 150  -  total flux cleaned = -0.000212054 Jy
! Component: 200  -  total flux cleaned = -0.000371801 Jy
! Total flux subtracted in 200 components = -0.000371801 Jy
! Clean residual min=-0.002906 max=0.003411 Jy/beam
! Clean residual mean=0.000014 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.138235 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 117 components and 0.138235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078750Jy  sigma=1.354402
! Fit after  self-cal, rms=0.078745Jy  sigma=1.354363
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078745Jy  sigma=1.354363
! Fit after  self-cal, rms=0.077834Jy  sigma=1.353704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.256 mas, bmaj=19.67 mas, bpa=-0.1741 degrees
! Estimated noise=0.586409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00139525 Jy
! Component: 100  -  total flux cleaned = -0.00163235 Jy
! Component: 150  -  total flux cleaned = -0.00166968 Jy
! Component: 200  -  total flux cleaned = -0.00163911 Jy
! Total flux subtracted in 200 components = -0.00163911 Jy
! Clean residual min=-0.003397 max=0.003301 Jy/beam
! Clean residual mean=0.000024 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.136596 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.136596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077830Jy  sigma=1.351881
! Fit after  self-cal, rms=0.077831Jy  sigma=1.351806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148043 Jy
! Component: 100  -  total flux cleaned = -8.86437e-05 Jy
! Component: 150  -  total flux cleaned = -3.52028e-05 Jy
! Component: 200  -  total flux cleaned = 1.49611e-05 Jy
! Total flux subtracted in 200 components = 1.49611e-05 Jy
! Clean residual min=-0.003375 max=0.003241 Jy/beam
! Clean residual mean=0.000024 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.136611 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 145 components and 0.136611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077834Jy  sigma=1.351457
! Fit after  self-cal, rms=0.077833Jy  sigma=1.351429
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=13.86 mas, bpa=8.874 degrees
! Estimated noise=0.511885 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.009 x 13.86 at 8.874 degrees (North through East)
! Clean map  min=-0.00363  max=0.12233 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=12.45 mas, bpa=10.44 degrees
! Estimated noise=0.751176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.096996 Jy
! Component: 100  -  total flux cleaned = 0.118381 Jy
! Component: 150  -  total flux cleaned = 0.125884 Jy
! Component: 200  -  total flux cleaned = 0.129858 Jy
! Total flux subtracted in 200 components = 0.129858 Jy
! Clean residual min=-0.004265 max=0.004843 Jy/beam
! Clean residual mean=0.000010 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 0.129858 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.129858 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=13.86 mas, bpa=8.874 degrees
! Estimated noise=0.511885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (56, -88.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390408 Jy
! Component: 100  -  total flux cleaned = 0.00530422 Jy
! Component: 150  -  total flux cleaned = 0.00618266 Jy
! Component: 200  -  total flux cleaned = 0.00697559 Jy
! Total flux subtracted in 200 components = 0.00697559 Jy
! Clean residual min=-0.003511 max=0.003701 Jy/beam
! Clean residual mean=0.000018 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.136834 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 48 components and 0.136834 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.256 mas, bmaj=19.67 mas, bpa=-0.1741 degrees
! Estimated noise=0.586409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116065 Jy
! Component: 100  -  total flux cleaned = 0.00150771 Jy
! Component: 150  -  total flux cleaned = 0.00144936 Jy
! Component: 200  -  total flux cleaned = 0.00139926 Jy
! Total flux subtracted in 200 components = 0.00139926 Jy
! Clean residual min=-0.003187 max=0.003237 Jy/beam
! Clean residual mean=0.000032 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.138233 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.51647e-07 Jy
! Component: 100  -  total flux cleaned = -3.32459e-07 Jy
! Component: 150  -  total flux cleaned = -3.71671e-05 Jy
! Component: 200  -  total flux cleaned = -3.54654e-05 Jy
! Total flux subtracted in 200 components = -3.54654e-05 Jy
! Clean residual min=-0.003253 max=0.003023 Jy/beam
! Clean residual mean=0.000032 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.138197 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 82 components and 0.138197 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=13.86 mas, bpa=8.874 degrees
! Estimated noise=0.511885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000570179 Jy
! Component: 100  -  total flux cleaned = -0.000567804 Jy
! Component: 150  -  total flux cleaned = -0.000567287 Jy
! Component: 200  -  total flux cleaned = -0.000567787 Jy
! Total flux subtracted in 200 components = -0.000567787 Jy
! Clean residual min=-0.002915 max=0.003186 Jy/beam
! Clean residual mean=0.000018 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.137629 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.13763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077807Jy  sigma=1.348956
! Fit after  self-cal, rms=0.077788Jy  sigma=1.348517
wmodel /scr/pima/bg219e_uvs/J1633-2557_S_map.mod
! Writing 108 model components to file: /scr/pima/bg219e_uvs/J1633-2557_S_map.mod
wobs /scr/pima/bg219e_uvs/J1633-2557_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1633-2557_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J1633-2557_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J1633-2557_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000884079 Jy
! Component: 100  -  total flux cleaned = 0.000833149 Jy
! Component: 150  -  total flux cleaned = 0.00078293 Jy
! Component: 200  -  total flux cleaned = 0.000917628 Jy
! Component: 250  -  total flux cleaned = 0.00104903 Jy
! Component: 300  -  total flux cleaned = 0.00117607 Jy
! Component: 350  -  total flux cleaned = 0.00133847 Jy
! Component: 400  -  total flux cleaned = 0.00153358 Jy
! Component: 450  -  total flux cleaned = 0.00183419 Jy
! Component: 500  -  total flux cleaned = 0.00190751 Jy
! Component: 550  -  total flux cleaned = 0.0021567 Jy
! Component: 600  -  total flux cleaned = 0.00232977 Jy
! Component: 650  -  total flux cleaned = 0.00243069 Jy
! Component: 700  -  total flux cleaned = 0.00266096 Jy
! Component: 750  -  total flux cleaned = 0.00269304 Jy
! Component: 800  -  total flux cleaned = 0.00294627 Jy
! Component: 850  -  total flux cleaned = 0.00303911 Jy
! Component: 900  -  total flux cleaned = 0.00316054 Jy
! Component: 950  -  total flux cleaned = 0.00328009 Jy
! Component: 1000  -  total flux cleaned = 0.00339697 Jy
! Component: 1050  -  total flux cleaned = 0.00348349 Jy
! Component: 1100  -  total flux cleaned = 0.00359703 Jy
! Component: 1150  -  total flux cleaned = 0.00368056 Jy
! Component: 1200  -  total flux cleaned = 0.00376237 Jy
! Component: 1250  -  total flux cleaned = 0.00381634 Jy
! Component: 1300  -  total flux cleaned = 0.00381617 Jy
! Component: 1350  -  total flux cleaned = 0.00384336 Jy
! Component: 1400  -  total flux cleaned = 0.00394695 Jy
! Component: 1450  -  total flux cleaned = 0.00399817 Jy
! Component: 1500  -  total flux cleaned = 0.00407364 Jy
! Component: 1550  -  total flux cleaned = 0.00412307 Jy
! Component: 1600  -  total flux cleaned = 0.00422085 Jy
! Component: 1650  -  total flux cleaned = 0.00422056 Jy
! Component: 1700  -  total flux cleaned = 0.00431552 Jy
! Component: 1750  -  total flux cleaned = 0.00433902 Jy
! Component: 1800  -  total flux cleaned = 0.00438572 Jy
! Component: 1850  -  total flux cleaned = 0.00440904 Jy
! Component: 1900  -  total flux cleaned = 0.00445392 Jy
! Component: 1950  -  total flux cleaned = 0.00445364 Jy
! Component: 2000  -  total flux cleaned = 0.00449792 Jy
! Component: 2050  -  total flux cleaned = 0.00456296 Jy
! Component: 2100  -  total flux cleaned = 0.00456252 Jy
! Component: 2150  -  total flux cleaned = 0.00464733 Jy
! Component: 2200  -  total flux cleaned = 0.00464712 Jy
! Component: 2250  -  total flux cleaned = 0.00466812 Jy
! Component: 2300  -  total flux cleaned = 0.00466823 Jy
! Component: 2350  -  total flux cleaned = 0.0047495 Jy
! Component: 2400  -  total flux cleaned = 0.00474927 Jy
! Component: 2450  -  total flux cleaned = 0.00480883 Jy
! Component: 2500  -  total flux cleaned = 0.00484795 Jy
! Component: 2550  -  total flux cleaned = 0.00482855 Jy
! Component: 2600  -  total flux cleaned = 0.00490537 Jy
! Component: 2650  -  total flux cleaned = 0.00496255 Jy
! Component: 2700  -  total flux cleaned = 0.00496279 Jy
! Component: 2750  -  total flux cleaned = 0.00503721 Jy
! Component: 2800  -  total flux cleaned = 0.00509262 Jy
! Component: 2850  -  total flux cleaned = 0.00516562 Jy
! Component: 2900  -  total flux cleaned = 0.00520188 Jy
! Component: 2950  -  total flux cleaned = 0.00525545 Jy
! Component: 3000  -  total flux cleaned = 0.00527322 Jy
! Component: 3050  -  total flux cleaned = 0.00532603 Jy
! Component: 3100  -  total flux cleaned = 0.00539536 Jy
! Component: 3150  -  total flux cleaned = 0.0053438 Jy
! Component: 3200  -  total flux cleaned = 0.00539529 Jy
! Component: 3250  -  total flux cleaned = 0.00544603 Jy
! Component: 3300  -  total flux cleaned = 0.00542937 Jy
! Component: 3350  -  total flux cleaned = 0.00546261 Jy
! Component: 3400  -  total flux cleaned = 0.00551205 Jy
! Component: 3450  -  total flux cleaned = 0.00556121 Jy
! Component: 3500  -  total flux cleaned = 0.00552864 Jy
! Component: 3550  -  total flux cleaned = 0.00548023 Jy
! Component: 3600  -  total flux cleaned = 0.00544842 Jy
! Component: 3650  -  total flux cleaned = 0.005512 Jy
! Component: 3700  -  total flux cleaned = 0.00548056 Jy
! Component: 3750  -  total flux cleaned = 0.00549597 Jy
! Component: 3800  -  total flux cleaned = 0.00543399 Jy
! Component: 3850  -  total flux cleaned = 0.00540331 Jy
! Component: 3900  -  total flux cleaned = 0.00544922 Jy
! Component: 3950  -  total flux cleaned = 0.00543402 Jy
! Component: 4000  -  total flux cleaned = 0.00541901 Jy
! Component: 4050  -  total flux cleaned = 0.00543387 Jy
! Total flux subtracted in 4096 components = 0.00540399 Jy
! Clean residual min=-0.000821 max=0.000893 Jy/beam
! Clean residual mean=0.000004 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.143034 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 414 components and 0.143034 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1633-2557_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.009 x 13.86 at 8.874 degrees (North through East)
! Clean map  min=-0.0027973  max=0.12191 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1633-2557_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.121914 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000285573 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.702722 0.702722 1.40544 2.81089 5.62178 11.2436 22.4871 44.9742 89.9485
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.121 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  426.911 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1633-2557_S_uvs.log closed on Thu Apr  7 06:48:55 2016