! Started logfile: /scr/pima/bg219e_uvs/J1629-2026_S_uvs.log on Thu Apr 7 06:48:47 2016 obs /scr/pima/bg219e_uvs/J1629-2026_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1629-2026_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.906019 visibilities/baseline/integration-bin. ! Found source: J1629-2026 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7828 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1629-2026_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.018652Jy sigma=18.062318 ! Fit after self-cal, rms=0.876672Jy sigma=15.525482 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=11.09 mas, bpa=11.06 degrees ! Estimated noise=0.734647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889317 Jy ! Component: 100 - total flux cleaned = 0.119737 Jy ! Total flux subtracted in 100 components = 0.119737 Jy ! Clean residual min=-0.006226 max=0.015039 Jy/beam ! Clean residual mean=-0.000009 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 0.119737 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.119737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090095Jy sigma=1.503340 ! Fit after self-cal, rms=0.089981Jy sigma=1.501568 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184383 Jy ! Component: 100 - total flux cleaned = 0.0301112 Jy ! Total flux subtracted in 100 components = 0.0301112 Jy ! Clean residual min=-0.004811 max=0.006419 Jy/beam ! Clean residual mean=-0.000001 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.149848 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.149848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084297Jy sigma=1.391469 ! Fit after self-cal, rms=0.084253Jy sigma=1.390637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=12.56 mas, bpa=9.923 degrees ! Estimated noise=0.476653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122505 Jy ! Component: 100 - total flux cleaned = 0.0192774 Jy ! Component: 150 - total flux cleaned = 0.0242137 Jy ! Component: 200 - total flux cleaned = 0.0278606 Jy ! Total flux subtracted in 200 components = 0.0278606 Jy ! Clean residual min=-0.003971 max=0.003656 Jy/beam ! Clean residual mean=0.000015 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.177709 Jy ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 113 components and 0.177709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082251Jy sigma=1.354823 ! Fit after self-cal, rms=0.082186Jy sigma=1.353559 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.798 x 12.56 at 9.923 degrees (North through East) ! Clean map min=-0.0038755 max=0.1251 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.03 KP 0.99 ! LA 0.86 NL 1.01 OV 1.04 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.99 KP 1.01 ! LA 0.92 NL 1.03 OV 1.00 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.99 KP 0.97 ! LA 0.98 NL 1.00 OV 0.98 PT 1.04 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.01 KP 1.00 ! LA 0.97 NL 1.05 OV 0.99 PT 1.07 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.082186Jy sigma=1.353559 ! Fit after self-cal, rms=0.079987Jy sigma=1.340407 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=12.64 mas, bpa=9.839 degrees ! Estimated noise=0.473437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179059 Jy ! Component: 100 - total flux cleaned = 0.00234951 Jy ! Component: 150 - total flux cleaned = 0.00281715 Jy ! Component: 200 - total flux cleaned = 0.00297855 Jy ! Total flux subtracted in 200 components = 0.00297855 Jy ! Clean residual min=-0.002948 max=0.003014 Jy/beam ! Clean residual mean=0.000018 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.180687 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 145 components and 0.180687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079922Jy sigma=1.339424 ! Fit after self-cal, rms=0.079916Jy sigma=1.339099 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079916Jy sigma=1.339099 ! Fit after self-cal, rms=0.080278Jy sigma=1.338831 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=12.59 mas, bpa=9.872 degrees ! Estimated noise=0.474782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017104 Jy ! Component: 100 - total flux cleaned = 0.00292522 Jy ! Component: 150 - total flux cleaned = 0.00384875 Jy ! Component: 200 - total flux cleaned = 0.00440642 Jy ! Total flux subtracted in 200 components = 0.00440642 Jy ! Clean residual min=-0.003434 max=0.002404 Jy/beam ! Clean residual mean=0.000015 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.185094 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 169 components and 0.185094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080224Jy sigma=1.338034 ! Fit after self-cal, rms=0.080216Jy sigma=1.337854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772815 Jy ! Component: 100 - total flux cleaned = 0.0012127 Jy ! Component: 150 - total flux cleaned = 0.00134727 Jy ! Component: 200 - total flux cleaned = 0.00146473 Jy ! Total flux subtracted in 200 components = 0.00146473 Jy ! Clean residual min=-0.003455 max=0.002390 Jy/beam ! Clean residual mean=0.000015 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.186558 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 179 components and 0.186558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080203Jy sigma=1.337699 ! Fit after self-cal, rms=0.080203Jy sigma=1.337683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080203Jy sigma=1.337683 ! Fit after self-cal, rms=0.080239Jy sigma=1.336664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=12.57 mas, bpa=9.914 degrees ! Estimated noise=0.47586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105675 Jy ! Component: 100 - total flux cleaned = 0.00180449 Jy ! Component: 150 - total flux cleaned = 0.0023836 Jy ! Component: 200 - total flux cleaned = 0.00284097 Jy ! Total flux subtracted in 200 components = 0.00284097 Jy ! Clean residual min=-0.003225 max=0.002381 Jy/beam ! Clean residual mean=0.000012 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.189399 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 197 components and 0.189399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080218Jy sigma=1.336386 ! Fit after self-cal, rms=0.080216Jy sigma=1.336352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448225 Jy ! Component: 100 - total flux cleaned = 0.000594359 Jy ! Component: 150 - total flux cleaned = 0.000646306 Jy ! Component: 200 - total flux cleaned = 0.000683245 Jy ! Total flux subtracted in 200 components = 0.000683245 Jy ! Clean residual min=-0.003248 max=0.002362 Jy/beam ! Clean residual mean=0.000012 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.190083 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 204 components and 0.190083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080211Jy sigma=1.336283 ! Fit after self-cal, rms=0.080212Jy sigma=1.336278 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080212Jy sigma=1.336278 ! Fit after self-cal, rms=0.080315Jy sigma=1.336118 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.589 mas, bmaj=16.89 mas, bpa=-0.3955 degrees ! Estimated noise=0.570734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120098 Jy ! Component: 100 - total flux cleaned = 0.00193359 Jy ! Component: 150 - total flux cleaned = 0.00244117 Jy ! Component: 200 - total flux cleaned = 0.00275492 Jy ! Total flux subtracted in 200 components = 0.00275492 Jy ! Clean residual min=-0.003315 max=0.002233 Jy/beam ! Clean residual mean=0.000022 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.192838 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 256 components and 0.192838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080306Jy sigma=1.336043 ! Fit after self-cal, rms=0.080304Jy sigma=1.336006 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502467 Jy ! Component: 100 - total flux cleaned = 0.000583173 Jy ! Component: 150 - total flux cleaned = 0.000628971 Jy ! Component: 200 - total flux cleaned = 0.000659611 Jy ! Total flux subtracted in 200 components = 0.000659611 Jy ! Clean residual min=-0.003303 max=0.002287 Jy/beam ! Clean residual mean=0.000022 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.193497 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 268 components and 0.193497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080304Jy sigma=1.336032 ! Fit after self-cal, rms=0.080305Jy sigma=1.336021 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=12.55 mas, bpa=9.935 degrees ! Estimated noise=0.477 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 12.55 at 9.935 degrees (North through East) ! Clean map min=-0.0031966 max=0.12339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=11.11 mas, bpa=11.12 degrees ! Estimated noise=0.737526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0888839 Jy ! Component: 100 - total flux cleaned = 0.120546 Jy ! Component: 150 - total flux cleaned = 0.138972 Jy ! Component: 200 - total flux cleaned = 0.150856 Jy ! Total flux subtracted in 200 components = 0.150856 Jy ! Clean residual min=-0.004959 max=0.006377 Jy/beam ! Clean residual mean=-0.000006 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.150856 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.150856 Jy ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=12.55 mas, bpa=9.935 degrees ! Estimated noise=0.477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012394 Jy ! Component: 100 - total flux cleaned = 0.0199079 Jy ! Component: 150 - total flux cleaned = 0.025232 Jy ! Component: 200 - total flux cleaned = 0.0291882 Jy ! Total flux subtracted in 200 components = 0.0291882 Jy ! Clean residual min=-0.003167 max=0.003008 Jy/beam ! Clean residual mean=0.000005 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.180045 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 117 components and 0.180045 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.589 mas, bmaj=16.89 mas, bpa=-0.3955 degrees ! Estimated noise=0.570734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451233 Jy ! Component: 100 - total flux cleaned = 0.00737486 Jy ! Component: 150 - total flux cleaned = 0.0093047 Jy ! Component: 200 - total flux cleaned = 0.0106446 Jy ! Total flux subtracted in 200 components = 0.0106446 Jy ! Clean residual min=-0.003147 max=0.002289 Jy/beam ! Clean residual mean=0.000020 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.190689 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943376 Jy ! Component: 100 - total flux cleaned = 0.00161182 Jy ! Component: 150 - total flux cleaned = 0.00208752 Jy ! Component: 200 - total flux cleaned = 0.0023797 Jy ! Total flux subtracted in 200 components = 0.0023797 Jy ! Clean residual min=-0.003200 max=0.002335 Jy/beam ! Clean residual mean=0.000022 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.193069 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 206 components and 0.193069 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=12.55 mas, bpa=9.935 degrees ! Estimated noise=0.477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72653e-05 Jy ! Component: 100 - total flux cleaned = -0.000119811 Jy ! Component: 150 - total flux cleaned = -0.000147506 Jy ! Component: 200 - total flux cleaned = -0.000146276 Jy ! Total flux subtracted in 200 components = -0.000146276 Jy ! Clean residual min=-0.003231 max=0.002338 Jy/beam ! Clean residual mean=0.000012 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.192922 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 222 components and 0.192922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080319Jy sigma=1.336328 ! Fit after self-cal, rms=0.080318Jy sigma=1.336299 wmodel /scr/pima/bg219e_uvs/J1629-2026_S_map.mod ! Writing 222 model components to file: /scr/pima/bg219e_uvs/J1629-2026_S_map.mod wobs /scr/pima/bg219e_uvs/J1629-2026_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1629-2026_S_uvs.fits wwins /scr/pima/bg219e_uvs/J1629-2026_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J1629-2026_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130741 Jy ! Component: 100 - total flux cleaned = -0.0014762 Jy ! Component: 150 - total flux cleaned = -0.00159242 Jy ! Component: 200 - total flux cleaned = -0.00166596 Jy ! Component: 250 - total flux cleaned = -0.00177222 Jy ! Component: 300 - total flux cleaned = -0.0019095 Jy ! Component: 350 - total flux cleaned = -0.00210846 Jy ! Component: 400 - total flux cleaned = -0.00223763 Jy ! Component: 450 - total flux cleaned = -0.00230063 Jy ! Component: 500 - total flux cleaned = -0.00242316 Jy ! Component: 550 - total flux cleaned = -0.00245303 Jy ! Component: 600 - total flux cleaned = -0.00254223 Jy ! Component: 650 - total flux cleaned = -0.00260021 Jy ! Component: 700 - total flux cleaned = -0.00260062 Jy ! Component: 750 - total flux cleaned = -0.00262899 Jy ! Component: 800 - total flux cleaned = -0.00271123 Jy ! Component: 850 - total flux cleaned = -0.00276505 Jy ! Component: 900 - total flux cleaned = -0.00279169 Jy ! Component: 950 - total flux cleaned = -0.00276588 Jy ! Component: 1000 - total flux cleaned = -0.00286918 Jy ! Component: 1050 - total flux cleaned = -0.00284377 Jy ! Component: 1100 - total flux cleaned = -0.0028685 Jy ! Component: 1150 - total flux cleaned = -0.0029173 Jy ! Component: 1200 - total flux cleaned = -0.00291704 Jy ! Component: 1250 - total flux cleaned = -0.00291679 Jy ! Component: 1300 - total flux cleaned = -0.0029633 Jy ! Component: 1350 - total flux cleaned = -0.00298631 Jy ! Component: 1400 - total flux cleaned = -0.00310072 Jy ! Component: 1450 - total flux cleaned = -0.00314572 Jy ! Component: 1500 - total flux cleaned = -0.00321243 Jy ! Component: 1550 - total flux cleaned = -0.00323489 Jy ! Component: 1600 - total flux cleaned = -0.00340868 Jy ! Component: 1650 - total flux cleaned = -0.00342996 Jy ! Component: 1700 - total flux cleaned = -0.00355736 Jy ! Component: 1750 - total flux cleaned = -0.00359904 Jy ! Component: 1800 - total flux cleaned = -0.00359875 Jy ! Component: 1850 - total flux cleaned = -0.00361911 Jy ! Component: 1900 - total flux cleaned = -0.00365907 Jy ! Component: 1950 - total flux cleaned = -0.00355833 Jy ! Component: 2000 - total flux cleaned = -0.00355832 Jy ! Component: 2050 - total flux cleaned = -0.0035189 Jy ! Component: 2100 - total flux cleaned = -0.00348008 Jy ! Component: 2150 - total flux cleaned = -0.00344171 Jy ! Component: 2200 - total flux cleaned = -0.00340377 Jy ! Component: 2250 - total flux cleaned = -0.00347948 Jy ! Component: 2300 - total flux cleaned = -0.00342325 Jy ! Component: 2350 - total flux cleaned = -0.00336771 Jy ! Component: 2400 - total flux cleaned = -0.00333094 Jy ! Component: 2450 - total flux cleaned = -0.00331285 Jy ! Component: 2500 - total flux cleaned = -0.00331289 Jy ! Component: 2550 - total flux cleaned = -0.00331272 Jy ! Component: 2600 - total flux cleaned = -0.00325946 Jy ! Component: 2650 - total flux cleaned = -0.00320665 Jy ! Component: 2700 - total flux cleaned = -0.00315418 Jy ! Component: 2750 - total flux cleaned = -0.00313696 Jy ! Component: 2800 - total flux cleaned = -0.00306816 Jy ! Component: 2850 - total flux cleaned = -0.00303395 Jy ! Component: 2900 - total flux cleaned = -0.00289885 Jy ! Component: 2950 - total flux cleaned = -0.00288212 Jy ! Component: 3000 - total flux cleaned = -0.00281571 Jy ! Component: 3050 - total flux cleaned = -0.00273334 Jy ! Component: 3100 - total flux cleaned = -0.00270067 Jy ! Component: 3150 - total flux cleaned = -0.00258674 Jy ! Component: 3200 - total flux cleaned = -0.00250607 Jy ! Component: 3250 - total flux cleaned = -0.00242603 Jy ! Component: 3300 - total flux cleaned = -0.00229874 Jy ! Component: 3350 - total flux cleaned = -0.00223554 Jy ! Component: 3400 - total flux cleaned = -0.00209466 Jy ! Component: 3450 - total flux cleaned = -0.00204815 Jy ! Component: 3500 - total flux cleaned = -0.00198625 Jy ! Component: 3550 - total flux cleaned = -0.00194022 Jy ! Component: 3600 - total flux cleaned = -0.0017879 Jy ! Component: 3650 - total flux cleaned = -0.00172739 Jy ! Component: 3700 - total flux cleaned = -0.00169729 Jy ! Component: 3750 - total flux cleaned = -0.00162246 Jy ! Component: 3800 - total flux cleaned = -0.00151849 Jy ! Component: 3850 - total flux cleaned = -0.00147418 Jy ! Component: 3900 - total flux cleaned = -0.00141544 Jy ! Component: 3950 - total flux cleaned = -0.00129882 Jy ! Component: 4000 - total flux cleaned = -0.00124084 Jy ! Component: 4050 - total flux cleaned = -0.00113997 Jy ! Total flux subtracted in 4096 components = -0.0010684 Jy ! Clean residual min=-0.000947 max=0.000857 Jy/beam ! Clean residual mean=0.000006 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.191854 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 530 components and 0.191854 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1629-2026_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 12.55 at 9.935 degrees (North through East) ! Clean map min=-0.0021641 max=0.12369 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1629-2026_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123686 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271224 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.657852 0.657852 1.3157 2.63141 5.26282 10.5256 21.0513 42.1025 84.2051 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.123 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 456.029 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1629-2026_S_uvs.log closed on Thu Apr 7 06:48:51 2016