! Started logfile: /scr/pima/bg219e_uvs/J1625-2527_X_uvs.log on Thu Apr 7 09:13:13 2016 obs /scr/pima/bg219e_uvs/J1625-2527_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1625-2527_X_uva.fits ! AN table 1: 32 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.829861 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11472 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1625-2527_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.558502Jy sigma=21.913585 ! Fit after self-cal, rms=0.316355Jy sigma=4.185865 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.848 mas, bmaj=2.831 mas, bpa=15.81 degrees ! Estimated noise=0.879072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.864466 Jy ! Component: 100 - total flux cleaned = 1.0657 Jy ! Total flux subtracted in 100 components = 1.0657 Jy ! Clean residual min=-0.039573 max=0.091495 Jy/beam ! Clean residual mean=-0.000023 rms=0.011461 Jy/beam ! Combined flux in latest and established models = 1.0657 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.0657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.282063Jy sigma=3.687329 ! Fit after self-cal, rms=0.281805Jy sigma=3.682976 ! Inverting map ! Added new window around map position (-1.2, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100007 Jy ! Component: 100 - total flux cleaned = 0.16266 Jy ! Total flux subtracted in 100 components = 0.16266 Jy ! Clean residual min=-0.033140 max=0.051090 Jy/beam ! Clean residual mean=-0.000018 rms=0.008854 Jy/beam ! Combined flux in latest and established models = 1.22836 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 27 components and 1.22836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.214371Jy sigma=2.703686 ! Fit after self-cal, rms=0.213494Jy sigma=2.688662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=3.406 mas, bpa=13.37 degrees ! Estimated noise=0.631679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.079381 Jy ! Component: 100 - total flux cleaned = 0.126753 Jy ! Component: 150 - total flux cleaned = 0.15772 Jy ! Component: 200 - total flux cleaned = 0.178304 Jy ! Total flux subtracted in 200 components = 0.178304 Jy ! Clean residual min=-0.024978 max=0.038614 Jy/beam ! Clean residual mean=-0.000031 rms=0.006382 Jy/beam ! Combined flux in latest and established models = 1.40666 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 54 components and 1.40666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.178031Jy sigma=2.138803 ! Fit after self-cal, rms=0.177322Jy sigma=2.125973 ! Inverting map ! Added new window around map position (2.2, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01347 Jy ! Component: 100 - total flux cleaned = 0.0214953 Jy ! Component: 150 - total flux cleaned = 0.0259444 Jy ! Component: 200 - total flux cleaned = 0.0285359 Jy ! Total flux subtracted in 200 components = 0.0285359 Jy ! Clean residual min=-0.020120 max=0.027292 Jy/beam ! Clean residual mean=-0.000017 rms=0.005685 Jy/beam ! Combined flux in latest and established models = 1.4352 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 1.4352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.166956Jy sigma=2.006525 ! Fit after self-cal, rms=0.166520Jy sigma=1.998525 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.067 x 3.406 at 13.37 degrees (North through East) ! Clean map min=-0.029634 max=1.078 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.17 KP 0.98 ! LA 0.99 NL 1.01 OV 0.99 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.16 KP 0.99 ! LA 0.99 NL 0.99 OV 0.98 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.18 KP 0.98 ! LA 0.98 NL 0.99 OV 0.98 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.16 KP 0.99 ! LA 0.97 NL 1.01 OV 0.98 PT 1.01 ! SC 1.00 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.14 KP 0.98 ! LA 0.98 NL 0.98 OV 0.98 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.13 KP 0.98 ! LA 0.97 NL 1.00 OV 0.97 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.17 KP 0.98 ! LA 0.98 NL 0.98 OV 0.96 PT 1.00 ! SC 1.00 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.166520Jy sigma=1.998525 ! Fit after self-cal, rms=0.159218Jy sigma=1.794281 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.072 mas, bmaj=3.458 mas, bpa=13.75 degrees ! Estimated noise=0.635579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0133368 Jy ! Component: 100 - total flux cleaned = -0.017691 Jy ! Component: 150 - total flux cleaned = -0.0187519 Jy ! Component: 200 - total flux cleaned = -0.0197037 Jy ! Total flux subtracted in 200 components = -0.0197037 Jy ! Clean residual min=-0.015998 max=0.022117 Jy/beam ! Clean residual mean=-0.000007 rms=0.004669 Jy/beam ! Combined flux in latest and established models = 1.4155 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 1.4155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154550Jy sigma=1.730585 ! Fit after self-cal, rms=0.154483Jy sigma=1.728845 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154483Jy sigma=1.728845 ! Fit after self-cal, rms=0.150126Jy sigma=1.681868 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.069 mas, bmaj=3.429 mas, bpa=13.5 degrees ! Estimated noise=0.628563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177228 Jy ! Component: 100 - total flux cleaned = -0.00214531 Jy ! Component: 150 - total flux cleaned = -0.00283298 Jy ! Component: 200 - total flux cleaned = -0.00345156 Jy ! Total flux subtracted in 200 components = -0.00345156 Jy ! Clean residual min=-0.014062 max=0.021474 Jy/beam ! Clean residual mean=0.000015 rms=0.004381 Jy/beam ! Combined flux in latest and established models = 1.41204 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 1.41204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.147831Jy sigma=1.666921 ! Fit after self-cal, rms=0.147812Jy sigma=1.666406 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499216 Jy ! Component: 100 - total flux cleaned = 0.003059 Jy ! Component: 150 - total flux cleaned = 0.000832711 Jy ! Component: 200 - total flux cleaned = -0.00166422 Jy ! Total flux subtracted in 200 components = -0.00166422 Jy ! Clean residual min=-0.013549 max=0.017829 Jy/beam ! Clean residual mean=0.000014 rms=0.004048 Jy/beam ! Combined flux in latest and established models = 1.41038 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 154 components and 1.41038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.141198Jy sigma=1.596470 ! Fit after self-cal, rms=0.140991Jy sigma=1.592604 ! Inverting map ! Added new window around map position (17.8, 28.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00981989 Jy ! Component: 100 - total flux cleaned = 0.00755813 Jy ! Component: 150 - total flux cleaned = 0.00546408 Jy ! Component: 200 - total flux cleaned = 0.00315809 Jy ! Total flux subtracted in 200 components = 0.00315809 Jy ! Clean residual min=-0.013417 max=0.016943 Jy/beam ! Clean residual mean=0.000020 rms=0.003846 Jy/beam ! Combined flux in latest and established models = 1.41354 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 174 components and 1.41354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.136915Jy sigma=1.554084 ! Fit after self-cal, rms=0.136805Jy sigma=1.551468 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.136805Jy sigma=1.551468 ! Fit after self-cal, rms=0.134376Jy sigma=1.501169 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.069 mas, bmaj=3.432 mas, bpa=13.48 degrees ! Estimated noise=0.626887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000529338 Jy ! Component: 100 - total flux cleaned = -0.00204993 Jy ! Component: 150 - total flux cleaned = -0.00169114 Jy ! Component: 200 - total flux cleaned = -0.00201469 Jy ! Total flux subtracted in 200 components = -0.00201469 Jy ! Clean residual min=-0.011802 max=0.016658 Jy/beam ! Clean residual mean=0.000025 rms=0.003412 Jy/beam ! Combined flux in latest and established models = 1.41152 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 195 components and 1.41152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.131419Jy sigma=1.481994 ! Fit after self-cal, rms=0.131389Jy sigma=1.480957 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00972339 Jy ! Component: 100 - total flux cleaned = 0.00919819 Jy ! Component: 150 - total flux cleaned = 0.00964904 Jy ! Component: 200 - total flux cleaned = 0.0109114 Jy ! Total flux subtracted in 200 components = 0.0109114 Jy ! Clean residual min=-0.012070 max=0.013905 Jy/beam ! Clean residual mean=0.000024 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 1.42244 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 224 components and 1.42244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.126468Jy sigma=1.434590 ! Fit after self-cal, rms=0.126325Jy sigma=1.432444 ! Inverting map ! Added new window around map position (3.2, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361886 Jy ! Component: 100 - total flux cleaned = 0.00531993 Jy ! Component: 150 - total flux cleaned = 0.00609243 Jy ! Component: 200 - total flux cleaned = 0.00756031 Jy ! Total flux subtracted in 200 components = 0.00756031 Jy ! Clean residual min=-0.011558 max=0.013423 Jy/beam ! Clean residual mean=0.000021 rms=0.002979 Jy/beam ! Combined flux in latest and established models = 1.43 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 250 components and 1.43 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.122419Jy sigma=1.398827 ! Fit after self-cal, rms=0.122324Jy sigma=1.397285 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.122324Jy sigma=1.397285 ! Fit after self-cal, rms=0.122148Jy sigma=1.394104 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.279 mas, bmaj=5.191 mas, bpa=1.684 degrees ! Estimated noise=0.759216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201626 Jy ! Component: 100 - total flux cleaned = -0.000704378 Jy ! Component: 150 - total flux cleaned = 0.000222832 Jy ! Component: 200 - total flux cleaned = 0.00165776 Jy ! Total flux subtracted in 200 components = 0.00165776 Jy ! Clean residual min=-0.012852 max=0.011315 Jy/beam ! Clean residual mean=0.000054 rms=0.003167 Jy/beam ! Combined flux in latest and established models = 1.43165 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 269 components and 1.43165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.119986Jy sigma=1.381648 ! Fit after self-cal, rms=0.119934Jy sigma=1.380804 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000477502 Jy ! Component: 100 - total flux cleaned = 0.000742263 Jy ! Component: 150 - total flux cleaned = 0.000995078 Jy ! Component: 200 - total flux cleaned = 0.000994479 Jy ! Total flux subtracted in 200 components = 0.000994479 Jy ! Clean residual min=-0.012542 max=0.010557 Jy/beam ! Clean residual mean=0.000057 rms=0.003122 Jy/beam ! Combined flux in latest and established models = 1.43265 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 284 components and 1.43265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.118464Jy sigma=1.372783 ! Fit after self-cal, rms=0.118437Jy sigma=1.372369 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.069 mas, bmaj=3.435 mas, bpa=13.48 degrees ! Estimated noise=0.625705 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.069 x 3.435 at 13.48 degrees (North through East) ! Clean map min=-0.028669 max=1.0603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.118437Jy sigma=1.372369 ! Fit after self-cal, rms=0.111787Jy sigma=1.242333 ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=3.438 mas, bpa=13.44 degrees ! Estimated noise=0.623465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706441 Jy ! Component: 100 - total flux cleaned = -0.00136131 Jy ! Component: 150 - total flux cleaned = -0.000750378 Jy ! Component: 200 - total flux cleaned = -0.00105191 Jy ! Total flux subtracted in 200 components = -0.00105191 Jy ! Clean residual min=-0.011431 max=0.012956 Jy/beam ! Clean residual mean=0.000026 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 1.4316 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 313 components and 1.4316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.109180Jy sigma=1.224172 ! Fit after self-cal, rms=0.109153Jy sigma=1.223721 ! Inverting map ! Added new window around map position (6.2, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775762 Jy ! Component: 100 - total flux cleaned = 0.00939946 Jy ! Component: 150 - total flux cleaned = 0.0100229 Jy ! Component: 200 - total flux cleaned = 0.0100315 Jy ! Total flux subtracted in 200 components = 0.0100315 Jy ! Clean residual min=-0.010659 max=0.010793 Jy/beam ! Clean residual mean=0.000021 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 1.44163 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 342 components and 1.44163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.106343Jy sigma=1.200235 ! Fit after self-cal, rms=0.106291Jy sigma=1.199343 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.106291Jy sigma=1.199343 ! Fit after self-cal, rms=0.105994Jy sigma=1.195882 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8455 mas, bmaj=2.853 mas, bpa=15.82 degrees ! Estimated noise=0.868578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.853422 Jy ! Component: 100 - total flux cleaned = 1.05521 Jy ! Component: 150 - total flux cleaned = 1.14421 Jy ! Component: 200 - total flux cleaned = 1.20464 Jy ! Total flux subtracted in 200 components = 1.20464 Jy ! Clean residual min=-0.022944 max=0.041813 Jy/beam ! Clean residual mean=-0.000013 rms=0.007038 Jy/beam ! Combined flux in latest and established models = 1.20464 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.20464 Jy ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=3.438 mas, bpa=13.43 degrees ! Estimated noise=0.621344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748337 Jy ! Component: 100 - total flux cleaned = 0.119755 Jy ! Component: 150 - total flux cleaned = 0.151443 Jy ! Component: 200 - total flux cleaned = 0.172407 Jy ! Total flux subtracted in 200 components = 0.172407 Jy ! Clean residual min=-0.016928 max=0.024694 Jy/beam ! Clean residual mean=-0.000008 rms=0.004601 Jy/beam ! Combined flux in latest and established models = 1.37704 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 75 components and 1.37704 Jy ! Inverting map ! Added new window around map position (4.6, 49.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209554 Jy ! Component: 100 - total flux cleaned = 0.0370524 Jy ! Component: 150 - total flux cleaned = 0.0462473 Jy ! Component: 200 - total flux cleaned = 0.053321 Jy ! Total flux subtracted in 200 components = 0.053321 Jy ! Clean residual min=-0.014244 max=0.019346 Jy/beam ! Clean residual mean=-0.000010 rms=0.003860 Jy/beam ! Combined flux in latest and established models = 1.43037 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 115 components and 1.43037 Jy ! Inverting map ! Added new window around map position (-5, -50.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155198 Jy ! Component: 100 - total flux cleaned = 0.0198993 Jy ! Component: 150 - total flux cleaned = 0.0228663 Jy ! Component: 200 - total flux cleaned = 0.025688 Jy ! Total flux subtracted in 200 components = 0.025688 Jy ! Clean residual min=-0.012679 max=0.015863 Jy/beam ! Clean residual mean=-0.000013 rms=0.003433 Jy/beam ! Combined flux in latest and established models = 1.45605 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 156 components and 1.45605 Jy ! Inverting map ! Added new window around map position (-15.6, 23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741117 Jy ! Component: 100 - total flux cleaned = 0.0079357 Jy ! Component: 150 - total flux cleaned = 0.00942883 Jy ! Component: 200 - total flux cleaned = 0.0108653 Jy ! Total flux subtracted in 200 components = 0.0108653 Jy ! Clean residual min=-0.010872 max=0.014147 Jy/beam ! Clean residual mean=0.000001 rms=0.003170 Jy/beam ! Combined flux in latest and established models = 1.46692 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 185 components and 1.46692 Jy ! Inverting map ! Added new window around map position (-13.4, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977744 Jy ! Component: 100 - total flux cleaned = 0.0120247 Jy ! Component: 150 - total flux cleaned = 0.0137532 Jy ! Component: 200 - total flux cleaned = 0.0154297 Jy ! Total flux subtracted in 200 components = 0.0154297 Jy ! Clean residual min=-0.010457 max=0.011614 Jy/beam ! Clean residual mean=0.000002 rms=0.002965 Jy/beam ! Combined flux in latest and established models = 1.48235 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 215 components and 1.48235 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=5.19 mas, bpa=1.667 degrees ! Estimated noise=0.755145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324639 Jy ! Component: 100 - total flux cleaned = 0.00363145 Jy ! Component: 150 - total flux cleaned = 0.00398539 Jy ! Component: 200 - total flux cleaned = 0.00296508 Jy ! Total flux subtracted in 200 components = 0.00296508 Jy ! Clean residual min=-0.009720 max=0.011745 Jy/beam ! Clean residual mean=0.000010 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 1.48531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627547 Jy ! Component: 100 - total flux cleaned = -0.000628746 Jy ! Component: 150 - total flux cleaned = -0.000917949 Jy ! Component: 200 - total flux cleaned = -0.00120432 Jy ! Total flux subtracted in 200 components = -0.00120432 Jy ! Clean residual min=-0.009557 max=0.011107 Jy/beam ! Clean residual mean=0.000011 rms=0.002984 Jy/beam ! Combined flux in latest and established models = 1.48411 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 267 components and 1.48411 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=3.438 mas, bpa=13.43 degrees ! Estimated noise=0.621344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00410965 Jy ! Component: 100 - total flux cleaned = -0.00262167 Jy ! Component: 150 - total flux cleaned = -0.00226541 Jy ! Component: 200 - total flux cleaned = -0.00158504 Jy ! Total flux subtracted in 200 components = -0.00158504 Jy ! Clean residual min=-0.009886 max=0.010718 Jy/beam ! Clean residual mean=0.000002 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 1.48252 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 292 components and 1.48252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.108366Jy sigma=1.208326 ! Fit after self-cal, rms=0.108054Jy sigma=1.201678 wmodel /scr/pima/bg219e_uvs/J1625-2527_X_map.mod ! Writing 292 model components to file: /scr/pima/bg219e_uvs/J1625-2527_X_map.mod wobs /scr/pima/bg219e_uvs/J1625-2527_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1625-2527_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1625-2527_X_map.win ! wwins: Wrote 12 windows to /scr/pima/bg219e_uvs/J1625-2527_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350333 Jy ! Component: 100 - total flux cleaned = 0.00526599 Jy ! Component: 150 - total flux cleaned = 0.00695315 Jy ! Component: 200 - total flux cleaned = 0.00809522 Jy ! Component: 250 - total flux cleaned = 0.00920605 Jy ! Component: 300 - total flux cleaned = 0.0101313 Jy ! Component: 350 - total flux cleaned = 0.0111876 Jy ! Component: 400 - total flux cleaned = 0.0117756 Jy ! Component: 450 - total flux cleaned = 0.011776 Jy ! Component: 500 - total flux cleaned = 0.0122027 Jy ! Component: 550 - total flux cleaned = 0.0122026 Jy ! Component: 600 - total flux cleaned = 0.0123402 Jy ! Component: 650 - total flux cleaned = 0.0122062 Jy ! Component: 700 - total flux cleaned = 0.0124728 Jy ! Component: 750 - total flux cleaned = 0.0123406 Jy ! Component: 800 - total flux cleaned = 0.0122096 Jy ! Component: 850 - total flux cleaned = 0.0122094 Jy ! Component: 900 - total flux cleaned = 0.0118295 Jy ! Component: 950 - total flux cleaned = 0.0115783 Jy ! Component: 1000 - total flux cleaned = 0.0110842 Jy ! Component: 1050 - total flux cleaned = 0.0109631 Jy ! Component: 1100 - total flux cleaned = 0.0107216 Jy ! Component: 1150 - total flux cleaned = 0.0106026 Jy ! Component: 1200 - total flux cleaned = 0.0101289 Jy ! Component: 1250 - total flux cleaned = 0.00989576 Jy ! Component: 1300 - total flux cleaned = 0.00966349 Jy ! Component: 1350 - total flux cleaned = 0.00966324 Jy ! Component: 1400 - total flux cleaned = 0.00920929 Jy ! Component: 1450 - total flux cleaned = 0.00909728 Jy ! Component: 1500 - total flux cleaned = 0.00887437 Jy ! Component: 1550 - total flux cleaned = 0.00887567 Jy ! Component: 1600 - total flux cleaned = 0.00887495 Jy ! Component: 1650 - total flux cleaned = 0.00876595 Jy ! Component: 1700 - total flux cleaned = 0.00855121 Jy ! Component: 1750 - total flux cleaned = 0.00865795 Jy ! Component: 1800 - total flux cleaned = 0.00855211 Jy ! Component: 1850 - total flux cleaned = 0.00844798 Jy ! Component: 1900 - total flux cleaned = 0.00844895 Jy ! Component: 1950 - total flux cleaned = 0.00844919 Jy ! Component: 2000 - total flux cleaned = 0.00855169 Jy ! Component: 2050 - total flux cleaned = 0.00845005 Jy ! Component: 2100 - total flux cleaned = 0.00844939 Jy ! Component: 2150 - total flux cleaned = 0.00834935 Jy ! Component: 2200 - total flux cleaned = 0.00854845 Jy ! Component: 2250 - total flux cleaned = 0.00844997 Jy ! Component: 2300 - total flux cleaned = 0.00864531 Jy ! Component: 2350 - total flux cleaned = 0.00864446 Jy ! Component: 2400 - total flux cleaned = 0.00845227 Jy ! Component: 2450 - total flux cleaned = 0.00854852 Jy ! Component: 2500 - total flux cleaned = 0.00892885 Jy ! Component: 2550 - total flux cleaned = 0.00892889 Jy ! Component: 2600 - total flux cleaned = 0.00921073 Jy ! Component: 2650 - total flux cleaned = 0.00939584 Jy ! Component: 2700 - total flux cleaned = 0.00948718 Jy ! Component: 2750 - total flux cleaned = 0.00930415 Jy ! Component: 2800 - total flux cleaned = 0.00975961 Jy ! Component: 2850 - total flux cleaned = 0.00966842 Jy ! Component: 2900 - total flux cleaned = 0.00993775 Jy ! Component: 2950 - total flux cleaned = 0.0100267 Jy ! Component: 3000 - total flux cleaned = 0.0100265 Jy ! Component: 3050 - total flux cleaned = 0.0100259 Jy ! Component: 3100 - total flux cleaned = 0.0102012 Jy ! Component: 3150 - total flux cleaned = 0.0102006 Jy ! Component: 3200 - total flux cleaned = 0.0102872 Jy ! Component: 3250 - total flux cleaned = 0.010373 Jy ! Component: 3300 - total flux cleaned = 0.0105437 Jy ! Component: 3350 - total flux cleaned = 0.0106283 Jy ! Component: 3400 - total flux cleaned = 0.0107142 Jy ! Component: 3450 - total flux cleaned = 0.0108829 Jy ! Component: 3500 - total flux cleaned = 0.0109672 Jy ! Component: 3550 - total flux cleaned = 0.0111333 Jy ! Component: 3600 - total flux cleaned = 0.0111333 Jy ! Component: 3650 - total flux cleaned = 0.0112154 Jy ! Component: 3700 - total flux cleaned = 0.0113789 Jy ! Component: 3750 - total flux cleaned = 0.0114602 Jy ! Component: 3800 - total flux cleaned = 0.0119439 Jy ! Component: 3850 - total flux cleaned = 0.0118638 Jy ! Component: 3900 - total flux cleaned = 0.0118641 Jy ! Component: 3950 - total flux cleaned = 0.0120228 Jy ! Component: 4000 - total flux cleaned = 0.0121017 Jy ! Component: 4050 - total flux cleaned = 0.0122581 Jy ! Total flux subtracted in 4096 components = 0.0122576 Jy ! Clean residual min=-0.004377 max=0.004072 Jy/beam ! Clean residual mean=-0.000010 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 1.49478 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 594 components and 1.49478 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1625-2527_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.067 x 3.438 at 13.43 degrees (North through East) ! Clean map min=-0.01946 max=1.0495 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1625-2527_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.04949 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00153787 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.439606 0.439606 0.879213 1.75843 3.51685 7.0337 14.0674 28.1348 56.2696 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.049 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 682.428 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1625-2527_X_uvs.log closed on Thu Apr 7 09:13:19 2016