! Started logfile: /scr/pima/bg219e_uvs/J1625-2527_X_dfm.log on Thu May 19 18:47:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1625-2527_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1625-2527_X_uva.fits
! AN table 1: 32 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.829861 visibilities/baseline/integration-bin.
! Found source: J1625-2527
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11472 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1625-2527_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.554991Jy  sigma=21.607571
! Fit after  self-cal, rms=0.319441Jy  sigma=4.158424
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8116 mas, bmaj=2.751 mas, bpa=16.49 degrees
! Estimated noise=0.745802 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.86581 Jy
! Component: 100  -  total flux cleaned = 1.05882 Jy
! Total flux subtracted in 100 components = 1.05882 Jy
! Clean residual min=-0.043534 max=0.101623 Jy/beam
! Clean residual mean=-0.000008 rms=0.010227 Jy/beam
! Combined flux in latest and established models = 1.05882 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.05882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.290051Jy  sigma=3.702909
! Fit after  self-cal, rms=0.289940Jy  sigma=3.701232
! Inverting map 
! Added new window around map position (-1.2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0984537 Jy
! Component: 100  -  total flux cleaned = 0.158261 Jy
! Total flux subtracted in 100 components = 0.158261 Jy
! Clean residual min=-0.035538 max=0.069133 Jy/beam
! Clean residual mean=-0.000009 rms=0.007996 Jy/beam
! Combined flux in latest and established models = 1.21708 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 31 components and 1.21708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.223671Jy  sigma=2.770099
! Fit after  self-cal, rms=0.221372Jy  sigma=2.729429
! Inverting map 
! Added new window around map position (1.4, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0566465 Jy
! Component: 100  -  total flux cleaned = 0.0933658 Jy
! Total flux subtracted in 100 components = 0.0933658 Jy
! Clean residual min=-0.030156 max=0.040576 Jy/beam
! Clean residual mean=-0.000005 rms=0.007073 Jy/beam
! Combined flux in latest and established models = 1.31045 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 1.31045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.193069Jy  sigma=2.362520
! Fit after  self-cal, rms=0.192839Jy  sigma=2.358944
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=3.39 mas, bpa=13.3 degrees
! Estimated noise=0.492002 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0552845 Jy
! Component: 100  -  total flux cleaned = 0.0880862 Jy
! Component: 150  -  total flux cleaned = 0.107434 Jy
! Component: 200  -  total flux cleaned = 0.114558 Jy
! Total flux subtracted in 200 components = 0.114558 Jy
! Clean residual min=-0.023163 max=0.030234 Jy/beam
! Clean residual mean=-0.000016 rms=0.005584 Jy/beam
! Combined flux in latest and established models = 1.425 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 73 components and 1.425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.174716Jy  sigma=2.071075
! Fit after  self-cal, rms=0.174326Jy  sigma=2.064924
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.063 x 3.39 at 13.3 degrees (North through East)
! Clean map  min=-0.021639  max=1.0883 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.20     KP        0.98     
!   LA        0.99     NL        1.01     OV        0.98     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.19     KP        0.99     
!   LA        0.98     NL        0.99     OV        0.98     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.19     KP        0.99     
!   LA        0.97     NL        1.01     OV        0.98     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.19     KP        0.99     
!   LA        0.96     NL        1.01     OV        0.97     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.17     KP        0.98     
!   LA        0.97     NL        0.99     OV        0.98     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.16     KP        0.98     
!   LA        0.97     NL        1.00     OV        0.97     PT        0.90     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.20     KP        0.98     
!   LA        0.97     NL        0.98     OV        0.96     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.19     KP        0.97     
!   LA        0.97     NL        0.99     OV        0.97     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.17     KP        0.97     
!   LA        0.97     NL        0.98     OV        0.97     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.18     KP        0.97     
!   LA        0.97     NL        1.00     OV        0.96     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.19     KP        0.97     
!   LA        0.97     NL        0.97     OV        0.95     PT        1.01     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.174326Jy  sigma=2.064924
! Fit after  self-cal, rms=0.166407Jy  sigma=1.849998
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=3.443 mas, bpa=13.7 degrees
! Estimated noise=0.491057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0198403 Jy
! Component: 100  -  total flux cleaned = -0.022265 Jy
! Component: 150  -  total flux cleaned = -0.0222554 Jy
! Component: 200  -  total flux cleaned = -0.0222138 Jy
! Total flux subtracted in 200 components = -0.0222138 Jy
! Clean residual min=-0.017794 max=0.022431 Jy/beam
! Clean residual mean=-0.000001 rms=0.004353 Jy/beam
! Combined flux in latest and established models = 1.40279 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 1.40279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.162805Jy  sigma=1.781293
! Fit after  self-cal, rms=0.162751Jy  sigma=1.780003
! Inverting map 
! Added new window around map position (-2, 17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325211 Jy
! Component: 100  -  total flux cleaned = 0.00118058 Jy
! Component: 150  -  total flux cleaned = -0.000599848 Jy
! Component: 200  -  total flux cleaned = -0.000595144 Jy
! Total flux subtracted in 200 components = -0.000595144 Jy
! Clean residual min=-0.015885 max=0.020173 Jy/beam
! Clean residual mean=0.000000 rms=0.004035 Jy/beam
! Combined flux in latest and established models = 1.4022 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 1.4022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.155556Jy  sigma=1.708164
! Fit after  self-cal, rms=0.155332Jy  sigma=1.703642
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.155332Jy  sigma=1.703642
! Fit after  self-cal, rms=0.150285Jy  sigma=1.650633
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=3.42 mas, bpa=13.49 degrees
! Estimated noise=0.486514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163335 Jy
! Component: 100  -  total flux cleaned = 0.000181206 Jy
! Component: 150  -  total flux cleaned = -0.000264592 Jy
! Component: 200  -  total flux cleaned = -0.00105955 Jy
! Total flux subtracted in 200 components = -0.00105955 Jy
! Clean residual min=-0.015720 max=0.017282 Jy/beam
! Clean residual mean=0.000023 rms=0.003730 Jy/beam
! Combined flux in latest and established models = 1.40114 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 133 components and 1.40114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.146432Jy  sigma=1.623198
! Fit after  self-cal, rms=0.146398Jy  sigma=1.621586
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23.2, -44.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00792679 Jy
! Component: 100  -  total flux cleaned = 0.00512724 Jy
! Component: 150  -  total flux cleaned = 0.00341026 Jy
! Component: 200  -  total flux cleaned = 0.0022603 Jy
! Total flux subtracted in 200 components = 0.0022603 Jy
! Clean residual min=-0.015193 max=0.016766 Jy/beam
! Clean residual mean=0.000020 rms=0.003575 Jy/beam
! Combined flux in latest and established models = 1.4034 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 158 components and 1.4034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.142415Jy  sigma=1.588233
! Fit after  self-cal, rms=0.142314Jy  sigma=1.585785
! Inverting map 
! Added new window around map position (-3.2, -44.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00900555 Jy
! Component: 100  -  total flux cleaned = 0.0102988 Jy
! Component: 150  -  total flux cleaned = 0.0114744 Jy
! Component: 200  -  total flux cleaned = 0.0111141 Jy
! Total flux subtracted in 200 components = 0.0111141 Jy
! Clean residual min=-0.013960 max=0.015295 Jy/beam
! Clean residual mean=0.000016 rms=0.003377 Jy/beam
! Combined flux in latest and established models = 1.41451 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 193 components and 1.41451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138736Jy  sigma=1.552904
! Fit after  self-cal, rms=0.138565Jy  sigma=1.550196
! Inverting map 
! Added new window around map position (12.6, 40.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139144 Jy
! Component: 100  -  total flux cleaned = 0.0190935 Jy
! Component: 150  -  total flux cleaned = 0.0209169 Jy
! Component: 200  -  total flux cleaned = 0.0219658 Jy
! Total flux subtracted in 200 components = 0.0219658 Jy
! Clean residual min=-0.013372 max=0.013800 Jy/beam
! Clean residual mean=0.000005 rms=0.003204 Jy/beam
! Combined flux in latest and established models = 1.43648 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 220 components and 1.43648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135285Jy  sigma=1.523951
! Fit after  self-cal, rms=0.135214Jy  sigma=1.522505
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135214Jy  sigma=1.522505
! Fit after  self-cal, rms=0.133694Jy  sigma=1.487494
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=3.424 mas, bpa=13.46 degrees
! Estimated noise=0.485204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000866694 Jy
! Component: 100  -  total flux cleaned = 0.00019462 Jy
! Component: 150  -  total flux cleaned = -0.000810343 Jy
! Component: 200  -  total flux cleaned = -0.0014408 Jy
! Total flux subtracted in 200 components = -0.0014408 Jy
! Clean residual min=-0.012642 max=0.013752 Jy/beam
! Clean residual mean=0.000011 rms=0.002956 Jy/beam
! Combined flux in latest and established models = 1.43504 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 247 components and 1.43504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131147Jy  sigma=1.470974
! Fit after  self-cal, rms=0.131120Jy  sigma=1.470264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.4, 22.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00434025 Jy
! Component: 100  -  total flux cleaned = 0.00473222 Jy
! Component: 150  -  total flux cleaned = 0.00544274 Jy
! Component: 200  -  total flux cleaned = 0.00479196 Jy
! Total flux subtracted in 200 components = 0.00479196 Jy
! Clean residual min=-0.012818 max=0.012475 Jy/beam
! Clean residual mean=0.000014 rms=0.002837 Jy/beam
! Combined flux in latest and established models = 1.43983 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 267 components and 1.43983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.127903Jy  sigma=1.443696
! Fit after  self-cal, rms=0.127829Jy  sigma=1.442465
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.127829Jy  sigma=1.442465
! Fit after  self-cal, rms=0.127614Jy  sigma=1.440438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=5.188 mas, bpa=1.484 degrees
! Estimated noise=0.58461 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00510569 Jy
! Component: 100  -  total flux cleaned = -0.00569292 Jy
! Component: 150  -  total flux cleaned = -0.00622351 Jy
! Component: 200  -  total flux cleaned = -0.00646727 Jy
! Total flux subtracted in 200 components = -0.00646727 Jy
! Clean residual min=-0.013328 max=0.010445 Jy/beam
! Clean residual mean=0.000025 rms=0.003024 Jy/beam
! Combined flux in latest and established models = 1.43336 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 284 components and 1.43336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125927Jy  sigma=1.431022
! Fit after  self-cal, rms=0.125874Jy  sigma=1.430334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000809756 Jy
! Component: 100  -  total flux cleaned = 9.53995e-05 Jy
! Component: 150  -  total flux cleaned = 9.6287e-05 Jy
! Component: 200  -  total flux cleaned = 9.07695e-05 Jy
! Total flux subtracted in 200 components = 9.07695e-05 Jy
! Clean residual min=-0.013068 max=0.010553 Jy/beam
! Clean residual mean=0.000025 rms=0.002964 Jy/beam
! Combined flux in latest and established models = 1.43345 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 300 components and 1.43345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124673Jy  sigma=1.424815
! Fit after  self-cal, rms=0.124648Jy  sigma=1.424418
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=3.425 mas, bpa=13.45 degrees
! Estimated noise=0.484005 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.066 x 3.425 at 13.45 degrees (North through East)
! Clean map  min=-0.025249  max=1.054 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124648Jy  sigma=1.424418
! Fit after  self-cal, rms=0.118111Jy  sigma=1.299535
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=3.428 mas, bpa=13.41 degrees
! Estimated noise=0.481961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123884 Jy
! Component: 100  -  total flux cleaned = 0.00050981 Jy
! Component: 150  -  total flux cleaned = 0.000790246 Jy
! Component: 200  -  total flux cleaned = 0.00158761 Jy
! Total flux subtracted in 200 components = 0.00158761 Jy
! Clean residual min=-0.010841 max=0.012824 Jy/beam
! Clean residual mean=0.000014 rms=0.002675 Jy/beam
! Combined flux in latest and established models = 1.43504 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 320 components and 1.43504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115900Jy  sigma=1.285266
! Fit after  self-cal, rms=0.115890Jy  sigma=1.284702
! Inverting map 
! Added new window around map position (-2.4, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.43459e-05 Jy
! Component: 100  -  total flux cleaned = -0.00202897 Jy
! Component: 150  -  total flux cleaned = -0.00380085 Jy
! Component: 200  -  total flux cleaned = -0.00442505 Jy
! Total flux subtracted in 200 components = -0.00442505 Jy
! Clean residual min=-0.009991 max=0.011979 Jy/beam
! Clean residual mean=0.000012 rms=0.002535 Jy/beam
! Combined flux in latest and established models = 1.43061 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 343 components and 1.43061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112360Jy  sigma=1.251519
! Fit after  self-cal, rms=0.112240Jy  sigma=1.248987
! Inverting map 
! Added new window around map position (-6, 12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.006092 Jy
! Component: 100  -  total flux cleaned = 0.00646358 Jy
! Component: 150  -  total flux cleaned = 0.00677573 Jy
! Component: 200  -  total flux cleaned = 0.00646569 Jy
! Total flux subtracted in 200 components = 0.00646569 Jy
! Clean residual min=-0.009314 max=0.010126 Jy/beam
! Clean residual mean=0.000012 rms=0.002414 Jy/beam
! Combined flux in latest and established models = 1.43708 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 371 components and 1.43708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109396Jy  sigma=1.223427
! Fit after  self-cal, rms=0.109339Jy  sigma=1.222522
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109339Jy  sigma=1.222522
! Fit after  self-cal, rms=0.108937Jy  sigma=1.216802
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8098 mas, bmaj=2.776 mas, bpa=16.56 degrees
! Estimated noise=0.733679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.850666 Jy
! Component: 100  -  total flux cleaned = 1.05254 Jy
! Component: 150  -  total flux cleaned = 1.13806 Jy
! Component: 200  -  total flux cleaned = 1.19703 Jy
! Total flux subtracted in 200 components = 1.19703 Jy
! Clean residual min=-0.023040 max=0.038029 Jy/beam
! Clean residual mean=-0.000005 rms=0.006097 Jy/beam
! Combined flux in latest and established models = 1.19703 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 1.19703 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=3.426 mas, bpa=13.39 degrees
! Estimated noise=0.480863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0783629 Jy
! Component: 100  -  total flux cleaned = 0.12474 Jy
! Component: 150  -  total flux cleaned = 0.157644 Jy
! Component: 200  -  total flux cleaned = 0.183546 Jy
! Total flux subtracted in 200 components = 0.183546 Jy
! Clean residual min=-0.017240 max=0.023143 Jy/beam
! Clean residual mean=-0.000012 rms=0.004146 Jy/beam
! Combined flux in latest and established models = 1.38057 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 77 components and 1.38057 Jy
! Inverting map 
! Added new window around map position (2.4, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121702 Jy
! Component: 100  -  total flux cleaned = 0.023356 Jy
! Component: 150  -  total flux cleaned = 0.0327976 Jy
! Component: 200  -  total flux cleaned = 0.0394835 Jy
! Total flux subtracted in 200 components = 0.0394835 Jy
! Clean residual min=-0.014399 max=0.017641 Jy/beam
! Clean residual mean=-0.000004 rms=0.003503 Jy/beam
! Combined flux in latest and established models = 1.42006 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 117 components and 1.42006 Jy
! Inverting map 
! Added new window around map position (6.4, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00748663 Jy
! Component: 100  -  total flux cleaned = 0.0099183 Jy
! Component: 150  -  total flux cleaned = 0.0128447 Jy
! Component: 200  -  total flux cleaned = 0.0161692 Jy
! Total flux subtracted in 200 components = 0.0161692 Jy
! Clean residual min=-0.012355 max=0.015454 Jy/beam
! Clean residual mean=-0.000004 rms=0.003182 Jy/beam
! Combined flux in latest and established models = 1.43623 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 156 components and 1.43623 Jy
! Inverting map 
! Added new window around map position (2.2, -16.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110842 Jy
! Component: 100  -  total flux cleaned = 0.0131889 Jy
! Component: 150  -  total flux cleaned = 0.0141929 Jy
! Component: 200  -  total flux cleaned = 0.0161476 Jy
! Total flux subtracted in 200 components = 0.0161476 Jy
! Clean residual min=-0.010762 max=0.014622 Jy/beam
! Clean residual mean=-0.000003 rms=0.002932 Jy/beam
! Combined flux in latest and established models = 1.45238 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 188 components and 1.45238 Jy
! Inverting map 
! Added new window around map position (-13.4, -22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00910317 Jy
! Component: 100  -  total flux cleaned = 0.0118646 Jy
! Component: 150  -  total flux cleaned = 0.0136376 Jy
! Component: 200  -  total flux cleaned = 0.0149186 Jy
! Total flux subtracted in 200 components = 0.0149186 Jy
! Clean residual min=-0.010274 max=0.011780 Jy/beam
! Clean residual mean=-0.000002 rms=0.002735 Jy/beam
! Combined flux in latest and established models = 1.46729 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 220 components and 1.46729 Jy
! Inverting map 
! Added new window around map position (-15.6, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00811761 Jy
! Component: 100  -  total flux cleaned = 0.00773185 Jy
! Component: 150  -  total flux cleaned = 0.00812598 Jy
! Component: 200  -  total flux cleaned = 0.00849413 Jy
! Total flux subtracted in 200 components = 0.00849413 Jy
! Clean residual min=-0.009603 max=0.011015 Jy/beam
! Clean residual mean=0.000006 rms=0.002568 Jy/beam
! Combined flux in latest and established models = 1.47579 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 249 components and 1.47579 Jy
! Inverting map 
! Added new window around map position (4.6, -28).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00576559 Jy
! Component: 100  -  total flux cleaned = 0.00721787 Jy
! Component: 150  -  total flux cleaned = 0.0082809 Jy
! Component: 200  -  total flux cleaned = 0.00895853 Jy
! Total flux subtracted in 200 components = 0.00895853 Jy
! Clean residual min=-0.009426 max=0.009154 Jy/beam
! Clean residual mean=0.000012 rms=0.002441 Jy/beam
! Combined flux in latest and established models = 1.48475 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 278 components and 1.48475 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=5.181 mas, bpa=1.476 degrees
! Estimated noise=0.581915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00051086 Jy
! Component: 100  -  total flux cleaned = -0.000860033 Jy
! Component: 150  -  total flux cleaned = -0.000857343 Jy
! Component: 200  -  total flux cleaned = 3.67979e-05 Jy
! Total flux subtracted in 200 components = 3.67979e-05 Jy
! Clean residual min=-0.009818 max=0.009449 Jy/beam
! Clean residual mean=0.000024 rms=0.002744 Jy/beam
! Combined flux in latest and established models = 1.48478 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115975 Jy
! Component: 100  -  total flux cleaned = -0.00170197 Jy
! Component: 150  -  total flux cleaned = -0.0014389 Jy
! Component: 200  -  total flux cleaned = -0.00169985 Jy
! Total flux subtracted in 200 components = -0.00169985 Jy
! Clean residual min=-0.009312 max=0.009099 Jy/beam
! Clean residual mean=0.000024 rms=0.002617 Jy/beam
! Combined flux in latest and established models = 1.48308 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 338 components and 1.48308 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=3.426 mas, bpa=13.39 degrees
! Estimated noise=0.480863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00554079 Jy
! Component: 100  -  total flux cleaned = -0.00621253 Jy
! Component: 150  -  total flux cleaned = -0.00592276 Jy
! Component: 200  -  total flux cleaned = -0.00622805 Jy
! Total flux subtracted in 200 components = -0.00622805 Jy
! Clean residual min=-0.009006 max=0.008890 Jy/beam
! Clean residual mean=0.000010 rms=0.002172 Jy/beam
! Combined flux in latest and established models = 1.47685 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 372 components and 1.47685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105578Jy  sigma=1.176647
! Fit after  self-cal, rms=0.105232Jy  sigma=1.169728
wmodel /J1625-2527_X_map.mod
! wmodel: Unable to open new model file: /J1625-2527_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1625-2527_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.065 x 3.426 at 13.39 degrees (North through East)
! Clean map  min=-0.021623  max=1.0532 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1625-2527_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.05321 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00213857 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.609154 0.609154 1.21831 2.43662 4.87323 9.74647 19.4929 38.9859 77.9717
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0064 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.053 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  492.486 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1625-2527_X_dfm.log closed on Thu May 19 18:47:24 2016