! Started logfile: /scr/pima/bg219e_uvs/J1616+3621_X_dfm.log on Thu May 19 18:46:46 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1616+3621_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1616+3621_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.715278 visibilities/baseline/integration-bin.
! Found source: J1616+3621
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18540 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1616+3621_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010713Jy  sigma=23.887834
! Fit after  self-cal, rms=0.893939Jy  sigma=21.043519
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9158 mas, bmaj=1.76 mas, bpa=23.26 degrees
! Estimated noise=0.474092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0759339 Jy
! Component: 100  -  total flux cleaned = 0.100065 Jy
! Total flux subtracted in 100 components = 0.100065 Jy
! Clean residual min=-0.006141 max=0.011782 Jy/beam
! Clean residual mean=0.000004 rms=0.001672 Jy/beam
! Combined flux in latest and established models = 0.100065 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.100065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068824Jy  sigma=1.573696
! Fit after  self-cal, rms=0.068734Jy  sigma=1.571561
! Inverting map 
! Added new window around map position (-2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146701 Jy
! Component: 100  -  total flux cleaned = 0.0247172 Jy
! Total flux subtracted in 100 components = 0.0247172 Jy
! Clean residual min=-0.004725 max=0.005510 Jy/beam
! Clean residual mean=0.000002 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.124782 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.124782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063604Jy  sigma=1.435413
! Fit after  self-cal, rms=0.063474Jy  sigma=1.432085
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0077904 Jy
! Component: 100  -  total flux cleaned = 0.0132604 Jy
! Total flux subtracted in 100 components = 0.0132604 Jy
! Clean residual min=-0.003961 max=0.005063 Jy/beam
! Clean residual mean=0.000001 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.138043 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.138043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061860Jy  sigma=1.388711
! Fit after  self-cal, rms=0.061817Jy  sigma=1.387698
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=2.003 mas, bpa=16.95 degrees
! Estimated noise=0.22653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00884764 Jy
! Component: 100  -  total flux cleaned = 0.0148063 Jy
! Component: 150  -  total flux cleaned = 0.0190671 Jy
! Component: 200  -  total flux cleaned = 0.0222109 Jy
! Total flux subtracted in 200 components = 0.0222109 Jy
! Clean residual min=-0.002757 max=0.003676 Jy/beam
! Clean residual mean=-0.000001 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.160253 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 60 components and 0.160253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060364Jy  sigma=1.347226
! Fit after  self-cal, rms=0.060221Jy  sigma=1.343751
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.158 x 2.003 at 16.95 degrees (North through East)
! Clean map  min=-0.0022179  max=0.10652 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.02     OV        0.96     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.03     KP        0.99     
!   LA        0.97     MK        1.08     NL        1.04     OV        0.94     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.98     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.98     KP        1.01     
!   LA        0.97     MK        0.96     NL        1.05     OV        0.98     
!   PT        0.92     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.93     HN        1.02     KP        1.00     
!   LA        1.00     MK        1.18     NL        1.02     OV        1.01     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.97     KP        0.97     
!   LA        1.00     MK        1.12     NL        1.07     OV        0.99     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.01     KP        1.00     
!   LA        1.02     MK        1.11     NL        1.04     OV        0.99     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.97     KP        0.99     
!   LA        1.00     MK        1.05     NL        1.02     OV        1.00     
!   PT        0.93     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.99     KP        0.97     
!   LA        0.99     MK        1.04     NL        1.03     OV        0.98     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.10     KP        1.02     
!   LA        1.00     MK        1.04     NL        1.02     OV        1.00     
!   PT        0.91     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.96     KP        0.97     
!   LA        1.01     MK        1.06     NL        1.04     OV        1.01     
!   PT        0.93     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.060221Jy  sigma=1.343751
! Fit after  self-cal, rms=0.059710Jy  sigma=1.335650
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=2.009 mas, bpa=16.93 degrees
! Estimated noise=0.224485 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227661 Jy
! Component: 100  -  total flux cleaned = 0.00339868 Jy
! Component: 150  -  total flux cleaned = 0.00367173 Jy
! Component: 200  -  total flux cleaned = 0.00367158 Jy
! Total flux subtracted in 200 components = 0.00367158 Jy
! Clean residual min=-0.001661 max=0.001529 Jy/beam
! Clean residual mean=0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.163925 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 87 components and 0.163925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059622Jy  sigma=1.333081
! Fit after  self-cal, rms=0.059612Jy  sigma=1.332516
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059612Jy  sigma=1.332516
! Fit after  self-cal, rms=0.059545Jy  sigma=1.329045
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.168 mas, bmaj=2.01 mas, bpa=16.87 degrees
! Estimated noise=0.224668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000830345 Jy
! Component: 100  -  total flux cleaned = 0.00101476 Jy
! Component: 150  -  total flux cleaned = 0.00108933 Jy
! Component: 200  -  total flux cleaned = 0.00115201 Jy
! Total flux subtracted in 200 components = 0.00115201 Jy
! Clean residual min=-0.001278 max=0.001377 Jy/beam
! Clean residual mean=0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.165077 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.165077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059519Jy  sigma=1.328377
! Fit after  self-cal, rms=0.059519Jy  sigma=1.328226
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (48.8, -45.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011557 Jy
! Component: 100  -  total flux cleaned = 0.00145966 Jy
! Component: 150  -  total flux cleaned = 0.00169053 Jy
! Component: 200  -  total flux cleaned = 0.00191363 Jy
! Total flux subtracted in 200 components = 0.00191363 Jy
! Clean residual min=-0.001194 max=0.001206 Jy/beam
! Clean residual mean=0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.166991 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 108 components and 0.166991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059486Jy  sigma=1.327459
! Fit after  self-cal, rms=0.059483Jy  sigma=1.327406
! Inverting map 
! Added new window around map position (-26.4, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109473 Jy
! Component: 100  -  total flux cleaned = 0.00162041 Jy
! Component: 150  -  total flux cleaned = 0.0020217 Jy
! Component: 200  -  total flux cleaned = 0.00226022 Jy
! Total flux subtracted in 200 components = 0.00226022 Jy
! Clean residual min=-0.001088 max=0.001174 Jy/beam
! Clean residual mean=0.000000 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.169251 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.169251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059457Jy  sigma=1.326789
! Fit after  self-cal, rms=0.059455Jy  sigma=1.326752
! Inverting map 
! Added new window around map position (49.2, 17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000896329 Jy
! Component: 100  -  total flux cleaned = 0.00119075 Jy
! Component: 150  -  total flux cleaned = 0.00143415 Jy
! Component: 200  -  total flux cleaned = 0.00156596 Jy
! Total flux subtracted in 200 components = 0.00156596 Jy
! Clean residual min=-0.001091 max=0.001074 Jy/beam
! Clean residual mean=-0.000000 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.170817 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 132 components and 0.170817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059432Jy  sigma=1.326305
! Fit after  self-cal, rms=0.059431Jy  sigma=1.326285
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059431Jy  sigma=1.326285
! Fit after  self-cal, rms=0.059250Jy  sigma=1.326194
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.009 mas, bpa=16.82 degrees
! Estimated noise=0.224114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0003937 Jy
! Component: 100  -  total flux cleaned = 0.000508057 Jy
! Component: 150  -  total flux cleaned = 0.00061259 Jy
! Component: 200  -  total flux cleaned = 0.000727313 Jy
! Total flux subtracted in 200 components = 0.000727313 Jy
! Clean residual min=-0.001119 max=0.001004 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.171544 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 143 components and 0.171544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059239Jy  sigma=1.325981
! Fit after  self-cal, rms=0.059239Jy  sigma=1.325970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000186104 Jy
! Component: 100  -  total flux cleaned = 0.0002947 Jy
! Component: 150  -  total flux cleaned = 0.000382998 Jy
! Component: 200  -  total flux cleaned = 0.000439316 Jy
! Total flux subtracted in 200 components = 0.000439316 Jy
! Clean residual min=-0.001123 max=0.000977 Jy/beam
! Clean residual mean=-0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.171984 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 153 components and 0.171984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059232Jy  sigma=1.325823
! Fit after  self-cal, rms=0.059232Jy  sigma=1.325819
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059232Jy  sigma=1.325819
! Fit after  self-cal, rms=0.059181Jy  sigma=1.325811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.588 mas, bpa=6.635 degrees
! Estimated noise=0.259231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250869 Jy
! Component: 100  -  total flux cleaned = 0.000401677 Jy
! Component: 150  -  total flux cleaned = 0.000587113 Jy
! Component: 200  -  total flux cleaned = 0.00076185 Jy
! Total flux subtracted in 200 components = 0.00076185 Jy
! Clean residual min=-0.001050 max=0.000927 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.172745 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 176 components and 0.172745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059180Jy  sigma=1.325750
! Fit after  self-cal, rms=0.059179Jy  sigma=1.325734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134577 Jy
! Component: 100  -  total flux cleaned = 0.000278243 Jy
! Component: 150  -  total flux cleaned = 0.000353485 Jy
! Component: 200  -  total flux cleaned = 0.000402792 Jy
! Total flux subtracted in 200 components = 0.000402792 Jy
! Clean residual min=-0.001003 max=0.000929 Jy/beam
! Clean residual mean=-0.000001 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.173148 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 189 components and 0.173148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059178Jy  sigma=1.325699
! Fit after  self-cal, rms=0.059177Jy  sigma=1.325694
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.009 mas, bpa=16.81 degrees
! Estimated noise=0.223996 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.167 x 2.009 at 16.81 degrees (North through East)
! Clean map  min=-0.0011898  max=0.10495 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9206 mas, bmaj=1.763 mas, bpa=23.08 degrees
! Estimated noise=0.472143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0750909 Jy
! Component: 100  -  total flux cleaned = 0.0996264 Jy
! Component: 150  -  total flux cleaned = 0.11492 Jy
! Component: 200  -  total flux cleaned = 0.125366 Jy
! Total flux subtracted in 200 components = 0.125366 Jy
! Clean residual min=-0.004643 max=0.005836 Jy/beam
! Clean residual mean=0.000002 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.125366 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.125366 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.009 mas, bpa=16.81 degrees
! Estimated noise=0.223996 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121707 Jy
! Component: 100  -  total flux cleaned = 0.0203175 Jy
! Component: 150  -  total flux cleaned = 0.0259696 Jy
! Component: 200  -  total flux cleaned = 0.0299988 Jy
! Total flux subtracted in 200 components = 0.0299988 Jy
! Clean residual min=-0.002049 max=0.002293 Jy/beam
! Clean residual mean=-0.000001 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.155365 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 49 components and 0.155365 Jy
! Inverting map 
! Added new window around map position (-1, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295196 Jy
! Component: 100  -  total flux cleaned = 0.00520474 Jy
! Component: 150  -  total flux cleaned = 0.00703935 Jy
! Component: 200  -  total flux cleaned = 0.00860951 Jy
! Total flux subtracted in 200 components = 0.00860951 Jy
! Clean residual min=-0.001532 max=0.001246 Jy/beam
! Clean residual mean=0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.163975 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 72 components and 0.163975 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.588 mas, bpa=6.635 degrees
! Estimated noise=0.259231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171476 Jy
! Component: 100  -  total flux cleaned = 0.00252495 Jy
! Component: 150  -  total flux cleaned = 0.00324479 Jy
! Component: 200  -  total flux cleaned = 0.00387318 Jy
! Total flux subtracted in 200 components = 0.00387318 Jy
! Clean residual min=-0.001322 max=0.001470 Jy/beam
! Clean residual mean=0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.167848 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125339 Jy
! Component: 100  -  total flux cleaned = 0.0019105 Jy
! Component: 150  -  total flux cleaned = 0.00239298 Jy
! Component: 200  -  total flux cleaned = 0.00275435 Jy
! Total flux subtracted in 200 components = 0.00275435 Jy
! Clean residual min=-0.001106 max=0.000933 Jy/beam
! Clean residual mean=-0.000000 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.170602 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 147 components and 0.170602 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.009 mas, bpa=16.81 degrees
! Estimated noise=0.223996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338266 Jy
! Component: 100  -  total flux cleaned = 0.000624204 Jy
! Component: 150  -  total flux cleaned = 0.000828688 Jy
! Component: 200  -  total flux cleaned = 0.00107087 Jy
! Total flux subtracted in 200 components = 0.00107087 Jy
! Clean residual min=-0.001074 max=0.001085 Jy/beam
! Clean residual mean=-0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.171673 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 174 components and 0.171673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059219Jy  sigma=1.326351
! Fit after  self-cal, rms=0.059209Jy  sigma=1.326210
wmodel /J1616+3621_X_map.mod
! wmodel: Unable to open new model file: /J1616+3621_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1616+3621_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.167 x 2.009 at 16.81 degrees (North through East)
! Clean map  min=-0.0010514  max=0.10477 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1616+3621_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.104767 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000235214 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.673536 0.673536 1.34707 2.69414 5.38829 10.7766 21.5531 43.1063 86.2126
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.104 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  445.41 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1616+3621_X_dfm.log closed on Thu May 19 18:46:49 2016