! Started logfile: /scr/pima/bg219e_uvs/J1609-2205_X_uvs.log on Thu Apr  7 09:12:45 2016
obs /scr/pima/bg219e_uvs/J1609-2205_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1609-2205_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.875448 visibilities/baseline/integration-bin.
! Found source: J1609-2205
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23448 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1609-2205_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.004432Jy  sigma=22.506909
! Fit after  self-cal, rms=0.921662Jy  sigma=20.604540
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8652 mas, bmaj=3.133 mas, bpa=13.83 degrees
! Estimated noise=0.532621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0572599 Jy
! Component: 100  -  total flux cleaned = 0.080071 Jy
! Total flux subtracted in 100 components = 0.080071 Jy
! Clean residual min=-0.006275 max=0.012860 Jy/beam
! Clean residual mean=-0.000022 rms=0.001978 Jy/beam
! Combined flux in latest and established models = 0.080071 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.080071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071272Jy  sigma=1.512681
! Fit after  self-cal, rms=0.070545Jy  sigma=1.497707
! Inverting map 
! Added new window around map position (-1.6, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015042 Jy
! Component: 100  -  total flux cleaned = 0.0247853 Jy
! Total flux subtracted in 100 components = 0.0247853 Jy
! Clean residual min=-0.004324 max=0.005272 Jy/beam
! Clean residual mean=-0.000010 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.104856 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 0.104856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066130Jy  sigma=1.386935
! Fit after  self-cal, rms=0.065870Jy  sigma=1.382897
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00777735 Jy
! Component: 100  -  total flux cleaned = 0.0128401 Jy
! Total flux subtracted in 100 components = 0.0128401 Jy
! Clean residual min=-0.003474 max=0.003611 Jy/beam
! Clean residual mean=-0.000004 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.117696 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 47 components and 0.117696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064602Jy  sigma=1.352214
! Fit after  self-cal, rms=0.064450Jy  sigma=1.350544
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.091 mas, bmaj=3.539 mas, bpa=12.04 degrees
! Estimated noise=0.292554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596771 Jy
! Component: 100  -  total flux cleaned = 0.00953242 Jy
! Component: 150  -  total flux cleaned = 0.0119904 Jy
! Component: 200  -  total flux cleaned = 0.013751 Jy
! Total flux subtracted in 200 components = 0.013751 Jy
! Clean residual min=-0.001922 max=0.002673 Jy/beam
! Clean residual mean=-0.000003 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.131447 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 73 components and 0.131447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063825Jy  sigma=1.336229
! Fit after  self-cal, rms=0.063689Jy  sigma=1.334689
! Inverting map 
! Added new window around map position (-3.6, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276163 Jy
! Component: 100  -  total flux cleaned = 0.00412961 Jy
! Component: 150  -  total flux cleaned = 0.00431873 Jy
! Component: 200  -  total flux cleaned = 0.00451759 Jy
! Total flux subtracted in 200 components = 0.00451759 Jy
! Clean residual min=-0.001674 max=0.001570 Jy/beam
! Clean residual mean=-0.000002 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.135965 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.135965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063539Jy  sigma=1.331764
! Fit after  self-cal, rms=0.063497Jy  sigma=1.331298
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.091 x 3.539 at 12.04 degrees (North through East)
! Clean map  min=-0.0015541  max=0.072942 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        1.01     
!   LA        0.99     NL        0.99     OV        1.02     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.08     KP        0.98     
!   LA        1.01     NL        1.01     OV        1.01     PT        1.03     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.98     NL        1.00     OV        0.99     PT        1.03     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.92     KP        0.99     
!   LA        0.98     NL        1.02     OV        1.01     PT        1.02     
!   SC        0.93     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.94     KP        0.99     
!   LA        1.03     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.91     KP        0.97     
!   LA        1.01     NL        1.00     OV        0.96     PT        0.94     
!   SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.93     
!   LA        1.02     NL        1.06     OV        1.03     PT        1.02     
!   SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063497Jy  sigma=1.331298
! Fit after  self-cal, rms=0.061835Jy  sigma=1.328826
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=3.522 mas, bpa=12.18 degrees
! Estimated noise=0.28838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000221175 Jy
! Component: 100  -  total flux cleaned = 0.000478983 Jy
! Component: 150  -  total flux cleaned = 0.000599599 Jy
! Component: 200  -  total flux cleaned = 0.00062519 Jy
! Total flux subtracted in 200 components = 0.00062519 Jy
! Clean residual min=-0.001582 max=0.001495 Jy/beam
! Clean residual mean=-0.000003 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.13659 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 109 components and 0.13659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061792Jy  sigma=1.328076
! Fit after  self-cal, rms=0.061736Jy  sigma=1.327737
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061736Jy  sigma=1.327737
! Fit after  self-cal, rms=0.061607Jy  sigma=1.327724
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=3.521 mas, bpa=12.22 degrees
! Estimated noise=0.287758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.39459e-05 Jy
! Component: 100  -  total flux cleaned = 0.000272222 Jy
! Component: 150  -  total flux cleaned = 0.000297156 Jy
! Component: 200  -  total flux cleaned = 0.000320892 Jy
! Total flux subtracted in 200 components = 0.000320892 Jy
! Clean residual min=-0.001574 max=0.001503 Jy/beam
! Clean residual mean=-0.000003 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.136911 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 120 components and 0.136911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061576Jy  sigma=1.327218
! Fit after  self-cal, rms=0.061553Jy  sigma=1.327115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.77673e-06 Jy
! Component: 100  -  total flux cleaned = 0.000130611 Jy
! Component: 150  -  total flux cleaned = 0.000108679 Jy
! Component: 200  -  total flux cleaned = 0.000108833 Jy
! Total flux subtracted in 200 components = 0.000108833 Jy
! Clean residual min=-0.001532 max=0.001487 Jy/beam
! Clean residual mean=-0.000003 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.13702 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.13702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061532Jy  sigma=1.326783
! Fit after  self-cal, rms=0.061515Jy  sigma=1.326728
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061515Jy  sigma=1.326728
! Fit after  self-cal, rms=0.061409Jy  sigma=1.324514
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=3.526 mas, bpa=12.31 degrees
! Estimated noise=0.287029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173075 Jy
! Component: 100  -  total flux cleaned = 0.000197833 Jy
! Component: 150  -  total flux cleaned = 0.000216936 Jy
! Component: 200  -  total flux cleaned = 0.000198854 Jy
! Total flux subtracted in 200 components = 0.000198854 Jy
! Clean residual min=-0.001425 max=0.001398 Jy/beam
! Clean residual mean=-0.000003 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.137219 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 133 components and 0.137219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061392Jy  sigma=1.324214
! Fit after  self-cal, rms=0.061386Jy  sigma=1.324078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.40676e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123092 Jy
! Component: 150  -  total flux cleaned = 9.02515e-05 Jy
! Component: 200  -  total flux cleaned = 5.92001e-05 Jy
! Total flux subtracted in 200 components = 5.92001e-05 Jy
! Clean residual min=-0.001405 max=0.001402 Jy/beam
! Clean residual mean=-0.000003 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.137278 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 138 components and 0.137278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061374Jy  sigma=1.323896
! Fit after  self-cal, rms=0.061363Jy  sigma=1.323865
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061363Jy  sigma=1.323865
! Fit after  self-cal, rms=0.061317Jy  sigma=1.323830
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.263 mas, bmaj=4.974 mas, bpa=1.353 degrees
! Estimated noise=0.335815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000481103 Jy
! Component: 100  -  total flux cleaned = 0.000587599 Jy
! Component: 150  -  total flux cleaned = 0.000625772 Jy
! Component: 200  -  total flux cleaned = 0.00064837 Jy
! Total flux subtracted in 200 components = 0.00064837 Jy
! Clean residual min=-0.001159 max=0.001345 Jy/beam
! Clean residual mean=-0.000005 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.137926 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 149 components and 0.137926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061312Jy  sigma=1.323754
! Fit after  self-cal, rms=0.061311Jy  sigma=1.323729
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.3232e-05 Jy
! Component: 100  -  total flux cleaned = 0.000150114 Jy
! Component: 150  -  total flux cleaned = 0.000160349 Jy
! Component: 200  -  total flux cleaned = 0.000141456 Jy
! Total flux subtracted in 200 components = 0.000141456 Jy
! Clean residual min=-0.001158 max=0.001326 Jy/beam
! Clean residual mean=-0.000004 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.138068 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 155 components and 0.138068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061307Jy  sigma=1.323684
! Fit after  self-cal, rms=0.061306Jy  sigma=1.323672
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=3.526 mas, bpa=12.41 degrees
! Estimated noise=0.286595 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.077 x 3.526 at 12.41 degrees (North through East)
! Clean map  min=-0.0012486  max=0.071007 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8573 mas, bmaj=3.131 mas, bpa=14.14 degrees
! Estimated noise=0.518313 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0567111 Jy
! Component: 100  -  total flux cleaned = 0.0818694 Jy
! Component: 150  -  total flux cleaned = 0.0969605 Jy
! Component: 200  -  total flux cleaned = 0.106905 Jy
! Total flux subtracted in 200 components = 0.106905 Jy
! Clean residual min=-0.004478 max=0.005479 Jy/beam
! Clean residual mean=-0.000010 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.106905 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.106905 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=3.526 mas, bpa=12.41 degrees
! Estimated noise=0.286595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00986813 Jy
! Component: 100  -  total flux cleaned = 0.0160516 Jy
! Component: 150  -  total flux cleaned = 0.020348 Jy
! Component: 200  -  total flux cleaned = 0.0234825 Jy
! Total flux subtracted in 200 components = 0.0234825 Jy
! Clean residual min=-0.001836 max=0.001835 Jy/beam
! Clean residual mean=-0.000006 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.130388 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 87 components and 0.130388 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.263 mas, bmaj=4.974 mas, bpa=1.353 degrees
! Estimated noise=0.335815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298423 Jy
! Component: 100  -  total flux cleaned = 0.00482421 Jy
! Component: 150  -  total flux cleaned = 0.0060874 Jy
! Component: 200  -  total flux cleaned = 0.00668961 Jy
! Total flux subtracted in 200 components = 0.00668961 Jy
! Clean residual min=-0.001468 max=0.001483 Jy/beam
! Clean residual mean=-0.000005 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.137077 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308054 Jy
! Component: 100  -  total flux cleaned = 0.00052367 Jy
! Component: 150  -  total flux cleaned = 0.000643618 Jy
! Component: 200  -  total flux cleaned = 0.000709682 Jy
! Total flux subtracted in 200 components = 0.000709682 Jy
! Clean residual min=-0.001320 max=0.001428 Jy/beam
! Clean residual mean=-0.000005 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.137787 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 130 components and 0.137787 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=3.526 mas, bpa=12.41 degrees
! Estimated noise=0.286595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000464152 Jy
! Component: 100  -  total flux cleaned = -0.000510085 Jy
! Component: 150  -  total flux cleaned = -0.000435136 Jy
! Component: 200  -  total flux cleaned = -0.000400954 Jy
! Total flux subtracted in 200 components = -0.000400954 Jy
! Clean residual min=-0.001479 max=0.001445 Jy/beam
! Clean residual mean=-0.000003 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.137386 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 147 components and 0.137386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061353Jy  sigma=1.324383
! Fit after  self-cal, rms=0.061360Jy  sigma=1.324081
wmodel /scr/pima/bg219e_uvs/J1609-2205_X_map.mod
! Writing 147 model components to file: /scr/pima/bg219e_uvs/J1609-2205_X_map.mod
wobs /scr/pima/bg219e_uvs/J1609-2205_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1609-2205_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1609-2205_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J1609-2205_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218204 Jy
! Component: 100  -  total flux cleaned = -0.000242776 Jy
! Component: 150  -  total flux cleaned = -0.000311455 Jy
! Component: 200  -  total flux cleaned = -0.000376884 Jy
! Component: 250  -  total flux cleaned = -0.000460756 Jy
! Component: 300  -  total flux cleaned = -0.00052166 Jy
! Component: 350  -  total flux cleaned = -0.000521489 Jy
! Component: 400  -  total flux cleaned = -0.000482976 Jy
! Component: 450  -  total flux cleaned = -0.000501383 Jy
! Component: 500  -  total flux cleaned = -0.000501146 Jy
! Component: 550  -  total flux cleaned = -0.000483521 Jy
! Component: 600  -  total flux cleaned = -0.000466247 Jy
! Component: 650  -  total flux cleaned = -0.000499841 Jy
! Component: 700  -  total flux cleaned = -0.000549298 Jy
! Component: 750  -  total flux cleaned = -0.000565541 Jy
! Component: 800  -  total flux cleaned = -0.000692528 Jy
! Component: 850  -  total flux cleaned = -0.000645289 Jy
! Component: 900  -  total flux cleaned = -0.000676338 Jy
! Component: 950  -  total flux cleaned = -0.000706985 Jy
! Component: 1000  -  total flux cleaned = -0.000751565 Jy
! Component: 1050  -  total flux cleaned = -0.000766207 Jy
! Component: 1100  -  total flux cleaned = -0.000867115 Jy
! Component: 1150  -  total flux cleaned = -0.000824431 Jy
! Component: 1200  -  total flux cleaned = -0.00093648 Jy
! Component: 1250  -  total flux cleaned = -0.000950068 Jy
! Component: 1300  -  total flux cleaned = -0.00103192 Jy
! Component: 1350  -  total flux cleaned = -0.00109908 Jy
! Component: 1400  -  total flux cleaned = -0.00113904 Jy
! Component: 1450  -  total flux cleaned = -0.00116538 Jy
! Component: 1500  -  total flux cleaned = -0.00120439 Jy
! Component: 1550  -  total flux cleaned = -0.00125561 Jy
! Component: 1600  -  total flux cleaned = -0.00131876 Jy
! Component: 1650  -  total flux cleaned = -0.00134369 Jy
! Component: 1700  -  total flux cleaned = -0.00139298 Jy
! Component: 1750  -  total flux cleaned = -0.00141732 Jy
! Component: 1800  -  total flux cleaned = -0.00142947 Jy
! Component: 1850  -  total flux cleaned = -0.00147707 Jy
! Component: 1900  -  total flux cleaned = -0.00147686 Jy
! Component: 1950  -  total flux cleaned = -0.00148846 Jy
! Component: 2000  -  total flux cleaned = -0.00150008 Jy
! Component: 2050  -  total flux cleaned = -0.00150007 Jy
! Component: 2100  -  total flux cleaned = -0.00154517 Jy
! Component: 2150  -  total flux cleaned = -0.00148929 Jy
! Component: 2200  -  total flux cleaned = -0.00152253 Jy
! Component: 2250  -  total flux cleaned = -0.0014787 Jy
! Component: 2300  -  total flux cleaned = -0.00146802 Jy
! Component: 2350  -  total flux cleaned = -0.00152179 Jy
! Component: 2400  -  total flux cleaned = -0.00147912 Jy
! Component: 2450  -  total flux cleaned = -0.00147929 Jy
! Component: 2500  -  total flux cleaned = -0.00151064 Jy
! Component: 2550  -  total flux cleaned = -0.00146916 Jy
! Component: 2600  -  total flux cleaned = -0.00145887 Jy
! Component: 2650  -  total flux cleaned = -0.00143858 Jy
! Component: 2700  -  total flux cleaned = -0.00148906 Jy
! Component: 2750  -  total flux cleaned = -0.00145894 Jy
! Component: 2800  -  total flux cleaned = -0.00145894 Jy
! Component: 2850  -  total flux cleaned = -0.00147866 Jy
! Component: 2900  -  total flux cleaned = -0.00149815 Jy
! Component: 2950  -  total flux cleaned = -0.00153687 Jy
! Component: 3000  -  total flux cleaned = -0.00152721 Jy
! Component: 3050  -  total flux cleaned = -0.00155596 Jy
! Component: 3100  -  total flux cleaned = -0.00156546 Jy
! Component: 3150  -  total flux cleaned = -0.00159358 Jy
! Component: 3200  -  total flux cleaned = -0.0015842 Jy
! Component: 3250  -  total flux cleaned = -0.00158423 Jy
! Component: 3300  -  total flux cleaned = -0.00158444 Jy
! Component: 3350  -  total flux cleaned = -0.00163931 Jy
! Component: 3400  -  total flux cleaned = -0.00163019 Jy
! Component: 3450  -  total flux cleaned = -0.00163922 Jy
! Component: 3500  -  total flux cleaned = -0.00166609 Jy
! Component: 3550  -  total flux cleaned = -0.00165722 Jy
! Component: 3600  -  total flux cleaned = -0.00167486 Jy
! Component: 3650  -  total flux cleaned = -0.00170112 Jy
! Component: 3700  -  total flux cleaned = -0.00170112 Jy
! Component: 3750  -  total flux cleaned = -0.00170986 Jy
! Component: 3800  -  total flux cleaned = -0.00176137 Jy
! Component: 3850  -  total flux cleaned = -0.00178697 Jy
! Component: 3900  -  total flux cleaned = -0.00180387 Jy
! Component: 3950  -  total flux cleaned = -0.00182076 Jy
! Component: 4000  -  total flux cleaned = -0.00186257 Jy
! Component: 4050  -  total flux cleaned = -0.00185424 Jy
! Total flux subtracted in 4096 components = -0.0018956 Jy
! Clean residual min=-0.000660 max=0.000586 Jy/beam
! Clean residual mean=-0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.13549 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 412 components and 0.13549 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1609-2205_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.077 x 3.526 at 12.41 degrees (North through East)
! Clean map  min=-0.0013017  max=0.07102 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1609-2205_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0710196 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000142 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.599834 0.599834 1.19967 2.39934 4.79867 9.59734 19.1947 38.3894 76.7787
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  500.138 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1609-2205_X_uvs.log closed on Thu Apr  7 09:12:49 2016