! Started logfile: /scr/pima/bg219e_uvs/J1609-2205_S_dfm.log on Thu May 19 18:46:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1609-2205_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1609-2205_S_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.840054 visibilities/baseline/integration-bin.
! Found source: J1609-2205
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1609-2205_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025753Jy  sigma=18.414735
! Fit after  self-cal, rms=0.854217Jy  sigma=15.203112
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.541 mas, bmaj=11.77 mas, bpa=6.735 degrees
! Estimated noise=0.698256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101184 Jy
! Component: 100  -  total flux cleaned = 0.145275 Jy
! Total flux subtracted in 100 components = 0.145275 Jy
! Clean residual min=-0.007370 max=0.021183 Jy/beam
! Clean residual mean=-0.000010 rms=0.002854 Jy/beam
! Combined flux in latest and established models = 0.145275 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.145275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089873Jy  sigma=1.584202
! Fit after  self-cal, rms=0.089119Jy  sigma=1.575960
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250759 Jy
! Component: 100  -  total flux cleaned = 0.0392906 Jy
! Total flux subtracted in 100 components = 0.0392906 Jy
! Clean residual min=-0.004476 max=0.008618 Jy/beam
! Clean residual mean=-0.000007 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 0.184565 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 42 components and 0.184565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078297Jy  sigma=1.351477
! Fit after  self-cal, rms=0.078145Jy  sigma=1.350353
! Inverting map 
! Added new window around map position (-4.5, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00964839 Jy
! Component: 100  -  total flux cleaned = 0.0157956 Jy
! Total flux subtracted in 100 components = 0.0157956 Jy
! Clean residual min=-0.003646 max=0.005062 Jy/beam
! Clean residual mean=-0.000006 rms=0.001060 Jy/beam
! Combined flux in latest and established models = 0.200361 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.200361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076226Jy  sigma=1.308585
! Fit after  self-cal, rms=0.076179Jy  sigma=1.308063
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.49 mas, bmaj=14.01 mas, bpa=7.084 degrees
! Estimated noise=0.495401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076408 Jy
! Component: 100  -  total flux cleaned = 0.0118291 Jy
! Component: 150  -  total flux cleaned = 0.0144416 Jy
! Component: 200  -  total flux cleaned = 0.0161324 Jy
! Total flux subtracted in 200 components = 0.0161324 Jy
! Clean residual min=-0.002977 max=0.002255 Jy/beam
! Clean residual mean=-0.000018 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.216493 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 120 components and 0.216493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075489Jy  sigma=1.291954
! Fit after  self-cal, rms=0.075477Jy  sigma=1.291615
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.49 x 14.01 at 7.084 degrees (North through East)
! Clean map  min=-0.002919  max=0.14686 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.04     KP        0.99     
!   LA        1.00     NL        1.02     OV        1.00     PT        0.92     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.07     KP        0.99     
!   LA        1.01     NL        1.02     OV        0.97     PT        1.00     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.01     NL        1.02     OV        0.98     PT        1.03     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        1.01     
!   LA        0.99     NL        1.00     OV        1.01     PT        1.02     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.075477Jy  sigma=1.291615
! Fit after  self-cal, rms=0.075372Jy  sigma=1.286635
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.489 mas, bmaj=14.04 mas, bpa=7.269 degrees
! Estimated noise=0.494062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000581552 Jy
! Component: 100  -  total flux cleaned = 0.000645671 Jy
! Component: 150  -  total flux cleaned = 0.000699949 Jy
! Component: 200  -  total flux cleaned = 0.000746176 Jy
! Total flux subtracted in 200 components = 0.000746176 Jy
! Clean residual min=-0.002558 max=0.001862 Jy/beam
! Clean residual mean=-0.000012 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.217239 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 129 components and 0.217239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075360Jy  sigma=1.286468
! Fit after  self-cal, rms=0.075375Jy  sigma=1.286396
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075375Jy  sigma=1.286396
! Fit after  self-cal, rms=0.075407Jy  sigma=1.286379
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.487 mas, bmaj=14.03 mas, bpa=7.321 degrees
! Estimated noise=0.494243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349205 Jy
! Component: 100  -  total flux cleaned = 0.000398703 Jy
! Component: 150  -  total flux cleaned = 0.000442169 Jy
! Component: 200  -  total flux cleaned = 0.000468348 Jy
! Total flux subtracted in 200 components = 0.000468348 Jy
! Clean residual min=-0.002511 max=0.001860 Jy/beam
! Clean residual mean=-0.000012 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.217708 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 132 components and 0.217708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075400Jy  sigma=1.286290
! Fit after  self-cal, rms=0.075400Jy  sigma=1.286281
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.15003e-05 Jy
! Component: 100  -  total flux cleaned = 0.00012749 Jy
! Component: 150  -  total flux cleaned = 0.00014906 Jy
! Component: 200  -  total flux cleaned = 0.000159293 Jy
! Total flux subtracted in 200 components = 0.000159293 Jy
! Clean residual min=-0.002499 max=0.001871 Jy/beam
! Clean residual mean=-0.000012 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.217867 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 134 components and 0.217867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075396Jy  sigma=1.286242
! Fit after  self-cal, rms=0.075396Jy  sigma=1.286237
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075396Jy  sigma=1.286237
! Fit after  self-cal, rms=0.075118Jy  sigma=1.282712
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.496 mas, bmaj=13.96 mas, bpa=7.279 degrees
! Estimated noise=0.494553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000592402 Jy
! Component: 100  -  total flux cleaned = 0.00065531 Jy
! Component: 150  -  total flux cleaned = 0.000683062 Jy
! Component: 200  -  total flux cleaned = 0.000720922 Jy
! Total flux subtracted in 200 components = 0.000720922 Jy
! Clean residual min=-0.002376 max=0.001876 Jy/beam
! Clean residual mean=-0.000007 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.218588 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 146 components and 0.218588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075111Jy  sigma=1.282597
! Fit after  self-cal, rms=0.075119Jy  sigma=1.282533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.44651e-05 Jy
! Component: 100  -  total flux cleaned = 9.79525e-05 Jy
! Component: 150  -  total flux cleaned = 0.000118671 Jy
! Component: 200  -  total flux cleaned = 0.000157686 Jy
! Total flux subtracted in 200 components = 0.000157686 Jy
! Clean residual min=-0.002365 max=0.001857 Jy/beam
! Clean residual mean=-0.000007 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.218746 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 152 components and 0.218746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075116Jy  sigma=1.282488
! Fit after  self-cal, rms=0.075117Jy  sigma=1.282488
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075117Jy  sigma=1.282488
! Fit after  self-cal, rms=0.075077Jy  sigma=1.282455
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.093 mas, bmaj=18.37 mas, bpa=1.581 degrees
! Estimated noise=0.556593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000479411 Jy
! Component: 100  -  total flux cleaned = 0.000619259 Jy
! Component: 150  -  total flux cleaned = 0.000684864 Jy
! Component: 200  -  total flux cleaned = 0.000753675 Jy
! Total flux subtracted in 200 components = 0.000753675 Jy
! Clean residual min=-0.002144 max=0.001908 Jy/beam
! Clean residual mean=-0.000011 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.219499 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 158 components and 0.219499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075074Jy  sigma=1.282412
! Fit after  self-cal, rms=0.075077Jy  sigma=1.282407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.56184e-05 Jy
! Component: 100  -  total flux cleaned = 0.000135154 Jy
! Component: 150  -  total flux cleaned = 0.000180781 Jy
! Component: 200  -  total flux cleaned = 0.000222425 Jy
! Total flux subtracted in 200 components = 0.000222425 Jy
! Clean residual min=-0.002163 max=0.001907 Jy/beam
! Clean residual mean=-0.000011 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.219722 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 158 components and 0.219722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075075Jy  sigma=1.282400
! Fit after  self-cal, rms=0.075076Jy  sigma=1.282397
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.493 mas, bmaj=13.94 mas, bpa=7.32 degrees
! Estimated noise=0.494397 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.493 x 13.94 at 7.32 degrees (North through East)
! Clean map  min=-0.0022867  max=0.14498 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.54 mas, bmaj=11.69 mas, bpa=6.818 degrees
! Estimated noise=0.698012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101257 Jy
! Component: 100  -  total flux cleaned = 0.146521 Jy
! Component: 150  -  total flux cleaned = 0.171106 Jy
! Component: 200  -  total flux cleaned = 0.185543 Jy
! Total flux subtracted in 200 components = 0.185543 Jy
! Clean residual min=-0.005074 max=0.007573 Jy/beam
! Clean residual mean=-0.000004 rms=0.001388 Jy/beam
! Combined flux in latest and established models = 0.185543 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.185543 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.493 mas, bmaj=13.94 mas, bpa=7.32 degrees
! Estimated noise=0.494397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142539 Jy
! Component: 100  -  total flux cleaned = 0.0214803 Jy
! Component: 150  -  total flux cleaned = 0.0257076 Jy
! Component: 200  -  total flux cleaned = 0.0283296 Jy
! Total flux subtracted in 200 components = 0.0283296 Jy
! Clean residual min=-0.002577 max=0.002239 Jy/beam
! Clean residual mean=-0.000010 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.213872 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 98 components and 0.213872 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.093 mas, bmaj=18.37 mas, bpa=1.581 degrees
! Estimated noise=0.556593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228522 Jy
! Component: 100  -  total flux cleaned = 0.00361796 Jy
! Component: 150  -  total flux cleaned = 0.00444477 Jy
! Component: 200  -  total flux cleaned = 0.00496809 Jy
! Total flux subtracted in 200 components = 0.00496809 Jy
! Clean residual min=-0.002191 max=0.001879 Jy/beam
! Clean residual mean=-0.000012 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.21884 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205987 Jy
! Component: 100  -  total flux cleaned = 0.000293296 Jy
! Component: 150  -  total flux cleaned = 0.000372382 Jy
! Component: 200  -  total flux cleaned = 0.000424329 Jy
! Total flux subtracted in 200 components = 0.000424329 Jy
! Clean residual min=-0.002181 max=0.001867 Jy/beam
! Clean residual mean=-0.000011 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.219265 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 130 components and 0.219265 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.493 mas, bmaj=13.94 mas, bpa=7.32 degrees
! Estimated noise=0.494397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000372132 Jy
! Component: 100  -  total flux cleaned = -0.000374172 Jy
! Component: 150  -  total flux cleaned = -0.00033823 Jy
! Component: 200  -  total flux cleaned = -0.000305932 Jy
! Total flux subtracted in 200 components = -0.000305932 Jy
! Clean residual min=-0.002289 max=0.001820 Jy/beam
! Clean residual mean=-0.000007 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.218959 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 151 components and 0.218959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075094Jy  sigma=1.282700
! Fit after  self-cal, rms=0.075094Jy  sigma=1.282659
wmodel /J1609-2205_S_map.mod
! wmodel: Unable to open new model file: /J1609-2205_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1609-2205_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.493 x 13.94 at 7.32 degrees (North through East)
! Clean map  min=-0.0022563  max=0.14522 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1609-2205_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.145225 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000553183 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.14275 1.14275 2.28549 4.57098 9.14196 18.2839 36.5679 73.1357
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.145 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  262.525 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1609-2205_S_dfm.log closed on Thu May 19 18:46:28 2016