! Started logfile: /scr/pima/bg219e_uvs/J1604-2223_X_dfm.log on Thu May 19 18:45:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1604-2223_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1604-2223_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.862103 visibilities/baseline/integration-bin.
! Found source: J1604-2223
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10428 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1604-2223_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017601Jy  sigma=21.635602
! Fit after  self-cal, rms=0.857789Jy  sigma=18.042043
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8066 mas, bmaj=3.124 mas, bpa=14.17 degrees
! Estimated noise=0.693965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100434 Jy
! Component: 100  -  total flux cleaned = 0.136266 Jy
! Total flux subtracted in 100 components = 0.136266 Jy
! Clean residual min=-0.007761 max=0.018368 Jy/beam
! Clean residual mean=-0.000059 rms=0.002580 Jy/beam
! Combined flux in latest and established models = 0.136266 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.136266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082488Jy  sigma=1.708039
! Fit after  self-cal, rms=0.082279Jy  sigma=1.703450
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225303 Jy
! Component: 100  -  total flux cleaned = 0.0373304 Jy
! Total flux subtracted in 100 components = 0.0373304 Jy
! Clean residual min=-0.005697 max=0.008027 Jy/beam
! Clean residual mean=-0.000029 rms=0.001535 Jy/beam
! Combined flux in latest and established models = 0.173597 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 30 components and 0.173597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071926Jy  sigma=1.452500
! Fit after  self-cal, rms=0.071901Jy  sigma=1.451054
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=3.478 mas, bpa=12.16 degrees
! Estimated noise=0.369482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164402 Jy
! Component: 100  -  total flux cleaned = 0.0254716 Jy
! Component: 150  -  total flux cleaned = 0.0306106 Jy
! Component: 200  -  total flux cleaned = 0.0335663 Jy
! Total flux subtracted in 200 components = 0.0335663 Jy
! Clean residual min=-0.003916 max=0.008432 Jy/beam
! Clean residual mean=0.000001 rms=0.001297 Jy/beam
! Combined flux in latest and established models = 0.207163 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 57 components and 0.207163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068315Jy  sigma=1.364029
! Fit after  self-cal, rms=0.068339Jy  sigma=1.363481
! Inverting map 
! Added new window around map position (-5.8, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00862412 Jy
! Component: 100  -  total flux cleaned = 0.0128715 Jy
! Component: 150  -  total flux cleaned = 0.0158127 Jy
! Component: 200  -  total flux cleaned = 0.0181405 Jy
! Total flux subtracted in 200 components = 0.0181405 Jy
! Clean residual min=-0.002884 max=0.003170 Jy/beam
! Clean residual mean=-0.000001 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.225304 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 87 components and 0.225304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067298Jy  sigma=1.338512
! Fit after  self-cal, rms=0.067217Jy  sigma=1.336210
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.023 x 3.478 at 12.16 degrees (North through East)
! Clean map  min=-0.0027573  max=0.1452 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.93     PT        1.03     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.11     KP        1.00     
!   LA        0.98     NL        1.06     OV        0.96     PT        1.04     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        0.94     
!   LA        0.93     NL        0.97     OV        1.00     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.14     KP        0.95     
!   LA        0.98     NL        1.06     OV        1.02     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.06     KP        0.96     
!   LA        0.97     NL        1.02     OV        1.01     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.93     
!   LA        0.96     NL        1.07     OV        1.02     PT        1.05     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        1.08     KP        0.98     
!   LA        0.97     NL        0.96     OV        0.98     PT        0.92     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.00     KP        1.00     
!   LA        0.96     NL        1.05     OV        0.98     PT        1.03     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.95     NL        1.07     OV        1.01     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.09     KP        0.99     
!   LA        1.01     NL        1.01     OV        0.99     PT        1.04     
!   SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.00     KP        1.02     
!   LA        0.95     NL        1.08     OV        1.00     PT        1.03     
!   SC        1.12     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.96     KP        0.99     
!   LA        1.05     NL        1.00     OV        0.96     PT        0.99     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.067217Jy  sigma=1.336210
! Fit after  self-cal, rms=0.067864Jy  sigma=1.325182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.51 mas, bpa=12.26 degrees
! Estimated noise=0.370675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250991 Jy
! Component: 100  -  total flux cleaned = 0.0039404 Jy
! Component: 150  -  total flux cleaned = 0.00468717 Jy
! Component: 200  -  total flux cleaned = 0.00519138 Jy
! Total flux subtracted in 200 components = 0.00519138 Jy
! Clean residual min=-0.002313 max=0.002099 Jy/beam
! Clean residual mean=-0.000001 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.230495 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 115 components and 0.230495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067761Jy  sigma=1.322617
! Fit after  self-cal, rms=0.067777Jy  sigma=1.322291
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067777Jy  sigma=1.322291
! Fit after  self-cal, rms=0.067890Jy  sigma=1.322230
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.514 mas, bpa=12.29 degrees
! Estimated noise=0.370609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000784829 Jy
! Component: 100  -  total flux cleaned = 0.00108343 Jy
! Component: 150  -  total flux cleaned = 0.00123592 Jy
! Component: 200  -  total flux cleaned = 0.00139329 Jy
! Total flux subtracted in 200 components = 0.00139329 Jy
! Clean residual min=-0.002252 max=0.002063 Jy/beam
! Clean residual mean=-0.000001 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.231888 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 130 components and 0.231888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067869Jy  sigma=1.321679
! Fit after  self-cal, rms=0.067869Jy  sigma=1.321642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268817 Jy
! Component: 100  -  total flux cleaned = 0.000372392 Jy
! Component: 150  -  total flux cleaned = 0.000409279 Jy
! Component: 200  -  total flux cleaned = 0.000461717 Jy
! Total flux subtracted in 200 components = 0.000461717 Jy
! Clean residual min=-0.002222 max=0.002042 Jy/beam
! Clean residual mean=-0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.23235 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 135 components and 0.23235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067860Jy  sigma=1.321411
! Fit after  self-cal, rms=0.067860Jy  sigma=1.321396
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067860Jy  sigma=1.321396
! Fit after  self-cal, rms=0.068029Jy  sigma=1.316438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.513 mas, bpa=12.28 degrees
! Estimated noise=0.370694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245604 Jy
! Component: 100  -  total flux cleaned = 0.000225767 Jy
! Component: 150  -  total flux cleaned = 0.00022607 Jy
! Component: 200  -  total flux cleaned = 0.000242257 Jy
! Total flux subtracted in 200 components = 0.000242257 Jy
! Clean residual min=-0.001926 max=0.001841 Jy/beam
! Clean residual mean=-0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.232592 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 147 components and 0.232592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068018Jy  sigma=1.316244
! Fit after  self-cal, rms=0.068029Jy  sigma=1.316176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.6589e-05 Jy
! Component: 100  -  total flux cleaned = 8.25412e-05 Jy
! Component: 150  -  total flux cleaned = 8.27762e-05 Jy
! Component: 200  -  total flux cleaned = 9.64761e-05 Jy
! Total flux subtracted in 200 components = 9.64761e-05 Jy
! Clean residual min=-0.001917 max=0.001843 Jy/beam
! Clean residual mean=-0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.232689 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 150 components and 0.232689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068023Jy  sigma=1.316051
! Fit after  self-cal, rms=0.068023Jy  sigma=1.316042
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068023Jy  sigma=1.316042
! Fit after  self-cal, rms=0.068099Jy  sigma=1.316025
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.306 mas, bmaj=5.16 mas, bpa=-0.1859 degrees
! Estimated noise=0.435844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000653316 Jy
! Component: 100  -  total flux cleaned = 0.000859527 Jy
! Component: 150  -  total flux cleaned = 0.000916223 Jy
! Component: 200  -  total flux cleaned = 0.000980649 Jy
! Total flux subtracted in 200 components = 0.000980649 Jy
! Clean residual min=-0.001924 max=0.001675 Jy/beam
! Clean residual mean=-0.000001 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.233669 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 156 components and 0.233669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068100Jy  sigma=1.315974
! Fit after  self-cal, rms=0.068099Jy  sigma=1.315942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.86746e-05 Jy
! Component: 100  -  total flux cleaned = 0.000137083 Jy
! Component: 150  -  total flux cleaned = 0.000195977 Jy
! Component: 200  -  total flux cleaned = 0.000248806 Jy
! Total flux subtracted in 200 components = 0.000248806 Jy
! Clean residual min=-0.001911 max=0.001633 Jy/beam
! Clean residual mean=-0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.233918 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 160 components and 0.233918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068101Jy  sigma=1.315932
! Fit after  self-cal, rms=0.068100Jy  sigma=1.315910
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.515 mas, bpa=12.3 degrees
! Estimated noise=0.370659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.026 x 3.515 at 12.3 degrees (North through East)
! Clean map  min=-0.0018078  max=0.14487 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8078 mas, bmaj=3.143 mas, bpa=14.24 degrees
! Estimated noise=0.705123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101646 Jy
! Component: 100  -  total flux cleaned = 0.138148 Jy
! Component: 150  -  total flux cleaned = 0.160421 Jy
! Component: 200  -  total flux cleaned = 0.174761 Jy
! Total flux subtracted in 200 components = 0.174761 Jy
! Clean residual min=-0.005431 max=0.007717 Jy/beam
! Clean residual mean=-0.000026 rms=0.001489 Jy/beam
! Combined flux in latest and established models = 0.174761 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.174761 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.515 mas, bpa=12.3 degrees
! Estimated noise=0.370659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149947 Jy
! Component: 100  -  total flux cleaned = 0.0251312 Jy
! Component: 150  -  total flux cleaned = 0.0324029 Jy
! Component: 200  -  total flux cleaned = 0.0376612 Jy
! Total flux subtracted in 200 components = 0.0376612 Jy
! Clean residual min=-0.003110 max=0.003246 Jy/beam
! Clean residual mean=-0.000007 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.212422 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 60 components and 0.212422 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.306 mas, bmaj=5.16 mas, bpa=-0.1859 degrees
! Estimated noise=0.435844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00582938 Jy
! Component: 100  -  total flux cleaned = 0.00980615 Jy
! Component: 150  -  total flux cleaned = 0.012664 Jy
! Component: 200  -  total flux cleaned = 0.0147804 Jy
! Total flux subtracted in 200 components = 0.0147804 Jy
! Clean residual min=-0.002714 max=0.002064 Jy/beam
! Clean residual mean=-0.000004 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.227203 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158844 Jy
! Component: 100  -  total flux cleaned = 0.0028012 Jy
! Component: 150  -  total flux cleaned = 0.00373756 Jy
! Component: 200  -  total flux cleaned = 0.00446378 Jy
! Total flux subtracted in 200 components = 0.00446378 Jy
! Clean residual min=-0.002225 max=0.001740 Jy/beam
! Clean residual mean=-0.000003 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.231667 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 124 components and 0.231667 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.515 mas, bpa=12.3 degrees
! Estimated noise=0.370659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.07054e-05 Jy
! Component: 100  -  total flux cleaned = 0.000482911 Jy
! Component: 150  -  total flux cleaned = 0.000742109 Jy
! Component: 200  -  total flux cleaned = 0.000838059 Jy
! Total flux subtracted in 200 components = 0.000838059 Jy
! Clean residual min=-0.001969 max=0.001899 Jy/beam
! Clean residual mean=-0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.232505 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 143 components and 0.232505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068127Jy  sigma=1.316474
! Fit after  self-cal, rms=0.068119Jy  sigma=1.316367
wmodel /J1604-2223_X_map.mod
! wmodel: Unable to open new model file: /J1604-2223_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1604-2223_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.026 x 3.515 at 12.3 degrees (North through East)
! Clean map  min=-0.0018663  max=0.1451 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1604-2223_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.145097 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000459837 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.950751 0.950751 1.9015 3.80301 7.60601 15.212 30.424 60.8481
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.145 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  315.539 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1604-2223_X_dfm.log closed on Thu May 19 18:45:53 2016